1. 03 7月, 2007 1 次提交
  2. 30 5月, 2007 1 次提交
    • L
      ACPICA: allow Load(OEMx) tables · 0efabac9
      Len Brown 提交于
      HP and Hitachi machines have been implemented with SSDT's
      that use the "OEMx" signatures.  But upon Load, ACPICA is rejecting
      these tables because they are not using the "SSDT" signature.
      
      ACPI Error (tbinstal-0134): Table has invalid signature [OEMx], must be SSDT...
      Signed-off-by: NLen Brown <len.brown@intel.com>
      0efabac9
  3. 10 5月, 2007 1 次提交
  4. 29 4月, 2007 1 次提交
  5. 17 2月, 2007 1 次提交
  6. 16 2月, 2007 1 次提交
  7. 07 2月, 2007 1 次提交
  8. 03 2月, 2007 18 次提交
  9. 20 12月, 2006 1 次提交
    • J
      ACPI: Add support for acpi_load_table/acpi_unload_table_id · 0f0fe1a0
      John Keller 提交于
      Make acpi_load_table() available for use by removing it from the #ifdef
      ACPI_FUTURE_USAGE.
      
      Also add a new routine used to unload an ACPI table of a given type and "id" -
      acpi_unload_table_id().  The implementation of this new routine was almost a
      direct copy of existing routine acpi_unload_table() - only difference being
      that it only removes a specific table id instead of ALL tables of a given
      type.  The SN hotplug driver (sgi_hotplug.c) now uses both of these interfaces
      to dynamically load and unload SSDT ACPI tables.
      
      Also, a few other ACPI routines now used by the SN hotplug driver are exported
      (since the driver can be a loadable module):
      
       acpi_ns_map_handle_to_node
       acpi_ns_convert_entry_to_handle
       acpi_ns_get_next_node
      Signed-off-by: NAaron Young <ayoung@sgi.com>
      Cc: Greg KH <greg@kroah.com>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      0f0fe1a0
  10. 14 10月, 2006 1 次提交
  11. 10 7月, 2006 1 次提交
    • B
      ACPI: ACPICA 20060707 · f6dd9221
      Bob Moore 提交于
      Added the ACPI_PACKED_POINTERS_NOT_SUPPORTED macro to
      support C compilers that do not allow the initialization
      of address pointers within packed structures - even though
      the hardware itself may support misaligned transfers. Some
      of the debug data structures are packed by default to
      minimize size.
      
      Added an error message for the case where
      acpi_os_get_thread_id() returns zero. A non-zero value is
      required by the core ACPICA code to ensure the proper
      operation of AML mutexes and recursive control methods.
      
      The DSDT is now the only ACPI table that determines whether
      the AML interpreter is in 32-bit or 64-bit mode. Not really
      a functional change, but the hooks for per-table 32/64
      switching have been removed from the code. A clarification
      to the ACPI specification is forthcoming in ACPI 3.0B.
      
      Fixed a possible leak of an Owner ID in the error
      path of tbinstal.c acpi_tb_init_table_descriptor() and
      migrated all table OwnerID deletion to a single place in
      acpi_tb_uninstall_table() to correct possible leaks when using
      the acpi_tb_delete_tables_by_type() interface (with assistance
      from Lance Ortiz.)
      
      Fixed a problem with Serialized control methods where the
      semaphore associated with the method could be over-signaled
      after multiple method invocations.
      
      Fixed two issues with the locking of the internal
      namespace data structure. Both the Unload() operator and
      acpi_unload_table() interface now lock the namespace during
      the namespace deletion associated with the table unload
      (with assistance from Linn Crosetto.)
      
      Fixed problem reports (Valery Podrezov) integrated: -
      Eliminate unnecessary memory allocation for CreateXxxxField
      http://bugzilla.kernel.org/show_bug.cgi?id=5426
      
      Fixed problem reports (Fiodor Suietov) integrated: -
      Incomplete cleanup branches in AcpiTbGetTableRsdt (BZ 369)
      - On Address Space handler deletion, needless deactivation
      call (BZ 374) - AcpiRemoveAddressSpaceHandler: validate
      Device handle parameter (BZ 375) - Possible memory leak,
      Notify sub-objects of Processor, Power, ThermalZone (BZ
      376) - AcpiRemoveAddressSpaceHandler: validate Handler
      parameter (BZ 378) - Minimum Length of RSDT should be
      validated (BZ 379) - AcpiRemoveNotifyHandler: return
      AE_NOT_EXIST if Processor Obj has no Handler (BZ (380)
      - AcpiUnloadTable: return AE_NOT_EXIST if no table of
      specified type loaded (BZ 381)
      Signed-off-by: NBob Moore <robert.moore@intel.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      f6dd9221
  12. 14 6月, 2006 5 次提交
    • B
      ACPI: ACPICA 20060608 · 4c90ece2
      Bob Moore 提交于
      Converted the locking mutex used for the ACPI hardware
      to a spinlock. This change should eliminate all problems
      caused by attempting to acquire a semaphore at interrupt
      level, and it means that all ACPICA external interfaces
      that directly access the ACPI hardware can be safely
      called from interrupt level.
      
      Fixed a regression introduced in 20060526 where the ACPI
      device initialization could be prematurely aborted with
      an AE_NOT_FOUND if a device did not have an optional
      _INI method.
      
      Fixed an IndexField issue where a write to the Data
      Register should be limited in size to the AccessSize
      (width) of the IndexField itself. (BZ 433, Fiodor Suietov)
      
      Fixed problem reports (Valery Podrezov) integrated: - Allow
      store of ThermalZone objects to Debug object.
      http://bugzilla.kernel.org/show_bug.cgi?id=5369
      http://bugzilla.kernel.org/show_bug.cgi?id=5370
      
      Fixed problem reports (Fiodor Suietov) integrated: -
      acpi_get_table_header() doesn't handle multiple instances
      correctly (BZ 364)
      
      Removed four global mutexes that were obsolete and were
      no longer being used.
      Signed-off-by: NBob Moore <robert.moore@intel.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      4c90ece2
    • B
      ACPI: ACPICA 20060526 · 4119532c
      Bob Moore 提交于
      Restructured, flattened, and simplified the internal
      interfaces for namespace object evaluation - resulting
      in smaller code, less CPU stack use, and fewer
      interfaces. (With assistance from Mikhail Kouzmich)
      
      Fixed a problem with the CopyObject operator where the
      first parameter was not typed correctly for the parser,
      interpreter, compiler, and disassembler. Caused various
      errors and unexpected behavior.
      
      Fixed a problem where a ShiftLeft or ShiftRight of
      more than 64 bits produced incorrect results with some
      C compilers. Since the behavior of C compilers when
      the shift value is larger than the datatype width is
      apparently not well defined, the interpreter now detects
      this condition and simply returns zero as expected in all
      such cases. (BZ 395)
      
      Fixed problem reports (Valery Podrezov) integrated: -
      Update String-to-Integer conversion to match ACPI 3.0A spec
      http://bugzilla.kernel.org/show_bug.cgi?id=5329
      Allow interpreter to handle nested method declarations
      http://bugzilla.kernel.org/show_bug.cgi?id=5361
      
      Fixed problem reports (Fiodor Suietov) integrated: -
      acpi_terminate() doesn't free debug memory allocation
      list objects (BZ 355) - After Core Subsystem
      shutdown, acpi_subsystem_status() returns AE_OK (BZ 356) -
      acpi_os_unmap_memory() for RSDP can be invoked inconsistently
      (BZ 357) - Resource Manager should return AE_TYPE for
      non-device objects (BZ 358) - Incomplete cleanup branch
      in AcpiNsEvaluateRelative (BZ 359) - Use acpi_os_free()
      instead of ACPI_FREE in acpi_rs_set_srs_method_data (BZ 360)
      - Incomplete cleanup branch in acpi_ps_parse_aml (BZ 361) -
      Incomplete cleanup branch in acpi_ds_delete_walk_state (BZ 362)
      - acpi_get_table_header returns AE_NO_ACPI_TABLES until DSDT
      is loaded (BZ 365) - Status of the Global Initialization
      Handler call not used (BZ 366) - Incorrect object parameter
      to Global Initialization Handler (BZ 367)
      Signed-off-by: NBob Moore <robert.moore@intel.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      4119532c
    • B
      ACPI: ACPICA 20060512 · 958dd242
      Bob Moore 提交于
      Replaced the acpi_os_queue_for_execution() with a new
      interface named acpi_os_execute(). The major difference is
      that the new interface does not have a Priority parameter,
      this appeared to be useless and has been replaced by
      a Type parameter. The Type tells the OS what type of
      execution is being requested, such as global lock handler,
      notify handler, GPE handler, etc. This allows the host
      to queue and execute the request as appropriate for the
      request type, possibly using different work queues and
      different priorities for the various request types. This
      enables fixes for multithreading deadlock problems such as
      http://bugzilla.kernel.org/show_bug.cgi?id=5534
      (Alexey Starikovskiy and Bob Moore)
      
      Fixed a possible memory leak associated with the
      support for the so-called "implicit return" ACPI
      extension. Reported by FreeBSD  (Fiodor Suietov)
      http://bugzilla.kernel.org/show_bug.cgi?id=6514
      
      Fixed a problem with the Load() operator where a table
      load from an operation region could overwrite an internal
      table buffer by up to 7 bytes and cause alignment faults
      on IPF systems. (With assistance from Luming Yu)
      Signed-off-by: NBob Moore <robert.moore@intel.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      958dd242
    • B
      ACPI: ACPICA 20060421 · b229cf92
      Bob Moore 提交于
      Removed a device initialization optimization introduced in
      20051216 where the _STA method was not run unless an _INI
      was also present for the same device. This optimization
      could cause problems because it could allow _INI methods
      to be run within a not-present device subtree (If a
      not-present device had no _INI, _STA would not be run,
      the not-present status would not be discovered, and the
      children of the device would be incorrectly traversed.)
      
      Implemented a new _STA optimization where namespace
      subtrees that do not contain _INI are identified and
      ignored during device initialization. Selectively running
      _STA can significantly improve boot time on large machines
      (with assistance from Len Brown.)
      
      Implemented support for the device initialization case
      where the returned _STA flags indicate a device not-present
      but functioning. In this case, _INI is not run, but the
      device children are examined for presence, as per the
      ACPI specification.
      
      Implemented an additional change to the IndexField support
      in order to conform to MS behavior. The value written to
      the Index Register is not simply a byte offset, it is a
      byte offset in units of the access width of the parent
      Index Field. (Fiodor Suietov)
      
      Defined and deployed a new OSL interface,
      acpi_os_validate_address().  This interface is called during
      the creation of all AML operation regions, and allows
      the host OS to exert control over what addresses it will
      allow the AML code to access. Operation Regions whose
      addresses are disallowed will cause a runtime exception
      when they are actually accessed (will not affect or abort
      table loading.)
      
      Defined and deployed a new OSL interface,
      acpi_os_validate_interface().  This interface allows the host OS
      to match the various "optional" interface/behavior strings
      for the _OSI predefined control method as appropriate
      (with assistance from Bjorn Helgaas.)
      
      Restructured and corrected various problems in the
      exception handling code paths within DsCallControlMethod
      and DsTerminateControlMethod in dsmethod (with assistance
      from Takayoshi Kochi.)
      
      Modified the Linux source converter to ignore quoted string
      literals while converting identifiers from mixed to lower
      case. This will correct problems with the disassembler
      and other areas where such strings must not be modified.
      
      The ACPI_FUNCTION_* macros no longer require quotes around
      the function name. This allows the Linux source converter
      to convert the names, now that the converter ignores
      quoted strings.
      Signed-off-by: NBob Moore <robert.moore@intel.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      b229cf92
    • B
      ACPI: ACPICA 20060331 · 793c2388
      Bob Moore 提交于
      Implemented header file support for the following
      additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
      SPMI, TCPA, and WDRT. With this support, all current and
      known ACPI tables are now defined in the ACPICA headers and
      are available for use by device drivers and other software.
      
      Implemented support to allow tables that contain ACPI
      names with invalid characters to be loaded. Previously,
      this would cause the table load to fail, but since
      there are several known cases of such tables on
      existing machines, this change was made to enable
      ACPI support for them. Also, this matches the
      behavior of the Microsoft ACPI implementation.
      https://bugzilla.novell.com/show_bug.cgi?id=147621
      
      Fixed a couple regressions introduced during the memory
      optimization in the 20060317 release. The namespace
      node definition required additional reorganization and
      an internal datatype that had been changed to 8-bit was
      restored to 32-bit. (Valery Podrezov)
      
      Fixed a problem where a null pointer passed to
      acpi_ut_delete_generic_state() could be passed through
      to acpi_os_release_object which is unexpected. Such
      null pointers are now trapped and ignored, matching
      the behavior of the previous implementation before the
      deployment of acpi_os_release_object().  (Valery Podrezov,
      Fiodor Suietov)
      
      Fixed a memory mapping leak during the deletion of
      a SystemMemory operation region where a cached memory
      mapping was not deleted. This became a noticeable problem
      for operation regions that are defined within frequently
      used control methods. (Dana Meyers)
      
      Reorganized the ACPI table header files into two main
      files: one for the ACPI tables consumed by the ACPICA core,
      and another for the miscellaneous ACPI tables that are
      consumed by the drivers and other software. The various
      FADT definitions were merged into one common section and
      three different tables (ACPI 1.0, 1.0+, and 2.0)
      Signed-off-by: NBob Moore <robert.moore@intel.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      793c2388
  13. 01 4月, 2006 1 次提交
    • B
      ACPI: ACPICA 20060310 · 8313524a
      Bob Moore 提交于
      Tagged all external interfaces to the subsystem with the
      new ACPI_EXPORT_SYMBOL macro. This macro can be defined
      as necessary to assist kernel integration. For Linux,
      the macro resolves to the EXPORT_SYMBOL macro. The default
      definition is NULL.
      
      Added the ACPI_THREAD_ID type for the return value from
      acpi_os_get_thread_id(). This allows the host to define this
      as necessary to simplify kernel integration. The default
      definition is ACPI_NATIVE_UINT.
      
      Valery Podrezov fixed two interpreter problems related
      to error processing, the deletion of objects, and placing
      invalid pointers onto the internal operator result stack.
      http://bugzilla.kernel.org/show_bug.cgi?id=6028
      http://bugzilla.kernel.org/show_bug.cgi?id=6151
      
      Increased the reference count threshold where a warning is
      emitted for large reference counts in order to eliminate
      unnecessary warnings on systems with large namespaces
      (especially 64-bit.) Increased the value from 0x400
      to 0x800.
      
      Due to universal disagreement as to the meaning of the
      'c' in the calloc() function, the ACPI_MEM_CALLOCATE
      macro has been renamed to ACPI_ALLOCATE_ZEROED so that the
      purpose of the interface is 'clear'. ACPI_MEM_ALLOCATE and
      ACPI_MEM_FREE are renamed to ACPI_ALLOCATE and ACPI_FREE.
      Signed-off-by: NBob Moore <robert.moore@intel.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      8313524a
  14. 31 3月, 2006 1 次提交
  15. 31 1月, 2006 1 次提交
    • B
      [ACPI] ACPICA 20060127 · b8e4d893
      Bob Moore 提交于
      Implemented support in the Resource Manager to allow
      unresolved namestring references within resource package
      objects for the _PRT method. This support is in addition
      to the previously implemented unresolved reference
      support within the AML parser. If the interpreter slack
      mode is enabled (true on Linux unless acpi=strict),
      these unresolved references will be passed through
      to the caller as a NULL package entry.
      http://bugzilla.kernel.org/show_bug.cgi?id=5741
      
      Implemented and deployed new macros and functions for
      error and warning messages across the subsystem. These
      macros are simpler and generate less code than their
      predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION,
      ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_*
      macros.
      
      Implemented the acpi_cpu_flags type to simplify host OS
      integration of the Acquire/Release Lock OSL interfaces.
      Suggested by Steven Rostedt and Andrew Morton.
      
      Fixed a problem where Alias ASL operators are sometimes
      not correctly resolved. causing AE_AML_INTERNAL
      http://bugzilla.kernel.org/show_bug.cgi?id=5189
      http://bugzilla.kernel.org/show_bug.cgi?id=5674
      
      Fixed several problems with the implementation of the
      ConcatenateResTemplate ASL operator. As per the ACPI
      specification, zero length buffers are now treated as a
      single EndTag. One-length buffers always cause a fatal
      exception. Non-zero length buffers that do not end with
      a full 2-byte EndTag cause a fatal exception.
      
      Fixed a possible structure overwrite in the
      AcpiGetObjectInfo external interface. (With assistance
      from Thomas Renninger)
      Signed-off-by: NBob Moore <robert.moore@intel.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      b8e4d893
  16. 20 1月, 2006 1 次提交
    • B
      [ACPI] ACPICA 20060113 · 4a90c7e8
      Bob Moore 提交于
      Added 2006 copyright.
      
      At SuSE's suggestion, enabled all error messages
      without enabling function tracing, ie with CONFIG_ACPI_DEBUG=n
      
      Replaced all instances of the ACPI_DEBUG_PRINT macro invoked at
      the ACPI_DB_ERROR and ACPI_DB_WARN debug levels with
      the ACPI_REPORT_ERROR and ACPI_REPORT_WARNING macros,
      respectively. This preserves all error and warning messages
      in the non-debug version of the ACPICA code (this has been
      referred to as the "debug lite" option.) Over 200 cases
      were converted to create a total of over 380 error/warning
      messages across the ACPICA code. This increases the code
      and data size of the default non-debug version by about 13K.
      Added ACPI_NO_ERROR_MESSAGES flag to enable deleting all messages.
      The size of the debug version remains about the same.
      Signed-off-by: NBob Moore <robert.moore@intel.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      4a90c7e8
  17. 10 12月, 2005 3 次提交
    • B
      [ACPI] ACPICA 20051117 · c51a4de8
      Bob Moore 提交于
      Fixed a problem in the AML parser where the method thread
      count could be decremented below zero if any errors
      occurred during the method parse phase. This should
      eliminate AE_AML_METHOD_LIMIT exceptions seen on some
      machines. This also fixed a related regression with the
      mechanism that detects and corrects methods that cannot
      properly handle reentrancy (related to the deployment of
      the new OwnerId mechanism.)
      
      Eliminated the pre-parsing of control methods (to detect
      errors) during table load. Related to the problem above,
      this was causing unwind issues if any errors occurred
      during the parse, and it seemed to be overkill. A table
      load should not be aborted if there are problems with
      any single control method, thus rendering this feature
      rather pointless.
      
      Fixed a problem with the new table-driven resource manager
      where an internal buffer overflow could occur for small
      resource templates.
      
      Implemented a new external interface, acpi_get_vendor_resource()
      This interface will find and return a vendor-defined
      resource descriptor within a _CRS or _PRS
      method via an ACPI 3.0 UUID match. (from Bjorn Helgaas)
      
      Removed the length limit (200) on string objects as
      per the upcoming ACPI 3.0A specification. This affects
      the following areas of the interpreter: 1) any implicit
      conversion of a Buffer to a String, 2) a String object
      result of the ASL Concatentate operator, 3) the String
      object result of the ASL ToString operator.
      Signed-off-by: NBob Moore <robert.moore@intel.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      c51a4de8
    • B
      [ACPI] ACPICA 20051021 · 0897831b
      Bob Moore 提交于
      Implemented support for the EM64T and other x86_64
      processors. This essentially entails recognizing
      that these processors support non-aligned memory
      transfers. Previously, all 64-bit processors were assumed
      to lack hardware support for non-aligned transfers.
      
      Completed conversion of the Resource Manager to nearly
      full table-driven operation. Specifically, the resource
      conversion code (convert AML to internal format and the
      reverse) and the debug code to dump internal resource
      descriptors are fully table-driven, reducing code and data
      size and improving maintainability.
      
      The OSL interfaces for Acquire and Release Lock now use a
      64-bit flag word on 64-bit processors instead of a fixed
      32-bit word. (Alexey Starikovskiy)
      
      Implemented support within the resource conversion code
      for the Type-Specific byte within the various ACPI 3.0
      *WordSpace macros.
      
      Fixed some issues within the resource conversion code for
      the type-specific flags for both Memory and I/O address
      resource descriptors. For Memory, implemented support
      for the MTP and TTP flags. For I/O, split the TRS and TTP
      flags into two separate fields.
      Signed-off-by: NBob Moore <robert.moore@intel.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      0897831b
    • B
      [ACPI] ACPICA 20050930 · 50eca3eb
      Bob Moore 提交于
      Completed a major overhaul of the Resource Manager code -
      specifically, optimizations in the area of the AML/internal
      resource conversion code. The code has been optimized to
      simplify and eliminate duplicated code, CPU stack use has
      been decreased by optimizing function parameters and local
      variables, and naming conventions across the manager have
      been standardized for clarity and ease of maintenance (this
      includes function, parameter, variable, and struct/typedef
      names.)
      
      All Resource Manager dispatch and information tables have
      been moved to a single location for clarity and ease of
      maintenance. One new file was created, named "rsinfo.c".
      
      The ACPI return macros (return_ACPI_STATUS, etc.) have
      been modified to guarantee that the argument is
      not evaluated twice, making them less prone to macro
      side-effects. However, since there exists the possibility
      of additional stack use if a particular compiler cannot
      optimize them (such as in the debug generation case),
      the original macros are optionally available.  Note that
      some invocations of the return_VALUE macro may now cause
      size mismatch warnings; the return_UINT8 and return_UINT32
      macros are provided to eliminate these. (From Randy Dunlap)
      
      Implemented a new mechanism to enable debug tracing for
      individual control methods. A new external interface,
      acpi_debug_trace(), is provided to enable this mechanism. The
      intent is to allow the host OS to easily enable and disable
      tracing for problematic control methods. This interface
      can be easily exposed to a user or debugger interface if
      desired. See the file psxface.c for details.
      
      acpi_ut_callocate() will now return a valid pointer if a
      length of zero is specified - a length of one is used
      and a warning is issued. This matches the behavior of
      acpi_ut_allocate().
      Signed-off-by: NBob Moore <robert.moore@intel.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      50eca3eb