Created a driver for PixCir based dual-touch panels, including the one
in the Hanvon tablet.  This is done in a code structure aimed at unifying
support for several existing HID multitouch panels.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NStéphane Chatty <chatty@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

So far the USBLED driver only supports Delcom's "USB Visual Signal
Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The
driver generates virtual files "red", "green", and "blue" under the
device's /sys/ directory, where color values can be read from and
written to.

This patch adds support for Dream Cheeky's "DL100B Webmail Notifier"
(http://www.dreamcheeky.com/webmail-notifier -- available from several
shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL).
This device isn't as pretty as Delcom's, but it's *far* cheaper, and
its 3 LEDs can be set in 32 brightness steps each. The grey envelope
contour can easily be removed, leaving a rather neutral white box (with
a few small holes), which is useful for generic signalling purposes.
Of course, the small circuit board can easily be put into a prettier
case.

The DL100B device pretends to be a HID, but the HID descriptor shows
that it's not overly useful as such (see below). The patch therefore
removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary
commands to usbled.c. The protocol info comes from the developer's
manual that Dream Cheeky kindly provided (815DeveloperManual.pdf).

HID descriptor:

  0: 05 01   Usage Page 'Generic Desktop Controls'
  2: 09 10   Usage 'Reserved'
  4: a1 01   Collection 'Application (mouse, keyboard)'
  6: 05 00           Usage Page 'Undefined'
  8: 19 10           Usage Minimum = 16
 10: 29 11           Usage Maximum = 17
 12: 15 00           Logical Minimum = 0
 14: 25 0f           Logical Maximum = 15
 16: 75 08           Report Size = 8
 18: 95 08           Report Count = 8
 20: 91 02           Output data *var abs lin pref-state null-pos non-vol bit-field
 22: 19 10           Usage Minimum = 16
 24: 29 11           Usage Maximum = 17
 26: 15 00           Logical Minimum = 0
 28: 25 0f           Logical Maximum = 15
 30: 75 08           Report Size = 8
 32: 95 08           Report Count = 8
 34: 81 00           Input data array abs lin pref-state null-pos non-vol bit-field
 36: c0      End Collection
Signed-off-by: NMelchior FRANZ <mfranz@aon.at>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds support for another Wetab device (726b), and grabs it
accordingly in hid-core.

[rydberg@euromail.se: rename and log message changes]
Signed-off-by: NAndy Ross <andy@plausible.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The Samsung NB30 touch has a DWAV dual-touch device. This patch adds
the NB30 to the list of supported devices, and grabs it accordingly in
hid-core.

[rydberg@euromail.se: rename and log message changes]
Signed-off-by: NRichard Nauber <Richard.Nauber@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The Wetab tablet dual-touch controller works the same way as the one
in the Joojoo tablet. This patch adds the Wetab to the list of
supported devices, and grabs it accordingly in hid-core.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Meywa-Denki/Kayac YUREX is a leg-shakes sensor device.
See http://bbu.kayac.com/en/about/ for further information.
This driver support read/write the leg-shakes counter in the device
via a device file /dev/yurex[0-9]*.

[minor coding style cleanups fixed by gregkh]
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This add the product id of the touch screen found on ACER Aspire 5738PZ.  Works
with hid-cando driver.

Signed-off-by: Francois Jaouen<francois.jaouen@laposte.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device generates ABS_Z and ABS_RX events, while it should be
generating ABS_X and ABS_Y instead. Using the MULTI_INPUT quirk solves
this issue.

Reference: https://bugs.launchpad.net/ubuntu/+bug/620609/Signed-off-by: NPierre BAILLY <pierre@substantiel.fr>
Signed-off-by: NAnisse Astier <anisse@astier.eu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds force feedback support for Logitech WingMan RumblePad
gamepads by extending the Logitech Rumblepad 2 force feedback code.
Signed-off-by: NHendrik Iben <Hendrik_Iben@web.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

New VendorsIds/ProductIds using hid-stantum driver.
Signed-off-by: NStantum <software@stantum.com>
Acked-by: NStephane Chatty <chatty@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for Waltop Slim Tablet 12.1 inch by fixing its report descriptor.
This mainly fixes button reporting.

This tablet is also sold as Genius G-Pen F610.
Other possible names of this tablet: VisTablet Original 12", Adesso CyberTablet
Z12, Adesso CT-Z12A, PenPower Tooya Pro, Aiptek Slim 12.1 Inch
Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds the NOGET quirk for AXIS 295 Video Surveillance Joystick
(despite AXIS brand the vendor is actually CH Products). Without the quirk, the
joystick is detected but does not generate any events.
Signed-off-by: NRok Mandeljc <rok.mandeljc@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The following patch adds support for the Logitech Speed Force Wireless gaming
wheel. Originally designed for the WII console. Details on the protocol:

http://wiibrew.org/wiki/Logitech_USB_steering_wheel

This patch relies on previous patch:
"Don't Send Feature Reports on Interrupt Endpoint"

Logitech as produce a very similar wheel for the PS2/PS3, it is expected that
this patch could also support the PS2/PS3 wheel if the USB ID's are added and
(if required) the HID descriptor is modified.
Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Enable fix for their horizontal scroll wheel behaviour, associate
it with B8 hack.
Signed-off-by: NLech Perczak <lech.perczak@multivision.pl>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The following patch instructs usbhid/hid-mosart to handle a new multitouch
controller, built-in by some Asus EeePC T101MT models.
Signed-off-by: NRoland Baum <rba@tr33.de>
Tested-by: NRoland Baum <rba@tr33.de>
Acked-by: NStéphane Chatty <chatty@enac.fr>
CC: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The trackpad speaks a similar, but different, protocol from the magic
mouse. However, only small code tweaks here and there are needed to make
basic multitouch work.

Extra logic is required for single-touch emulation of the touchpad. The
changes made here take the approach that only one finger may emulate the
single pointer when multiple fingers have touched the screen. Once that
finger is raised, all touches must be raised before any further single
touch events can be sent.

Sometimes the magic trackpad sends two distinct touch reports as one big
report. Simply splitting the packet in two and resending them through
magicmouse_raw_event ensures they are handled properly.

I also added myself to the copyright statement.
Signed-off-by: NChase Douglas <chase.douglas@canonical.com>
Acked-by: NMichael Poole <mdpoole@troilus.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for Art Master III tablet of BeiJing HanwangTechnology Co, Ltd.
Signed-off-by: NXing Wei <weixing@hanwang.com.cn>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch add support for Pyra mobile gaming mouse from Roccat.
It provides access to profiles, settings, actual settings etc.
through sysfs attributes.
This driver is conceptual similar to the existing Kone driver.
Userland tools can soon be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for Waltop Media Tablet 14.1 inch by fixing report descriptor.

This tablet is also sold as Genius G-Pen M712 (older version) and M712X
(newer version). Both are supported.

Trust Wide Screen Design Tablet (TB-7300, item no 15358) seems to be the
older version of this tablet (similar to Genius G-Pen M712), and could be
supported as well.
Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add device ID for another variant of this remote control.
Reported-by: NGregor Fuis <gujs.lists@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The Kanvus Note A5 tablet (with USB ID 5543:6001, USB vendor UC_Logic) needs
the HID_QUIRK_MULTI_INPUT in order to work out of the box; otherwise, we get
the usual "cursor stuck at the upper left corner of the screen".
Signed-off-by: NDecio Fonini <fonini@techk.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for Waltop Slim Tablet 5.8 inch and Media Tablet 10.6 inch.

These (and other Waltop) tablets are usually sold by different companies
(such as Genius and Trust) and with different names, but with the same USB
vendor/product IDs.

Slim Tablet 5.8 inch is known to also be sold as Genius G-Pen F350 and Trust
Widescreen Mini Tablet (item no 16485).

Media Tablet 10.6 inch is known to also be sold as Genius G-Pen M609 and
M609X. Of these only the latter is known to be supported.
Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Adds a hid quirk for the chicony multitouch screen found in the Acer
Aspire 1820pt notebook.
Signed-off-by: NDavid Gow <david@ingeniumdigital.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The JooJoo tablet (http://thejoojoo.com/) contains an "eGalax Inc. USB
TouchController", and this patch hooks it up to the egalax-touch driver.
Without the patch we don't get any cursor motion, since it comes through
Z/RX rather than X/Y.

(The egalax-touch driver does not yet generate a correct event sequence
for the "serial" protocol used by this device, though -- see the note
added to the code, which comes from research by Stéphane Chatty.)

Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: NChris Ball <cjb@laptop.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for UC-Logic WP4030U, WP5540U and WP8060U tablets.
These tablets are usually sold by Genius, Trust and possibly others under
different names and in different cases, but with the original USB
vendor/product IDs.

Currently, these tablets are supported by standalone X.org driver WizardPen.
This patch aims to fix them in the kernel and make them supported by the
generic evdev X.org driver. Still, some minor fixes in the X.org driver are
to be made for the full stack support.
Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This reverts commit ed9eac5b. As
reported by Bastien Nocera, the device actually uses a completely
different protocol, so simply adding VID/PID doesn't work and
completely new driver will need to be written.
Reported-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Adds force feedback support for ACRUX USB game controllers.
These devices are mass produced in China by several vendors.
Signed-off-by: NSergei Kolzun <x0r@dv-life.ru>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

These devices report a usage page of type "consumer" and a usage of
"Programmable buttons". They are hence ignored by the hid-input layer.

Force the registration of an input device by using the new quirk type
HID_QUIRK_HIDINPUT_FORCE.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

There is only one extra button for Conceptronic that wasn't yet present.
The button has code 0xffbc0027 and the description is "Toggle between
display ratios". So I picked KEY_MODE for this button.
Signed-off-by: NKees Bakker <kees.bakker@xs4all.nl>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Hmmm. There are still people who have their editor setup with tabwidth 4.
Some of the entries were added with tabwidth 4, and for these people
the lineup looks OK. But in the Linux kernel source we use tabwidth 8.

This patch repairs that whitespace so that the number align properly.
Signed-off-by: NKees Bakker <kees.bakker@xs4all.nl>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The VENDOR_IDs were mostly in alphabetical order, but some of the
newer entries were not added as such. Some entries were added just
at the end, some were added in the middle.

This patch places the entries once again in a properly sorted
order.
Signed-off-by: NKees Bakker <kees.bakker@xs4all.nl>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Patch for linux-2.6.35-rc4 mainline kernel to enable Paul Qureshi's
Retro Adapter [http://keio.dk/retroadapter.html], an open source USB
device which allows controllers and joysticks from classic computers
and consoles to work on modern PCs, to appear as two separate devices
under Linux.
Signed-off-by: NPeter Edwards <samwise@bagshot-row.org>
Acked-by: NPaul Qureshi <retro@world3.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This USB flight yoke needs the NOGET quirk, like most of CH's other
products. This patch adds that.
Signed-off-by: NJonathan Rockway <jon@jrock.us>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch removes the annoying feature of Elecoms BM084 to constantly scroll to the right.
The device can be found at:
http://www.dealextreme.com/details.dx/sku.15402Signed-off-by: NRichard Nauber <Richard.Nauber@gmail.com>
[jkosina@suse.cz: fix build error]
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The device is handled by usbtouchscreen driver.
Signed-off-by: NPetr Štetiar <ynezz@true.cz>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NMicki Balanga <micki@n-trig.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This change adds in the USB product ID for the Gyration
GYR4101US USB media center remote control.  This remote
is similar enough to the other two devices that this driver
can be used without any other changes to get full support
for the remote.
Signed-off-by: NCory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for the multimedia buttons of the Creative Desktop Wireless 6000
keyboard/mouse combo which are not currently handled by the default/samsung HID
driver.
Signed-off-by: NDon Prince <dhprince-devel@yahoo.co.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

A specialised HID driver for the Zydacron Remote Control (usb id: 13ec:0006).

The specialised HID driver adds support for the buttons which are not

currently handled by the default HID driver.
Signed-off-by: NDon Prince <dhprince-devel@yahoo.co.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

A specialised HID driver for the Creative Prodikeys PC-MIDI USB Keyboard.

The Prodikeys PC-MIDI is a multifunction keyboard comprising a qwerty keyboard,
multimedia keys and a touch sensitive musical keyboard.

The specialised HID driver adds full support for the musical keyboard and extra
multimedia keys which are not currently handled by the default HID driver.

The specialised HID driver interfaces with ALSA, and presents the midi keyboard
as a rawmidi device. Sustain duration, octave shifting and the midi output
channel can be read/written form userspace via sysfs.
Signed-off-by: NDon Prince <dhprince-devel@yahoo.co.uk>
ALSA parts:
Acked-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>