pblk performs recovery of open lines by storing the LBA in the per LBA
metadata field. Recovery therefore only works for drives that has this
field.

This patch adds support for packed metadata, which store l2p mapping
for open lines in last sector of every write unit and enables drives
without per IO metadata to recover open lines.

After this patch, drives with OOB size <16B will use packed metadata
and metadata size larger than16B will continue to use the device per
IO metadata.
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NIgor Konopko <igor.j.konopko@intel.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently pblk only check the size of I/O metadata and does not take
into account if this metadata is in a separate buffer or interleaved
in a single metadata buffer.

In reality only the first scenario is supported, where second mode will
break pblk functionality during any IO operation.

This patch prevents pblk to be instantiated in case device only
supports interleaved metadata.
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NIgor Konopko <igor.j.konopko@intel.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently lightnvm and pblk uses single DMA pool, for which the entry
size always is equal to PAGE_SIZE. The contents of each entry allocated
from the DMA pool consists of a PPA list (8bytes * 64), leaving
56bytes * 64 space for metadata. Since the metadata field can be bigger,
such as 128 bytes, the static size does not cover this use-case.

This patch adds support for I/O metadata above 56 bytes by changing DMA
pool size based on device meta size and allows pblk to use OOB metadata
>=16B.
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NIgor Konopko <igor.j.konopko@intel.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

pblk currently assumes that size of OOB metadata on drive is always
equal to size of pblk_sec_meta struct. This commit add helpers which will
allow to handle different sizes of OOB metadata on drive in the future.

After this patch only OOB metadata equal to 16 bytes is supported.
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NIgor Konopko <igor.j.konopko@intel.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently DMA allocated memory is reused on partial read
for lba_list_mem and lba_list_media arrays. In preparation
for dynamic DMA pool sizes we need to move this arrays
into pblk_pr_ctx structures.
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NIgor Konopko <igor.j.konopko@intel.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The current kref implementation around pblk global caches triggers a
false positive on refcount_inc_checked() (when called) as the kref is
initialized to 0. Instead of usint kref_inc() on a 0 reference, which is
in principle correct, use kref_init() to avoid the check. This is also
more explicit about what actually happens on cache creation.

In the process, do a small refactoring to use kref helpers.

Fixes: 1864de94 "lightnvm: pblk: stop recreating global caches"
Signed-off-by: NJavier González <javier@cnexlabs.com>
Reviewed-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently the geometry of an OCSSD is enumerated using a two step
approach:

First, nvm_register is called, the OCSSD identify command is issued,
and second the geometry sos and csecs values are read either from the
OCSSD identify if it is a 1.2 drive, or from the NVMe namespace data
structure if it is a 2.0 device.

This patch recombines it into a single step, such that nvm_register can
use the csecs and sos fields independent of which version is used. This
enables one to dynamically size the lightnvm subsystem dma pool.
Reviewed-by: NIgor Konopko <igor.j.konopko@intel.com>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

pblk's recovery path is single threaded and therefore a number of
assumptions regarding concurrency can be made. To avoid confusion, make
this explicit with a couple of comments in the code.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Protect the list_add on the pblk_line_init_bb() error
path in case this code is used for some other purpose
in the future.
Signed-off-by: NHua Su <suhua.tanke@gmail.com>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NHua Su <suhua.tanke@gmail.com>
Updated description.
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove the call to pblk_line_replace_data as it returns
directly because we have not set l_mg->data_next yet.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: NJavier González <javier@javigon.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The chunk metadata is allocated with vmalloc, so we need to use
vfree to free it.

Fixes: 090ee26f ("lightnvm: use internal allocation for chunk log page")
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: NJavier González <javier@javigon.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

ADDR_POOL_SIZE is not used anymore, so remove the macro.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: NJavier González <javier@javigon.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In a worst-case scenario (random writes), OP% of sectors
in each line will be invalid, and we will then need
to move data out of 100/OP% lines to free a single line.

So, to prevent the possibility of running out of lines,
temporarily block user writes when there is less than
100/OP% free lines.

Also ensure that pblk creation does not produce instances
with insufficient over provisioning.

Insufficient over-provising is not a problem on real hardware,
but often an issue when running QEMU simulations (with few lines).
100 lines is enough to create a sane instance with the standard
(11%) over provisioning.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: NJavier González <javier@javigon.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If mapping fails (i.e. when running out of lines), handle the error
and stop writing.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: NJavier González <javier@javigon.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Lines inflicted with write errors lines might be recovered
if they have not been recycled after write error garbage collection.

Ensure that the emeta accounting of valid lbas is correct
for such lines to avoid recovery inconsistencies.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: NJavier González <javier@javigon.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Make sure we only look up valid lba addresses on the resubmission path.

If an lba is invalidated in the write buffer, that sector will be
submitted to disk (as it is already mapped to a ppa), and that write
might fail, resulting in a crash when trying to look up the lba in the
mapping table (as the lba is marked as invalid).
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: NJavier González <javier@javigon.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The check for chunk closes suffers from an off-by-one issue, leading
to chunk close events not being traced.

Fixes: 4c44abf4 ("lightnvm: pblk: add trace events for chunk states")
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With gcc 4.1:

    drivers/lightnvm/core.c: In function ‘nvm_get_bb_meta’:
    drivers/lightnvm/core.c:977: warning: ‘ret’ may be used uninitialized in this function

and

    drivers/nvme/host/lightnvm.c: In function ‘nvme_nvm_get_chk_meta’:
    drivers/nvme/host/lightnvm.c:580: warning: ‘ret’ may be used uninitialized in this function

Indeed, if (for the former) the number of channels or LUNs is zero, or
(for both) the passed number of chunks is zero, ret will be returned
uninitialized.

Fix this by preinitializing ret to zero.

Fixes: aff3fb18 ("lightnvm: move bad block and chunk state logic to core")
Fixes: a294c199 ("lightnvm: implement get log report chunk helpers")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The smeta area l2p mapping is empty, and actually the
recovery procedure only need to restore data sector's l2p
mapping. So ignore the smeta oob scan.
Signed-off-by: NZhoujie Wu <zjwu@marvell.com>
Reviewed-by: NJavier González <javier@javigon.com>
Reviewed-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The md->wait waitqueue is used by both bio-based and request-based DM.
Commit dbd3bbd2 ("dm rq: leverage blk_mq_queue_busy() to check for
outstanding IO") lost sight of the requirement that
dm_wait_for_completion() must work with all types of DM devices.

Fix md_in_flight() to call the blk-mq or bio-based method accordingly.

Fixes: dbd3bbd2 ("dm rq: leverage blk_mq_queue_busy() to check for outstanding IO")
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Guenter reported an boot hang issue on HPPA after we default to 0 poll
queues. We have two issues in the queue count calculations:

1) We don't separate the poll queues from the read/write queues. This is
   important, since the former doesn't need interrupts.
2) The adjust logic is broken.

Adjust the poll queue count before doing nvme_calc_io_queues(). The poll
queue count is only limited by the IO queue count we were able to get
from the controller, not failures in the IRQ allocation loop. This
leaves nvme_calc_io_queues() just adjusting the read/write queue map.
Reported-by: NReported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

After switching to percpu inflight counters, the inflight check
is totally buggy. It's perfectly valid for some counters to be
non-zero while having a total inflight IO count of 0, that's how
these kinds of counters work (inc on one CPU, dec on another).
Fix the md_in_flight() check to sum all counters before returning
a false positive, potentially.

While at it, remove the inflight read for IO completion. We don't
need it, just wake anyone that's waiting for the IO count to drop
to zero. The caller needs to re-check that value anyway when woken,
which it does.

Fixes: 6f757231 ("dm: remove the pending IO accounting")
Acked-by: NMike Snitzer <snitzer@redhat.com>
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For cases where we can only fail with IO in-flight, we should be using
BLK_STS_DEV_RESOURCE instead of BLK_STS_RESOURCE. The latter refers to
system wide resource constraints.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The "cmd_slot_unal" semaphore is never used in a blocking way
but only as an atomic counter. Change the code to using
atomic_dec_if_positive() as a better API.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove the "pending" atomic counters, that duplicate block-core's
in_flight counters, and update md_in_flight() to look at percpu
in_flight counters.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The previous patches deleted all the code that needed the second value
returned from part_in_flight - now the kernel only uses the first value.

Consequently, part_in_flight (and blk_mq_in_flight) may be changed so that
it only returns one value.

This patch just refactors the code, there's no functional change.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now when part_round_stats is gone, we can switch to per-cpu in-flight
counters.

We use the local-atomic type local_t, so that if part_inc_in_flight or
part_dec_in_flight is reentrantly called from an interrupt, the value will
be correct.

The other counters could be corrupted due to reentrant interrupt, but the
corruption only results in slight counter skew - the in_flight counter
must be exact, so it needs local_t.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We want to convert to per-cpu in_flight counters.

The function part_round_stats needs the in_flight counter every jiffy, it
would be too costly to sum all the percpu variables every jiffy, so it
must be deleted. part_round_stats is used to calculate two counters -
time_in_queue and io_ticks.

time_in_queue can be calculated without part_round_stats, by adding the
duration of the I/O when the I/O ends (the value is almost as exact as the
previously calculated value, except that time for in-progress I/Os is not
counted).

io_ticks can be approximated by increasing the value when I/O is started
or ended and the jiffies value has changed. If the I/Os take less than a
jiffy, the value is as exact as the previously calculated value. If the
I/Os take more than a jiffy, io_ticks can drift behind the previously
calculated value.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

All of part_stat_* and related methods are used with preempt disabled,
so there is no need to pass cpu around to allow of them.  Just call
smp_processor_id() as needed.
Suggested-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now that request-based dm-multipath only supports blk-mq, make use of
the newly introduced blk_mq_queue_busy() to check for outstanding IO --
rather than (ab)using the block core's in_flight counters.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

generic_start_io_acct and generic_end_io_acct already update the variable
in_flight using atomic operations, so we don't have to overwrite them
again.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull in v4.20-rc6 to resolve the conflict in NVMe, but also to get the
two corruption fixes. We're going to be overhauling the direct dispatch
path, and we need to do that on top of the changes we made for that
in mainline.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Ming reports that lockdep spews the following trace. What this
essentially says is that the sbitmap swap_lock was used inconsistently
in IRQ enabled and disabled context, and that is usually indicative of a
bug that will cause a deadlock.

For this case, it's a false positive. The swap_lock is used from process
context only, when we swap the bits in the word and cleared mask. We
also end up doing that when we are getting a driver tag, from the
blk_mq_mark_tag_wait(), and from there we hold the waitqueue lock with
IRQs disabled. However, this isn't from an actual IRQ, it's still
process context.

In lieu of a better way to fix this, simply always disable interrupts
when grabbing the swap_lock if lockdep is enabled.

[  100.967642] ================start test sanity/001================
[  101.238280] null: module loaded
[  106.093735]
[  106.094012] =====================================================
[  106.094854] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[  106.095759] 4.20.0-rc3_5d2ee712_for-next+ #1 Not tainted
[  106.096551] -----------------------------------------------------
[  106.097386] fio/1043 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[  106.098231] 000000004c43fa71
(&(&sb->map[i].swap_lock)->rlock){+.+.}, at: sbitmap_get+0xd5/0x22c
[  106.099431]
[  106.099431] and this task is already holding:
[  106.100229] 000000007eec8b2f
(&(&hctx->dispatch_wait_lock)->rlock){....}, at:
blk_mq_dispatch_rq_list+0x4c1/0xd7c
[  106.101630] which would create a new lock dependency:
[  106.102326]  (&(&hctx->dispatch_wait_lock)->rlock){....} ->
(&(&sb->map[i].swap_lock)->rlock){+.+.}
[  106.103553]
[  106.103553] but this new dependency connects a SOFTIRQ-irq-safe lock:
[  106.104580]  (&sbq->ws[i].wait){..-.}
[  106.104582]
[  106.104582] ... which became SOFTIRQ-irq-safe at:
[  106.105751]   _raw_spin_lock_irqsave+0x4b/0x82
[  106.106284]   __wake_up_common_lock+0x119/0x1b9
[  106.106825]   sbitmap_queue_wake_up+0x33f/0x383
[  106.107456]   sbitmap_queue_clear+0x4c/0x9a
[  106.108046]   __blk_mq_free_request+0x188/0x1d3
[  106.108581]   blk_mq_free_request+0x23b/0x26b
[  106.109102]   scsi_end_request+0x345/0x5d7
[  106.109587]   scsi_io_completion+0x4b5/0x8f0
[  106.110099]   scsi_finish_command+0x412/0x456
[  106.110615]   scsi_softirq_done+0x23f/0x29b
[  106.111115]   blk_done_softirq+0x2a7/0x2e6
[  106.111608]   __do_softirq+0x360/0x6ad
[  106.112062]   run_ksoftirqd+0x2f/0x5b
[  106.112499]   smpboot_thread_fn+0x3a5/0x3db
[  106.113000]   kthread+0x1d4/0x1e4
[  106.113457]   ret_from_fork+0x3a/0x50
[  106.113969]
[  106.113969] to a SOFTIRQ-irq-unsafe lock:
[  106.114672]  (&(&sb->map[i].swap_lock)->rlock){+.+.}
[  106.114674]
[  106.114674] ... which became SOFTIRQ-irq-unsafe at:
[  106.116000] ...
[  106.116003]   _raw_spin_lock+0x33/0x64
[  106.116676]   sbitmap_get+0xd5/0x22c
[  106.117134]   __sbitmap_queue_get+0xe8/0x177
[  106.117731]   __blk_mq_get_tag+0x1e6/0x22d
[  106.118286]   blk_mq_get_tag+0x1db/0x6e4
[  106.118756]   blk_mq_get_driver_tag+0x161/0x258
[  106.119383]   blk_mq_dispatch_rq_list+0x28e/0xd7c
[  106.120043]   blk_mq_do_dispatch_sched+0x23a/0x287
[  106.120607]   blk_mq_sched_dispatch_requests+0x379/0x3fc
[  106.121234]   __blk_mq_run_hw_queue+0x137/0x17e
[  106.121781]   __blk_mq_delay_run_hw_queue+0x80/0x25f
[  106.122366]   blk_mq_run_hw_queue+0x151/0x187
[  106.122887]   blk_mq_sched_insert_requests+0x13f/0x175
[  106.123492]   blk_mq_flush_plug_list+0x7d6/0x81b
[  106.124042]   blk_flush_plug_list+0x392/0x3d7
[  106.124557]   blk_finish_plug+0x37/0x4f
[  106.125019]   read_pages+0x3ef/0x430
[  106.125446]   __do_page_cache_readahead+0x18e/0x2fc
[  106.126027]   force_page_cache_readahead+0x121/0x133
[  106.126621]   page_cache_sync_readahead+0x35f/0x3bb
[  106.127229]   generic_file_buffered_read+0x410/0x1860
[  106.127932]   __vfs_read+0x319/0x38f
[  106.128415]   vfs_read+0xd2/0x19a
[  106.128817]   ksys_read+0xb9/0x135
[  106.129225]   do_syscall_64+0x140/0x385
[  106.129684]   entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  106.130292]
[  106.130292] other info that might help us debug this:
[  106.130292]
[  106.131226] Chain exists of:
[  106.131226]   &sbq->ws[i].wait -->
&(&hctx->dispatch_wait_lock)->rlock -->
&(&sb->map[i].swap_lock)->rlock
[  106.131226]
[  106.132865]  Possible interrupt unsafe locking scenario:
[  106.132865]
[  106.133659]        CPU0                    CPU1
[  106.134194]        ----                    ----
[  106.134733]   lock(&(&sb->map[i].swap_lock)->rlock);
[  106.135318]                                local_irq_disable();
[  106.136014]                                lock(&sbq->ws[i].wait);
[  106.136747]
lock(&(&hctx->dispatch_wait_lock)->rlock);
[  106.137742]   <Interrupt>
[  106.138110]     lock(&sbq->ws[i].wait);
[  106.138625]
[  106.138625]  *** DEADLOCK ***
[  106.138625]
[  106.139430] 3 locks held by fio/1043:
[  106.139947]  #0: 0000000076ff0fd9 (rcu_read_lock){....}, at:
hctx_lock+0x29/0xe8
[  106.140813]  #1: 000000002feb1016 (&sbq->ws[i].wait){..-.}, at:
blk_mq_dispatch_rq_list+0x4ad/0xd7c
[  106.141877]  #2: 000000007eec8b2f
(&(&hctx->dispatch_wait_lock)->rlock){....}, at:
blk_mq_dispatch_rq_list+0x4c1/0xd7c
[  106.143267]
[  106.143267] the dependencies between SOFTIRQ-irq-safe lock and the
holding lock:
[  106.144351]  -> (&sbq->ws[i].wait){..-.} ops: 82 {
[  106.144926]     IN-SOFTIRQ-W at:
[  106.145314]                       _raw_spin_lock_irqsave+0x4b/0x82
[  106.146042]                       __wake_up_common_lock+0x119/0x1b9
[  106.146785]                       sbitmap_queue_wake_up+0x33f/0x383
[  106.147567]                       sbitmap_queue_clear+0x4c/0x9a
[  106.148379]                       __blk_mq_free_request+0x188/0x1d3
[  106.149148]                       blk_mq_free_request+0x23b/0x26b
[  106.149864]                       scsi_end_request+0x345/0x5d7
[  106.150546]                       scsi_io_completion+0x4b5/0x8f0
[  106.151367]                       scsi_finish_command+0x412/0x456
[  106.152157]                       scsi_softirq_done+0x23f/0x29b
[  106.152855]                       blk_done_softirq+0x2a7/0x2e6
[  106.153537]                       __do_softirq+0x360/0x6ad
[  106.154280]                       run_ksoftirqd+0x2f/0x5b
[  106.155020]                       smpboot_thread_fn+0x3a5/0x3db
[  106.155828]                       kthread+0x1d4/0x1e4
[  106.156526]                       ret_from_fork+0x3a/0x50
[  106.157267]     INITIAL USE at:
[  106.157713]                      _raw_spin_lock_irqsave+0x4b/0x82
[  106.158542]                      prepare_to_wait_exclusive+0xa8/0x215
[  106.159421]                      blk_mq_get_tag+0x34f/0x6e4
[  106.160186]                      blk_mq_get_request+0x48e/0xaef
[  106.160997]                      blk_mq_make_request+0x27e/0xbd2
[  106.161828]                      generic_make_request+0x4d1/0x873
[  106.162661]                      submit_bio+0x20c/0x253
[  106.163379]                      mpage_bio_submit+0x44/0x4b
[  106.164142]                      mpage_readpages+0x3c2/0x407
[  106.164919]                      read_pages+0x13a/0x430
[  106.165633]                      __do_page_cache_readahead+0x18e/0x2fc
[  106.166530]                      force_page_cache_readahead+0x121/0x133
[  106.167439]                      page_cache_sync_readahead+0x35f/0x3bb
[  106.168337]                      generic_file_buffered_read+0x410/0x1860
[  106.169255]                      __vfs_read+0x319/0x38f
[  106.169977]                      vfs_read+0xd2/0x19a
[  106.170662]                      ksys_read+0xb9/0x135
[  106.171356]                      do_syscall_64+0x140/0x385
[  106.172120]                      entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  106.173051]   }
[  106.173308]   ... key      at: [<ffffffff85094600>] __key.26481+0x0/0x40
[  106.174219]   ... acquired at:
[  106.174646]    _raw_spin_lock+0x33/0x64
[  106.175183]    blk_mq_dispatch_rq_list+0x4c1/0xd7c
[  106.175843]    blk_mq_do_dispatch_sched+0x23a/0x287
[  106.176518]    blk_mq_sched_dispatch_requests+0x379/0x3fc
[  106.177262]    __blk_mq_run_hw_queue+0x137/0x17e
[  106.177900]    __blk_mq_delay_run_hw_queue+0x80/0x25f
[  106.178591]    blk_mq_run_hw_queue+0x151/0x187
[  106.179207]    blk_mq_sched_insert_requests+0x13f/0x175
[  106.179926]    blk_mq_flush_plug_list+0x7d6/0x81b
[  106.180571]    blk_flush_plug_list+0x392/0x3d7
[  106.181187]    blk_finish_plug+0x37/0x4f
[  106.181737]    __se_sys_io_submit+0x171/0x304
[  106.182346]    do_syscall_64+0x140/0x385
[  106.182895]    entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  106.183607]
[  106.183830] -> (&(&hctx->dispatch_wait_lock)->rlock){....} ops: 1 {
[  106.184691]    INITIAL USE at:
[  106.185119]                    _raw_spin_lock+0x33/0x64
[  106.185838]                    blk_mq_dispatch_rq_list+0x4c1/0xd7c
[  106.186697]                    blk_mq_do_dispatch_sched+0x23a/0x287
[  106.187551]                    blk_mq_sched_dispatch_requests+0x379/0x3fc
[  106.188481]                    __blk_mq_run_hw_queue+0x137/0x17e
[  106.189307]                    __blk_mq_delay_run_hw_queue+0x80/0x25f
[  106.190189]                    blk_mq_run_hw_queue+0x151/0x187
[  106.190989]                    blk_mq_sched_insert_requests+0x13f/0x175
[  106.191902]                    blk_mq_flush_plug_list+0x7d6/0x81b
[  106.192739]                    blk_flush_plug_list+0x392/0x3d7
[  106.193535]                    blk_finish_plug+0x37/0x4f
[  106.194269]                    __se_sys_io_submit+0x171/0x304
[  106.195059]                    do_syscall_64+0x140/0x385
[  106.195794]                    entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  106.196705]  }
[  106.196950]  ... key      at: [<ffffffff84880620>] __key.51231+0x0/0x40
[  106.197853]  ... acquired at:
[  106.198270]    lock_acquire+0x280/0x2f3
[  106.198806]    _raw_spin_lock+0x33/0x64
[  106.199337]    sbitmap_get+0xd5/0x22c
[  106.199850]    __sbitmap_queue_get+0xe8/0x177
[  106.200450]    __blk_mq_get_tag+0x1e6/0x22d
[  106.201035]    blk_mq_get_tag+0x1db/0x6e4
[  106.201589]    blk_mq_get_driver_tag+0x161/0x258
[  106.202237]    blk_mq_dispatch_rq_list+0x5b9/0xd7c
[  106.202902]    blk_mq_do_dispatch_sched+0x23a/0x287
[  106.203572]    blk_mq_sched_dispatch_requests+0x379/0x3fc
[  106.204316]    __blk_mq_run_hw_queue+0x137/0x17e
[  106.204956]    __blk_mq_delay_run_hw_queue+0x80/0x25f
[  106.205649]    blk_mq_run_hw_queue+0x151/0x187
[  106.206269]    blk_mq_sched_insert_requests+0x13f/0x175
[  106.206997]    blk_mq_flush_plug_list+0x7d6/0x81b
[  106.207644]    blk_flush_plug_list+0x392/0x3d7
[  106.208264]    blk_finish_plug+0x37/0x4f
[  106.208814]    __se_sys_io_submit+0x171/0x304
[  106.209415]    do_syscall_64+0x140/0x385
[  106.209965]    entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  106.210684]
[  106.210904]
[  106.210904] the dependencies between the lock to be acquired
[  106.210905]  and SOFTIRQ-irq-unsafe lock:
[  106.212541] -> (&(&sb->map[i].swap_lock)->rlock){+.+.} ops: 1969 {
[  106.213393]    HARDIRQ-ON-W at:
[  106.213840]                     _raw_spin_lock+0x33/0x64
[  106.214570]                     sbitmap_get+0xd5/0x22c
[  106.215282]                     __sbitmap_queue_get+0xe8/0x177
[  106.216086]                     __blk_mq_get_tag+0x1e6/0x22d
[  106.216876]                     blk_mq_get_tag+0x1db/0x6e4
[  106.217627]                     blk_mq_get_driver_tag+0x161/0x258
[  106.218465]                     blk_mq_dispatch_rq_list+0x28e/0xd7c
[  106.219326]                     blk_mq_do_dispatch_sched+0x23a/0x287
[  106.220198]                     blk_mq_sched_dispatch_requests+0x379/0x3fc
[  106.221138]                     __blk_mq_run_hw_queue+0x137/0x17e
[  106.221975]                     __blk_mq_delay_run_hw_queue+0x80/0x25f
[  106.222874]                     blk_mq_run_hw_queue+0x151/0x187
[  106.223686]                     blk_mq_sched_insert_requests+0x13f/0x175
[  106.224597]                     blk_mq_flush_plug_list+0x7d6/0x81b
[  106.225444]                     blk_flush_plug_list+0x392/0x3d7
[  106.226255]                     blk_finish_plug+0x37/0x4f
[  106.227006]                     read_pages+0x3ef/0x430
[  106.227717]                     __do_page_cache_readahead+0x18e/0x2fc
[  106.228595]                     force_page_cache_readahead+0x121/0x133
[  106.229491]                     page_cache_sync_readahead+0x35f/0x3bb
[  106.230373]                     generic_file_buffered_read+0x410/0x1860
[  106.231277]                     __vfs_read+0x319/0x38f
[  106.231986]                     vfs_read+0xd2/0x19a
[  106.232666]                     ksys_read+0xb9/0x135
[  106.233350]                     do_syscall_64+0x140/0x385
[  106.234097]                     entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  106.235012]    SOFTIRQ-ON-W at:
[  106.235460]                     _raw_spin_lock+0x33/0x64
[  106.236195]                     sbitmap_get+0xd5/0x22c
[  106.236913]                     __sbitmap_queue_get+0xe8/0x177
[  106.237715]                     __blk_mq_get_tag+0x1e6/0x22d
[  106.238488]                     blk_mq_get_tag+0x1db/0x6e4
[  106.239244]                     blk_mq_get_driver_tag+0x161/0x258
[  106.240079]                     blk_mq_dispatch_rq_list+0x28e/0xd7c
[  106.240937]                     blk_mq_do_dispatch_sched+0x23a/0x287
[  106.241806]                     blk_mq_sched_dispatch_requests+0x379/0x3fc
[  106.242751]                     __blk_mq_run_hw_queue+0x137/0x17e
[  106.243579]                     __blk_mq_delay_run_hw_queue+0x80/0x25f
[  106.244469]                     blk_mq_run_hw_queue+0x151/0x187
[  106.245277]                     blk_mq_sched_insert_requests+0x13f/0x175
[  106.246191]                     blk_mq_flush_plug_list+0x7d6/0x81b
[  106.247044]                     blk_flush_plug_list+0x392/0x3d7
[  106.247859]                     blk_finish_plug+0x37/0x4f
[  106.248749]                     read_pages+0x3ef/0x430
[  106.249463]                     __do_page_cache_readahead+0x18e/0x2fc
[  106.250357]                     force_page_cache_readahead+0x121/0x133
[  106.251263]                     page_cache_sync_readahead+0x35f/0x3bb
[  106.252157]                     generic_file_buffered_read+0x410/0x1860
[  106.253084]                     __vfs_read+0x319/0x38f
[  106.253808]                     vfs_read+0xd2/0x19a
[  106.254488]                     ksys_read+0xb9/0x135
[  106.255186]                     do_syscall_64+0x140/0x385
[  106.255943]                     entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  106.256867]    INITIAL USE at:
[  106.257300]                    _raw_spin_lock+0x33/0x64
[  106.258033]                    sbitmap_get+0xd5/0x22c
[  106.258747]                    __sbitmap_queue_get+0xe8/0x177
[  106.259542]                    __blk_mq_get_tag+0x1e6/0x22d
[  106.260320]                    blk_mq_get_tag+0x1db/0x6e4
[  106.261072]                    blk_mq_get_driver_tag+0x161/0x258
[  106.261902]                    blk_mq_dispatch_rq_list+0x28e/0xd7c
[  106.262762]                    blk_mq_do_dispatch_sched+0x23a/0x287
[  106.263626]                    blk_mq_sched_dispatch_requests+0x379/0x3fc
[  106.264571]                    __blk_mq_run_hw_queue+0x137/0x17e
[  106.265409]                    __blk_mq_delay_run_hw_queue+0x80/0x25f
[  106.266302]                    blk_mq_run_hw_queue+0x151/0x187
[  106.267111]                    blk_mq_sched_insert_requests+0x13f/0x175
[  106.268028]                    blk_mq_flush_plug_list+0x7d6/0x81b
[  106.268878]                    blk_flush_plug_list+0x392/0x3d7
[  106.269694]                    blk_finish_plug+0x37/0x4f
[  106.270432]                    read_pages+0x3ef/0x430
[  106.271139]                    __do_page_cache_readahead+0x18e/0x2fc
[  106.272040]                    force_page_cache_readahead+0x121/0x133
[  106.272932]                    page_cache_sync_readahead+0x35f/0x3bb
[  106.273811]                    generic_file_buffered_read+0x410/0x1860
[  106.274709]                    __vfs_read+0x319/0x38f
[  106.275407]                    vfs_read+0xd2/0x19a
[  106.276074]                    ksys_read+0xb9/0x135
[  106.276764]                    do_syscall_64+0x140/0x385
[  106.277500]                    entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  106.278417]  }
[  106.278676]  ... key      at: [<ffffffff85094640>] __key.26212+0x0/0x40
[  106.279586]  ... acquired at:
[  106.280026]    lock_acquire+0x280/0x2f3
[  106.280559]    _raw_spin_lock+0x33/0x64
[  106.281101]    sbitmap_get+0xd5/0x22c
[  106.281610]    __sbitmap_queue_get+0xe8/0x177
[  106.282221]    __blk_mq_get_tag+0x1e6/0x22d
[  106.282809]    blk_mq_get_tag+0x1db/0x6e4
[  106.283368]    blk_mq_get_driver_tag+0x161/0x258
[  106.284018]    blk_mq_dispatch_rq_list+0x5b9/0xd7c
[  106.284685]    blk_mq_do_dispatch_sched+0x23a/0x287
[  106.285371]    blk_mq_sched_dispatch_requests+0x379/0x3fc
[  106.286135]    __blk_mq_run_hw_queue+0x137/0x17e
[  106.286806]    __blk_mq_delay_run_hw_queue+0x80/0x25f
[  106.287515]    blk_mq_run_hw_queue+0x151/0x187
[  106.288149]    blk_mq_sched_insert_requests+0x13f/0x175
[  106.289041]    blk_mq_flush_plug_list+0x7d6/0x81b
[  106.289912]    blk_flush_plug_list+0x392/0x3d7
[  106.290590]    blk_finish_plug+0x37/0x4f
[  106.291238]    __se_sys_io_submit+0x171/0x304
[  106.291864]    do_syscall_64+0x140/0x385
[  106.292534]    entry_SYSCALL_64_after_hwframe+0x49/0xbe
Reported-by: NMing Lei <ming.lei@redhat.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull networking fixes from David Miller:
 "A decent batch of fixes here. I'd say about half are for problems that
  have existed for a while, and half are for new regressions added in
  the 4.20 merge window.

   1) Fix 10G SFP phy module detection in mvpp2, from Baruch Siach.

   2) Revert bogus emac driver change, from Benjamin Herrenschmidt.

   3) Handle BPF exported data structure with pointers when building
      32-bit userland, from Daniel Borkmann.

   4) Memory leak fix in act_police, from Davide Caratti.

   5) Check RX checksum offload in RX descriptors properly in aquantia
      driver, from Dmitry Bogdanov.

   6) SKB unlink fix in various spots, from Edward Cree.

   7) ndo_dflt_fdb_dump() only works with ethernet, enforce this, from
      Eric Dumazet.

   8) Fix FID leak in mlxsw driver, from Ido Schimmel.

   9) IOTLB locking fix in vhost, from Jean-Philippe Brucker.

  10) Fix SKB truesize accounting in ipv4/ipv6/netfilter frag memory
      limits otherwise namespace exit can hang. From Jiri Wiesner.

  11) Address block parsing length fixes in x25 from Martin Schiller.

  12) IRQ and ring accounting fixes in bnxt_en, from Michael Chan.

  13) For tun interfaces, only iface delete works with rtnl ops, enforce
      this by disallowing add. From Nicolas Dichtel.

  14) Use after free in liquidio, from Pan Bian.

  15) Fix SKB use after passing to netif_receive_skb(), from Prashant
      Bhole.

  16) Static key accounting and other fixes in XPS from Sabrina Dubroca.

  17) Partially initialized flow key passed to ip6_route_output(), from
      Shmulik Ladkani.

  18) Fix RTNL deadlock during reset in ibmvnic driver, from Thomas
      Falcon.

  19) Several small TCP fixes (off-by-one on window probe abort, NULL
      deref in tail loss probe, SNMP mis-estimations) from Yuchung
      Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (93 commits)
  net/sched: cls_flower: Reject duplicated rules also under skip_sw
  bnxt_en: Fix _bnxt_get_max_rings() for 57500 chips.
  bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips.
  bnxt_en: Keep track of reserved IRQs.
  bnxt_en: Fix CNP CoS queue regression.
  net/mlx4_core: Correctly set PFC param if global pause is turned off.
  Revert "net/ibm/emac: wrong bit is used for STA control"
  neighbour: Avoid writing before skb->head in neigh_hh_output()
  ipv6: Check available headroom in ip6_xmit() even without options
  tcp: lack of available data can also cause TSO defer
  ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output
  mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl
  mlxsw: spectrum_router: Relax GRE decap matching check
  mlxsw: spectrum_switchdev: Avoid leaking FID's reference count
  mlxsw: spectrum_nve: Remove easily triggerable warnings
  ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes
  sctp: frag_point sanity check
  tcp: fix NULL ref in tail loss probe
  tcp: Do not underestimate rwnd_limited
  net: use skb_list_del_init() to remove from RX sublists
  ...

Pull x86 fixes from Ingo Molnar:
 "Three fixes: a boot parameter re-(re-)fix, a retpoline build artifact
  fix and an LLVM workaround"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Drop implicit common-page-size linker flag
  x86/build: Fix compiler support check for CONFIG_RETPOLINE
  x86/boot: Clear RSDP address in boot_params for broken loaders

Pull kprobes fixes from Ingo Molnar:
 "Two kprobes fixes: a blacklist fix and an instruction patching related
  corruption fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kprobes/x86: Blacklist non-attachable interrupt functions
  kprobes/x86: Fix instruction patching corruption when copying more than one RIP-relative instruction

Pull EFI fixes from Ingo Molnar:
 "Two fixes: a large-system fix and an earlyprintk fix with certain
  resolutions"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/earlyprintk/efi: Fix infinite loop on some screen widths
  x86/efi: Allocate e820 buffer before calling efi_exit_boot_service

Currently, duplicated rules are rejected only for skip_hw or "none",
hence allowing users to push duplicates into HW for no reason.

Use the flower tables to protect for that.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Reported-by: NChris Mi <chrism@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>