- 21 12月, 2006 4 次提交
-
-
由 Linus Torvalds 提交于
* 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix register save area alignment for swapcontext syscall [POWERPC] Fix PCI device channel state initialization [POWERPC] Update MTD OF documentation [POWERPC] Probe Efika platform before CHRP. [POWERPC] Fix build of cell zImage.initrd [POWERPC] iSeries: fix CONFIG_VIOPATH dependency [POWERPC] iSeries: fix viocons init [POWERPC] iSeries: fix viocd init [POWERPC] iSeries: fix iseries_veth init [POWERPC] iSeries: fix viotape init [POWERPC] iSeries: fix viodasd init [POWERPC] Workaround oldworld OF bug with IRQs & P2P bridges [POWERPC] powerpc: add scanning of ebc bus to of_platform [POWERPC] spufs: fix assignment of node numbers [POWERPC] cell: Fix spufs with "new style" device-tree [POWERPC] cell: Enable spider workarounds on all PCI buses [POWERPC] cell: add forward struct declarations to spu.h [POWERPC] cell: update cell_defconfig
-
由 Linus Torvalds 提交于
* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Stop defining pci_pretty_name drm: r128: comment aligment with drm git drm: make kernel context switch same as for drm git tree. drm: fixup comment header style drm: savage: compat fix from drm git. drm: Unify radeon offset checking. i915_vblank_tasklet: Try harder to avoid tearing. DRM: handle pci_enable_device failure drm: fix return value check
-
由 Linus Torvalds 提交于
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (30 commits) [ALSA] version 1.0.14rc1 [ALSA] ac97: Identify CMI9761 chips. [ALSA] ac97_codec - trivial fix for bit update functions [ALSA] snd-ca0106: Fix typos. [ALSA] snd-ca0106: Add new card variant. [ALSA] sound: fix PCM substream list [ALSA] sound: initialize rawmidi substream list [ALSA] snd_hda_intel 3stack mode for ASUS P5P-L2 [ALSA] Remove IRQF_DISABLED for shared PCI irqs [ALSA] Fix invalid assignment of PCI revision [ALSA] Fix races in PCM OSS emulation [ALSA] hda-codec - fix typo in PCI IDs [ALSA] ac97 - Fix potential negative array index [ALSA] hda-codec - Verbose proc output for PCM parameters [ALSA] hda-codec - Fix detection of supported sample rates [ALSA] hda-codec - Fix model for ASUS V1j laptop [ALSA] sound/core/control.c: remove dead code [ALSA] hda-codec - Add model for HP q965 [ALSA] pcm core: fix silence_start calculations [ALSA] hda-codec - Fix a typo ...
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (29 commits) [ARM] 4062/1: S3C24XX: Anubis and Osiris shuld have CONFIG_PM_SIMTEC [ARM] 4060/1: update several ARM defconfigs [ARM] 4061/1: xsc3: change of maintainer [ARM] 4059/1: VR1000: fix LED3's platform device number [ARM] 4022/1: iop13xx: generic irq fixups [ARM] 4015/1: s3c2410 cpu ifdefs [ARM] 4057/1: ixp23xx: unconditionally enable hardware coherency [ARM] 4056/1: iop13xx: fix resource.end off-by-one in flash setup [ARM] 4055/1: iop13xx: fix phys_io/io_pg_offst for iq81340mc/sc [ARM] 4054/1: ep93xx: add HWCAP_CRUNCH [ARM] 4052/1: S3C24XX: Fix PM in arch/arm/mach-s3c2410/Kconfig [ARM] Fix warnings from asm/system.h [ARM] 4051/1: S3C24XX: clean includes in S3C2440 and S3C2442 support [ARM] 4050/1: S3C24XX: remove old changelogs in arch/arm/mach-s3c2410 [ARM] 4049/1: S3C24XX: fix sparse warning due to upf_t in regs-serial.h [ARM] 4048/1: S3C24XX: make s3c2410_pm_resume() static [ARM] 4046/1: S3C24XX: fix sparse errors arch/arm/mach-s3c2410 [ARM] 4045/1: S3C24XX: remove old VA for non-shared areas [ARM] 4044/1: S3C24XX: fix sparse warnings in arch/arm/mach-s3c2410/s3c2442-clock.c [ARM] 4043/1: S3C24XX: fix sparse warnings in arch/arm/mach-s3c2410/s3c2440-clock.c ...
-
- 20 12月, 2006 36 次提交
-
-
由 Jaroslav Kysela 提交于
Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James C Georgas 提交于
This patch fixes a couple of bit update functions in alsa-kernel/pci/ac97/ac97_codec.c, which could possibly corrupt bits not in the given mask. Specifically, it'll clobber unset bits in the target that are not in the mask, when the corresponding bit in the given new value is set. Signed-off-by: NJames C Georgas <jgeorgas@rogers.com> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Fixed ALSA bug#2326 Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Akinobu Mita 提交于
If snd_pcm_new_stream() fails to initalize a substream (if snd_pcm_substream_proc_init() returns error), snd_pcm_new_stream() immediately return without unlinking that kfree()d substram. It causes oops when snd_pcm_free() iterates the list of substream to free them by invalid reference. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Akinobu Mita 提交于
If snd_rawmidi_new() failed to allocate substreams for input (snd_rawmidi_alloc_substreams() failed to populate a &rmidi->streams[SNDRV_RAWMIDI_STREAM_INPUT]), it will try to free rawmidi instance by snd_rawmidi_free(). But it will cause oops because snd_rawmidi_free() tries to free both of substreams list but list for output (&rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT]) is not initialized yet. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Nickolay V. Shmyrev 提交于
I have ASUS P5PL2 motherboard and it's embedded sound card requires the following patch which sets '3stack' model to operate properly: 00:1b.0 0403: 8086:27d8 (rev 01) Subsystem: 1043:817f Flags: bus master, fast devsel, latency 0, IRQ 177 Memory at dfdf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Unknown type IRQ 0 Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix IRQ flags for PCI devices. The shared IRQs for PCI devices shouldn't be allocated with IRQF_DISABLED. Also, when MSI is enabled, IRQF_SHARED shouldn't be used. The patch removes unnecessary cast in request_irq and free_irq, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix the type of PCI revision to char from int and avoid invalid assignment with pointer cast. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fixed the race among multiple threads accessing the OSS PCM instance concurrently by simply introducing a mutex for protecting a setup of the PCM. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Christian Hesse 提交于
my notebook is a Samsung X11 of course... The attached patch fixes the typo. Signed-off-by: NChristian Hesse <mail@earthworm.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix the case cidx2 >= 0 and cidx2 < 0 which may result in negative array index. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Make the output for PCM parameters more verbose, showing each rate, bits and format. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Don't include 9.6kHz in the list of supported sample rates. Since this rate isn't indicated in AC_PAR_PCM parameter, the driver might guess wrongly as if it's available. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Add a proper model entry (laptop-eapd) for ASUS V1j laptop with AD1986A codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Adrian Bunk 提交于
This patch removes some obviously dead code spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added a model entry (HP_BPC) for HP q965 with ALC262 codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
The case where silence_size < boundary was broken because different parts of the snd_pcm_playback_silence() function disagreed about whether silence_start should point to the start or to the end of the buffer part to be silenced. This patch changes the code to always use to the start, which also simplifies several calculations. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fixed a typo in proc file. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Remy Bruno 提交于
precise_ptr option causes dysfunction with hdsp driver. Turn it off as default. Signed-off-by: NRemy Bruno <remy.bruno@trinnov.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Some modem codec seem to fail in the initialization, and this stopped loading of the whole module although the audio is OK. Since it's usually a non-fatal issue, the driver tries to proceed to initialize now. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix wrong error checks of *_ch_mode_put() in patch_realtek.c and patch_analog.c. snd_hda_ch_mode_put() could return a positive value for success, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Glen Masgai 提交于
This patch fixes incorrect assignment of swap_rear, which was broken since patch 'ymfpci - make rear channel swap optional' It removes module_param rear_swap. Signed-off-by: NGlen Masgai <mimosius@gmx.de> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
Use the roundup macro instead of manual calculations. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
Use the ALIGN macro instead of manual calculations. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Jaroslav Kysela 提交于
New PCI ID described and tested Spectr <spectr@gmail.com> . Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Jean Delvare 提交于
Don't include <linux/i2c-dev.h> as it's not needed. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Tobias Klauser 提交于
Handle the return value of usb_register() in the module_init function. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Andreas Mohr 提交于
add __devinitdata to struct whitelist, since it's used within a __devinit function. Add const attribute to iterator variable, too. Compile-tested (no section warnings etc.) and run-tested on vt8233, 2.6.18-mm3 (hopefully applies well to current ALSA). Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Paul Mackerras 提交于
For 32-bit processes, the getcontext side of the swapcontext system call (i.e. the saving of the context when the first argument is non-NULL) has to set the ctx->uc_mcontext.uc_regs pointer to the place where it saves the registers. Which it does, but it doesn't ensure that the pointer is 16-byte aligned. 16-byte alignment is needed because the Altivec/VMX registers are saved in there, and they need to be on a 16-byte boundary. This fixes it by ensuring the appropriate alignment of the pointer. This issue was pointed out by Jakub Jelinek. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linas Vepstas 提交于
Initialize the pci device pci channel state. This is critical for having the pci_channel_offline() routine (in pci.h) to function correctly. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Vitaly Wool 提交于
This updates the Documentation/powerpc part of the MTD OF implementation with the new field probe-type. Its support has already been implemented in MTD part (drivers/mtd/maps/physmap_of.c). Signed-off-by: NVitaly Wool <vwool@ru.mvista.com> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Woodhouse 提交于
The Efika matches chrp_probe() too, so put its own probe first to make sure we get it right in a multiplatform build. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
The patch adding support for zImage.ps3 didn't add a zImage.initrd.ps3 target causing builds of zImage.initrd to fail when ps3 is included in the .config. The current method of generating ps3 images doesn't support initrd's yet, so we create a dummy target that only displays a warning message instead. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
This is a long standing typo. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-