all the ih rb control register offsets are cached
at the beginning of ih_sw_init.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NDennis Li <Dennis.Li@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

use vega10_ih_enable_ring to enable all the
available ring buffers for vega10/12, RAVEN
series and RENOIR APUs
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NDennis Li <Dennis.Li@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

replace ih_enable_interrupts and ih_disable_interrupts
with ih_toggle_interrupts
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NDennis Li <Dennis.Li@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Initialize ih control registers offset through helper
function vega10_ih_init_register_offset.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NDennis Li <Dennis.Li@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

vega10_ih_toggle_ring_interrupts will be used to
enable/disable an ih ring interrupts for vega10/12,
RAVEN series and RENOIR APUs
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NDennis Li <Dennis.Li@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

vega10_ih_enable_ring will be used to enable an
ih ring for vega10/12, RAVEN series and RENOIR.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NDennis Li <Dennis.Li@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

vega10_ih_init_register_offset will be used to init
register offset for all the available ih rings
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NDennis Li <Dennis.Li@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

amdgpu_ih_regs holds all the registers for
an ih ring
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NDennis Li <Dennis.Li@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

EDID parsing in S3 resume pushes new display modes
to probed_modes list but doesn't consolidate to actual
mode list. This creates a race condition when
amdgpu_dm_connector_ddc_get_modes() re-initializes the
list head without walking the list and results in  memory leak.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=209987Acked-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This is not a scsi driver.
Reviewed-by: NNirmoy Das <nirmoy.das@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes a crash in drm_object_property_set_value() because the property
is not set for internal DP ports that connect to a bridge chips
(e.g., DP to VGA or DP to LVDS).

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210739
Fixes: 65bf2cf9 ("drm/amdgpu: utilize subconnector property for DP through atombios")
Tested-By: NKris Karas <bugs-a17@moonlit-rail.com>
Cc: Oleg Vasilev <oleg.vasilev@intel.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x

This can suppress the annoying but unharmful prompts.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Add function to identify which MPCC is providing input to a specified OPP
Signed-off-by: NJosip Pavic <Josip.Pavic@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We defer clock updates to after pipes have been programmed. In
some instances we use DPPCLK that have been previously set to be
"unused". This results in a brief window of time where underflow
could occur.

[How]
During prepare bandwidth allow rn_update_clocks_update_dpp_dto
to check each instance and compare previous clock to new clock.
If new clock is higher than previous clock, program DPPDTO.
Signed-off-by: NJake Wang <haonan.wang2@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- restore lvtma_pwrseq_delay2 from vbios integrated info table
- restore MVID/NVID after power up.
- Enable timer wake up mask when enable timer interrupt.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For certain timings, Renoir may underflow due to sr exit  latency
being too slow.

[How]
Updated wm table for renoir.
Signed-off-by: NJake Wang <haonan.wang2@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
DSC should only be acquired per OPP. Therefore, DSC should only
be acquired for the top_pipe when ODM is enabled.
Not doing this check may lead to acquiring more DSC's than needed
when doing MPO + ODM Combine.

[HOW]
Only acquire DSC if pipe is top_pipe.
Signed-off-by: NSung Lee <sung.lee@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
FP2 programming not happening when topology changes occur with multiple
displays.

[How]
Ensure FP2 is programmed whenever global sync changes occur but wait for
VACTIVE first to avoid underflow.
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
new_crtc_state is already dereferenced earlier in the function

[How]
Remove the check
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Virtual signals were previously counted as a workaround to S0i2 hang
which is fixed on Renoir. This blocks S0i3 diags testing.

[HOW]
Stop counting virtual signals as S0i2 hang is fixed on Renoir.
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
there is some garbage showing up during reboot test.
Reason:
SMU might handle display driver msg defered and driver will send
next msg to SMU after 10ms timeout, once SMU FW handle previous msg,
parameters are changed to next one, which result in a wrong value be programmed.

[How]
Extend timeout to 2s so SMU will have enough time to handle driver msg.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Need driver to pass values of backlight ramp start and ramp reduction so
that intensity can be ramped down appropriately.

[How]
Using abm_parameters structure to get these values from driver.
Signed-off-by: NRizvi <syerizvi@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
The sink count change HPD_IRQ will be ignored if the branch device has only
DP DFP.

[how]
To remove the port type restriction.
Signed-off-by: NMartin Tsai <martin.tsai@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Some MST display may not report the internal panel to DEVICE_COUNT,
that makes the check condition always failed.

[how]
To update this condition with the reported device count + 1
(because the immediate repeater's internal panel is possibly
not included in DEVICE_COUNT)
Signed-off-by: NMartin Tsai <martin.tsai@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
HUBP blanking sequence on DCN30 requires us to check if HUBP is in blank
and also toggle HUBP_DISABLE, which should instead be called
HUBP_SOFT_RESET for what it does in HW.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
handler is supposedly passed in as a function pointer;
however, the entire struct amdgpu_dm_irq_handler_data
gets from the list is used to check match.

[how]
use the interrupt_handler within amdgpu_dm_irq_handler_data
for checking match.
Signed-off-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

GUI_IDLE interrupts controlled by CP_INT_CNTL_RING0
are only applicable to me0 pipe0.

For ASICs that have gfx pipe removed, don't toggle
those bits.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The number of crtc should be 0 for ASICs that don't
have display engine. Remove the unnecessary asic type
check then.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check number of gfx ring, rather than asic type,
before cp gfx engine initialization so driver just
need to make sure number of gfx ring is initialized
correctly in gfx early_init phase. No need to add
additional asic type check everywhere when there is
new asic with gfx pipe removed.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is no reserveration so set the size to 0.  Fixes
a regression on SR-IOV.
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only pmfw version behind v4.63.23.00 could support this message.
Signed-off-by: NXiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

GFX10 CP firmware expects PCIe atomics support. Don't enumerate GFX10
devices on platforms (PCIe v2) that don't support PCIe atomics.

Currently, some of the applications like clinfo soft hangs on platforms
without PCIe atomics support.
Signed-off-by: NHarish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add documentation for crc window.

Fixes: c920888c ("drm/amd/display: Expose new CRC window property")
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: NWayne Lin <Wayne.Lin@amd.com>

This makes it easier to debug what block is causing the fault, same as
sienna_cichlid.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NJiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use mode1 reset for dimgrey_cavefish by default.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NJiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some old ASICs might not implement/require get_dig_frontend helper; in
this scenario, we can have a NULL pointer exception when we try to call
it inside vbios disable operation. For example, this situation might
happen when using Polaris12 with an eDP panel. This commit avoids this
situation by adding a specific get_dig_frontend implementation for DCEx.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Chiawen Huang <chiawen.huang@amd.com>
Reported-and-tested-by: NBorislav Petkov <bp@suse.de>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

See Documentation/core-api/printk-formats.rst.
h should no longer be used in the format specifier for printk.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NTom Rix <trix@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

See Documentation/core-api/printk-formats.rst.
h should no longer be used in the format specifier for printk.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NTom Rix <trix@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is a spelling mistake in a comment in the Kconfig. Fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to move the check under the non-headless case, otherwise
we always reserve the VGA save size.

Fixes: 157fe68d ("drm/amdgpu: fix size calculation with stolen vga memory")
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>