Current Hardware events and Hardware cache events have special perf
types, PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE. The two types don't
pass the PMU type in the user interface. For a hybrid system, the perf
subsystem doesn't know which PMU the events belong to. The first capable
PMU will always be assigned to the events. The events never get a chance
to run on the other capable PMUs.

Extend the two types to become PMU aware types. The PMU type ID is
stored at attr.config[63:32].

Add a new PMU capability, PERF_PMU_CAP_EXTENDED_HW_TYPE, to indicate a
PMU which supports the extended PERF_TYPE_HARDWARE and
PERF_TYPE_HW_CACHE.

The PMU type is only required when searching a specific PMU. The PMU
specific codes will only be interested in the 'real' config value, which
is stored in the low 32 bit of the event->attr.config. Update the
event->attr.config in the generic code, so the PMU specific codes don't
need to calculate it separately.

If a user specifies a PMU type, but the PMU doesn't support the extended
type, error out.

If an event cannot be initialized in a PMU specified by a user, error
out immediately. Perf should not try to open it on other PMUs.

The new PMU capability is only set for the X86 hybrid PMUs for now.
Other architectures, e.g., ARM, may need it as well. The support on ARM
may be implemented later separately.
Suggested-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1618237865-33448-22-git-send-email-kan.liang@linux.intel.com

Alder Lake Hybrid system has two different types of core, Golden Cove
core and Gracemont core. The Golden Cove core is registered to
"cpu_core" PMU. The Gracemont core is registered to "cpu_atom" PMU.

The difference between the two PMUs include:
- Number of GP and fixed counters
- Events
- The "cpu_core" PMU supports Topdown metrics.
  The "cpu_atom" PMU supports PEBS-via-PT.

The "cpu_core" PMU is similar to the Sapphire Rapids PMU, but without
PMEM.
The "cpu_atom" PMU is similar to Tremont, but with different events,
event_constraints, extra_regs and number of counters.

The mem-loads AUX event workaround only applies to the Golden Cove core.

Users may disable all CPUs of the same CPU type on the command line or
in the BIOS. For this case, perf still register a PMU for the CPU type
but the CPU mask is 0.

Current caps/pmu_name is usually the microarch codename. Assign the
"alderlake_hybrid" to the caps/pmu_name of both PMUs to indicate the
hybrid Alder Lake microarchitecture.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-21-git-send-email-kan.liang@linux.intel.com

Implement filter_match callback for X86, which check whether an event is
schedulable on the current CPU.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-20-git-send-email-kan.liang@linux.intel.com

The attribute_group for Hybrid PMUs should be different from the
previous
cpu PMU. For example, cpumask is required for a Hybrid PMU. The PMU type
should be included in the event and format attribute.

Add hybrid_attr_update for the Hybrid PMU.
Check the PMU type in is_visible() function. Only display the event or
format for the matched Hybrid PMU.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-19-git-send-email-kan.liang@linux.intel.com

Hybrid PMUs have different events and formats. In theory, Hybrid PMU
specific attributes should be maintained in the dedicated struct
x86_hybrid_pmu, but it wastes space because the events and formats are
similar among Hybrid PMUs.

To reduce duplication, all hybrid PMUs will share a group of attributes
in the following patch. To distinguish an attribute from different
Hybrid PMUs, a PMU aware attribute structure is introduced. A PMU type
is required for the attribute structure. The type is internal usage. It
is not visible in the sysfs API.

Hybrid PMUs may support the same event name, but with different event
encoding, e.g., the mem-loads event on an Atom PMU has different event
encoding from a Core PMU. It brings issue if two attributes are
created for them. Current sysfs_update_group finds an attribute by
searching the attr name (aka event name). If two attributes have the
same event name, the first attribute will be replaced.
To address the issue, only one attribute is created for the event. The
event_str is extended and stores event encodings from all Hybrid PMUs.
Each event encoding is divided by ";". The order of the event encodings
must follow the order of the hybrid PMU index. The event_str is internal
usage as well. When a user wants to show the attribute of a Hybrid PMU,
only the corresponding part of the string is displayed.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-18-git-send-email-kan.liang@linux.intel.com

Different hybrid PMUs have different PMU capabilities and events. Perf
should registers a dedicated PMU for each of them.

To check the X86 event, perf has to go through all possible hybrid pmus.

All the hybrid PMUs are registered at boot time. Before the
registration, add intel_pmu_check_hybrid_pmus() to check and update the
counters information, the event constraints, the extra registers and the
unique capabilities for each hybrid PMUs.

Postpone the display of the PMU information and HW check to
CPU_STARTING, because the boot CPU is the only online CPU in the
init_hw_perf_events(). Perf doesn't know the availability of the other
PMUs. Perf should display the PMU information only if the counters of
the PMU are available.

One type of CPUs may be all offline. For this case, users can still
observe the PMU in /sys/devices, but its CPU mask is 0.

All hybrid PMUs have capability PERF_PMU_CAP_HETEROGENEOUS_CPUS.
The PMU name for hybrid PMUs will be "cpu_XXX", which will be assigned
later in a separated patch.

The PMU type id for the core PMU is still PERF_TYPE_RAW. For the other
hybrid PMUs, the PMU type id is not hard code.

The event->cpu must be compatitable with the supported CPUs of the PMU.
Add a check in the x86_pmu_event_init().

The events in a group must be from the same type of hybrid PMU.
The fake cpuc used in the validation must be from the supported CPU of
the event->pmu.

Perf may not retrieve a valid core type from get_this_hybrid_cpu_type().
For example, ADL may have an alternative configuration. With that
configuration, Perf cannot retrieve the core type from the CPUID leaf
0x1a. Add a platform specific get_hybrid_cpu_type(). If the generic way
fails, invoke the platform specific get_hybrid_cpu_type().
Suggested-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1618237865-33448-17-git-send-email-kan.liang@linux.intel.com

The PMU capabilities are different among hybrid PMUs. Perf should dump
the PMU capabilities information for each hybrid PMU.

Factor out x86_pmu_show_pmu_cap() which shows the PMU capabilities
information. The function will be reused later when registering a
dedicated hybrid PMU.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-16-git-send-email-kan.liang@linux.intel.com

The temporary pmu assignment in event_init is unnecessary.

The assignment was introduced by commit 8113070d ("perf_events:
Add fast-path to the rescheduling code"). At that time, event->pmu is
not assigned yet when initializing an event. The assignment is required.
However, from commit 7e5b2a01 ("perf: provide PMU when initing
events"), the event->pmu is provided before event_init is invoked.
The temporary pmu assignment in event_init should be removed.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-15-git-send-email-kan.liang@linux.intel.com

Each Hybrid PMU has to check and update its own extra registers before
registration.

The intel_pmu_check_extra_regs will be reused later to check the extra
registers of each hybrid PMU.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-14-git-send-email-kan.liang@linux.intel.com

Each Hybrid PMU has to check and update its own event constraints before
registration.

The intel_pmu_check_event_constraints will be reused later to check
the event constraints of each hybrid PMU.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-13-git-send-email-kan.liang@linux.intel.com

Each Hybrid PMU has to check its own number of counters and mask fixed
counters before registration.

The intel_pmu_check_num_counters will be reused later to check the
number of the counters for each hybrid PMU.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-12-git-send-email-kan.liang@linux.intel.com

Different hybrid PMU may have different extra registers, e.g. Core PMU
may have offcore registers, frontend register and ldlat register. Atom
core may only have offcore registers and ldlat register. Each hybrid PMU
should use its own extra_regs.

An Intel Hybrid system should always have extra registers.
Unconditionally allocate shared_regs for Intel Hybrid system.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-11-git-send-email-kan.liang@linux.intel.com

The events are different among hybrid PMUs. Each hybrid PMU should use
its own event constraints.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-10-git-send-email-kan.liang@linux.intel.com

The hardware cache events are different among hybrid PMUs. Each hybrid
PMU should have its own hw cache event table.
Suggested-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1618237865-33448-9-git-send-email-kan.liang@linux.intel.com

The unconstrained value depends on the number of GP and fixed counters.
Each hybrid PMU should use its own unconstrained.
Suggested-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1618237865-33448-8-git-send-email-kan.liang@linux.intel.com

The number of GP and fixed counters are different among hybrid PMUs.
Each hybrid PMU should use its own counter related information.

When handling a certain hybrid PMU, apply the number of counters from
the corresponding hybrid PMU.

When reserving the counters in the initialization of a new event,
reserve all possible counters.

The number of counter recored in the global x86_pmu is for the
architecture counters which are available for all hybrid PMUs. KVM
doesn't support the hybrid PMU yet. Return the number of the
architecture counters for now.

For the functions only available for the old platforms, e.g.,
intel_pmu_drain_pebs_nhm(), nothing is changed.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-7-git-send-email-kan.liang@linux.intel.com

The intel_ctrl is the counter mask of a PMU. The PMU counter information
may be different among hybrid PMUs, each hybrid PMU should use its own
intel_ctrl to check and access the counters.

When handling a certain hybrid PMU, apply the intel_ctrl from the
corresponding hybrid PMU.

When checking the HW existence, apply the PMU and number of counters
from the corresponding hybrid PMU as well. Perf will check the HW
existence for each Hybrid PMU before registration. Expose the
check_hw_exists() for a later patch.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-6-git-send-email-kan.liang@linux.intel.com

Some platforms, e.g. Alder Lake, have hybrid architecture. Although most
PMU capabilities are the same, there are still some unique PMU
capabilities for different hybrid PMUs. Perf should register a dedicated
pmu for each hybrid PMU.

Add a new struct x86_hybrid_pmu, which saves the dedicated pmu and
capabilities for each hybrid PMU.

The architecture MSR, MSR_IA32_PERF_CAPABILITIES, only indicates the
architecture features which are available on all hybrid PMUs. The
architecture features are stored in the global x86_pmu.intel_cap.

For Alder Lake, the model-specific features are perf metrics and
PEBS-via-PT. The corresponding bits of the global x86_pmu.intel_cap
should be 0 for these two features. Perf should not use the global
intel_cap to check the features on a hybrid system.
Add a dedicated intel_cap in the x86_hybrid_pmu to store the
model-specific capabilities. Use the dedicated intel_cap to replace
the global intel_cap for thse two features. The dedicated intel_cap
will be set in the following "Add Alder Lake Hybrid support" patch.

Add is_hybrid() to distinguish a hybrid system. ADL may have an
alternative configuration. With that configuration, the
X86_FEATURE_HYBRID_CPU is not set. Perf cannot rely on the feature bit.
Add a new static_key_false, perf_is_hybrid, to indicate a hybrid system.
It will be assigned in the following "Add Alder Lake Hybrid support"
patch as well.
Suggested-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1618237865-33448-5-git-send-email-kan.liang@linux.intel.com

Some platforms, e.g. Alder Lake, have hybrid architecture. In the same
package, there may be more than one type of CPU. The PMU capabilities
are different among different types of CPU. Perf will register a
dedicated PMU for each type of CPU.

Add a 'pmu' variable in the struct cpu_hw_events to track the dedicated
PMU of the current CPU.

Current x86_get_pmu() use the global 'pmu', which will be broken on a
hybrid platform. Modify it to apply the 'pmu' of the specific CPU.

Initialize the per-CPU 'pmu' variable with the global 'pmu'. There is
nothing changed for the non-hybrid platforms.

The is_x86_event() will be updated in the later patch ("perf/x86:
Register hybrid PMUs") for hybrid platforms. For the non-hybrid
platforms, nothing is changed here.
Suggested-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1618237865-33448-4-git-send-email-kan.liang@linux.intel.com

On processors with Intel Hybrid Technology (i.e., one having more than
one type of CPU in the same package), all CPUs support the same
instruction set and enumerate the same features on CPUID. Thus, all
software can run on any CPU without restrictions. However, there may be
model-specific differences among types of CPUs. For instance, each type
of CPU may support a different number of performance counters. Also,
machine check error banks may be wired differently. Even though most
software will not care about these differences, kernel subsystems
dealing with these differences must know.

Add and expose a new helper function get_this_hybrid_cpu_type() to query
the type of the current hybrid CPU. The function will be used later in
the perf subsystem.

The Intel Software Developer's Manual defines the CPU type as 8-bit
identifier.
Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NTony Luck <tony.luck@intel.com>
Reviewed-by: NLen Brown <len.brown@intel.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1618237865-33448-3-git-send-email-kan.liang@linux.intel.com

Add feature enumeration to identify a processor with Intel Hybrid
Technology: one in which CPUs of more than one type are the same package.
On a hybrid processor, all CPUs support the same homogeneous (i.e.,
symmetric) instruction set. All CPUs enumerate the same features in CPUID.
Thus, software (user space and kernel) can run and migrate to any CPU in
the system as well as utilize any of the enumerated features without any
change or special provisions. The main difference among CPUs in a hybrid
processor are power and performance properties.
Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NTony Luck <tony.luck@intel.com>
Reviewed-by: NLen Brown <len.brown@intel.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1618237865-33448-2-git-send-email-kan.liang@linux.intel.com

dev_attr_show() calls the __uncore_*_show() functions via an indirect
call but their type does not currently match the type of the show()
member in 'struct device_attribute', resulting in a Control Flow
Integrity violation.

$ cat /sys/devices/amd_l3/format/umask
config:8-15

$ dmesg | grep "CFI failure"
[ 1258.174653] CFI failure (target: __uncore_umask_show...):

Update the type in the DEFINE_UNCORE_FORMAT_ATTR macro to match
'struct device_attribute' so that there is no more CFI violation.

Fixes: 06f2c245 ("perf/amd/uncore: Prepare to scale for more attributes that vary per family")
Signed-off-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415001112.3024673-2-nathan@kernel.org

dev_attr_show() calls _iommu_event_show() via an indirect call but
_iommu_event_show()'s type does not currently match the type of the
show() member in 'struct device_attribute', resulting in a Control Flow
Integrity violation.

$ cat /sys/devices/amd_iommu_1/events/mem_dte_hit
csource=0x0a

$ dmesg | grep "CFI failure"
[ 3526.735140] CFI failure (target: _iommu_event_show...):

Change _iommu_event_show() and 'struct amd_iommu_event_desc' to
'struct device_attribute' so that there is no more CFI violation.

Fixes: 7be6296f ("perf/x86/amd: AMD IOMMU Performance Counter PERF uncore PMU implementation")
Signed-off-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415001112.3024673-1-nathan@kernel.org

This patch adds a new software event to count context switches
involving cgroup switches.  So it's counted only if cgroups of
previous and next tasks are different.  Note that it only checks the
cgroups in the perf_event subsystem.  For cgroup v2, it shouldn't
matter anyway.

One can argue that we can do this by using existing sched_switch event
with eBPF.  But some systems might not have eBPF for some reason so
I'd like to add this as a simple way.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210210083327.22726-2-namhyung@kernel.org

In some cases, we need to check more than whether the software event
is enabled.  So split the condition check and the actual event
handling.  This is a preparation for the next change.
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210210083327.22726-1-namhyung@kernel.org

The 'running' variable is only used in the P4 PMU. Current perf sets the
variable in the critical function x86_pmu_start(), which wastes cycles
for everybody not running on P4.

Move cpuc->running into the P4 specific p4_pmu_enable_event().

Add a static per-CPU 'p4_running' variable to replace the 'running'
variable in the struct cpu_hw_events. Saves space for the generic
structure.

The p4_pmu_enable_all() also invokes the p4_pmu_enable_event(), but it
should not set cpuc->running. Factor out __p4_pmu_enable_event() for
p4_pmu_enable_all().
Suggested-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1618410990-21383-1-git-send-email-kan.liang@linux.intel.com

Add kselftest to test that remove_on_exec removes inherited events from
child tasks.
Signed-off-by: NMarco Elver <elver@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-9-elver@google.com

Add a kselftest for testing process-wide perf events with synchronous
SIGTRAP on events (using breakpoints). In particular, we want to test
that changes to the event propagate to all children, and the SIGTRAPs
are in fact synchronously sent to the thread where the event occurred.

Note: The "signal_stress" test case is also added later in the series to
perf tool's built-in tests. The test here is more elaborate in that
respect, which on one hand avoids bloating the perf tool unnecessarily,
but we also benefit from structured tests with TAP-compliant output that
the kselftest framework provides.
Signed-off-by: NMarco Elver <elver@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-8-elver@google.com

Adds bit perf_event_attr::sigtrap, which can be set to cause events to
send SIGTRAP (with si_code TRAP_PERF) to the task where the event
occurred. The primary motivation is to support synchronous signals on
perf events in the task where an event (such as breakpoints) triggered.

To distinguish perf events based on the event type, the type is set in
si_errno. For events that are associated with an address, si_addr is
copied from perf_sample_data.

The new field perf_event_attr::sig_data is copied to si_perf, which
allows user space to disambiguate which event (of the same type)
triggered the signal. For example, user space could encode the relevant
information it cares about in sig_data.

We note that the choice of an opaque u64 provides the simplest and most
flexible option. Alternatives where a reference to some user space data
is passed back suffer from the problem that modification of referenced
data (be it the event fd, or the perf_event_attr) can race with the
signal being delivered (of course, the same caveat applies if user space
decides to store a pointer in sig_data, but the ABI explicitly avoids
prescribing such a design).
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NMarco Elver <elver@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NDmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/lkml/YBv3rAT566k+6zjg@hirez.programming.kicks-ass.net/

Introduces the TRAP_PERF si_code, and associated siginfo_t field
si_perf. These will be used by the perf event subsystem to send signals
(if requested) to the task where an event occurred.
Signed-off-by: NMarco Elver <elver@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Arnd Bergmann <arnd@arndb.de> # asm-generic
Link: https://lkml.kernel.org/r/20210408103605.1676875-6-elver@google.com

Adds bit perf_event_attr::remove_on_exec, to support removing an event
from a task on exec.

This option supports the case where an event is supposed to be
process-wide only, and should not propagate beyond exec, to limit
monitoring to the original process image only.
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NMarco Elver <elver@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-5-elver@google.com

Adds bit perf_event_attr::inherit_thread, to restricting inheriting
events only if the child was cloned with CLONE_THREAD.

This option supports the case where an event is supposed to be
process-wide only (including subthreads), but should not propagate
beyond the current process's shared environment.
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NMarco Elver <elver@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YBvj6eJR%2FDY2TsEB@hirez.programming.kicks-ass.net/

As with other ioctls (such as PERF_EVENT_IOC_{ENABLE,DISABLE}), fix up
handling of PERF_EVENT_IOC_MODIFY_ATTRIBUTES to also apply to children.
Suggested-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NMarco Elver <elver@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Link: https://lkml.kernel.org/r/20210408103605.1676875-3-elver@google.com

Make perf_event_exit_event() more robust, such that we can use it from
other contexts. Specifically the up and coming remove_on_exec.

For this to work we need to address a few issues. Remove_on_exec will
not destroy the entire context, so we cannot rely on TASK_TOMBSTONE to
disable event_function_call() and we thus have to use
perf_remove_from_context().

When using perf_remove_from_context(), there's two races to consider.
The first is against close(), where we can have concurrent tear-down
of the event. The second is against child_list iteration, which should
not find a half baked event.

To address this, teach perf_remove_from_context() to special case
!ctx->is_active and about DETACH_CHILD.

[ elver@google.com: fix racing parent/child exit in sync_child_event(). ]
Signed-off-by: NMarco Elver <elver@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-2-elver@google.com

Turns out, the default setting of attr.aux_watermark to half of the total
buffer size is not very useful, especially with smaller buffers. The
problem is that, after half of the buffer is filled up, the kernel updates
->aux_head and sets up the next "transaction", while observing that
->aux_tail is still zero (as userspace haven't had the chance to update
it), meaning that the trace will have to stop at the end of this second
"transaction". This means, for example, that the second PERF_RECORD_AUX in
every trace comes with TRUNCATED flag set.

Setting attr.aux_watermark to quarter of the buffer gives enough space for
the ->aux_tail update to be observed and prevents the data loss.

The obligatory before/after showcase:

> # perf_before record -e intel_pt//u -m,8 uname
> Linux
> [ perf record: Woken up 6 times to write data ]
> Warning:
> AUX data lost 4 times out of 10!
>
> [ perf record: Captured and wrote 0.099 MB perf.data ]
> # perf record -e intel_pt//u -m,8 uname
> Linux
> [ perf record: Woken up 4 times to write data ]
> [ perf record: Captured and wrote 0.039 MB perf.data ]

The effect is still visible with large workloads and large buffers,
although less pronounced.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210414154955.49603-3-alexander.shishkin@linux.intel.com

Currently, we start allocating AUX pages half the size of the total
requested AUX buffer size, ignoring the attr.aux_watermark setting. This,
in turn, makes intel_pt driver disregard the watermark also, as it uses
page order for its SG (ToPA) configuration.

Now, this can be fixed in the intel_pt PMU driver, but seeing as it's the
only one currently making use of high order allocations, there is no
reason not to fix the allocator instead. This way, any other driver
wishing to add this support would not have to worry about this.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210414154955.49603-2-alexander.shishkin@linux.intel.com

IIO stacks to PMON mapping on Skylake servers is exposed through introduced
early attributes /sys/devices/uncore_iio_<pmu_idx>/dieX, where dieX is a
file which holds "Segment:Root Bus" for PCIe root port which can
be monitored by that IIO PMON block. These sysfs attributes are disabled
for multiple segment topologies except VMD domains which start at 0x10000.
This patch removes the limitation and enables IIO stacks to PMON mapping
for multi-segment Skylake servers by introducing segment-aware
intel_uncore_topology structure and attributing the topology configuration
to the segment in skx_iio_get_topology() function.
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NAlexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NKan Liang <kan.liang@linux.intel.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Tested-by: NKyle Meyer <kyle.meyer@hpe.com>
Link: https://lkml.kernel.org/r/20210323150507.2013-1-alexander.antonov@linux.intel.com

The discovery table provides the generic uncore block information
for the MMIO type of uncore blocks, which is good enough to provide
basic uncore support.

The box control field is composed of the BAR address and box control
offset. When initializing the uncore blocks, perf should ioremap the
address from the box control field.

Implement the generic support for the MMIO type of uncore block.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1616003977-90612-6-git-send-email-kan.liang@linux.intel.com

The discovery table provides the generic uncore block information
for the PCI type of uncore blocks, which is good enough to provide
basic uncore support.

The PCI BUS and DEVFN information can be retrieved from the box control
field. Introduce the uncore_pci_pmus_register() to register all the
PCICFG type of uncore blocks. The old PCI probe/remove way is dropped.

The PCI BUS and DEVFN information are different among dies. Add box_ctls
to store the box control field of each die.

Add a new BUS notifier for the PCI type of uncore block to support the
hotplug. If the device is "hot remove", the corresponding registered PMU
has to be unregistered. Perf cannot locate the PMU by searching a const
pci_device_id table, because the discovery tables don't provide such
information. Introduce uncore_pci_find_dev_pmu_from_types() to search
the whole uncore_pci_uncores for the PMU.

Implement generic support for the PCI type of uncore block.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1616003977-90612-5-git-send-email-kan.liang@linux.intel.com

Perf will use a similar method to the PCI sub driver to register
the PMUs for the PCI type of uncore blocks. The method requires a BUS
notifier to support hotplug. The current BUS notifier cannot be reused,
because it searches a const id_table for the corresponding registered
PMU. The PCI type of uncore blocks in the discovery tables doesn't
provide an id_table.

Factor out uncore_bus_notify() and add the pointer of an id_table as a
parameter. The uncore_bus_notify() will be reused in the following
patch.

The current BUS notifier is only used by the PCI sub driver. Its name is
too generic. Rename it to uncore_pci_sub_notifier, which is specific for
the PCI sub driver.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1616003977-90612-4-git-send-email-kan.liang@linux.intel.com