- 21 6月, 2008 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue. Blackfin arch: fix typo error in bf548 serial header file
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: sis can't do PMP ata_piix: add TECRA M4 to broken suspend list LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver sata_mv: warn on PIO with multiple DRQs sata_mv: enable async_notify for 60x1 Rev.C0 and higher libata: don't check whether to use DMA or not for no data commands ahci: jmb361 has only one port
-
由 Linus Torvalds 提交于
The inline assembly in drivers/watchdog/hpwdt.c was incredibly broken, and included all the function prologue and epilogue stuff, even though it was itself then inside a C function where the compiler would add its own prologue and epilogue on top of it all. This then just _happened_ to work if you had exactly the right compiler version and exactly the right compiler flags, so that gcc just happened to not create any prologue at all (the gcc-generated epilogue wouldn't matter, since it would never be reached). But the more proper way to fix it is to simply not do this. Move the inline asm to the top level, with no surrounding function at all (the better alternative would be to remove the prologue and make it actually use proper description of the arguments to the inline asm, but that's a bigger change than the one I'm willing to make right now). Tested-by: NS.Çağlar Onur <caglar@pardus.org.tr> Acked-by: NThomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
KAMEZAWA Hiroyuki and Oleg Nesterov point out that since the commit 557ed1fa ("remove ZERO_PAGE") removed the ZERO_PAGE from the VM mappings, any users of get_user_pages() will generally now populate the VM with real empty pages needlessly. We used to get the ZERO_PAGE when we did the "handle_mm_fault()", but since fault handling no longer uses ZERO_PAGE for new anonymous pages, we now need to handle that special case in follow_page() instead. In particular, the removal of ZERO_PAGE effectively removed the core file writing optimization where we would skip writing pages that had not been populated at all, and increased memory pressure a lot by allocating all those useless newly zeroed pages. This reinstates the optimization by making the unmapped PTE case the same as for a non-existent page table, which already did this correctly. While at it, this also fixes the XIP case for follow_page(), where the caller could not differentiate between the case of a page that simply could not be used (because it had no "struct page" associated with it) and a page that just wasn't mapped. We do that by simply returning an error pointer for pages that could not be turned into a "struct page *". The error is arbitrarily picked to be EFAULT, since that was what get_user_pages() already used for the equivalent IO-mapped page case. [ Also removed an impossible test for pte_offset_map_lock() failing: that's not how that function works ] Acked-by: NOleg Nesterov <oleg@tv-sign.ru> Acked-by: NNick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 6月, 2008 26 次提交
-
-
由 Sonic Zhang 提交于
This allows other threads to run when the serial driver polls the CTS PIN in a loop. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Sonic Zhang 提交于
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Dave Airlie 提交于
Commit 62c96b9d ("agp/intel: cleanup some serious whitespace badness") didn't just fix whitespace. It also lost two lines. Noticed by Linus. No more whitespace diffs for me. Signed-off-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6由 Linus Torvalds 提交于
* 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp/intel: cleanup some serious whitespace badness [AGP] intel_agp: Add support for Intel 4 series chipsets [AGP] intel_agp: extra stolen mem size available for IGD_GM chipset agp: more boolean conversions. drivers/char/agp - use bool agp: two-stage page destruction issue agp/via: fixup pci ids
-
由 Dave Airlie 提交于
Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Zhenyu Wang 提交于
Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Zhenyu Wang 提交于
This adds missing stolen memory size detect for IGD_GM, be sure to detect right size as current X intel driver (2.3.2) which has already worked out. Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Tejun Heo 提交于
From: Piter PUNK <piterpunk@slackware.com> SiS AHCIs say they can do PMP but can't and fail detection if SRST w/ pmp==15 is used. Turn off PMP support. tj: added patch description, adapted patch to #upstream-fixes and renamed board_ahci_sis to board_ahci_nopmp. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Dave Airlie 提交于
Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Tejun Heo 提交于
TOSHIBA also used "TECRA M4" in additon to "Tecra M4", add it. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Dooks 提交于
Add HAVE_PATA_PLATFORM to select the pata platform driver to ensure that we do not end up with a long 'depends on' list when other users of this driver turn up. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Mark Lord 提交于
Chip errata sometimes prevents reliable use of PIO commands which involve more than a single DRQ (data request). In normal operation, libata should not generate such PIO commands (uses DMA instead), but they could be sent in via SG_IO from userspace. A full workaround might be to break up such commands into sequences of single DRQ ones, but that's just way too complex for something that doesn't normally happen in real life. So, allow the attempt (it often works, despite the errata), but log the event for reference when somebody screams. Signed-off-by: NMark Lord <mlord@pobox.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Mark Lord 提交于
The early chipsets cannot safely handle Async Notification (AN), but 6041/6081 chip revision "C0" (and newer) can handle it. So allow AN for "C0" and higher. This enables use of hotplug on PMP ports for the 6041/6081 PCI Rev.9 chips. Signed-off-by: NMark Lord <mlord@pobox.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
There's no reason to check whether to use DMA or not for no data commands. Don't do it. While at it, make local variable using_pio in atapi_xlat() set iff ATAPI_PROT_PIO is going to be used and rename ata_check_atapi_dma() to atapi_check_dma() for consistency. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
JMB361 has only one port but reports it has two causing longish probe failure on the second one. Quirk it. Reported by Gajo Petrovic in bz 10911. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Gajo Petrovic <gajo01@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Joe Perches 提交于
Use boolean in AGP instead of having own TRUE/FALSE -- Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jan Beulich 提交于
besides it apparently being useful only in 2.6.24 (the changes in 2.6.25 really mean that it could be converted back to a single-stage mechanism), I'm seeing an issue in Xen Dom0 kernels, which is caused by the calling of gart_to_virt() in the second stage invocations of the destroy function. I think that besides this being a real issue with Xen (where unmap_page_from_agp() is not just a page table attribute change), this also is invalid from a theoretical perspective: One should not assume that gart_to_virt() is still valid after unmapping a page. So minimally (keeping the 2-stage mechanism) a patch like the one below would be needed. Jan Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Greg KH 提交于
add a new PCI ID and remove an old dodgy one, include the explaination in the commented code so nobody readds later. (davej also sent the pci id addition). Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/uverbs: Fix check of is_closed flag check in ib_uverbs_async_handler() RDMA/nes: Fix off-by-one in nes_reg_user_mr() error path
-
由 Jack Morgenstein 提交于
Commit 1ae5c187 ("IB/uverbs: Don't store struct file * for event files") changed the way that closed files are handled in the uverbs code. However, after the conversion, is_closed flag is checked incorrectly in ib_uverbs_async_handler(). As a result, no async events are ever passed to applications. Found by: Ronni Zimmerman <ronniz@mellanox.co.il> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: Revert "[WATCHDOG] hpwdt: Fix NMI handling." [WATCHDOG] hpwdt: Add CFLAGS to get driver working Revert "[WATCHDOG] make watchdog/hpwdt.c:asminline_call() static"
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] dpt_i2o: Add PROC_IA64 define [SCSI] scsi_host regression: fix scsi host leak [SCSI] sr: fix corrupt CD data after media change and delay
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Clear sub-page HPTE present bits when demoting page size [POWERPC] 4xx: Clear new TLB cache attribute bits in Data Storage vector
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: restore UDFFS_DEBUG to being undefined by default
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits) netlink: genl: fix circular locking Revert "mac80211: Use skb_header_cloned() on TX path." af_unix: fix 'poll for write'/ connected DGRAM sockets tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is set atl1: relax eeprom mac address error check net/enc28j60: low power mode net/enc28j60: section fix sky2: 88E8040T pci device id netxen: download firmware in pci probe netxen: cleanup debug messages netxen: remove global physical_port array netxen: fix portnum for hp mezz cards ibm_newemac: select CRC32 in Kconfig xfrm: fix fragmentation for ipv4 xfrm tunnel netfilter: nf_conntrack_h323: fix module unload crash netfilter: nf_conntrack_h323: fix memory leak in module initialization error path netfilter: nf_nat: fix RCU races atm: [he] send idle cells instead of unassigned when in SDH mode atm: [he] limit queries to the device's register space atm: [br2864] fix routed vcmux support ...
-
由 Wim Van Sebroeck 提交于
The old setup works better. Signed-off-by: NThomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 18 6月, 2008 10 次提交
-
-
由 Paul Mackerras 提交于
When we demote a slice from 64k to 4k, and we are about to insert an HPTE for a 4k subpage and we notice that there is an existing 64k HPTE, we first invalidate that HPTE before inserting the new 4k subpage HPTE. Since the bits that encode which hash bucket the old HPTE was in overlap with the bits that encode which of the 16 subpages have HPTEs, we need to clear out the subpage HPTE-present bits before starting to insert HPTEs for the 4k subpages. If we don't do that, we can erroneously think that a subpage already has an HPTE when it doesn't. That in itself wouldn't be such a problem except that when we go to update the HPTE that we think is present on machines with a hypervisor, the hypervisor can tell us that the HPTE we think is there is actually there even though it isn't, which can lead to a process getting stuck in a loop, continually faulting. The reason for the confusion is that the AVPN (abbreviated virtual page number) we are looking for in the HPTE for a 4k subpage can actually match the AVPN in a stale HPTE for another 64k page. For example, the HPTE for the 4k subpage at 0x84000f000 will be in the same hash bucket and have the same AVPN as the HPTE for the 64k page at 0x8400f0000. This fixes the code to clear out the subpage HPTE-present bits. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Josh Boyer 提交于
A recent commit added support for the new 440x6 and 464 cores that have the added WL1, IL1I, IL1D, IL2I, and ILD2 bits for the caching attributes in the TLBs. The new bits were cleared in the finish_tlb_load function, however a similar bit of code was missed in the DataStorage interrupt vector. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Patrick McHardy 提交于
genetlink has a circular locking dependency when dumping the registered families: - dump start: genl_rcv() : take genl_mutex genl_rcv_msg() : call netlink_dump_start() while holding genl_mutex netlink_dump_start(), netlink_dump() : take nlk->cb_mutex ctrl_dumpfamily() : try to detect this case and not take genl_mutex a second time - dump continuance: netlink_rcv() : call netlink_dump netlink_dump : take nlk->cb_mutex ctrl_dumpfamily() : take genl_mutex Register genl_lock as callback mutex with netlink to fix this. This slightly widens an already existing module unload race, the genl ops used during the dump might go away when the module is unloaded. Thomas Graf is working on a seperate fix for this. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts commit 608961a5. The problem is that the mac80211 stack not only needs to be able to muck with the link-level headers, it also might need to mangle all of the packet data if doing sw wireless encryption. This fixes kernel bugzilla #10903. Thanks to Didier Raboud (for the bugzilla report), Andrew Prince (for bisecting), Johannes Berg (for bringing this bisection analysis to my attention), and Ilpo (for trying to analyze this purely from the TCP side). In 2.6.27 we can take another stab at this, by using something like skb_cow_data() when the TX path of mac80211 ends up with a non-NULL tx->key. The ESP protocol code in the IPSEC stack can be used as a model for implementation. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rainer Weikusat 提交于
The unix_dgram_sendmsg routine implements a (somewhat crude) form of receiver-imposed flow control by comparing the length of the receive queue of the 'peer socket' with the max_ack_backlog value stored in the corresponding sock structure, either blocking the thread which caused the send-routine to be called or returning EAGAIN. This routine is used by both SOCK_DGRAM and SOCK_SEQPACKET sockets. The poll-implementation for these socket types is datagram_poll from core/datagram.c. A socket is deemed to be writeable by this routine when the memory presently consumed by datagrams owned by it is less than the configured socket send buffer size. This is always wrong for connected PF_UNIX non-stream sockets when the abovementioned receive queue is currently considered to be full. 'poll' will then return, indicating that the socket is writeable, but a subsequent write result in EAGAIN, effectively causing an (usual) application to 'poll for writeability by repeated send request with O_NONBLOCK set' until it has consumed its time quantum. The change below uses a suitably modified variant of the datagram_poll routines for both type of PF_UNIX sockets, which tests if the recv-queue of the peer a socket is connected to is presently considered to be 'full' as part of the 'is this socket writeable'-checking code. The socket being polled is additionally put onto the peer_wait wait queue associated with its peer, because the unix_dgram_sendmsg routine does a wake up on this queue after a datagram was received and the 'other wakeup call' is done implicitly as part of skb destruction, meaning, a process blocked in poll because of a full peer receive queue could otherwise sleep forever if no datagram owned by its socket was already sitting on this queue. Among this change is a small (inline) helper routine named 'unix_recvq_full', which consolidates the actual testing code (in three different places) into a single location. Signed-off-by: NRainer Weikusat <rweikusat@mssgmbh.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Ang Way Chuang 提交于
By default, tun.c running in TUN_TUN_DEV mode will set the protocol of packet to IPv4 if TUN_NO_PI is set. My program failed to work when I assumed that the driver will check the first nibble of packet, determine IP version and set the appropriate protocol. Signed-off-by: NAng Way Chuang <wcang@nav6.org> Acked-by: NMax Krasnyansky <maxk@qualcomm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Radu Cristescu 提交于
The atl1 driver tries to determine the MAC address thusly: - If an EEPROM exists, read the MAC address from EEPROM and validate it. - If an EEPROM doesn't exist, try to read a MAC address from SPI flash. - If that fails, try to read a MAC address directly from the MAC Station Address register. - If that fails, assign a random MAC address provided by the kernel. We now have a report of a system fitted with an EEPROM containing all zeros where we expect the MAC address to be, and we currently handle this as an error condition. Turns out, on this system the BIOS writes a valid MAC address to the NIC's MAC Station Address register, but we never try to read it because we return an error when we find the all- zeros address in EEPROM. This patch relaxes the error check and continues looking for a MAC address even if it finds an illegal one in EEPROM. Signed-off-by: NRadu Cristescu <advantis@gmx.net> Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 David Brownell 提交于
Keep enc28j60 chips in low-power mode when they're not in use. At typically 120 mA, these chips run hot even when idle; this low power mode cuts that power usage by a factor of around 100. This version provides a generic routine to poll a register until its masked value equals some value ... e.g. bit set or cleared. It's basically what the previous wait_phy_ready() did, but this version is generalized to support the handshaking needed to enter and exit low power mode. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NClaudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 David Brownell 提交于
Minor bugfixes to the enc28j60 driver ... wrong section marking, indentation, and bogus use of spi_bus_type. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NClaudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-