As Xiaojun reported the ltp of migrate_pages01 will fail on arm64 system
which has 4 nodes[0...3], all have memory and CONFIG_NODES_SHIFT=2:

  migrate_pages01    0  TINFO  :  test_invalid_nodes
  migrate_pages01   14  TFAIL  :  migrate_pages_common.c:45: unexpected failure - returned value = 0, expected: -1
  migrate_pages01   15  TFAIL  :  migrate_pages_common.c:55: call succeeded unexpectedly

In this case the test_invalid_nodes of migrate_pages01 will call:
SYSC_migrate_pages as:

  migrate_pages(0, , {0x0000000000000001}, 64, , {0x0000000000000010}, 64) = 0

The new nodes specifies one or more node IDs that are greater than the
maximum supported node ID, however, the errno is not set to EINVAL as
expected.

As man pages of set_mempolicy[1], mbind[2], and migrate_pages[3]
mentioned, when nodemask specifies one or more node IDs that are greater
than the maximum supported node ID, the errno should set to EINVAL.
However, get_nodes only check whether the part of bits
[BITS_PER_LONG*BITS_TO_LONGS(MAX_NUMNODES), maxnode) is zero or not, and
remain [MAX_NUMNODES, BITS_PER_LONG*BITS_TO_LONGS(MAX_NUMNODES)
unchecked.

This patch is to check the bits of [MAX_NUMNODES, maxnode) in get_nodes
to let migrate_pages set the errno to EINVAL when nodemask specifies one
or more node IDs that are greater than the maximum supported node ID,
which follows the manpage's guide.

[1] http://man7.org/linux/man-pages/man2/set_mempolicy.2.html
[2] http://man7.org/linux/man-pages/man2/mbind.2.html
[3] http://man7.org/linux/man-pages/man2/migrate_pages.2.html

Link: http://lkml.kernel.org/r/1510882624-44342-3-git-send-email-xieyisheng1@huawei.comSigned-off-by: NYisheng Xie <xieyisheng1@huawei.com>
Reported-by: NTan Xiaojun <tanxiaojun@huawei.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chris Salls <salls@cs.ucsb.edu>
Cc: Christopher Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have already checked whether maxnode is a page worth of bits, by:
    maxnode > PAGE_SIZE*BITS_PER_BYTE

So no need to check it once more.

Link: http://lkml.kernel.org/r/1510882624-44342-2-git-send-email-xieyisheng1@huawei.comSigned-off-by: NYisheng Xie <xieyisheng1@huawei.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Chris Salls <salls@cs.ucsb.edu>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no need to have ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT, as all
the page initialization code is in common code.

Also, there is no need to depend on MEMORY_HOTPLUG, as initialization
code does not really use hotplug memory functionality.  So, we can
remove this requirement as well.

This patch allows to use deferred struct page initialization on all
platforms with memblock allocator.

Tested on x86, arm64, and sparc.  Also, verified that code compiles on
PPC with CONFIG_MEMORY_HOTPLUG disabled.

Link: http://lkml.kernel.org/r/20171117014601.31606-1-pasha.tatashin@oracle.comSigned-off-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>	[s390]
Reviewed-by: NKhalid Aziz <khalid.aziz@oracle.com>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Zswap is a cache which compresses the pages that are being swapped out
and stores them into a dynamically allocated RAM-based memory pool.
Experiments have shown that around 10-20% of pages stored in zswap are
same-filled pages (i.e.  contents of the page are all same), but these
pages are handled as normal pages by compressing and allocating memory
in the pool.

This patch adds a check in zswap_frontswap_store() to identify
same-filled page before compression of the page.  If the page is a
same-filled page, set zswap_entry.length to zero, save the same-filled
value and skip the compression of the page and alloction of memory in
zpool.  In zswap_frontswap_load(), check if value of zswap_entry.length
is zero corresponding to the page to be loaded.  If zswap_entry.length
is zero, fill the page with same-filled value.  This saves the
decompression time during load.

On a ARM Quad Core 32-bit device with 1.5GB RAM by launching and
relaunching different applications, out of ~64000 pages stored in zswap,
~11000 pages were same-value filled pages (including zero-filled pages)
and ~9000 pages were zero-filled pages.

An average of 17% of pages(including zero-filled pages) in zswap are
same-value filled pages and 14% pages are zero-filled pages.  An average
of 3% of pages are same-filled non-zero pages.

The below table shows the execution time profiling with the patch.

                            Baseline    With patch  % Improvement
  -----------------------------------------------------------------
  *Zswap Store Time           26.5ms       18ms          32%
   (of same value pages)
  *Zswap Load Time
   (of same value pages)      25.5ms       13ms          49%
  -----------------------------------------------------------------

On Ubuntu PC with 2GB RAM, while executing kernel build and other test
scripts and running multimedia applications, out of 360000 pages stored
in zswap 78000(~22%) of pages were found to be same-value filled pages
(including zero-filled pages) and 64000(~17%) are zero-filled pages.  So
an average of %5 of pages are same-filled non-zero pages.

The below table shows the execution time profiling with the patch.

                            Baseline    With patch  % Improvement
  -----------------------------------------------------------------
  *Zswap Store Time           91ms        74ms           19%
   (of same value pages)
  *Zswap Load Time            50ms        7.5ms          85%
   (of same value pages)
  -----------------------------------------------------------------

*The execution times may vary with test device used.

Dan said:

: I did test this patch out this week, and I added some instrumentation to
: check the performance impact, and tested with a small program to try to
: check the best and worst cases.
:
: When doing a lot of swap where all (or almost all) pages are same-value, I
: found this patch does save both time and space, significantly.  The exact
: improvement in time and space depends on which compressor is being used,
: but roughly agrees with the numbers you listed.
:
: In the worst case situation, where all (or almost all) pages have the
: same-value *except* the final long (meaning, zswap will check each long on
: the entire page but then still have to pass the page to the compressor),
: the same-value check is around 10-15% of the total time spent in
: zswap_frontswap_store().  That's a not-insignificant amount of time, but
: it's not huge.  Considering that most systems will probably be swapping
: pages that aren't similar to the worst case (although I don't have any
: data to know that), I'd say the improvement is worth the possible
: worst-case performance impact.

[srividya.dr@samsung.com: add memset_l instead of for loop]
Link: http://lkml.kernel.org/r/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1Signed-off-by: NSrividya Desireddy <srividya.dr@samsung.com>
Acked-by: NDan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Dinakar Reddy Pathireddy <dinakar.p@samsung.com>
Cc: SHARAN ALLUR <sharan.allur@samsung.com>
Cc: RAJIB BASU <rajib.basu@samsung.com>
Cc: JUHUN KIM <juhunkim@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Timofey Titovets <nefelim4ag@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Preempt counter APIs have been split out, currently, hardirq.h just
includes irq_enter/exit APIs which are not used by kmemleak at all.

So, remove the unused hardirq.h.

Link: http://lkml.kernel.org/r/1510959741-31109-1-git-send-email-yang.s@alibaba-inc.comSigned-off-by: NYang Shi <yang.s@alibaba-inc.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mmdrop_async() is only used in fork.c.  Move that and its support
functions into fork.c, uninline it all.

Quite a lot of code gets moved around to avoid forward declarations.

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit d6e0b7fa ("slub: make dead caches discard free slabs
immediately") makes put_cpu_partial() run with preemption disabled and
interrupts disabled when calling unfreeze_partials().

The comment: "put_cpu_partial() is done without interrupts disabled and
without preemption disabled" looks obsolete, so remove it.

Link: http://lkml.kernel.org/r/1516968550-1520-1-git-send-email-miles.chen@mediatek.comSigned-off-by: NMiles Chen <miles.chen@mediatek.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Start address calculated for slab padding restoration was wrong.  Wrong
address would point to some section before padding and could cause
corruption

Link: http://lkml.kernel.org/r/1516604578-4577-1-git-send-email-balasubramani_vivekanandan@mentor.comSigned-off-by: NBalasubramani Vivekanandan <balasubramani_vivekanandan@mentor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

slab_state is being set to "UP" in create_kmalloc_caches(), and later on
we set it again in kmem_cache_init_late(), but slab_state does not
change in the meantime.

Remove the redundant assignment from kmem_cache_init_late().

And unless I overlooked anything, the same goes for "slab_state = FULL".
slab_state is set to "FULL" in kmem_cache_init_late(), but it is later
being set again in cpucache_init(), which gets called from
do_initcall_level().  So remove the assignment from cpucache_init() as
well.

Link: http://lkml.kernel.org/r/20171215134452.GA1920@techadventures.netSigned-off-by: NOscar Salvador <osalvador@techadventures.net>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

calculate_alignment() function is only used inside slab_common.c.  So
make it static and let the compiler do more optimizations.

After this patch there's a small improvement in text and data size.

  $ gcc --version
    gcc (GCC) 7.2.1 20171128

Before:
  text	   data	    bss	    dec	     hex	filename
  9890457  3828702  1212364 14931523 e3d643	vmlinux

After:
  text	   data	    bss	    dec	     hex	filename
  9890437  3828670  1212364 14931471 e3d60f	vmlinux

Also I fixed a style problem reported by checkpatch.

  WARNING: Missing a blank line after declarations
  #53: FILE: mm/slab_common.c:286:
  +		unsigned long ralign = cache_line_size();
  +		while (size <= ralign / 2)

Link: http://lkml.kernel.org/r/20171210080132.406-1-bhlee.kernel@gmail.comSigned-off-by: NByongho Lee <bhlee.kernel@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We should not reuse the dirty bh in jbd2 directly due to the following
situation:

1. When removing extent rec, we will dirty the bhs of extent rec and
   truncate log at the same time, and hand them over to jbd2.

2. The bhs are submitted to jbd2 area successfully.

3. The write-back thread of device help flush the bhs to disk but
   encounter write error due to abnormal storage link.

4. After a while the storage link become normal. Truncate log flush
   worker triggered by the next space reclaiming found the dirty bh of
   truncate log and clear its 'BH_Write_EIO' and then set it uptodate in
   __ocfs2_journal_access():

   ocfs2_truncate_log_worker
     ocfs2_flush_truncate_log
       __ocfs2_flush_truncate_log
         ocfs2_replay_truncate_records
           ocfs2_journal_access_di
             __ocfs2_journal_access // here we clear io_error and set 'tl_bh' uptodata.

5. Then jbd2 will flush the bh of truncate log to disk, but the bh of
   extent rec is still in error state, and unfortunately nobody will
   take care of it.

6. At last the space of extent rec was not reduced, but truncate log
   flush worker have given it back to globalalloc. That will cause
   duplicate cluster problem which could be identified by fsck.ocfs2.

Sadly we can hardly revert this but set fs read-only in case of ruining
atomicity and consistency of space reclaim.

Link: http://lkml.kernel.org/r/5A6E8092.8090701@huawei.com
Fixes: acf8fdbe ("ocfs2: do not BUG if buffer not uptodate in __ocfs2_journal_access")
Signed-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NYiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: NChangwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We should unlock bh_stat if bg->bg_free_bits_count > bg->bg_bits

Link: http://lkml.kernel.org/r/1516843095-23680-1-git-send-email-ge.changwei@h3c.comSigned-off-by: NChangwei Ge <ge.changwei@h3c.com>
Suggested-by: NJan Kara <jack@suse.cz>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return EAGAIN if any of the following checks fail for direct I/O:

 - Cannot get the related locks immediately

 - Blocks are not allocated at the write location, it will trigger block
   allocation and block IO operations.

[ghe@suse.com: v4]
  Link: http://lkml.kernel.org/r/1516007283-29932-4-git-send-email-ghe@suse.com
[ghe@suse.com: v2]
  Link: http://lkml.kernel.org/r/1511944612-9629-4-git-send-email-ghe@suse.com
Link: http://lkml.kernel.org/r/1511775987-841-4-git-send-email-ghe@suse.comSigned-off-by: NGang He <ghe@suse.com>
Reviewed-by: NAlex Chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add ocfs2_overwrite_io function, which is used to judge if overwrite
allocated blocks, otherwise, the write will bring extra block allocation
overhead.

[ghe@suse.com: v3]
  Link: http://lkml.kernel.org/r/1514455665-16325-3-git-send-email-ghe@suse.com
[ghe@suse.com: v2]
  Link: http://lkml.kernel.org/r/1511944612-9629-3-git-send-email-ghe@suse.com
Link: http://lkml.kernel.org/r/1511775987-841-3-git-send-email-ghe@suse.comSigned-off-by: NGang He <ghe@suse.com>
Reviewed-by: NChangwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "ocfs2: add nowait aio support", v4.

VFS layer has introduced the non-blocking aio flag IOCB_NOWAIT, which
tells the kernel to bail out if an AIO request will block for reasons
such as file allocations, or writeback triggering, or would block while
allocating requests while performing direct I/O.

Subsequently, pwritev2/preadv2 also can leverage this part of kernel
code.  So far, ext4/xfs/btrfs have supported this feature.  Add the
related code for the ocfs2 file system.

This patch (of 3):

Add ocfs2_try_rw_lock and ocfs2_try_inode_lock functions, which will be
used in non-blocking IO scenarios.

[ghe@suse.com: v2]
  Link: http://lkml.kernel.org/r/1511944612-9629-2-git-send-email-ghe@suse.com
Link: http://lkml.kernel.org/r/1511775987-841-2-git-send-email-ghe@suse.comSigned-off-by: NGang He <ghe@suse.com>
Reviewed-by: NJun Piao <piaojun@huawei.com>
Acked-by: Nalex chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ocfs2 supports trimming the underlying disk via the fstrim command.  But
there is a problem, ocfs2 is a shared disk cluster file system, if the
user configures a scheduled fstrim job on each file system node, this
will trigger multiple nodes trimming a shared disk simultaneously, which
is very wasteful for CPU and IO consumption.  This also might negatively
affect the lifetime of poor-quality SSD devices.

So we introduce a trimfs dlm lock to communicate with each other in this
case, which will make only one fstrim command to do the trimming on a
shared disk among the cluster.  The fstrim commands from the other nodes
should wait for the first fstrim to finish and return success directly,
to avoid running the same trim on the shared disk again.

Link: http://lkml.kernel.org/r/1513228484-2084-2-git-send-email-ghe@suse.comSigned-off-by: NGang He <ghe@suse.com>
Reviewed-by: NChangwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce a new dlm lock resource, which will be used to communicate
during fstrimming of an ocfs2 device from cluster nodes.

Link: http://lkml.kernel.org/r/1513228484-2084-1-git-send-email-ghe@suse.comSigned-off-by: NGang He <ghe@suse.com>
Reviewed-by: NChangwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A crash issue was reported by John Lightsey with a call trace as follows:

  ocfs2_split_extent+0x1ad3/0x1b40 [ocfs2]
  ocfs2_change_extent_flag+0x33a/0x470 [ocfs2]
  ocfs2_mark_extent_written+0x172/0x220 [ocfs2]
  ocfs2_dio_end_io+0x62d/0x910 [ocfs2]
  dio_complete+0x19a/0x1a0
  do_blockdev_direct_IO+0x19dd/0x1eb0
  __blockdev_direct_IO+0x43/0x50
  ocfs2_direct_IO+0x8f/0xa0 [ocfs2]
  generic_file_direct_write+0xb2/0x170
  __generic_file_write_iter+0xc3/0x1b0
  ocfs2_file_write_iter+0x4bb/0xca0 [ocfs2]
  __vfs_write+0xae/0xf0
  vfs_write+0xb8/0x1b0
  SyS_write+0x4f/0xb0
  system_call_fastpath+0x16/0x75

The BUG code told that extent tree wants to grow but no metadata was
reserved ahead of time.  From my investigation into this issue, the root
cause it that although enough metadata is not reserved, there should be
enough for following use.  Rightmost extent is merged into its left one
due to a certain times of marking extent written.  Because during
marking extent written, we got many physically continuous extents.  At
last, an empty extent showed up and the rightmost path is removed from
extent tree.

Add a new mechanism to reuse extent block cached in dealloc which were
just unlinked from extent tree to solve this crash issue.

Criteria is that during marking extents *written*, if extent rotation
and merging results in unlinking extent with growing extent tree later
without any metadata reserved ahead of time, try to reuse those extents
in dealloc in which deleted extents are cached.

Also, this patch addresses the issue John reported that ::dw_zero_count
is not calculated properly.

After applying this patch, the issue John reported was gone.  Thanks for
the reproducer provided by John.  And this patch has passed
ocfs2-test(29 cases) suite running by New H3C Group.

[ge.changwei@h3c.com: fix static checker warnning]
  Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373F29196AE@H3CMLB12-EX.srv.huawei-3com.com
[akpm@linux-foundation.org: brelse(NULL) is legal]
Link: http://lkml.kernel.org/r/1515479070-32653-2-git-send-email-ge.changwei@h3c.comSigned-off-by: NChangwei Ge <ge.changwei@h3c.com>
Reported-by: NJohn Lightsey <john@nixnuts.net>
Tested-by: NJohn Lightsey <john@nixnuts.net>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current code assume that ::w_unwritten_list always has only one item on.
This is not right and hard to get understood.  So improve how to count
unwritten item.

Link: http://lkml.kernel.org/r/1515479070-32653-1-git-send-email-ge.changwei@h3c.comSigned-off-by: NChangwei Ge <ge.changwei@h3c.com>
Reported-by: NJohn Lightsey <john@nixnuts.net>
Tested-by: NJohn Lightsey <john@nixnuts.net>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The race between *set_acl and *get_acl will cause getting incomplete
xattr data as below:

  processA                                    processB

  ocfs2_set_acl
    ocfs2_xattr_set
      __ocfs2_xattr_set_handle

                                              ocfs2_get_acl_nolock
                                                ocfs2_xattr_get_nolock:

processB may get incomplete xattr data if processA hasn't set_acl done.

So we should use 'ip_xattr_sem' to protect getting extended attribute in
ocfs2_get_acl_nolock(), as other processes could be changing it
concurrently.

Link: http://lkml.kernel.org/r/5A5DDCFF.7030001@huawei.comSigned-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NAlex Chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some stack variables are no longer used but still assigned.  Trim them.

Link: http://lkml.kernel.org/r/1516105069-12643-1-git-send-email-ge.changwei@h3c.comSigned-off-by: NChangwei Ge <ge.changwei@h3c.com>
Reviewed-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NAlex Chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need catch the errno returned by ocfs2_xattr_get_nolock() and assign
it to 'ret' for printing and noticing upper callers.

Link: http://lkml.kernel.org/r/5A571CAF.8050709@huawei.comSigned-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NAlex Chen <alex.chen@huawei.com>
Reviewed-by: NYiwen Jiang <jiangyiwen@huawei.com>
Acked-by: NGang He <ghe@suse.com>
Acked-by: NChangwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we can't get inode lock immediately in the function
ocfs2_inode_lock_with_page() when reading a page, we should not return
directly here, since this will lead to a softlockup problem when the
kernel is configured with CONFIG_PREEMPT is not set.  The method is to
get a blocking lock and immediately unlock before returning, this can
avoid CPU resource waste due to lots of retries, and benefits fairness
in getting lock among multiple nodes, increase efficiency in case
modifying the same file frequently from multiple nodes.

The softlockup crash (when set /proc/sys/kernel/softlockup_panic to 1)
looks like:

  Kernel panic - not syncing: softlockup: hung tasks
  CPU: 0 PID: 885 Comm: multi_mmap Tainted: G L 4.12.14-6.1-default #1
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  Call Trace:
    <IRQ>
    dump_stack+0x5c/0x82
    panic+0xd5/0x21e
    watchdog_timer_fn+0x208/0x210
    __hrtimer_run_queues+0xcc/0x200
    hrtimer_interrupt+0xa6/0x1f0
    smp_apic_timer_interrupt+0x34/0x50
    apic_timer_interrupt+0x96/0xa0
    </IRQ>
   RIP: 0010:unlock_page+0x17/0x30
   RSP: 0000:ffffaf154080bc88 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
   RAX: dead000000000100 RBX: fffff21e009f5300 RCX: 0000000000000004
   RDX: dead0000000000ff RSI: 0000000000000202 RDI: fffff21e009f5300
   RBP: 0000000000000000 R08: 0000000000000000 R09: ffffaf154080bb00
   R10: ffffaf154080bc30 R11: 0000000000000040 R12: ffff993749a39518
   R13: 0000000000000000 R14: fffff21e009f5300 R15: fffff21e009f5300
    ocfs2_inode_lock_with_page+0x25/0x30 [ocfs2]
    ocfs2_readpage+0x41/0x2d0 [ocfs2]
    filemap_fault+0x12b/0x5c0
    ocfs2_fault+0x29/0xb0 [ocfs2]
    __do_fault+0x1a/0xa0
    __handle_mm_fault+0xbe8/0x1090
    handle_mm_fault+0xaa/0x1f0
    __do_page_fault+0x235/0x4b0
    trace_do_page_fault+0x3c/0x110
    async_page_fault+0x28/0x30
   RIP: 0033:0x7fa75ded638e
   RSP: 002b:00007ffd6657db18 EFLAGS: 00010287
   RAX: 000055c7662fb700 RBX: 0000000000000001 RCX: 000055c7662fb700
   RDX: 0000000000001770 RSI: 00007fa75e909000 RDI: 000055c7662fb700
   RBP: 0000000000000003 R08: 000000000000000e R09: 0000000000000000
   R10: 0000000000000483 R11: 00007fa75ded61b0 R12: 00007fa75e90a770
   R13: 000000000000000e R14: 0000000000001770 R15: 0000000000000000

About performance improvement, we can see the testing time is reduced,
and CPU utilization decreases, the detailed data is as follows.  I ran
multi_mmap test case in ocfs2-test package in a three nodes cluster.

Before applying this patch:
    PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
   2754 ocfs2te+  20   0  170248   6980   4856 D 80.73 0.341   0:18.71 multi_mmap
   1505 root      rt   0  222236 123060  97224 S 2.658 6.015   0:01.44 corosync
      5 root      20   0       0      0      0 S 1.329 0.000   0:00.19 kworker/u8:0
     95 root      20   0       0      0      0 S 1.329 0.000   0:00.25 kworker/u8:1
   2728 root      20   0       0      0      0 S 0.997 0.000   0:00.24 jbd2/sda1-33
   2721 root      20   0       0      0      0 S 0.664 0.000   0:00.07 ocfs2dc-3C8CFD4
   2750 ocfs2te+  20   0  142976   4652   3532 S 0.664 0.227   0:00.28 mpirun

  ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared
  Tests with "-b 4096 -C 32768"
  Thu Dec 28 14:44:52 CST 2017
  multi_mmap..................................................Passed.
  Runtime 783 seconds.

After apply this patch:

    PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
   2508 ocfs2te+  20   0  170248   6804   4680 R 54.00 0.333   0:55.37 multi_mmap
    155 root      20   0       0      0      0 S 2.667 0.000   0:01.20 kworker/u8:3
     95 root      20   0       0      0      0 S 2.000 0.000   0:01.58 kworker/u8:1
   2504 ocfs2te+  20   0  142976   4604   3480 R 1.667 0.225   0:01.65 mpirun
      5 root      20   0       0      0      0 S 1.000 0.000   0:01.36 kworker/u8:0
   2482 root      20   0       0      0      0 S 1.000 0.000   0:00.86 jbd2/sda1-33
    299 root       0 -20       0      0      0 S 0.333 0.000   0:00.13 kworker/2:1H
    335 root       0 -20       0      0      0 S 0.333 0.000   0:00.17 kworker/1:1H
    535 root      20   0   12140   7268   1456 S 0.333 0.355   0:00.34 haveged
   1282 root      rt   0  222284 123108  97224 S 0.333 6.017   0:01.33 corosync

  ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared
  Tests with "-b 4096 -C 32768"
  Thu Dec 28 15:04:12 CST 2017
  multi_mmap..................................................Passed.
  Runtime 487 seconds.

Link: http://lkml.kernel.org/r/1514447305-30814-1-git-send-email-ghe@suse.com
Fixes: 1cce4df0 ("ocfs2: do not lock/unlock() inode DLM lock")
Signed-off-by: NGang He <ghe@suse.com>
Reviewed-by: NEric Ren <zren@suse.com>
Acked-by: Nalex chen <alex.chen@huawei.com>
Acked-by: Npiaojun <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If metadata is corrupted such as 'invalid inode block', we will get
failed by calling 'mount()' and then set filesystem readonly as below:

  ocfs2_mount
    ocfs2_initialize_super
      ocfs2_init_global_system_inodes
        ocfs2_iget
          ocfs2_read_locked_inode
            ocfs2_validate_inode_block
	      ocfs2_error
	        ocfs2_handle_error
	          ocfs2_set_ro_flag(osb, 0);  // set readonly

In this situation we need return -EROFS to 'mount.ocfs2', so that user
can fix it by fsck.  And then mount again.  In addition, 'mount.ocfs2'
should be updated correspondingly as it only return 1 for all errno.
And I will post a patch for 'mount.ocfs2' too.

Link: http://lkml.kernel.org/r/5A4302FA.2010606@huawei.comSigned-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NAlex Chen <alex.chen@huawei.com>
Reviewed-by: NJoseph Qi <jiangqi903@gmail.com>
Reviewed-by: NChangwei Ge <ge.changwei@h3c.com>
Reviewed-by: NGang He <ghe@suse.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Stack variable fe is no longer used, so trim it to save some CPU cycles
and stack space.

Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373F1F5A8DD@H3CMLB14-EX.srv.huawei-3com.comSigned-off-by: NChangwei Ge <ge.changwei@h3c.com>
Reviewed-by: NJoseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the OCFS2_XATTR_ROOT_SIZE macro improves the readability of the
code.

Link: http://lkml.kernel.org/r/5A2E2488.70301@huawei.comSigned-off-by: NAlex Chen <alex.chen@huawei.com>
Reviewed-by: NJun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When some nodes of cluster face with TCP connection fault, ocfs2 will
pick up a quorum to continue to work and other nodes will be fenced by
resetting host.

In order to decide which node should be fenced, ocfs2 leverages
o2quo_state::qs_holds.  If that variable is reduced to zero, then a try
to decide if fence local node is performed.  However, under a specific
scenario that local node is not disconnected from others at the same
time, above method has a problem to reduce ::qs_holds to zero.

Because, o2net 90s idle timer corresponding to different nodes is
triggered one after another.

  node 2			node 3
  90s idle timer elapses
  clear ::qs_conn_bm
  set hold
				40s is passed
				90 idle timer elapses
				clear ::qs_conn_bm
				set hold
  still up timer elapses
  clear hold (NOT to zero )
  90s idle timer elapses AGAIN
				still up timer elapses.
				clear hold
				still up timer elapses

To solve this issue, a node which has already be evicted from
::qs_conn_bm can't set hold again and again invoked from idle timer.

Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373F1F3F93B@H3CMLB12-EX.srv.huawei-3com.comSigned-off-by: NYang Zhang <zhang.yangB@h3c.com>
Signed-off-by: NChangwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add an obvious error message, due to mismatched cluster names between
on-disk and in the current cluster.  We can meet this case during OCFS2
cluster migration.

If we can give the user an obvious tip for why they can not mount the
file system after migration, they can quickly fix this mismatch problem.

Second, also move printing ocfs2_fill_super() errno to the front of
ocfs2_dismount_volume(), since ocfs2_dismount_volume() will also print
its own message.

I looked through all the code of OCFS2 (include o2cb); there is not any
place which returns this error.  In fact, the function calling path
ocfs2_fill_super -> ocfs2_mount_volume -> ocfs2_dlm_init ->
dlm_new_lockspace is a very specific one.  We can use this errno to give
the user a more clear tip, since this case is a little common during
cluster migration, but the customer can quickly get the failure cause if
there is a error printed.  Also, I think it is not possible to add this
errno in the o2cb path during ocfs2_dlm_init(), since the o2cb code has
been stable for a long time.

We only print this error tip when the user uses pcmk stack, since using
the o2cb stack the user will not meet this error.

[ghe@suse.com: v2]
  Link: http://lkml.kernel.org/r/1495419305-3780-1-git-send-email-ghe@suse.com
Link: http://lkml.kernel.org/r/1495089336-19312-1-git-send-email-ghe@suse.comSigned-off-by: NGang He <ghe@suse.com>
Reviewed-by: NMark Fasheh <mfasheh@versity.com>
Acked-by: NJoseph Qi <jiangqi903@gmail.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's odd that o2net_msg_handler::nh_func_data is declared as type
o2net_msg_handler_func*.  So neaten it.

Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373F1F554DA@H3CMLB14-EX.srv.huawei-3com.comSigned-off-by: NChangwei Ge <ge.changwei@h3c.com>
Reviewed-by: NJoseph Qi <jiangqi903@gmail.com>
Reviewed-by: NAlex Chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This code has been commented out for 12 years.  Remove it.

Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373CED7EF9E@H3CMLB14-EX.srv.huawei-3com.comSigned-off-by: NChangwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 7c2c11b2 ("arch: define weak abort()") has introduced a weak
abort() which is common for all arch.  And, so we will not need arch
specific abort which has the same code as the weak abort().  Remove the
abort() for m32r.

Link: http://lkml.kernel.org/r/1516912339-5665-1-git-send-email-sudipm.mukherjee@gmail.comSigned-off-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current find done in find_other_sources() excludes directories in
the kernel tree that are named 'include', eg.:

	./security/apparmor/include
	./security/selinux/include
	./drivers/net/wireless/broadcom/brcm80211/include
	./drivers/gpu/drm/amd/acp/include
	./drivers/gpu/drm/amd/display/include
	./drivers/gpu/drm/amd/include
	./drivers/gpu/drm/nouveau/include

This changes the find command in find_other_sources() to include those
using the -path option.

Link: http://lkml.kernel.org/r/1513335768-7852-1-git-send-email-arend.vanspriel@broadcom.comSigned-off-by: NArend van Spriel <arend.vanspriel@broadcom.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In case of running scripts/decodecode without any parameters in order to
give a copy'n'pasted Code line from, for example, email it would parse
only first line of it, while in emails it's split to few.

ie, when you have a file out of oops the Code line looks like

  Code: hh hh ... <hh> ... hh\n

When copy'n'paste from, for example, email where sender or some middle
MTA split it, the line looks like:

  Code: hh hh ... hh\n
  hh ... <hh> ... hh\n
  hh hh ... hh\n

The Code line followed by another oops line usually contains characters
out of hex digit + space + < + > set.

So add logic to join this split back if and only if the following lines
have hex digits, or spaces, or '<', or '>' characters.  It will be quite
unlikely to have a broken input in well formed Oops or dmesg, thus a
simple regex is being used.

Link: http://lkml.kernel.org/r/20171212100323.33201-1-andriy.shevchenko@linux.intel.comSigned-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

follow_pte_pmd() can theoretically return after having acquired a PMD
lock, even when DAX was not compiled with CONFIG_FS_DAX_PMD.

Release the PMD lock unconditionally.

Link: http://lkml.kernel.org/r/20180118133839.20587-1-jschoenh@amazon.de
Fixes: f729c8c9 ("dax: wrprotect pmd_t in dax_mapping_entry_mkclean")
Signed-off-by: NJan H. Schönherr <jschoenh@amazon.de>
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull RDMA subsystem updates from Jason Gunthorpe:
 "Overall this cycle did not have any major excitement, and did not
  require any shared branch with netdev.

  Lots of driver updates, particularly of the scale-up and performance
  variety. The largest body of core work was Parav's patches fixing and
  restructing some of the core code to make way for future RDMA
  containerization.

  Summary:

   - misc small driver fixups to
     bnxt_re/hfi1/qib/hns/ocrdma/rdmavt/vmw_pvrdma/nes

   - several major feature adds to bnxt_re driver: SRIOV VF RoCE
     support, HugePages support, extended hardware stats support, and
     SRQ support

   - a notable number of fixes to the i40iw driver from debugging scale
     up testing

   - more work to enable the new hip08 chip in the hns driver

   - misc small ULP fixups to srp/srpt//ipoib

   - preparation for srp initiator and target to support the RDMA-CM
     protocol for connections

   - add RDMA-CM support to srp initiator, srp target is still a WIP

   - fixes for a couple of places where ipoib could spam the dmesg log

   - fix encode/decode of FDR/EDR data rates in the core

   - many patches from Parav with ongoing work to clean up
     inconsistencies and bugs in RoCE support around the rdma_cm

   - mlx5 driver support for the userspace features 'thread domain',
     'wallclock timestamps' and 'DV Direct Connected transport'. Support
     for the firmware dual port rocee capability

   - core support for more than 32 rdma devices in the char dev
     allocation

   - kernel doc updates from Randy Dunlap

   - new netlink uAPI for inspecting RDMA objects similar in spirit to 'ss'

   - one minor change to the kobject code acked by Greg KH"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (259 commits)
  RDMA/nldev: Provide detailed QP information
  RDMA/nldev: Provide global resource utilization
  RDMA/core: Add resource tracking for create and destroy PDs
  RDMA/core: Add resource tracking for create and destroy CQs
  RDMA/core: Add resource tracking for create and destroy QPs
  RDMA/restrack: Add general infrastructure to track RDMA resources
  RDMA/core: Save kernel caller name when creating PD and CQ objects
  RDMA/core: Use the MODNAME instead of the function name for pd callers
  RDMA: Move enum ib_cq_creation_flags to uapi headers
  IB/rxe: Change RDMA_RXE kconfig to use select
  IB/qib: remove qib_keys.c
  IB/mthca: remove mthca_user.h
  RDMA/cm: Fix access to uninitialized variable
  RDMA/cma: Use existing netif_is_bond_master function
  IB/core: Avoid SGID attributes query while converting GID from OPA to IB
  RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure
  IB/umad: Fix use of unprotected device pointer
  IB/iser: Combine substrings for three messages
  IB/iser: Delete an unnecessary variable initialisation in iser_send_data_out()
  IB/iser: Delete an error message for a failed memory allocation in iser_send_data_out()
  ...

Pull dmaengine updates from Vinod Koul:
 "This time is smallish update with updates mainly to drivers:

   - updates to xilinx and zynqmp dma controllers

   - update reside calculation for rcar controller

   - more RSTify fixes for documentation

   - add support for race free transfer termination and updating for
     users for that

   - support for new rev of hidma with addition new APIs to get device
     match data in ACPI/OF

   - random updates to bunch of other drivers"

* tag 'dmaengine-4.16-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (47 commits)
  dmaengine: dmatest: fix container_of member in dmatest_callback
  dmaengine: stm32-dmamux: Remove unnecessary platform_get_resource() error check
  dmaengine: sprd: statify 'sprd_dma_prep_dma_memcpy'
  dmaengine: qcom_hidma: simplify DT resource parsing
  dmaengine: xilinx_dma: Free BD consistent memory
  dmaengine: xilinx_dma: Fix warning variable prev set but not used
  dmaengine: xilinx_dma: properly configure the SG mode bit in the driver for cdma
  dmaengine: doc: format struct fields using monospace
  dmaengine: doc: fix bullet list formatting
  dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63
  dmaengine: cppi41: Fix channel queues array size check
  dmaengine: imx-sdma: Add MODULE_FIRMWARE
  dmaengine: xilinx_dma: Fix typos
  dmaengine: xilinx_dma: Differentiate probe based on the ip type
  dmaengine: xilinx_dma: fix style issues from checkpatch
  dmaengine: xilinx_dma: Fix kernel doc warnings
  dmaengine: xilinx_dma: Fix race condition in the driver for multiple descriptor scenario
  dmaeninge: xilinx_dma: Fix bug in multiple frame stores scenario in vdma
  dmaengine: xilinx_dma: Check for channel idle state before submitting dma descriptor
  dmaengine: zynqmp_dma: Fix race condition in the probe
  ...

Pull dma mapping updates from Christoph Hellwig:
 "Except for a runtime warning fix from Christian this is all about
  consolidation of the generic no-IOMMU code, a well as the glue code
  for swiotlb.

  All the code is based on the x86 implementation with hooks to allow
  all architectures that aren't cache coherent to use it.

  The x86 conversion itself has been deferred because the x86
  maintainers were a little busy in the last months"

* tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits)
  MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb
  arm64: use swiotlb_alloc and swiotlb_free
  arm64: replace ZONE_DMA with ZONE_DMA32
  mips: use swiotlb_{alloc,free}
  mips/netlogic: remove swiotlb support
  tile: use generic swiotlb_ops
  tile: replace ZONE_DMA with ZONE_DMA32
  unicore32: use generic swiotlb_ops
  ia64: remove an ifdef around the content of pci-dma.c
  ia64: clean up swiotlb support
  ia64: use generic swiotlb_ops
  ia64: replace ZONE_DMA with ZONE_DMA32
  swiotlb: remove various exports
  swiotlb: refactor coherent buffer allocation
  swiotlb: refactor coherent buffer freeing
  swiotlb: wire up ->dma_supported in swiotlb_dma_ops
  swiotlb: add common swiotlb_map_ops
  swiotlb: rename swiotlb_free to swiotlb_exit
  x86: rename swiotlb_dma_ops
  powerpc: rename swiotlb_dma_ops
  ...

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual driver suspects: arcmsr,
  scsi_debug, mpt3sas, lpfc, cxlflash, qla2xxx, aacraid, megaraid_sas,
  hisi_sas.

  We also have a rework of the libsas hotplug handling to make it more
  robust, a slew of 32 bit time conversions and fixes, and a host of the
  usual minor updates and style changes. The biggest potential for
  regressions is the libsas hotplug changes, but so far they seem stable
  under testing"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (313 commits)
  scsi: qla2xxx: Fix logo flag for qlt_free_session_done()
  scsi: arcmsr: avoid do_gettimeofday
  scsi: core: Add VENDOR_SPECIFIC sense code definitions
  scsi: qedi: Drop cqe response during connection recovery
  scsi: fas216: fix sense buffer initialization
  scsi: ibmvfc: Remove unneeded semicolons
  scsi: hisi_sas: fix a bug in hisi_sas_dev_gone()
  scsi: hisi_sas: directly attached disk LED feature for v2 hw
  scsi: hisi_sas: devicetree: bindings: add LED feature for v2 hw
  scsi: megaraid_sas: NVMe passthrough command support
  scsi: megaraid: use ktime_get_real for firmware time
  scsi: fnic: use 64-bit timestamps
  scsi: qedf: Fix error return code in __qedf_probe()
  scsi: devinfo: fix format of the device list
  scsi: qla2xxx: Update driver version to 10.00.00.05-k
  scsi: qla2xxx: Add XCB counters to debugfs
  scsi: qla2xxx: Fix queue ID for async abort with Multiqueue
  scsi: qla2xxx: Fix warning for code intentation in __qla24xx_handle_gpdb_event()
  scsi: qla2xxx: Fix warning during port_name debug print
  scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout()
  ...

Merge tag 'for-4.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - DM core fixes to ensure that bio submission follows a depth-first
   tree walk; this is critical to allow forward progress without the
   need to use the bioset's BIOSET_NEED_RESCUER.

 - Remove DM core's BIOSET_NEED_RESCUER based dm_offload infrastructure.

 - DM core cleanups and improvements to make bio-based DM more efficient
   (e.g. reduced memory footprint as well leveraging per-bio-data more).

 - Introduce new bio-based mode (DM_TYPE_NVME_BIO_BASED) that leverages
   the more direct IO submission path in the block layer; this mode is
   used by DM multipath and also optimizes targets like DM thin-pool
   that stack directly on NVMe data device.

 - DM multipath improvements to factor out legacy SCSI-only (e.g.
   scsi_dh) code paths to allow for more optimized support for NVMe
   multipath.

 - A fix for DM multipath path selectors (service-time and queue-length)
   to select paths in a more balanced way; largely academic but doesn't
   hurt.

 - Numerous DM raid target fixes and improvements.

 - Add a new DM "unstriped" target that enables Intel to workaround
   firmware limitations in some NVMe drives that are striped internally
   (this target also works when stacked above the DM "striped" target).

 - Various Documentation fixes and improvements.

 - Misc cleanups and fixes across various DM infrastructure and targets
   (e.g. bufio, flakey, log-writes, snapshot).

* tag 'for-4.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (69 commits)
  dm cache: Documentation: update default migration_throttling value
  dm mpath selector: more evenly distribute ties
  dm unstripe: fix target length versus number of stripes size check
  dm thin: fix trailing semicolon in __remap_and_issue_shared_cell
  dm table: fix NVMe bio-based dm_table_determine_type() validation
  dm: various cleanups to md->queue initialization code
  dm mpath: delay the retry of a request if the target responded as busy
  dm mpath: return DM_MAPIO_DELAY_REQUEUE if QUEUE_IO or PG_INIT_REQUIRED
  dm mpath: return DM_MAPIO_REQUEUE on blk-mq rq allocation failure
  dm log writes: fix max length used for kstrndup
  dm: backfill missing calls to mutex_destroy()
  dm snapshot: use mutex instead of rw_semaphore
  dm flakey: check for null arg_name in parse_features()
  dm thin: extend thinpool status format string with omitted fields
  dm thin: fixes in thin-provisioning.txt
  dm thin: document representation of <highest mapped sector> when there is none
  dm thin: fix documentation relative to low water mark threshold
  dm cache: be consistent in specifying sectors and SI units in cache.txt
  dm cache: delete obsoleted paragraph in cache.txt
  dm cache: fix grammar in cache-policies.txt
  ...

Pull MD updates from Shaohua Li:
 "Some small fixes for MD:

   - fix raid5-cache potential problems if raid5 cache isn't fully
     recovered

   - fix a wait-within-wait warning in raid1/10

   - make raid5-PPL support disks with writeback cache enabled"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  raid5-ppl: PPL support for disks with write-back cache enabled
  md/r5cache: print more info of log recovery
  md/raid1,raid10: silence warning about wait-within-wait
  md: introduce new personality funciton start()