Merge tag 'omap-cleanup-c-for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8/clock

Convert the OMAP2+ clock code and data to rely on the common
clock framework for internal bookkeeping and the driver API.

Basic test logs for this branch on top of Tony's cleanup-prcm branch
at commit c9d501e5 are here:

http://www.pwsan.com/omap/testlogs/common_clk_devel_3.8_rebase/20121112192516/

However, cleanup-prcm at c9d501e5 does not include some fixes
that are needed for a successful test.  With several reverts,
fixes, and workarounds applied, the following test logs were
obtained:

http://www.pwsan.com/omap/testlogs/TEST_common_clk_devel_3.8_rebase/20121112192300/

which indicate that the series tests cleanly.

N.B. The common clock data addition patches result in many
checkpatch warnings of the form "WARNING: static const char *
array should probably be static const char * const".  However, it
appears that resolving these would require changes to the CCF
itself.  So the resolution of these warnings is being postponed
until that can be coordinated.

These patches result in a ~55KiB increase in runtime kernel memory
usage when booting omap2plus_defconfig kernels.

Conflicts:
	arch/arm/mach-omap2/clock33xx_data.c
	arch/arm/mach-omap2/clock3xxx_data.c
	arch/arm/mach-omap2/clock44xx_data.c

Clean all #ifdef's added to common clock code.  This code is no longer
needed due to migration to the common clock framework.
Signed-off-by: NMike Turquette <mturquette@ti.com>
[paul@pwsan.com: clean up new ifdefs added in clockdomain.c]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Drop the now-obsolete OMAP2420/2430 original OMAP clock data.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>

Clean all #ifdef's added to OMAP2 clock code to make it COMMON clk
ready, not that CONFIG_COMMON_CLK is enabled.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: also drop CONFIG_COMMON_CLK tests around APLL recalc_rate
 functions]
Signed-off-by: NMike Turquette <mturquette@ti.com>
[paul@pwsan.com: remove some ifdefs in mach-omap2/io.c]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Remove all of the code that is compiled when CONFIG_COMMON_CLK=n in the
OMAP3+ DPLL handling code.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Mike Turquette <mturquette@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>

Drop the now-obsolete AM33xx original OMAP clock data.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>

Drop the now-obsolete OMAP3xxx original OMAP clock data.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>

Clean all #ifdef's added to OMAP3 clock code to make it COMMON clk
ready, not that CONFIG_COMMON_CLK is enabled.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>
[paul@pwsan.com: remove some ifdefs in mach-omap2/io.c]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Drop the now-obsolete OMAP44xx original OMAP clock data.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>

Clean all #ifdef's added to OMAP4 clock code to make it COMMON clk
ready, now that CONFIG_COMMON_CLK is enabled.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>
[paul@pwsan.com: remove some ifdefs in mach-omap2/io.c]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Clean all #ifdef's added as part of fixing the clkdm
accesses from hwmod.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Select COMMON_CLK for all OMAP2+ SoCs and switch over to using new
data files for OMAP2/3/4.

The older data files will get removed in subsequent patches.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: move 'select COMMON_CLK' from ARCH_OMAP2PLUS_TYPICAL to
 the per-SoC and per-"arch" Kconfig sections]
[mturquette@ti.com: fixed up #ifdef mismatch in clock.h in previous
  patch which drops that change from this patch]
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

The patch is the output from a python script which converts
from the old OMAP clk format to COMMON clk format using a
JSON parser in between which was developed by Paul Walmsley.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: replace omap2_init_clksel_parent() with
 omap2_clksel_find_parent_index(); reflowed macros; dropped 243x clkdev
 aliases in 242x file; added recalc_rate fn ptrs to APLL clocks;
 fixed some checkpatch warnings]
[mturquette@ti.com: removed deprecated variables from omap24x0_clk_init]
Signed-off-by: NMike Turquette <mturquette@ti.com>
[paul@pwsan.com: fixed boot crash due to missing clock init code; added twl.fck
 alias; fix DPLL rate initialization; fix APLL clocks and virt_prcm_set
 initialization]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

The patch is the output from a python script which converts
from the old OMAP clk format to COMMON clk format using a
JSON parser in between which was developed by Paul Walmsley.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: AM3517/05: dropped bogus hsotgusb "ick" and "fck"
 clkdev aliases; added hsotgusb_fck alias; added emac_ick and emac_fck
 aliases; replace omap2_init_clksel_parent() with
 omap2_clksel_find_parent_index(); reflow macros and parent name
 lists; add clkdm_name argument to DEFINE_STRUCT_CLK_HW_OMAP macros]
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

OMAP2/3/4 clock-tree data is migrated to common-clock framework,
so it is needed to do same for AM33XX device.
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
[paul@pwsan.com: replace omap2_init_clksel_parent() with
 omap2_clksel_find_parent_index(); modified to not use the AM33xx common
 clock data yet; updated patch description; reflowed the macros;
 updated DEFINE_STRUCT_CLK_HW_OMAP usage to include clkdm_name]
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

This patch is output from updated omap hw data autogeneration scripts
mostly contributed by Mike Turquette, with some later fixes from me.
All data is added into a new cclock44xx_data.c file which will be
switched with clock44xx_data.c file in a later patch.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: replace omap2_init_clksel_parent() with
 omap2_clksel_find_parent_index(); reflowed macros; updated
 DEFINE_STRUCT_CLK_HW_OMAP macro to include clkdm_name;
 use macros for clksel mux+gate clocks; many other fixes]
[mturquette@ti.com: converted DPLL outputs to HSDIVIDER macro; trace_clk_div_ck
 has clkdm ops]
Signed-off-by: NMike Turquette <mturquette@ti.com>
[paul@pwsan.com: fixed the omap-gpmc.fck alias per commit a2e5b90b; fixed
 several checkpatch issues; moved the dpll3xxx.c clockdomain modifications to
 another patch]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Define four convenience macros to be used in the upcoming OMAP2+
common clock framework port.  Although the use of these macros will
make the data somewhat more difficult to read, they significantly reduce
the number of lines in the output patch data.

Most of these were created by Rajendra Nayak and Mike Turquette, as
far as I know.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
[mturquette@ti.com: added DEFINE_CLK_OMAP_HSDIVIDER macro]
Signed-off-by: NMike Turquette <mturquette@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

It's suspected that some of the clockdomain associations with clocks
can be removed from the clock data.  Drop several of these
associations to save diffstat and improve performance.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: removed most of the changes in this patch; modified patch
 description]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>

The OMAP port to the common clk framework[1] resulted in spurious WARNs
while disable unused clocks.  This is due to _clkdm_clk_hwmod_disable
catching clkdm->usecount's with a value of zero.  Even less desirable it
would not allow the clkdm_clk_disable function pointer to get called due
to an early return of -ERANGE.

This patch adds a check for such a corner case by skipping the WARN and
early return in the event that clkdm->usecount and clk->enable_usecount
are both zero.  Presumably this could only happen during the check for
unused clocks at boot-time.

[1] http://article.gmane.org/gmane.linux.ports.arm.omap/88824Signed-off-by: NMike Turquette <mturquette@ti.com>
[paul@pwsan.com: split the hwmod and clock disable cases; modified the
 code to skip the clockdomain handling during the disable-unused-clocks phase;
 added COMMON_CLK ifdef; removed include of clk-private.h at Mike's request]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Without this kernel would crash, since clkdm inside omap_hwmod
is accessed in some of the init functions like, _init_main_clk.

So call init_clkdm before _init_main_clk().
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Platform code can use omap2_clk_enable_init_clocks() to enable a
list of clocks that are needed to be enabled at init.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>
[paul@pwsan.com: added kerneldoc to non-trivial new function]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Platforms can call omap2_init_clk_hw_omap_clocks() to register a clock
using clk_hw_omap. omap2_clk_enable_autoidle_all() and
omap2_clk_disable_autoidle_all() can then be used to run through
all the clocks which support autoidle to enable/disable them.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>
[paul@pwsan.com: added kerneldoc on non-trivial new functions]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

OMAP2420 and OMAP2430 chips each have two on-chip APLLs.  When locked,
one APLL generates a 96 MHz rate; the other, a 54 MHz rate.
Previously we treated these clocks as fixed-rate clocks at the locked
rates, but this isn't quite right.  The locked rate should be returned
when the APLL is locked, and a zero rate should be returned when the
APLL is stopped.  This patch adds the infrastructure that will be used
by the CCF changes.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>

Convert all OMAP2 specific platform files to use COMMON clk
and keep all the changes under the CONFIG_COMMON_CLK macro check
so it does not break any existing code. At a later point switch
to COMMON clk and get rid of all old/legacy code.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>
[paul@pwsan.com: updated to apply]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Convert all OMAP3 specific platform files to use COMMON clk
and keep all the changes under the CONFIG_COMMON_CLK macro check
so it does not break any existing code. At a later point switch
to COMMON clk and get rid of all old/legacy code.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Convert all OMAP4 specific platform files to use COMMON clk
and keep all the changes under the CONFIG_COMMON_CLK macro check
so it does not break any existing code. At a later point switch
to COMMON clk and get rid of all old/legacy code.

This converts all apis which will be called directly from COMMON
clk to take a struct clk_hw parameter, and all the internal platform
apis to take a struct clk_hw_omap parameter.

Changes are based off the original patch from Mike Turquette.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: created new omap2_clksel_find_parent_index() rather than
 modifying omap2_init_clksel_parent(); moved clkhwops_iclk_wait to
 clkt_iclk.c to fix OMAP4-only builds; added clk-provider.h include to clock.h
 to try to fix some 3430-builds]
[mturquette@ti.com: squash patch for omap2_clkops_{en,dis}able_clkdm;
 omap2_dflt_clk_is_enabled should not enable clocks]
Signed-off-by: NMike Turquette <mturquette@ti.com>
[paul@pwsan.com: fix compiler warning; update to apply; added kerneldoc on
 non-trivial new functions; added the dpll3xxx clockdomain modifications]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

hwmod uses deferencing the clk pointer to acccess the clkdm.
With COMMON clk hwoever this will need to be deferenced through
the clk_hw_omap pointer, so do the necessary changes.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

plat/clock.c which has most of usecounting/locking infrastructure will
be used only for OMAP1 until that is moved to use COMMON clk.

reuse most of what plat/clock.h has while we move to common clk, and
move most of what 'struct clk' was as 'struct clk_hw_omap' which
will then be used to define platform specific parameters.
All usecounting/locking related variables from 'struct clk' are
dropped as they will not be used with 'struct clk_hw_omap'.

Based on the original changes from Mike Turquette.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Merge tag 'omap-cleanup-b2-for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8/cleanup-prcm

Second set of OMAP PRCM cleanups for 3.8.

These patches remove the use of omap_prcm_get_reset_sources() from the
OMAP watchdog driver, and remove mach-omap2/prcm.c and
plat-omap/include/plat/prcm.h.

Basic test logs for this branch on top of Tony's cleanup-prcm branch
at commit 7fc54fd3 are here:

    http://www.pwsan.com/omap/testlogs/prcm_cleanup_b_3.8/20121108151646/

However, cleanup-prcm at 7fc54fd3 does not include some fixes
that are needed for a successful test.  With several reverts,
fixes, and workarounds applied, the following test logs were
obtained:

    http://www.pwsan.com/omap/testlogs/TEST_prcm_cleanup_b_3.8/20121108151930/

 which indicate that the series tests cleanly.

This second pull request updates one of the patches which broke
with rmk's allnoconfigs, and also updates the tag description to
indicate that 7fc54fd3 is building cleanly here.

arch/arm/mach-omap2/prcm.c and arch/arm/plat-omap/include/plat/prcm.h
are now completely unused and can be removed.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>

The hwmod code unconditionally calls _omap4_disable_module() on all
SoCs when a module doesn't enable correctly.  This "worked" due to the
weak function omap4_cminst_wait_module_idle() in
arch/arm/mach-omap2/prcm.c, which was a no-op.  But now those weak
functions are going away - they should not be used.  So this patch
will now call the SoC-specific disable_module code, assuming it
exists.

Needs to be done before the weak function is removed, otherwise AM33xx
will crash early in boot.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>

Consolidate all of the copies of MAX_MODULE_HARDRESET_WAIT and
MAX_MODULE_SOFTRESET_WAIT into one place, arch/arm/mach-omap2/prm.h.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>

Split omap2_set_globals_prcm() into PRM, CM, and PRCM_MPU variants, since
these are all separate IP blocks.  This should make it easier to move the
PRM, CM, PRCM_MPU code into drivers/ in future patchsets.

At this point arch/arm/plat-omap/include/plat/prcm.h is empty; a
subsequent patch will remove it, and remove the #include from all the
files that #include it.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>

Now that all users of mach-omap2/omap2_cm_wait_idlest() have been removed,
delete the function and its supporting macros and prototypes.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>

Convert the OMAP clock code's _omap2_module_wait_ready() to use
SoC-independent CM functions that are provided by the CM code, rather
than using a deprecated function from mach-omap2/prcm.c.

This facilitates the future conversion of the CM code to a driver, and
also removes a mach-omap2/prcm.c user.  mach-omap2/prcm.c will be removed
by a subsequent patch.

Some modules have IDLEST registers that aren't in the CM module, such
as the AM3517 IDLEST bits.  So we also need a fallback function for
these non-CM odd cases.  Create a temporary one in mach-omap2/clock.c,
intended to exist until the SCM drivers are ready.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>

Convert the OMAP2xxx APLL code to use omap2_cm_wait_module_ready(),
and move the low-level CM register manipulation functions to
mach-omap2/cm2xxx.c.  The objectives here are to remove the dependency
on the deprecated omap2_cm_wait_idlest() function in
mach-omap2/prcm.c, so that code can be removed later; and move
low-level register accesses to the CM IP block to the CM code, which
will soon be moved into drivers/.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>

Modify the board files to use the SoC-specific system restart
functions.  At this point it's possible to remove omap_prcm_restart()
from mach-omap2/prcm.c.

While removing the prototypes for the now-unused restart functions, clean
up a few more obsolete prototypes in mach-omap2/clock.h.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>

Split omap_prcm_restart() from mach-omap2/prcm.c into SoC-specific
variants.  These functions need to be able to save the reboot reason
into the scratchpad RAM.  This implies a dependency on both the PRM
and SCM IP blocks, so they've been moved into their own file.  This
will eventually call functions in the PRM and SCM drivers, once those
are created.

Vaibhav Hiremath <hvaibhav@ti.com> identified an unused prototype in
the first version of this patch - now removed.  Tony Lindgren
<tony@atomide.com> noted a compile problem with some RMK Kconfigs;
resolved in this patch.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>
Cc: Tony Lindgren <tony@atomide.com>

Collect all of the virt_prcm_set-specific clocktype code into
mach-omap2/clkt2xxx_virt_prcm_set.c.  Remove its dependency on the
'sclk' and 'vclk' global variables.  Those variables will be removed
by subsequent patches.

This is part of the process of cleaning up the OMAP2xxx clock code
and preparing for the removal of the omap_prcm_restart() function.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>