If userspace ignores the POLLERR bit from poll(), and only attempts to
read() the device when POLLIN is set, it can still make ioctl() calls on
a device that has been removed from the system.  The node_id and
generation returned by GET_INFO will be outdated, but INITIATE_BUS_RESET
would still cause a bus reset, and GET_CYCLE_TIMER will return data.
And if you guess the correct generation to use, you can send requests to
a different device on the bus, and get responses back.

This patch prevents open, ioctl, compat_ioctl, and mmap against shutdown
devices.
Signed-off-by: NJay Fenlason <fenlason@redhat.com>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Boaz Harrosh wrote:
> cmd->cmd_len is now guarantied to be set properly at all cases.
> And some commands you want to support will not be set correctly
> by COMMAND_SIZE().
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: remove CVS keywords
  HID: Add iMON LCDs to blacklist
  HID: add Microchip PICKit 1 and PICkit 2 to blacklist
  HID: split Numlock emulation quirk from HID_QUIRK_APPLE_HAS_FN.

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Update defconfigs for desktop/server systems
  [POWERPC] Fix mpc8377_mds.dts DMA nodes to match spec
  [POWERPC] Update arch/powerpc/boot/.gitignore
  [POWERPC] Remove generated files on make clean
  [POWERPC] powerpc/mm/hash_low_32.S: Remove CVS keyword
  [POWERPC] Update Cell MAINTAINERS entry, add spufs entry
  lmb: Fix compile warning

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  [GFS2] Prefer strlcpy() over snprintf()
  [GFS2] Fix cast from unsigned int to s64
  [GFS2] filesystem consistency error from do_strip

The x86_64 pgd_bad(), pud_bad(), pmd_bad() inlines have differed from
their x86_32 counterparts in a couple of ways: they've been unnecessarily
weak (e.g. letting 0 or 1 count as good), and were typed as unsigned long.
Strengthen them and return int.

The PAE pmd_bad was too weak before, allowing any junk in the upper half;
but got strengthened by the patch correcting its ~PAGE_MASK to ~PTE_MASK.
The PAE pud_bad already said ~PTE_MASK; and since it folds into pgd_bad,
and we don't set the protection bits at that level, it'll do as is.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use PTE_MASK to extract mfn from pte.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Tested-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use ~PTE_MASK to extract the non-pfn parts of the pte (ie, the pte
flags), rather than constructing an ad-hoc mask.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Tested-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

_PAGE_CHG_MASK is defined as the set of bits not updated by
pte_modify(); specifically, the pfn itself, and the Accessed and Dirty
bits (which are updated by hardware).
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Tested-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use PTE_MASK in 3-level pagetables (ie, 32-bit PAE).
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Tested-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Put the definitions of __(VIRTUAL|PHYSICAL)_MASK before their uses.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Tested-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the warning:

include2/asm/pgtable.h: In function `pte_modify':
include2/asm/pgtable.h:290: warning: left shift count >= width of type

On 32-bit PAE the virtual and physical addresses are both 32-bits,
so it ends up evaluating 1<<32.  Do the shift as a 64-bit shift then
cast to the appropriate size.  This should all be done at compile time,
and so have no effect on generated code.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Tested-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Define PTE_MASK so that it contains a meaningful value for all x86
pagetable configurations.  Previously it was defined as a "long" which
means that it was too short to cover a 32-bit PAE pte entry.

It is now defined as a pteval_t, which is an integer type long enough
to contain a full pte (or pmd, pud, pgd).

This fixes an Xorg crash on 32-bit x86 with PAE due to corruption of the
NX bit in mprotect due to the incorrect type/value of PTE_MASK reported
by Hugh Dickins:

  "Yes, thanks Jeremy: I've checked that each stage builds and runs X on
   my boxes here, x86_32 and x86_32+PAE and x86_64.  (So even 1/8 is
   enough to fix the PAT pte_modify issue, though 2/8 then fixes
   compiler warnings.)"
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Tested-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes CVS keywords that weren't updated for a long time
from comments.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The new iMON LCDs from SoundGraph need to be blacklisted from HID in order to
be used by lirc.
Signed-off-by: NDylan R Semler <dylan.semler@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Microchip PICkit 1 and PICKit 2 USB Programmers are USB HID class of device but
they are not real HID device. They are now supported by libusb based programs
like the following programs.

pk2 and pk2cmd Linux port:
	http://home.pacbell.net/theposts/picmicro/
usb_pickit:
	http://tfc.duke.free.fr/pickit.html
usb_pickit original version:
	http://charm.cs.uiuc.edu/users/olawlor/projects/2003/microchip/

Therefore it ispreferred to blacklist them.
Signed-off-by: NXiaofan Chen <xiaofanc@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Since 2.6.25 the HID_QUIRK_APPLE_HAS_FN quirk is enabled even for
non-laptop Apple keyboards of the Aluminium series. The USB version of
these don't need Numlock emulation, like the laptop (and Aluminium
Wireless) do, as they have a proper keypad.

This patch splits the Numlock emulation for Apple keyboards in a
different quirk flag, so that it can be enabled for all the keyboards
but the Aluminium USB ones.

If the Numlock emulation is enabled for Aluminium USB keyboards, the
JKL and UIO keys become the numeric pad, and the rest of the keyboard
is disabled, included the key used to disable Numlock.

Additionally, these keyboard should not have a Numlock at all, as the
Numlock key is instead replaced by the 'Clear' key as usual for Apple
USB keyboards.
Signed-off-by: NDiego 'Flameeyes' Petteno <flameeyes@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* Add dtbImage.*
* Added zImage.holly
* Folded zImage.coff.lds into zImage.*lds
* Removed some unused zImage.<foo> ignores
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

dtbImage.* and several zImage. targets get created but never cleaned up.

Also, moved zImage to the clean-files line associated with all other image
results (was previously duplicated).
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  at91_mci: minor cleanup
  mmc: mmc host test driver
  mmc: Fix omap compile by replacing dev_name with dma_dev_name

Add a MAINTAINERS entry for the myri10ge driver.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'audit.b51' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] list_for_each_rcu must die: audit
  [patch 1/1] audit_send_reply(): fix error-path memory leak
  [PATCH] open sessionid permissions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] return to old errno choice in mkdir() et.al.
  [Patch] fs/binfmt_elf.c: fix wrong return values
  [PATCH] get rid of leak in compat_execve()
  [Patch] fs/binfmt_elf.c: fix a wrong free
  [PATCH] avoid multiplication overflows and signedness issues for max_fds
  [PATCH] dup_fd() part 4 - race fix
  [PATCH] dup_fd() - part 3
  [PATCH] dup_fd() part 2
  [PATCH] dup_fd() fixes, part 1
  [PATCH] take init_files to fs/file.c

* 'for-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx:
  [POWERPC] 4xx: Workaround for CHIP_11 Errata

Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This removes a CVS keyword that wasn't updated for a long time from a
comment.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin SPORTS UART Driver: converting BFIN->BLACKFIN
  Blackfin serial driver: add extra IRQ flag for 8250 serial driver
  8250 Serial Driver: Added support for 8250-class UARTs in HV Sistemas H8606 board
  Blackfin arch: Fix bug - USB fails to build for BF524/BF526
  Blackfin arch: update boards defconfig files
  Blackfin arch: IO Port functions to read/write unalligned memory
  Blackfin arch: enable a choice to provide 4M DMA memory
  Blackfin arch: cleanup the icplb/dcplb multiple hit checks
  Blackfin arch: Add workaround to read edge triggered GPIOs
  Blackfin arch: Sync channel defines with struct dma_register dma_io_base_addr.
  Blackfin arch: Check for Anomaly 05000182
  [Blackfin] arch: rename bf5xx-flash to bfin-async-flash
  [Blackfin] arch: Blackfin checksum annotations

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix up restorer in debug_trap exception return path.
  sh: Make is_valid_bugaddr() more intelligent on nommu.
  sh: use the common ascii hex helpers
  sh: fix sh7785 master clock value
  sh: Fix up thread info pointer in syscall_badsys resume path.
  sh: Fix up optimized SH-4 memcpy on big endian.
  sh: disable initrd defaults in .empty_zero_page.
  sh: display boot params by default on entry.

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (28 commits)
  drivers/ata: trim trailing whitespace
  Fixups to ATA ACPI hotplug
  libata: ignore SIMG4726 config pseudo device
  sata_sil24: don't use NCQ if marvell 4140 PMP is attached
  libata: don't schedule LPM action seperately during probing
  libata: make sure PMP notification is turned off during recovery
  libata: increase PMP register access timeout to 3s
  libata: ignore recovered PHY errors
  libata: kill hotplug related race condition
  libata: move reset freeze/thaw handling into ata_eh_reset()
  libata: reorganize ata_eh_reset() no reset method path
  libata: fix sata_link_hardreset() @online out parameter handling
  sata_promise: other cleanups
  sata_promise: mmio access cleanups
  sata_promise: fix irq clearing buglets
  ata: remove FIT() macro
  sata_mv: ensure empty request queue for FBS-NCQ EH
  sata_mv: cache main_irq_mask register in hpriv
  sata_mv: disregard masked irqs
  sata_mv: fix pmp drives not found
  ...

The MAINTAINERS file entry for the cell platform is outdated,
even the name of the platform changed since the early days
when it was initially submitted.
The SPU file system is now maintained by Jeremy Kerr.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The libata-acpi.c code currently accepts hotplug messages from both the
port and the device. This does not match the behaviour of the bay
driver, and may result in confusion when two hotplug requests are
received for the same device. This patch limits the hotplug notification
to removable ACPI devices, which in turn allows it to use the _STA
method to determine whether the device has been removed or inserted.
On removal, devices are marked as detached. On insertion, a hotplug scan
is started. This should avoid lockups caused by the ata layer attempting
to scan devices which have been removed. The uevent sending is moved
outside the spinlock in order to avoid a warning generated by it firing
when interrupts are disabled.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

I was hoping ATA_HORKAGE_NODMA | ATA_HORKAGE_SKIP_PM could keep it
happy but no even this doesn't work under certain configurations and
it's not like we can do anything useful with the cofig device anyway.
Replace ATA_HORKAGE_SKIP_PM with ATA_HORKAGE_DISABLE and use it for
the config device.  This makes the device completely ignored by
libata.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

When 4140 PMP is attached to sil24, NCQ commands to fan out port 1 and
2 (0 based) often stall if commands are in progress to other ports.
I've tried a number of things but can't tell what's going on.  It
never happens w/ ahci and reportedly sata_mv which can issue NCQ
commands to multiple devices simultaneously like sil24 does.

Disable NCQ for devices behind 4140 PMP for the time being.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Mark Lord <liml@rtr.ca>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

There's no reason to schedule LPM action after probing is complete
causing another EH iteration.  Just schedule it together with probing
itself.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

PMP notification during reset can make some controllers fail reset
processing and needs to be turned off during resets.  PMP attach and
full-revalidation path did this via sata_pmp_configure() but the quick
revalidation wasn't.  Move the notification disable code right above
fan-out port recovery so that it's always turned off.

This fixes obscure reset failures.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>