CONFIG_EFI_CAPSULE_LOADER allows the user to update the EFI firmware,
which is useful on ARM64 server platforms.
Signed-off-by: NTimur Tabi <timur@codeaurora.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

NVME is non-volatile storage media attached via PCIe. NVME devices
typically have much higher potential throughput than other block
devices, like SATA, NVME is a must-have requirement for ARM64 based
servers.
Signed-off-by: NTimur Tabi <timur@codeaurora.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The CPPC CPUFreq driver is used on many ACPI-based ARM64 server systems.
Signed-off-by: NTimur Tabi <timur@codeaurora.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This patch enable the SPI Communications Controller driver as module for the
Amlogic platform.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

This patch enables the MEDIA Infrared RC Decoders and Meson Infrared
decoder for ARM64 defconfig.
These drivers are selected as modules by default.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
[khilman: make RC_CORE modular too]
Signed-off-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

commit 7fa72cca ("ASoC: rsnd: add HDMI output support")
exchanged Renesas Sound driver's Kconfig selection
from SND_SIMPLE_CARD to SND_SIMPLE_CARD_UTILS, because of this,
defconfig doesn't select SND_SIMPLE_CARD today.
All Renesas platform needs SND_SIMPLE_CARD, Let's select it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

ARCH_BRCMSTB was one of the few platforms that were not enabled by
default, since we are now adding more and more drivers relevant to that
platform get some proper build coverage.
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

ARCH_VULCAN (Broadcom Vulcan) has been discontinued and all its
dependencies have been moved to ARCH_THUNDER2. It can be dropped
from defconfig now.
Signed-off-by: NJayachandran C <jnair@caviumnetworks.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Enable Qualcomm drivers needed to boot Dragonboard 410c with HDMI. This
enables support for clocks, regulators, and USB PHY.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: NRob Herring <robh@kernel.org>
[Olof: Turned off _RPM configs per follow-up email]
Signed-off-by: NOlof Johansson <olof@lixom.net>

Sync the defconfig with savedefconfig as config options change/move over
time.

Generated with the following commands:
make defconfig
make savedefconfig
cp defconfig arch/arm64/configs/defconfig
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The Safexcel EIP197 cryptographic engine is used on some Marvell SoCs,
such as Armada 7040 and Armada 8040. Enable this driver as a module in
the ARM64 defconfig.
Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>

This patch enables the driver for the SDHCI controller found on the
Marvell Armada 3700 and 7K/8K ARM64 SoCs.
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>

Kdump is enabled by default as kexec is.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The arm64 defconfig covers the Allwinner A64 SoC boards quite well,
but USB support is not enabled.
Add the PHY config symbol to allow defconfig kernels to use USB.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

The MVPP2 network driver is used for the ARM64 Marvell Armada 7K and 8K
platforms, so enable it in the arm64 defconfig.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>

Enable drivers specific to Exynos5433 and Exynos7:
1. MFD Low Power Audio SubSystem (LPASS),
2. DRM drivers (DECON display, outputs),
3. Drivers for video-related sub-blocks (JPEG, Multi Format Codec,
   GScaler).
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com>

We need to enable this controller so that we can switch the SD card's
pinmux over to it by default, which will improve storage performance.

Read access (dd with 64k blocks on rpi2):
  CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
  CONFIG_MMC_BCM2835:     19-20 MB/s

Differences on write access are pretty much in the noise.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NEric Anholt <eric@anholt.net>

Now that the Armada 37xx SoCs support the i2c pxa driver, enable it by
default.
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>

Now that the Armada 37xx SoCs support the mvneta driver, enable it by
default. It is especially useful when booting on an NFS root.
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>

This enables the leds-pwm driver to support LEDs which are PWM-powered
(and thus dimmable). Additionally we have to enable the "default-on"
trigger - this was not required before because the gpio-leds driver has
a separate "default-state" property which can be used to enable the LED
by default.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

Enable SH Mobile I2C controller for use on R-Car Gen3 SoCs.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The PMULL based CRC32 implementation already contains code based on the
separate, optional CRC32 instructions to fallback to when operating on
small quantities of data. We can expose these routines directly on systems
that lack the 64x64 PMULL instructions but do implement the CRC32 ones,
which makes the driver that is based solely on those CRC32 instructions
redundant. So remove it.

Note that this aligns arm64 with ARM, whose accelerated CRC32 driver
also combines the CRC32 extension based and the PMULL based versions.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NMatthias Brugger <mbrugger@suse.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This will allow the default kernel build to boot on Cavium ThunderX2
CN99XX processors.
Signed-off-by: NJayachandran C <jnair@caviumnetworks.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Enable the NAND framework and the Denali NAND controller driver.
This NAND controller is used on UniPhier SoCs.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Enable the block layer support for MTD devices.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Enable the Cadence SD/SDIO/eMMC controller.  This is used on
Socionext UniPhier SoC family.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Since much more arm64 SoCs with numa nodes, it's better to enable
NUMA and NUMA_BALANCING to improve the performance on test.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Signed-off-by: NKevin Hilman <khilman@baylibre.com>

This commit enables the XORv2 DMA driver, which is used on the ARM64
Marvell Armada 7K and 8K platforms.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>

The sysfs ABI to GPIO is marked obsolete and should not be
encouraged. Users should be encouraged to switch to using the
character device.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The default value of 17 for CONFIG_LOG_BUF_SHIFT is much more suitable
than 14. The latter easily leads to lost kernel messages on systems with
only one CPU core.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch adds CONFIG_HIBERNATION to the arm64 defconfig.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Enable additional options necessary to boot rk3399-based boards to
boot from either emmc or usb devices, like the arasan sdhci and its phy
as well as the usb2 phy and general rockchip power-domain support.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Many rockchip based arm64 boards use RK808 as PMIC, so
enabe it here let the board bootup normally.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
[added rk808-rtc as module and rk808-clk output built in]
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

I2C and MMC are very basic modules for a board to bootup, as I2C always
used to configure PMIC and MMC devices often used to store filesytem.
So enable them here to let the rockchip based arm64 boards can bootup.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Enable Tegra186 SoC.
Signed-off-by: NJoseph Lo <josephl@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

Given the mimimal hardware support for msm899(2/4) currently.
A few config options are needed to allow for continued
development and booting.

The following are needed for continued development and
booting:
  -8994 pinctrl for serial support
  -Enable Global Glock Controller (gcc)
Signed-off-by: NJeremy McNicoll <jeremymc@redhat.com>
Signed-off-by: NAndy Gross <andy.gross@linaro.org>

Add the thermal driver for bcm2837 to list of compiled modules
in the default config.

Changelog:
 V7 -> V8: rebased
Signed-off-by: NMartin Sperl <kernel@martin.sperl.org>
Signed-off-by: NEric Anholt <eric@anholt.net>