The first test aims to check guc_init_doorbell_hw, changing the existing
guc clients and doorbells state before calling it.

The second test tries to create as many clients as it is currently possible
(currently limited to max number of doorbells) and exercise the doorbell
alloc/dealloc code.

Since our usage mode require very few clients/doorbells, this code has
been exercised very lightly and it's good to have a simple test for it.

As reference, this test already helped identify the bug fixed by
commit 7f1ea2ac ("drm/i915/guc: Fix doorbell id selection").

v2: Extend number of clients; check for client allocation failure when
number of doorbells is exceeded; validate client properties; reuse
guc_init_doorbell_hw (Chris).

v3: guc_init_doorbell_hw test added per Chris suggestion.

v4: Try to explain why guc_init_doorbell_hw exist and comment some
details in the subtest.

v5: Remove redundant pr_info at the beginning of each subtest (Chris);
rebase (s/i915_guc_client/intel_guc_client/).
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171116220632.1909-1-michel.thierry@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Starting on GLK we support HDMI 2.0. So this patch only
extend the work Shashank has made to GLK to CNL.

v2: The version that compiles :/
v3: Invert order to newer || older platforms check. (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115184205.8104-1-rodrigo.vivi@intel.com

I confess I never fully understood that previous calculation,
so this is not a "fix". But let's simplify this math
so poor brains like mine can read and make some sense of
it in the future.

v2: Don't follow the spec since that gives invalid
    values and it is also confusing. This Ville's
    version is much simpler.
v3: Use u64 cast instead of declaring a u64 dco. (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115184257.8633-1-rodrigo.vivi@intel.com

Accordingly to spec "If Kdiv != 2, then Qdiv must be 1."
but we already handle qdiv values properly and this case here
should be spurious. But instead of blindly replacing let's
warn loudly instead. Because it means something was really
wrong on initial setup.

Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-6-rodrigo.vivi@intel.com

Spec describe all values in MHz. We handle our
clocks in KHz. This includes the best_dco_centrality that was
forgot in the same unity as spec. Consequently we couldn't
get a good divider for high frequenies. Hence HDMI 2.0 wasn't
working.

Spec tells 999999 for initial best_dco_centrality meaning the
max value in MHz.
Since we convert dco from MHz to KHz we also need to convert
this initial best_doc_centrality to 999999000 or 999999999
or even better, to the max that its variable allow.

This patch also replaces the use of "* KHz(1)" with the values
directly on KHz to avoid future confusion.

v2: Use U32_MAX instead of random 99999 as spec tells. (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114234223.10600-1-rodrigo.vivi@intel.com

- 64 bits is not needed for afe_clock now we don't convert
  that to Hz.
- 16 bits is not enough for all dco stuff.
- unsigned is not relevant/needed for all divisors values.

Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-4-rodrigo.vivi@intel.com

No functional change. Just starting the wrpll fixes
with a clean-up to make units a bit more clear.

Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-3-rodrigo.vivi@intel.com

"Display software must leave this field at the default value.
It no longer needs to be configured as part of PLL programming."

We respect this already and we are setting up the default
one line below: "DPLL_CFGCR1_CENTRAL_FREQ".

Also we don't touch anywhere else this central_freq for cnl.
So let's remove from the final write.

No functional change. Only a clean-up patch.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-2-rodrigo.vivi@intel.com

When operating on the live_ggtt we have to find a usuable hole for our
test. It is possible for there to be no hole we can use, so initialise
the err to 0 for the early exit.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115152558.31252-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Avoid touching PIPECONF in intel_sanitize_crtc() unless the pipe is
actually on. Should cure some unclaimed register accesses during reset,
as we are rather cavalier in our approach to powerdomain management.

We don't have to sanitize this if the pipe is off since we will
overwrite the frame start delay anyway when turning the pipe on.

v2: Amended commit message to implicate the reset path (Chris)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102249Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115200442.15051-1-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

With all component structures and functions named appropriately, change
the names of GuC submission source files. There were bunch of style issues
in guc_submission.c that are highlighted now by checkpatch. Fix those.
Update name in Documentation/gpu. (Joonas)

v2: Rebase.

v3: Rebase.
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NOscar Mateo <oscar.mateo@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-6-git-send-email-sagar.a.kamble@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

GuC submission clients are currently being used in kernel only hence
update the structure name to intel_guc_client.
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NOscar Mateo <oscar.mateo@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-5-git-send-email-sagar.a.kamble@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

i915 GuC submission is hardware interface and GuC APIs that are not user
facing should be named intel_guc* hence we change GuC submission related
functions name prefix to intel_guc. Also changed the parameter to these
functions to intel_guc struct.

v2: Using local guc variable in intel_uc_fini_hw. (Michal Wajdeczko)
Rebase.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NOscar Mateo <oscar.mateo@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-4-git-send-email-sagar.a.kamble@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

i915_guc_submit, i915_guc_dequeue, i915_guc_submission_park and
i915_guc_submission_upark are functions internal to GuC submission
hence remove "i915_" prefix.
Suggested-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-3-git-send-email-sagar.a.kamble@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

intel_lrc_irq_handler and i915_guc_irq_handler are HW submission related
tasklet functions. Name them with "submission_tasklet" suffix and
remove intel/i915 prefix as they are static. Also rename irq_tasklet
as just tasklet for clarity.

v2: s/_bh/_tasklet (Chris)
Suggested-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-2-git-send-email-sagar.a.kamble@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We check whether the multiplies will overflow prior to calling
kmalloc_array so that we can respond with -EINVAL for the invalid user
arguments rather than treating it as an -ENOMEM that would otherwise
occur. However, as Dan Carpenter pointed out, we did an addition on the
unsigned int prior to passing to kmalloc_array where it would be
promoted to size_t for the calculation, thereby allowing it to overflow
and underallocate.

v2: buffer_count is currently limited to INT_MAX because we treat it as
signaled variable for LUT_HANDLE in eb_lookup_vma
v3: Move common checks for eb1/eb2 into the same function
v4: Put the check back for nfence*sizeof(user_fence) overflow
v5: access_ok uses ULONG_MAX but kvmalloc_array uses SIZE_MAX
v6: size_t and unsigned long are not type-equivalent on 32b
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171116105059.25142-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

When we call intel_engine_cancel_signaling() to stop reporting when
a request is completed via an asynchronous signal, we remove that request
from the breadcrumb wait queue. However, we may be concurrently
processing that request in the signaler itself, the actual operations on
the request's node itself are serialised but we do not actually clear the
waiter after removing it from the tree allowing both parties to attempt
to do so and corrupting the rbtree. (Previously removing from the
breadcrumb wait queue could only be done on behalf of i915_wait_request,
so this race could not happen).
Reported-by: N"He, Bo" <bo.he@intel.com>
Fixes: 9eb143bb ("drm/i915: Allow a request to be cancelled")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: "He, Bo" <bo.he@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115121458.24655-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

It is easier to categorize and debug bugs if the failed condition
is in plain sight in the actual dmesg output. Make it so.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMarta Lofstedt <marta.lofstedt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171116083954.3357-1-mika.kuoppala@linux.intel.com

Previously the performance is improved through the workload auditing
and shadowing ahead of vGPU scheduling, however, there is the case that
more requests are allocated in submit_context before the previous request
is added, the timeline will hold its seqno which is later.

This patch is to move the request alloc to dispatch_workload function,
where is the same place as request is added.

It will fix the issue of kernel BUG for (timeline->seqno != request->fence.seqno)
check when add_request.

Fixes: 89ea20b9 ("drm/i915/gvt: Factor out scan and shadow from workload dispatch")
Signed-off-by: NChuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Nfred gao <fred.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Currently every vgpu share a common gvt opregion memory, but
it is freed at vgpu destroy, then the later vgpu doesn't have
opregion memory once the first vgpu is destroyed. This cause
guest function failure like reboot, second or later boot.

This patch allocate and init virt opregion memory for each
vgpu, so this memory could be freed at vgpu destroy.
Signed-off-by: NXiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

mmio_read_from_hw() let vgpu could read hw reg, if vgpu's workload
is running on hw, things is good. Otherwise vgpu will get other
vgpu's reg val, it is unsafe.

This patch limit such hw access to active vgpu. If vgpu isn't
running on hw, the reg read of this vgpu will get the last active
val which saved at schedule_out.

v2: ring timestamp is walking continuously even if the ring is idle.
    so read hw directly. (Zhenyu)
Signed-off-by: NXiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

This reverts commit b20d09886fd1b74cd2255d846029a049e524db14.

This caused windows driver boot errors for invalid page address.
Revert for now.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Our vGPU doesn't have a device ROM, we need follow the PCI spec to
report this info to drivers. Otherwise, we would see below errors.

Inspecting possible rom at 0xfe049000 (vd=8086:1912 bdf=00:10.0)
qemu-system-x86_64: vfio-pci: Cannot read device rom at 00000000-0000-0000-0000-000000000001
Device option ROM contents are probably invalid (check dmesg).
Skip option ROM probe with rombar=0, or load from file with romfile=No option rom signature (got 4860)

I will also send a improvement patch to PCI subsystem related to PCI ROM.
But no idea to omit below error, since no pattern to detect vbios shadow
without touch its content.
0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

gvt_vgpu_err means something goes wrong. We need the error propagates to
kernel message by default.
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

I have seen the cmd parser dump partial odd info. Stop that and only dump
the full verbose info when debug enabled.
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Use I915_WRITE_FW instead of I915_WRITE to reduce overhead.
The overall mmio switch latency lowers from ~600us to ~180us.
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

This new debugfs entry is used to figure out which registers of vGPU
is different to host. It is a useful tool for new platform enabling
and debugging. When read this entry, all the diff mmio are recognized
and sorted by mmio offset. Besides, the bit positions of different
value are listed in 'Diff' column. Here is a show:

$ sudo cat ./mmio_diff
Offset   HW       vGPU     Diff
00002030 000025f8 00000000 3-8,10,13
00002034 012025f8 00000000 3-8,10,13,21,24
00002038 027fb000 00000000 12-13,15-22,25
0000203c 00003000 00000000 12-13
00002054 0000000a 00000040 1,3,6
00002074 012025f8 00000000 3-8,10,13,21,24
00002080 fffe6000 00000000 13-14,17-31
000020a8 fffffeff ffffffff 8
000020d4 00000004 00000000 2
....
00145974 eb42718c 010c11b0 2-5,13-14,17-19,22,25,27,29-31
00145978 0000002f 0000002a 0,2
0014597c 0000002f 0000002a 0,2
00145980 0000002b 00000028 0-1
00145984 a5a87c9e b27d20c0 1-4,6,10-12,14,16,18,20,22-26,28
001459c0 88390000 883c0000 16,18
00146200 88350000 883a0000 16-19
Total: 72432, Diff: 901

v3: fix a typo.
v2: add mmio_hw_access_pre/post().
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

This patch add a function intel_gvt_for_each_tracked_mmio() to
iterate each tracked mmio. The caller don't be aware of how the
tracked mmios are presented internally.

v2: remove snapshot_hw_mmio_registers().
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

this is an enhanced opregion emulation for win guest support
by initializing more data members including opregion header
size, version and child device propertity for display port.
for simplicity, redefined child_device_config structure.
Signed-off-by: NXiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

The engine provides a mirror of the CSB and CSB write pointer in the HWSP.
Read these status from virtual HWSP in VM can reduce CPU utilization while
applications have much more short GPU workloads. Here we update the
corresponding data in virtual HWSP as it in virtual MMIO.

Before read these status from HWSP in GVT-g VM, please ensure the host
support it by checking the BIT(3) of caps in PVINFO.

Virtual HWSP only support GEN8+ platform, since the HWSP MMIO may change
follow the platform update, please add the corresponding MMIO emulation
when enable new platforms in GVT-g.

v3 : Add address audit in HWSP address update.

v4 :
     Separate this patch with enalbe virtual HWSP in VM.
     Use intel_gvt_render_mmio_to_ring_id() to determine ring_id by offset.

v5 : Remove unnessary check about Gen8, GVT-g only support Gen8+.
Signed-off-by: NWeinan Li <weinan.z.li@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Refine previously broken PPGTT scratch. Scratch PTE was no correctly
handled and also the handling of scratch entries in page table walk was
not well organized, which brings gaps of introducing lazy shadow.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

We need ops->set_present() during generating a new scratch page table
entry.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Need to figure out page table type of current level by GTT entry type
during getting a scratch page table entry.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

During a vGPU reset, the scratch page table shouldn't be cleared, what
needs to be cleared should be the scratch page.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

As we want to re-use intel_vgpu_shadow_page in buidling scrach page table
and we don't want to put scrach page table page into hash table, a new
param is introduced to give the caller a choice to decide if a shadow page
should be put into hash table.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

As there is already an I915_GTT_PAGE_SIZE marco in i915, let GVT-g use it
as well. Also this patch re-names some GTT marcos with additional prefix.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Since many emulation logic needs to convert the offset of ring registers
into ring id, we export it for other caller which might need it.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

As the data structure of "intel_vgpu_guest_page" will become much heavier
in future, it's better to factor out the guest memory page track mechnisim
as early as possible.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

1) Use standard i915 GEM object sequence to access the shadow batch buffer.
2) Manage i915 vma life cycle to solve one FIXME.

v2:
- Refine code structure.
- Refine the usage of GEM APIs.
- Add the missing lock/unlock in release_shadow_batch_buffer.

Test on my SKL NuC.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Returns the error code if something is wrong and the size of batch buffer
is passed through the pointer.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>