In order to get rid of bcm_defconfig, enable this driver which is needed
by some Broadcom SoCs based on the Kona architecture to reboot.
Acked-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Acked-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

The BCM7038 watchdog is used by all Broadcom STB SoCs but is not needed
for system reboot, we just turn it on as a module.
Acked-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Enable the Broadcom AHCI driver and its companion PHY driver to get
functional SATA3 support.
Acked-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Enable the required drivers and subsystems to bring-up networking on
Broadcom's Set-top Box SoCs: BCMGENET and SF2. These two drivers both
have proper dependencies on their internal PHY and MDIO drivers.
Acked-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Enable ARCH_BCM_63XX to build ARM-specific boot and SMP code, as well as
the serial console driver for this platform.
Acked-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

This option was replaced by PAGE_COUNTER which is selected by MEMCG.
Signed-off-by: NKonstantin Khlebnikov <koct9i@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 94ea9c7a579f ("lib, switch CONFIG_PRINTK_TIME to int") changes
the type of CONFIG_PRINTK_TIME and adapts all existing defconfig files,
while we add two new defconfig files with d0bc3483 ("arm/configs:
Add Aspeed defconfig"), with the old type.

This changes the two new defconfig files to match the other ones.
As a result, we get harmless warnings for the arm-soc defconfig
branch by itself, but everything will work when 4.7-rc1 is out.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The Ux500 is using buffered IIO as the sensors support
IRQs. The BH1780 ambient light sensor was added to IIO,
so disable the old misc driver and activate the driver
in IIO.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Ux500 was enabling the staging drivers due to the RMI4
touchscreen driver, this is now properly upstream, so drop
this and the dead symbol for the old RMI4 hack from
the defconfig.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

CONFIG_FHANDLE is listed as a mandatory kernel option for systemd. So
explicitly enable it to allow easy use of systemd userspace.
Reported-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Now that all drivers support the same set of functions and the same
setup code, drop every model-specific DSA switch driver and replace them
with a common mv88e6xxx driver.

This merges the info tables into one, removes the function exports, the
model-specific files, and update the defconfigs.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoel Stanley <joel@jms.id.au>

This adds the Aspeed ast2400 BMC SoC to the build.

The SoC has six UARTs so we need to enable the appropriate options for
SERIAL_8250
Signed-off-by: NJoel Stanley <joel@jms.id.au>

Enable CGROUPS support, so we can boot userspace that uses systemd on
top of kernel configured using this defconfig. The systemd userspace
depends on cgroups and without them, it dies in mysterious ways.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

The driver for Micrel PHYs is required for the Apalis iMX6 module
plugged into a Ixora carrier board featuring an on-module Micrel
KSZ9031 Gigabit PHY.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The GPIO-based bitbanging I2C driver is required to make HDMI work on
the Apalis iMX6 module plugged into a Ixora carrier board featuring a
DDC channel to read a screen's EDID being hooked up to regular GPIOs.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable the XUSB pad controller and XUSB controller (implementing an XHCI
interface) in the multi_v7 default configuration.

The XUSB pad controller is built-in because it is needed by PCIe, which
in turn provides the onboard ethernet used for network boot on a Jetson
TK1.
Signed-off-by: NThierry Reding <treding@nvidia.com>

Enable the XUSB pad controller and XUSB controller (implementing an XHCI
interface) in the Tegra default configuration.
Signed-off-by: NThierry Reding <treding@nvidia.com>

These are available on n900.
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add the new sama5d2-compatible ADC driver as a module.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add the Atmel Pulse Density Modulation Interface Controller (PDMIC) driver
as a module. It's used by sama5d2 SoC for instance.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add the Atmel Image Sensor Interface (ISI) VIDEO driver as a module.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add both Atmel watchdog timers to the multi_v7_defconfig. They are added
as part of the kernel because it's a core piece of the system.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add the HLCDC drivers to multi_v7_defconfig.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add Pulse Density Modulation Interface Controller (PDMIC) driver compilation
for sama5 default configuration. Is used by sama5d2 SoC for instance.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Add the LCD DRM driver with all its dependencies:
- the MFD driver
- the backlight PWM
- the simple panel driver

Remove the CONFIG_FB as it is not needed on any sama5 device.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Selection of the HDMAC option is now needed to allow some sama5 devices
to have the DMA driver compiled and available.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

This is in use on omap4 boards.
Signed-off-by: NTony Lindgren <tony@atomide.com>

Commit 648af7fc ("rxrpc: Absorb the rxkad security module") changed
the RXKAD Kconfig symbol from tristate to boolean but the commit didn't
update the omap2plus_defconfig that was enabling CONFIG_RXKAD as module.

This leads to the following warning when using the omap2plus_defconfig:

arch/arm/configs/omap2plus_defconfig:112:warning: symbol value 'm' invalid for RXKAD
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This patch adds a new config for MPS2 platform.
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>

This NAND controller device is used on UniPhier SoCs (and I know
it is also used on SoC FPGA).
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Enable SPI driver and SPI NOR flash support as modules.

Tested with SPI NOR flash on DA850-EVM.  Basic boot test only to confirm
NOR flash device detection.
Signed-off-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

CONFIG_FHANDLE is required by systemd[1], which is the
default init system in more and more distributions.
So lets enable it for DaVinci platforms as well.

While at it, remove stale entry CONFIG_INOTIFY=y

[1] https://github.com/systemd/systemd/blob/master/README#L37Acked-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

It appears that Gen2 is a misnomer for the R-Car PCIE driver
which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2
from the help text and Kconfig symbol.

Also, re-arange the Kconfig symbol name to use PCIE as the prefix.
This appears to be in keeping with other PCIE Kconfig symbols.
Reported-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>

The change enables build of ARM PrimeCell PL17x driver for LPC32xx
platform, the memory controller is commonly used to interface NOR
flash drives.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>

The change is a result of "make lpc32xx_defconfig; make savedefconfig"
run, a number of config options are removed:

  CONFIG_BINFMT_AOUT=y   -- not needed, legacy
  CONFIG_FPE_NWFPE=y     -- not needed, AEABI build
  CONFIG_IPV6_PRIVACY=y  -- removed build option
  CONFIG_IPV6=y          -- selected by default
  CONFIG_MII=y           -- not needed, board phys don't select library
  CONFIG_MTD_CHAR=y      -- removed build option
  CONFIG_MTD_M25P80=y    -- not needed, AT25 EEPROM driver is in use
  CONFIG_USB_PHY=y       -- selected by default
Acked-by: NSylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>

This enables the new driver for Marvell CESA crypto engines on all mvebu v5.
The old driver is no longer used, but it is still in the tree for fallback.
Signed-off-by: NRomain Perier <romain.perier@free-electrons.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>

This enables the new driver for Marvell CESA crypto engines on all ARMv7.
Signed-off-by: NRomain Perier <romain.perier@free-electrons.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>