Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 21 9月, 2022 2 次提交
    • V
      net: enetc: deny offload of tc-based TSN features on VF interfaces · 5641c751
      由 Vladimir Oltean 提交于 
      TSN features on the ENETC (taprio, cbs, gate, police) are configured
through a mix of command BD ring messages and port registers:
enetc_port_rd(), enetc_port_wr().

Port registers are a region of the ENETC memory map which are only
accessible from the PCIe Physical Function. They are not accessible from
the Virtual Functions.

Moreover, attempting to access these registers crashes the kernel:

$ echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/sriov_numvfs
pci 0000:00:01.0: [1957:ef00] type 00 class 0x020001
fsl_enetc_vf 0000:00:01.0: Adding to iommu group 15
fsl_enetc_vf 0000:00:01.0: enabling device (0000 -> 0002)
fsl_enetc_vf 0000:00:01.0 eno0vf0: renamed from eth0
$ tc qdisc replace dev eno0vf0 root taprio num_tc 8 map 0 1 2 3 4 5 6 7 \
	queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \
	sched-entry S 0x7f 900000 sched-entry S 0x80 100000 flags 0x2
Unable to handle kernel paging request at virtual address ffff800009551a08
Internal error: Oops: 96000007 [#1] PREEMPT SMP
pc : enetc_setup_tc_taprio+0x170/0x47c
lr : enetc_setup_tc_taprio+0x16c/0x47c
Call trace:
 enetc_setup_tc_taprio+0x170/0x47c
 enetc_setup_tc+0x38/0x2dc
 taprio_change+0x43c/0x970
 taprio_init+0x188/0x1e0
 qdisc_create+0x114/0x470
 tc_modify_qdisc+0x1fc/0x6c0
 rtnetlink_rcv_msg+0x12c/0x390

Split enetc_setup_tc() into separate functions for the PF and for the
VF drivers. Also remove enetc_qos.o from being included into
enetc-vf.ko, since it serves absolutely no purpose there.

Fixes: 34c6adf1 ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload")
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220916133209.3351399-2-vladimir.oltean@nxp.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
      5641c751
    • V
      net: enetc: move enetc_set_psfp() out of the common enetc_set_features() · fed38e64
      由 Vladimir Oltean 提交于 
      The VF netdev driver shouldn't respond to changes in the NETIF_F_HW_TC
flag; only PFs should. Moreover, TSN-specific code should go to
enetc_qos.c, which should not be included in the VF driver.

Fixes: 79e49982 ("net: enetc: add hw tc hw offload features for PSPF capability")
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220916133209.3351399-1-vladimir.oltean@nxp.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
      fed38e64
  3. 12 5月, 2022 2 次提交
    • V
      net: enetc: kill PHY-less mode for PFs · 0f84d403
      由 Vladimir Oltean 提交于 
      Right now, a PHY-less port (no phy-mode, no fixed-link, no phy-handle)
doesn't register with phylink, but calls netif_carrier_on() from
enetc_start().

This makes sense for a VF, but for a PF, this is braindead, because we
never call enetc_mac_enable() so the MAC is left inoperational.
Furthermore, commit 71b77a7a ("enetc: Migrate to PHYLINK and
PCS_LYNX") put the nail in the coffin because it removed the initial
netif_carrier_off() call done right after register_netdev().

Without that call, netif_carrier_on() does not call
linkwatch_fire_event(), so the operstate remains IF_OPER_UNKNOWN.

Just deny the broken configuration by requiring that a phy-mode is
present, and always register a PF with phylink.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NClaudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220511094200.558502-1-vladimir.oltean@nxp.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
      0f84d403
    • V
      net: enetc: manage ENETC_F_QBV in priv->active_offloads only when enabled · 32bf8e1f
      由 Vladimir Oltean 提交于 
      Future work in this driver would like to look at priv->active_offloads &
ENETC_F_QBV to determine whether a tc-taprio qdisc offload was
installed, but this does not produce the intended effect.

All the other flags in priv->active_offloads are managed dynamically,
except ENETC_F_QBV which is set statically based on the probed SI capability.

This change makes priv->active_offloads & ENETC_F_QBV really track the
presence of a tc-taprio schedule on the port.

Some existing users, like the enetc_sched_speed_set() call from
phylink_mac_link_up(), are best kept using the old logic: the tc-taprio
offload does not re-trigger another link mode resolve, so the scheduler
needs to be functional from the get go, as long as Qbv is supported at
all on the port. So to preserve functionality there, look at the static
station interface capability from pf->si->hw_features instead.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NClaudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      32bf8e1f
  5. 27 1月, 2022 1 次提交
  7. 03 1月, 2022 2 次提交
  9. 17 11月, 2021 3 次提交
  11. 24 10月, 2021 1 次提交
    • S
      net: convert users of bitmap_foo() to linkmode_foo() · 4973056c
      由 Sean Anderson 提交于 
      This converts instances of
	bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS)
to
	linkmode_foo(args...)

I manually fixed up some lines to prevent them from being excessively
long. Otherwise, this change was generated with the following semantic
patch:

// Generated with
// echo linux/linkmode.h > includes
// git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \
// | sort | uniq | tee new_includes | wc -l && mv new_includes includes
// and repeating until the number stopped going up
@i@
@@

(
 #include <linux/acpi_mdio.h>
|
 #include <linux/brcmphy.h>
|
 #include <linux/dsa/loop.h>
|
 #include <linux/dsa/sja1105.h>
|
 #include <linux/ethtool.h>
|
 #include <linux/ethtool_netlink.h>
|
 #include <linux/fec.h>
|
 #include <linux/fs_enet_pd.h>
|
 #include <linux/fsl/enetc_mdio.h>
|
 #include <linux/fwnode_mdio.h>
|
 #include <linux/linkmode.h>
|
 #include <linux/lsm_audit.h>
|
 #include <linux/mdio-bitbang.h>
|
 #include <linux/mdio.h>
|
 #include <linux/mdio-mux.h>
|
 #include <linux/mii.h>
|
 #include <linux/mii_timestamper.h>
|
 #include <linux/mlx5/accel.h>
|
 #include <linux/mlx5/cq.h>
|
 #include <linux/mlx5/device.h>
|
 #include <linux/mlx5/driver.h>
|
 #include <linux/mlx5/eswitch.h>
|
 #include <linux/mlx5/fs.h>
|
 #include <linux/mlx5/port.h>
|
 #include <linux/mlx5/qp.h>
|
 #include <linux/mlx5/rsc_dump.h>
|
 #include <linux/mlx5/transobj.h>
|
 #include <linux/mlx5/vport.h>
|
 #include <linux/of_mdio.h>
|
 #include <linux/of_net.h>
|
 #include <linux/pcs-lynx.h>
|
 #include <linux/pcs/pcs-xpcs.h>
|
 #include <linux/phy.h>
|
 #include <linux/phy_led_triggers.h>
|
 #include <linux/phylink.h>
|
 #include <linux/platform_data/bcmgenet.h>
|
 #include <linux/platform_data/xilinx-ll-temac.h>
|
 #include <linux/pxa168_eth.h>
|
 #include <linux/qed/qed_eth_if.h>
|
 #include <linux/qed/qed_fcoe_if.h>
|
 #include <linux/qed/qed_if.h>
|
 #include <linux/qed/qed_iov_if.h>
|
 #include <linux/qed/qed_iscsi_if.h>
|
 #include <linux/qed/qed_ll2_if.h>
|
 #include <linux/qed/qed_nvmetcp_if.h>
|
 #include <linux/qed/qed_rdma_if.h>
|
 #include <linux/sfp.h>
|
 #include <linux/sh_eth.h>
|
 #include <linux/smsc911x.h>
|
 #include <linux/soc/nxp/lpc32xx-misc.h>
|
 #include <linux/stmmac.h>
|
 #include <linux/sunrpc/svc_rdma.h>
|
 #include <linux/sxgbe_platform.h>
|
 #include <net/cfg80211.h>
|
 #include <net/dsa.h>
|
 #include <net/mac80211.h>
|
 #include <net/selftests.h>
|
 #include <rdma/ib_addr.h>
|
 #include <rdma/ib_cache.h>
|
 #include <rdma/ib_cm.h>
|
 #include <rdma/ib_hdrs.h>
|
 #include <rdma/ib_mad.h>
|
 #include <rdma/ib_marshall.h>
|
 #include <rdma/ib_pack.h>
|
 #include <rdma/ib_pma.h>
|
 #include <rdma/ib_sa.h>
|
 #include <rdma/ib_smi.h>
|
 #include <rdma/ib_umem.h>
|
 #include <rdma/ib_umem_odp.h>
|
 #include <rdma/ib_verbs.h>
|
 #include <rdma/iw_cm.h>
|
 #include <rdma/mr_pool.h>
|
 #include <rdma/opa_addr.h>
|
 #include <rdma/opa_port_info.h>
|
 #include <rdma/opa_smi.h>
|
 #include <rdma/opa_vnic.h>
|
 #include <rdma/rdma_cm.h>
|
 #include <rdma/rdma_cm_ib.h>
|
 #include <rdma/rdmavt_cq.h>
|
 #include <rdma/rdma_vt.h>
|
 #include <rdma/rdmavt_qp.h>
|
 #include <rdma/rw.h>
|
 #include <rdma/tid_rdma_defs.h>
|
 #include <rdma/uverbs_ioctl.h>
|
 #include <rdma/uverbs_named_ioctl.h>
|
 #include <rdma/uverbs_std_types.h>
|
 #include <rdma/uverbs_types.h>
|
 #include <soc/mscc/ocelot.h>
|
 #include <soc/mscc/ocelot_ptp.h>
|
 #include <soc/mscc/ocelot_vcap.h>
|
 #include <trace/events/ib_mad.h>
|
 #include <trace/events/rdma_core.h>
|
 #include <trace/events/rdma.h>
|
 #include <trace/events/rpcrdma.h>
|
 #include <uapi/linux/ethtool.h>
|
 #include <uapi/linux/ethtool_netlink.h>
|
 #include <uapi/linux/mdio.h>
|
 #include <uapi/linux/mii.h>
)

@depends on i@
expression list args;
@@

(
- bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_zero(args)
|
- bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_copy(args)
|
- bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_and(args)
|
- bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_or(args)
|
- bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_empty(args)
|
- bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_andnot(args)
|
- bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_equal(args)
|
- bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_intersects(args)
|
- bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_subset(args)
)

Add missing linux/mii.h include to mellanox. -DaveM
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4973056c
  13. 21 10月, 2021 1 次提交
  15. 16 10月, 2021 1 次提交
  17. 08 10月, 2021 2 次提交
  19. 05 10月, 2021 1 次提交
  21. 24 9月, 2021 1 次提交
    • V
      net: enetc: fix the incorrect clearing of IF_MODE bits · 325fd36a
      由 Vladimir Oltean 提交于 
      The enetc phylink .mac_config handler intends to clear the IFMODE field
(bits 1:0) of the PM0_IF_MODE register, but incorrectly clears all the
other fields instead.

For normal operation, the bug was inconsequential, due to the fact that
we write the PM0_IF_MODE register in two stages, first in
phylink .mac_config (which incorrectly cleared out a bunch of stuff),
then we update the speed and duplex to the correct values in
phylink .mac_link_up.

Judging by the code (not tested), it looks like maybe loopback mode was
broken, since this is one of the settings in PM0_IF_MODE which is
incorrectly cleared.

Fixes: c76a9721 ("net: enetc: force the RGMII speed and duplex instead of operating in inband mode")
Reported-by: NPavel Machek (CIP) <pavel@denx.de>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      325fd36a
  23. 16 9月, 2021 1 次提交
  25. 28 7月, 2021 1 次提交
    • A
      dev_ioctl: split out ndo_eth_ioctl · a7605370
      由 Arnd Bergmann 提交于 
      Most users of ndo_do_ioctl are ethernet drivers that implement
the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware
timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP.

Separate these from the few drivers that use ndo_do_ioctl to
implement SIOCBOND, SIOCBR and SIOCWANDEV commands.

This is a purely cosmetic change intended to help readers find
their way through the implementation.

Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NJason Gunthorpe <jgg@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a7605370
  27. 05 6月, 2021 1 次提交
  29. 20 4月, 2021 2 次提交
    • V
      net: enetc: add support for flow control · a8648887
      由 Vladimir Oltean 提交于 
      In the ENETC receive path, a frame received by the MAC is first stored
in a 256KB 'FIFO' memory, then transferred to DRAM when enqueuing it to
the RX ring. The FIFO is a shared resource for all ENETC ports, but
every port keeps track of its own memory utilization, on RX and on TX.

There is a setting for RX rings through which they can either operate in
'lossy' mode (where the lack of a free buffer causes an immediate
discard of the frame) or in 'lossless' mode (where the lack of a free
buffer in the ring makes the frame stay longer in the FIFO).

In turn, when the memory utilization of the FIFO exceeds a certain
margin, the MAC can be configured to emit PAUSE frames.

There is enough FIFO memory to buffer up to 3 MTU-sized frames per RX
port while not jeopardizing the other use cases (jumbo frames), and
also not consume bytes from the port TX allocations. Also, 3 MTU-sized
frames worth of memory is enough to ensure zero loss for 64 byte packets
at 1G line rate.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NClaudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a8648887
    • V
      net: enetc: add a mini driver for the Integrated Endpoint Register Block · e7d48e5f
      由 Vladimir Oltean 提交于 
      The NXP ENETC is a 4-port Ethernet controller which 'smells' to
operating systems like 4 distinct PCIe PFs with SR-IOV, each PF having
its own driver instance, but in fact there are some hardware resources
which are shared between all ports, like for example the 256 KB SRAM
FIFO between the MACs and the Host Transfer Agent which DMAs frames to
DRAM.

To hide the stuff that cannot be neatly exposed per port, the hardware
designers came up with this idea of having a dedicated register block
which is supposed to be populated by the bootloader, and contains
everything configuration-related: MAC addresses, FIFO partitioning, etc.

When a port is reset using PCIe Function Level Reset, its defaults are
transferred from the IERB configuration. Most of the time, the settings
made through the IERB are read-only in the port's memory space (if they
are even visible), so they cannot be modified at runtime.

Linux doesn't have any advanced FIFO partitioning requirements at all,
but when reading through the hardware manual, it became clear that, even
though there are many good 'recommendations' for default values, many of
them were not actually put in practice on LS1028A. So we end up with a
default configuration that:

(a) does not have enough TX and RX byte credits to support the max MTU
    of 9600 (which the Linux driver claims already) properly (at full speed)
(b) allows the FIFO to be overrun with RX traffic, potentially
    overwriting internal data structures.

The last part sounds a bit catastrophic, but it isn't. Frames are
supposed to transit the FIFO for a very short time, but they can
actually accumulate there under 2 conditions:

(a) there is very severe congestion on DRAM memory, or
(b) the RX rings visible to the operating system were configured for
    lossless operation, and they just ran out of free buffers to copy
    the frame to. This is what is used to put backpressure onto the MAC
    with flow control.

So since ENETC has not supported flow control thus far, RX FIFO overruns
were never seen with Linux. But with the addition of flow control, we
should configure some registers to prevent this from happening. What we
are trying to protect against are bad actors which continue to send us
traffic despite the fact that we have signaled a PAUSE condition. Of
course we can't be lossless in that case, but it is best to configure
the FIFO to do tail dropping rather than letting it overrun.

So in a nutshell, this driver is a fixup for all the IERB default values
that should have been but aren't.

The IERB configuration needs to be done _before_ the PFs are enabled.
So every PF searches for the presence of the "fsl,ls1028a-enetc-ierb"
node in the device tree, and if it finds it, it "registers" with the
IERB, which means that it requests the IERB to fix up its default
values. This is done through -EPROBE_DEFER. The IERB driver is part of
the fsl_enetc module, but is technically a platform driver, since the
IERB is a good old fashioned MMIO region, as opposed to ENETC ports
which pretend to be PCIe devices.

The driver was already configuring ENETC_PTXMBAR (FIFO allocation for
TX) because due to an omission, TXMBAR is a read/write register in the
PF memory space. But the manual is quite clear that the formula for this
should depend upon the TX byte credits (TXBCR). In turn, the TX byte
credits are only readable/writable through the IERB. So if we want to
ensure that the TXBCR register also has a value that is correct and in
line with TXMBAR, there is simply no way this can be done from the PF
driver, access to the IERB is needed.

I could have modified U-Boot to fix up the IERB values, but that is
quite undesirable, as old U-Boot versions are likely to be floating
around for quite some time from now.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e7d48e5f
  31. 15 4月, 2021 1 次提交
    • M
      net: enetc: fetch MAC address from device tree · 652d3be2
      由 Michael Walle 提交于 
      Normally, the bootloader will already initialize the MAC address
registers of the ENETC and the driver will just use them or generate a
random one, if it is not initialized.

Add a new way to provide the MAC address: via device tree. Besides the
usual 'mac-address' property, there is also the possibility to fetch it
via a NVMEM provider. The sl28 board stores the MAC address in the SPI
NOR flash OTP region. Having this will allow linux to fetch the MAC
address from there without being dependent on the bootloader.

No in-tree boards have the device tree properties set, thus for these,
this is a no-op.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      652d3be2
  33. 01 4月, 2021 2 次提交
    • V
      net: enetc: add support for XDP_REDIRECT · 9d2b68cc
      由 Vladimir Oltean 提交于 
      The driver implementation of the XDP_REDIRECT action reuses parts from
XDP_TX, most notably the enetc_xdp_tx function which transmits an array
of TX software BDs. Only this time, the buffers don't have DMA mappings,
we need to create them.

When a BPF program reaches the XDP_REDIRECT verdict for a frame, we can
employ the same buffer reuse strategy as for the normal processing path
and for XDP_PASS: we can flip to the other page half and seed that to
the RX ring.

Note that scatter/gather support is there, but disabled due to lack of
multi-buffer support in XDP (which is added by this series):
https://patchwork.kernel.org/project/netdevbpf/cover/cover.1616179034.git.lorenzo@kernel.org/Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9d2b68cc
    • V
      net: enetc: add support for XDP_DROP and XDP_PASS · d1b15102
      由 Vladimir Oltean 提交于 
      For the RX ring, enetc uses an allocation scheme based on pages split
into two buffers, which is already very efficient in terms of preventing
reallocations / maximizing reuse, so I see no reason why I would change
that.

 +--------+--------+--------+--------+--------+--------+--------+
 |        |        |        |        |        |        |        |
 | half B | half B | half B | half B | half B | half B | half B |
 |        |        |        |        |        |        |        |
 +--------+--------+--------+--------+--------+--------+--------+
 |        |        |        |        |        |        |        |
 | half A | half A | half A | half A | half A | half A | half A | RX ring
 |        |        |        |        |        |        |        |
 +--------+--------+--------+--------+--------+--------+--------+
     ^                                                     ^
     |                                                     |
 next_to_clean                                       next_to_alloc
                                                      next_to_use

                   +--------+--------+--------+--------+--------+
                   |        |        |        |        |        |
                   | half B | half B | half B | half B | half B |
                   |        |        |        |        |        |
 +--------+--------+--------+--------+--------+--------+--------+
 |        |        |        |        |        |        |        |
 | half B | half B | half A | half A | half A | half A | half A | RX ring
 |        |        |        |        |        |        |        |
 +--------+--------+--------+--------+--------+--------+--------+
 |        |        |   ^                                   ^
 | half A | half A |   |                                   |
 |        |        | next_to_clean                   next_to_use
 +--------+--------+
              ^
              |
         next_to_alloc

then when enetc_refill_rx_ring is called, whose purpose is to advance
next_to_use, it sees that it can take buffers up to next_to_alloc, and
it says "oh, hey, rx_swbd->page isn't NULL, I don't need to allocate
one!".

The only problem is that for default PAGE_SIZE values of 4096, buffer
sizes are 2048 bytes. While this is enough for normal skb allocations at
an MTU of 1500 bytes, for XDP it isn't, because the XDP headroom is 256
bytes, and including skb_shared_info and alignment, we end up being able
to make use of only 1472 bytes, which is insufficient for the default
MTU.

To solve that problem, we implement scatter/gather processing in the
driver, because we would really like to keep the existing allocation
scheme. A packet of 1500 bytes is received in a buffer of 1472 bytes and
another one of 28 bytes.

Because the headroom required by XDP is different (and much larger) than
the one required by the network stack, whenever a BPF program is added
or deleted on the port, we drain the existing RX buffers and seed new
ones with the required headroom. We also keep the required headroom in
rx_ring->buffer_offset.

The simplest way to implement XDP_PASS, where an skb must be created, is
to create an xdp_buff based on the next_to_clean RX BDs, but not clear
those BDs from the RX ring yet, just keep the original index at which
the BDs for this frame started. Then, if the verdict is XDP_PASS,
instead of converting the xdb_buff to an skb, we replay a call to
enetc_build_skb (just as in the normal enetc_clean_rx_ring case),
starting from the original BD index.

We would also like to be minimally invasive to the regular RX data path,
and not check whether there is a BPF program attached to the ring on
every packet. So we create a separate RX ring processing function for
XDP.

Because we only install/remove the BPF program while the interface is
down, we forgo the rcu_read_lock() in enetc_clean_rx_ring, since there
shouldn't be any circumstance in which we are processing packets and
there is a potentially freed BPF program attached to the RX ring.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d1b15102
  35. 25 3月, 2021 2 次提交
    • V
      net: enetc: don't depend on system endianness in enetc_set_mac_ht_flt · e366a392
      由 Vladimir Oltean 提交于 
      When enetc runs out of exact match entries for unicast address
filtering, it switches to an approach based on hash tables, where
multiple MAC addresses might end up in the same bucket.

However, the enetc_set_mac_ht_flt function currently depends on the
system endianness, because it interprets the 64-bit hash value as an
array of two u32 elements. Modify this to use lower_32_bits and
upper_32_bits.

Tested by forcing enetc to go into hash table mode by creating two
macvlan upper interfaces:

ip link add link eno0 address 00:01:02:03:00:00 eno0.0 type macvlan && ip link set eno0.0 up
ip link add link eno0 address 00:01:02:03:00:01 eno0.1 type macvlan && ip link set eno0.1 up

and verified that the same bit values are written to the registers
before and after:

enetc_sync_mac_filters: addr 00:00:80:00:40:10 exact match 0
enetc_sync_mac_filters: addr 00:00:00:00:80:00 exact match 0
enetc_set_mac_ht_flt: hash 0x80008000000000 UMHFR0 0x0 UMHFR1 0x800080
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NClaudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e366a392
    • V
      net: enetc: don't depend on system endianness in enetc_set_vlan_ht_filter · 110eccdb
      由 Vladimir Oltean 提交于 
      ENETC has a 64-entry hash table for VLAN RX filtering per Station
Interface, which is accessed through two 32-bit registers: VHFR0 holding
the low portion, and VHFR1 holding the high portion.

The enetc_set_vlan_ht_filter function looks at the pf->vlan_ht_filter
bitmap, which is fundamentally an unsigned long variable, and casts it
to a u32 array of two elements. It puts the first u32 element into VHFR0
and the second u32 element into VHFR1.

It is easy to imagine that this will not work on big endian systems
(although, yes, we have bigger problems, because currently enetc assumes
that the CPU endianness is equal to the controller endianness, aka
little endian - but let's assume that we could add a cpu_to_le32 in
enetc_wd_reg and a le32_to_cpu in enetc_rd_reg).

Let's use lower_32_bits and upper_32_bits which are designed to work
regardless of endianness.

Tested that both the old and the new method produce the same results:

$ ethtool -K eth1 rx-vlan-filter on
$ ip link add link eth1 name eth1.100 type vlan id 100
enetc_set_vlan_ht_filter: method 1: si_idx 0 VHFR0 0x0 VHFR1 0x20
enetc_set_vlan_ht_filter: method 2: si_idx 0 VHFR0 0x0 VHFR1 0x20
$ ip link add link eth1 name eth1.101 type vlan id 101
enetc_set_vlan_ht_filter: method 1: si_idx 0 VHFR0 0x0 VHFR1 0x30
enetc_set_vlan_ht_filter: method 2: si_idx 0 VHFR0 0x0 VHFR1 0x30
$ ip link add link eth1 name eth1.34 type vlan id 34
enetc_set_vlan_ht_filter: method 1: si_idx 0 VHFR0 0x0 VHFR1 0x34
enetc_set_vlan_ht_filter: method 2: si_idx 0 VHFR0 0x0 VHFR1 0x34
$ ip link add link eth1 name eth1.1024 type vlan id 1024
enetc_set_vlan_ht_filter: method 1: si_idx 0 VHFR0 0x1 VHFR1 0x34
enetc_set_vlan_ht_filter: method 2: si_idx 0 VHFR0 0x1 VHFR1 0x34
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NClaudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      110eccdb
  37. 20 3月, 2021 1 次提交
    • V
      net: enetc: teardown CBDR during PF/VF unbind · c54f042d
      由 Vladimir Oltean 提交于 
      Michael reports that after the blamed patch, unbinding a VF would cause
these transactions to remain pending, and trigger some warnings with the
DMA API debug:

$ echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/sriov_numvfs
pci 0000:00:01.0: [1957:ef00] type 00 class 0x020001
fsl_enetc_vf 0000:00:01.0: Adding to iommu group 19
fsl_enetc_vf 0000:00:01.0: enabling device (0000 -> 0002)
fsl_enetc_vf 0000:00:01.0 eno0vf0: renamed from eth0

$ echo 0 > /sys/bus/pci/devices/0000\:00\:00.0/sriov_numvfs
DMA-API: pci 0000:00:01.0: device driver has pending DMA allocations while released from device [count=1]
One of leaked entries details: [size=2048 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent]
WARNING: CPU: 0 PID: 2547 at kernel/dma/debug.c:853 dma_debug_device_change+0x174/0x1c8
(...)
Call trace:
 dma_debug_device_change+0x174/0x1c8
 blocking_notifier_call_chain+0x74/0xa8
 device_release_driver_internal+0x18c/0x1f0
 device_release_driver+0x20/0x30
 pci_stop_bus_device+0x8c/0xe8
 pci_stop_and_remove_bus_device+0x20/0x38
 pci_iov_remove_virtfn+0xb8/0x128
 sriov_disable+0x3c/0x110
 pci_disable_sriov+0x24/0x30
 enetc_sriov_configure+0x4c/0x108
 sriov_numvfs_store+0x11c/0x198
(...)
DMA-API: Mapped at:
 dma_entry_alloc+0xa4/0x130
 debug_dma_alloc_coherent+0xbc/0x138
 dma_alloc_attrs+0xa4/0x108
 enetc_setup_cbdr+0x4c/0x1d0
 enetc_vf_probe+0x11c/0x250
pci 0000:00:01.0: Removing from iommu group 19

This happens because stupid me moved enetc_teardown_cbdr outside of
enetc_free_si_resources, but did not bother to keep calling
enetc_teardown_cbdr from all the places where enetc_free_si_resources
was called. In particular, now it is no longer called from the main
unbind function, just from the probe error path.

Fixes: 4b47c0b8 ("net: enetc: don't initialize unused ports from a separate code path")
Reported-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c54f042d
  39. 11 3月, 2021 6 次提交
  41. 09 3月, 2021 1 次提交
  43. 02 3月, 2021 4 次提交
    • V
      net: enetc: force the RGMII speed and duplex instead of operating in inband mode · c76a9721
      由 Vladimir Oltean 提交于 
      The ENETC port 0 MAC supports in-band status signaling coming from a PHY
when operating in RGMII mode, and this feature is enabled by default.

It has been reported that RGMII is broken in fixed-link, and that is not
surprising considering the fact that no PHY is attached to the MAC in
that case, but a switch.

This brings us to the topic of the patch: the enetc driver should have
not enabled the optional in-band status signaling for RGMII unconditionally,
but should have forced the speed and duplex to what was resolved by
phylink.

Note that phylink does not accept the RGMII modes as valid for in-band
signaling, and these operate a bit differently than 1000base-x and SGMII
(notably there is no clause 37 state machine so no ACK required from the
MAC, instead the PHY sends extra code words on RXD[3:0] whenever it is
not transmitting something else, so it should be safe to leave a PHY
with this option unconditionally enabled even if we ignore it). The spec
talks about this here:
https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/138/RGMIIv1_5F00_3.pdf

Fixes: 71b77a7a ("enetc: Migrate to PHYLINK and PCS_LYNX")
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c76a9721
    • V
      net: enetc: don't disable VLAN filtering in IFF_PROMISC mode · a74dbce9
      由 Vladimir Oltean 提交于 
      Quoting from the blamed commit:

    In promiscuous mode, it is more intuitive that all traffic is received,
    including VLAN tagged traffic. It appears that it is necessary to set
    the flag in PSIPVMR for that to be the case, so VLAN promiscuous mode is
    also temporarily enabled. On exit from promiscuous mode, the setting
    made by ethtool is restored.

Intuitive or not, there isn't any definition issued by a standards body
which says that promiscuity has anything to do with VLAN filtering - it
only has to do with accepting packets regardless of destination MAC address.

In fact people are already trying to use this misunderstanding/bug of
the enetc driver as a justification to transform promiscuity into
something it never was about: accepting every packet (maybe that would
be the "rx-all" netdev feature?):
https://lore.kernel.org/netdev/20201110153958.ci5ekor3o2ekg3ky@ipetronik.com/

This is relevant because there are use cases in the kernel (such as
tc-flower rules with the protocol 802.1Q and a vlan_id key) which do not
(yet) use the vlan_vid_add API to be compatible with VLAN-filtering NICs
such as enetc, so for those, disabling rx-vlan-filter is currently the
only right solution to make these setups work:
https://lore.kernel.org/netdev/CA+h21hoxwRdhq4y+w8Kwgm74d4cA0xLeiHTrmT-VpSaM7obhkg@mail.gmail.com/
The blamed patch has unintentionally introduced one more way for this to
work, which is to enable IFF_PROMISC, however this is non-portable
because port promiscuity is not meant to disable VLAN filtering.
Therefore, it could invite people to write broken scripts for enetc, and
then wonder why they are broken when migrating to other drivers that
don't handle promiscuity in the same way.

Fixes: 7070eea5 ("enetc: permit configuration of rx-vlan-filter with ethtool")
Cc: Markus Blöchl <Markus.Bloechl@ipetronik.com>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a74dbce9
    • V
      net: enetc: initialize RFS/RSS memories for unused ports too · 3222b5b6
      由 Vladimir Oltean 提交于 
      Michael reports that since linux-next-20210211, the AER messages for ECC
errors have started reappearing, and this time they can be reliably
reproduced with the first ping on one of his LS1028A boards.

$ ping 1[   33.258069] pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0
72.16.0.1
PING [   33.267050] pcieport 0000:00:1f.0: AER: can't find device of ID0000
172.16.0.1 (172.16.0.1): 56 data bytes
64 bytes from 172.16.0.1: seq=0 ttl=64 time=17.124 ms
64 bytes from 172.16.0.1: seq=1 ttl=64 time=0.273 ms

$ devmem 0x1f8010e10 32
0xC0000006

It isn't clear why this is necessary, but it seems that for the errors
to go away, we must clear the entire RFS and RSS memory, not just for
the ports in use.

Sadly the code is structured in such a way that we can't have unified
logic for the used and unused ports. For the minimal initialization of
an unused port, we need just to enable and ioremap the PF memory space,
and a control buffer descriptor ring. Unused ports must then free the
CBDR because the driver will exit, but used ports can not pick up from
where that code path left, since the CBDR API does not reinitialize a
ring when setting it up, so its producer and consumer indices are out of
sync between the software and hardware state. So a separate
enetc_init_unused_port function was created, and it gets called right
after the PF memory space is enabled.

Fixes: 07bf34a5 ("net: enetc: initialize the RFS and RSS memories")
Reported-by: NMichael Walle <michael@walle.cc>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3222b5b6
    • V
      net: enetc: don't overwrite the RSS indirection table when initializing · c646d10d
      由 Vladimir Oltean 提交于 
      After the blamed patch, all RX traffic gets hashed to CPU 0 because the
hashing indirection table set up in:

enetc_pf_probe
-> enetc_alloc_si_resources
   -> enetc_configure_si
      -> enetc_setup_default_rss_table

is overwritten later in:

enetc_pf_probe
-> enetc_init_port_rss_memory

which zero-initializes the entire port RSS table in order to avoid ECC errors.

The trouble really is that enetc_init_port_rss_memory really neads
enetc_alloc_si_resources to be called, because it depends upon
enetc_alloc_cbdr and enetc_setup_cbdr. But that whole enetc_configure_si
thing could have been better thought out, it has nothing to do in a
function called "alloc_si_resources", especially since its counterpart,
"free_si_resources", does nothing to unwind the configuration of the SI.

The point is, we need to pull out enetc_configure_si out of
enetc_alloc_resources, and move it after enetc_init_port_rss_memory.
This allows us to set up the default RSS indirection table after
initializing the memory.

Fixes: 07bf34a5 ("net: enetc: initialize the RFS and RSS memories")
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c646d10d
  45. 17 2月, 2021 1 次提交
    • V
      net: enetc: fix destroyed phylink dereference during unbind · 3af409ca
      由 Vladimir Oltean 提交于 
      The following call path suggests that calling unregister_netdev on an
interface that is up will first bring it down.

enetc_pf_remove
-> unregister_netdev
   -> unregister_netdevice_queue
      -> unregister_netdevice_many
         -> dev_close_many
            -> __dev_close_many
               -> enetc_close
                  -> enetc_stop
                     -> phylink_stop

However, enetc first destroys the phylink instance, then calls
unregister_netdev. This is already dissimilar to the setup (and error
path teardown path) from enetc_pf_probe, but more than that, it is buggy
because it is invalid to call phylink_stop after phylink_destroy.

So let's first unregister the netdev (and let the .ndo_stop events
consume themselves), then destroy the phylink instance, then free the
netdev.

Fixes: 71b77a7a ("enetc: Migrate to PHYLINK and PCS_LYNX")
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3af409ca