That will use a synthetic evlist with just what is touched by this new
method to check that it works as expected.

Output in verbose mode:

  $ perf test -v pollfd
  33: Filter fds with revents mask in a pollfd array         :
  --- start ---
  filtering all but pollfd[2]:
  before:   5 [ 5, 4, 3, 2, 1 ]
   after:   1 [ 3 ]
  filtering all but (pollfd[0], pollfd[3]):
  before:   5 [ 5, 4, 3, 2, 1 ]
   after:   2 [ 5, 2 ]
  test child finished with 0
  ---- end ----
  Filter fds with revents mask in a pollfd array: Ok
  $
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-x7c8liszdvc3ocmanf2cet8p@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This allows default config terms to be provided for a PMU. So, for
example, when the Intel PT PMU is added, it will be possible to specify:

	intel_pt//

which will be the same as:

	intel_pt/tsc=1,noretcomp=0/

meaning that the trace should contain TSC timestamps and perform 'return
compression'.

An important consideration of this patch is that it must be possible to
overwrite the default values.  That has meant changing the logic so that
a zero value can replace a non-zero value.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a test that checks that sched_switch events and tracking events can
be recorded for a workload using the evsel->system_wide and
evsel->tracking flags (respectively) with other events sometimes enabled
or disabled.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1408129739-17368-2-git-send-email-adrian.hunter@intel.com
[ Fix build on fedora14 by using a designated initializer for the sched_switch variable ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Use strerror_r instead of strerror in error messages for thread-safety.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140814022245.3545.91394.stgit@kbuild-fedora.novalocalSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently vmlinux_path__init() only tries to find vmlinux file from
current directory, /boot and some canonical directories with version
number of the running kernel.  This can be a problem when reporting old
data recorded on a kernel version not running currently.

We can use --symfs option for this but it's annoying for user to do it
always.  As we already have the info in the perf.data file, it can be
changed to use it for the search automatically.

Before:

  $ perf report
  ...
  # Samples: 4K of event 'cpu-clock'
  # Event count (approx.): 1067250000
  #
  # Overhead  Command     Shared Object      Symbol
  # ........  ..........  .................  ..............................
      71.87%     swapper  [kernel.kallsyms]  [k] recover_probed_instruction

After:

  # Overhead  Command     Shared Object      Symbol
  # ........  ..........  .................  ....................
      71.87%     swapper  [kernel.kallsyms]  [k] native_safe_halt

This requires to change signature of symbol__init() to receive struct
perf_session_env *.
Reported-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Move the rdtsc() function so it can be reusued.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406035081-14301-24-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We not support PERF_FLAG_FD_CLOEXEC flag, updating attr tests
accordingly.

Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-2mgzn5p9u74drmdmxo5unar0@git.kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

In commit a21b0b35 ('perf: Introduce a flag to enable
close-on-exec in perf_event_open()'), flag PERF_FLAG_FD_CLOEXEC
was added to perf_event_open(2) syscall to allows userspace
to atomically enable close-on-exec behavor when creating
the file descriptor.

This patch makes perf tools use the new flag if supported
by the kernel, so that the event file descriptors got
automatically closed if perf tool exec a sub-command.
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/1404160127-7475-1-git-send-email-ydroneaud@opteya.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

It is possible to record a perf.data file on one architecture and
process it on another.

Consequently, TSC conversion functions need to be moved out of the arch
directory.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-40-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving pr_* debug macros to have it with in same object as debug
variables, becase we will change them to use verbose variable in next
patch.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1405374411-29012-3-git-send-email-jolsa@kernel.org
[ Add missing debug.h include in python scripting glue and in the libdw unwind lib ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Testing that perf properly closes opened dso objects
and tries to reopen in case we run out of allowed file
descriptors for dso data.
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1401892622-30848-14-git-send-email-jolsa@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Adding test that setup test_dso_data__fd_limit and test
dso data file descriptors are cached appropriately.
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-13-git-send-email-jolsa@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Making the test_file function to be reusable for
new tests coming in following patches.

Also changing the template name of temp files to
"/tmp/perf-test-XXXXXX" to easily identify & blame.
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-12-git-send-email-jolsa@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

In upcoming tests we will setup process limits, which
might affect other tests. Spawning child for each test
to prevent this.
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1401892622-30848-11-git-send-email-jolsa@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Before:

  [acme@zoo linux]$ make -C tools/perf -f tests/make make_static
  make: Entering directory `/home/git/linux/tools/perf'
  - make_static: cd . && make -f Makefile DESTDIR=/tmp/tmp.JcWuM4Zu9f LDFLAGS=-static
  make: *** [make_static] Error 1
  make: Leaving directory `/home/git/linux/tools/perf'
  [acme@zoo linux]$

After:

  [acme@zoo linux]$ make -C tools/perf -f tests/make make_static
  make: Entering directory `/home/git/linux/tools/perf'
  - make_static: cd . && make -f Makefile DESTDIR=/tmp/tmp.X3su83i14u LDFLAGS=-static
  cd . && make -f Makefile DESTDIR=/tmp/tmp.X3su83i14u LDFLAGS=-static
    BUILD:   Doing 'make -j4' parallel build
  config/Makefile:303: *** No static glibc found, please install glibc-static.  Stop.
  make[1]: *** [all] Error 2
    test: test -x ./perf
  make: Leaving directory `/home/git/linux/tools/perf'
  [acme@zoo linux]$

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-h4kby5wyp6nfev3882rzm3r9@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This reverts commit 3090ffb5.

Re-enable the mmap2 interface as we will have a user soon.

Since things have changed since perf disabled mmap2, small tweaks
to the revert had to be done:

o commit 9d4ecc88 forced (n!=8) to become (n<7)
o a new libunwind test needed updating to use mmap2 interface
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/1401461382-209586-1-git-send-email-dzickus@redhat.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Now it adds a new testcase to verify --children option working
correctly.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-28-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

In various histogram test cases, fake symbols are used as raw numbers.
Define macros for each pid, map, symbols so that it can increase
readability somewhat.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-27-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The new ->add_entry_cb() will be called after an entry was added to
the histogram.  It's used for code sharing between perf report and
perf top.  Note that ops->add_*_entry() should set iter->he properly
in order to call the ->add_entry_cb.

Also pass @arg to the callback function.  It'll be used by perf top
later.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/87k393g999.fsf@sejong.aot.lge.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

To support callchain accumulation, @entry should be recognized if it's
accumulated or not when add_hist_entry() called.  The period of an
accumulated entry should be added to ->stat_acc but not ->stat. Add
@sample_self arg for that.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-5-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

There're some duplicate code when adding hist entries.  They are
different in that some have branch info or mem info but generally do
same thing.  So introduce new struct hist_entry_iter and add callbacks
to customize each case in general way.

The new perf_evsel__add_entry() function will look like:

  iter->prepare_entry();
  iter->add_single_entry();

  while (iter->next_entry())
    iter->add_next_entry();

  iter->finish_entry();

This will help further work like the cumulative callchain patchset.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1401335910-16832-3-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

There're some duplicate code for counting number of samples.  Add
hists__inc_nr_samples() and reuse it.
Suggested-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1401335910-16832-2-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

With new output fields option, its internal implementation was changed
so add a new testcase to verify whether it breaks things.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-21-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Those print helper functions can be reused by later hist test cases so
factor them out to a common location.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-20-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Adding dwarf unwind test, that setups live machine data over
the perf test thread and does the remote unwind.

Need to use -fno-optimize-sibling-calls for test compilation,
otherwise 'krava_*' function calls are optimized into jumps
and omitted from the stack unwind.

So far it was enabled only for x86.
Signed-off-by: NJean Pihet <jean.pihet@linaro.org>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1400229672-16104-3-git-send-email-jean.pihet@linaro.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

trace_sched_wakeup(.success) is a dead argument and has been for ages,
the only reason its still there is because of brain dead software, which
apparently includes perf tools

There's a few more instances in pearly snake shit, but that's not
supported as far as I care anyhow, so let that bitrot.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140512181946.GG13467@laptop.programming.kicks-ass.netSigned-off-by: NJiri Olsa <jolsa@kernel.org>

I believe that passing pid (instead of tid) as the 3rd arg of the
machine__find*_thread() was to find a main thread so that it can
search proper map group for symbols.  However with the map sharing
patch applied, it now can do it in any thread.

It fixes a bug when each thread has different name, it only reports a
main thread for samples in other threads.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1399856202-26221-1-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Combine all definitions into a common tools/include/linux/types.h and
kill the wild growth elsewhere. Move DECLARE_BITMAP to its proper
bitmap.h header.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/n/tip-azczs7qcv6h9xek9od10hiv2@git.kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Adding test for building static perf build into the automated
suite. Also available via following commands:

  $ make -f tests/make make_static
  - make_static: cd . && make -f Makefile DESTDIR=/tmp/tmp.7u5MlB4njo LDFLAGS=-static
  $ make -f tests/make make_static_O
  - make_static_O: cd . && make -f Makefile O=/tmp/tmp.Ay6r3wEmtX DESTDIR=/tmp/tmp.vK0KQwO0Vi LDFLAGS=-static
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398760413-7574-1-git-send-email-jolsa@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Add a s390 specific test of a hardcoded trace event with '-'
in the name.
Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1398440047-6641-4-git-send-email-yarygin@linux.vnet.ibm.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

In tests/parse-events.c test cases are declared in evlist_test[]
arrays. Elements of arrays are initialized in following pattern:
	[i] = {
 		.name  = ...,
 		.check = ...,
 	},

When perf-test is running with '-v' option, 'i' variable will be
printed for every existing test.

However, we can't add any arch specific tests inside #ifdefs, because it
will create collision between the element number inside #ifdef and the
next one outside.

This patch adds 'id' field in evlist_test, uses it as a test
identifier and removes explicit numbering of array elements. This helps
to number tests with gaps.
Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1398440047-6641-3-git-send-email-yarygin@linux.vnet.ibm.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

This test create 2 processes abstractions, with several threads
and checks they properly share and maintain map groups info.
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1397490723-1992-6-git-send-email-jolsa@redhat.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Adding automated test for memory maps lookup within multiple machines
threads.

The test creates 4 threads and separated memory maps. It checks that we
could use thread__find_addr_map function with thread object based on TID
to find memory maps.
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1397490723-1992-2-git-send-email-jolsa@redhat.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Now we have changed how hists stats are accounted especially when
filter(s) applied.  So add a test case to verify it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1398396494-12811-2-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The fake_setup_machine() is for setting up a environment for testing
various hists operations. As it'll be used for other test cases it'd
better factoring it out.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1398396494-12811-1-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

perf_evlist__delete() deletes attached cpu and thread maps
but the test is still using them, so remove them from the
evlist before deleting it.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/53465E3E.8070201@intel.comSigned-off-by: NJiri Olsa <jolsa@redhat.com>

Now that we can properly synthesize threads system-wide, make sure the
mmap and mmap2 events use tids instead of pids to locate their maps.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1393429527-167840-3-git-send-email-dzickus@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Forcing the code to always search thread by pid/tid pair.

The PID value will be needed in future to determine the process thread
leader for map groups sharing.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1394805606-25883-3-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding make test for NO_LIBDW_DWARF_UNWIND option, plus updating minimal
build test with it.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-7-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding pmu-bison.o make test:

  $ make -f tests/make make_util_pmu_bison_o
  - make_util_pmu_bison_o: cd . && make -f Makefile DESTDIR=/tmp/tmp.0u99hQn8Ga util/pmu-bison.o
  $ make -f tests/make make_util_pmu_bison_o_O
  - make_util_pmu_bison_o_O: cd . && make -f Makefile O=/tmp/tmp.sWKDLGS71O DESTDIR=/tmp/tmp.htQNJAfJ0d util/pmu-bison.o
  make: *** [make_util_pmu_bison_o_O] Error 1

The 'O=' version of the test is failing at the moment, due to the OUTPUT
directory issue fixed in next patch.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392805300-14610-2-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>