This is used by TTM to communicate the physical address
which should be used with ioremap(), ioremap_wc(). We don't
need to separate the base and offset in any way here.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389457/

This is internal to TTM and should not be used by drivers directly.

Drop the call to qxl_ttm_io_mem_reserve() and use mem->start instead.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389456/

This fixes the following warnings while building in W=1 :
dw-mipi-dsi.c:1002:5: warning: no previous prototype for 'dw_mipi_dsi_debugfs_write' [-Wmissing-prototypes]
dw-mipi-dsi.c:1027:5: warning: no previous prototype for 'dw_mipi_dsi_debugfs_show' [-Wmissing-prototypes]

Fixes: e2435d69 ("drm/bridge: dw-mipi-dsi.c: Add VPG runtime config through debugfs")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Angelo Ribeiro <angelo.ribeiro@synopsys.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907102711.23748-1-narmstrong@baylibre.com

This patch implements the necessary functions to add writeback support
for vkms. This feature is useful for testing compositors if you don't
have hardware with writeback support.

Change in V4 (Emil and Melissa):
- Move signal completion above drm_crtc_add_crc_entry()
- Make writeback always available
- Use appropriate namespace
- Drop fb check in vkms_wb_atomic_commit
- Make vkms_set_composer visible for writeback code
- Enable composer operation on prepare_job and disable it on cleanup_job
- Drop extra space at the end of the file
- Rebase

Change in V3 (Daniel):
- If writeback is enabled, compose everything into the writeback buffer
instead of CRC private buffer
- Guarantees that the CRC will match exactly what we have in the
writeback buffer.

Change in V2:
- Rework signal completion (Brian)
- Integrates writeback with active_planes (Daniel)
- Compose cursor (Daniel)
Signed-off-by: NRodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: NLiviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200830142000.146706-4-rodrigosiqueiramelo@gmail.com

This commit decouples pixel manipulation from compute_crc() for avoiding
any pixel change during the CRC calculation. This commits represents a
preparation work for making VKMS able to support the writeback feature.

Change in V5 (Melissa):
- Rebase and drop bitmap for alpha
Change in V4 (Emil):
- Move bitmap_clear operation and comments to get_pixel function
Signed-off-by: NRodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: NMelissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200830142000.146706-3-rodrigosiqueiramelo@gmail.com

In the vkms_composer.c, some of the functions related to CRC and compose
have interdependence between each other. This patch reworks some
functions inside vkms_composer to make crc and composer computation
decoupled.

This patch is preparation work for making vkms able to support new
features.
Tested-by: NMelissa Wen <melissa.srw@gmail.com>
Signed-off-by: NRodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: NMelissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200830142000.146706-2-rodrigosiqueiramelo@gmail.com

I want to split this structure up and use it differently,
step one remove bdev pointer from it and pass it explicitly.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826014428.828392-4-airlied@gmail.com

The BCM2711 has a reworked display pipeline, and the load tracker needs
some adjustment to operate properly. Let's add a compatible for BCM2711
and disable the load tracker until properly supported.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/beac4f9ef0261bca731a0402c8354e9af740519c.1599120059.git-series.maxime@cerno.tech

The BCM2711 comes with a new VideoCore. Add a compatible for it.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NRob Herring <robh+dt@kernel.org>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1075091c50b378505a9a89f760af11f0e1e26e5b.1599120059.git-series.maxime@cerno.tech

The HDMI controllers found in the BCM2711 SoC need some adjustments to the
bindings, especially since the registers have been shuffled around in more
register ranges.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Reviewed-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ecd686e9b2335275bfb1ccfe1878305367b34bf3.1599120059.git-series.maxime@cerno.tech

Now that the driver is ready for it, let's bring in the HDMI controllers
variants for the BCM2711.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b540c7a9ebb7ad51da39271a8388b69c7e27e582.1599120059.git-series.maxime@cerno.tech

The BCM2711 has another clock that needs to be ramped up depending on the
pixel rate: the pixel BVB clock. Add the code to adjust that clock when
changing the mode.

[Maxime: Changed the commit log, used clk_set_min_rate]
Signed-off-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20200901040759.29992-3-hoegeun.kwon@samsung.com
Link: https://patchwork.freedesktop.org/patch/msgid/d757ddd6549da140f178563e5fd2bf1d129913fd.1599120059.git-series.maxime@cerno.tech

In order to avoid pixels getting stuck in an unflushable FIFO, we need when
we disable the HDMI controller to switch away from getting our pixels from
the pixelvalve and instead use blank pixels, and switch back to the
pixelvalve when we enable the HDMI controller.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fde3efb1ad79f4476a73d310cbba3ec07dc6dabe.1599120059.git-series.maxime@cerno.tech

The VID_CTL setup is done in several places in the driver even though it's
not really required. Let's simplify it a bit to do the configuration in one
go.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/08e7ebb605a560fcc149b69b4af52753a7870b2f.1599120059.git-series.maxime@cerno.tech

In order to prevent some pixels getting stuck in an unflushable FIFO on
bcm2711, we need to enable the HVS, the pixelvalve (the CRTC) and the HDMI
controller (the encoder) in an intertwined way, and with tight delays.

However, the atomic callbacks don't really provide a way to work with
either constraints, so we need to roll our own callbacks so that we can
provide those guarantees.

Since those callbacks have been implemented and called in the CRTC code, we
can just implement them in the HDMI driver now.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2e9226d971117065f3b97e597f04f7fe2f0c134c.1599120059.git-series.maxime@cerno.tech

In order to avoid a pixel getting stuck in an unflushable FIFO, we need to
recenter the FIFO every time we're doing a modeset and not only if we're
connected to an HDMI monitor.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b3faaf05ac6c4d3c364d28fa441571eb85903269.1599120059.git-series.maxime@cerno.tech

The current code has some logic, disabled by default, to dump the register
setup in the HDMI controller.

However, since we're going to split those functions in multiple, shorter,
functions that only make sense where they are called in sequence, keeping
the register dump makes little sense.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c8c8d388f2d32fc3536336be36d003a862487eb7.1599120059.git-series.maxime@cerno.tech

The HDMI driver was registering a single ALSA card so far with the name
vc4-hdmi.

Obviously, this is not going to work anymore when we will have multiple
HDMI controllers since we will end up trying to register two files with the
same name.

Let's use the variant to avoid that name conflict.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e60a37444e848a384a45707a21d6df8883115f86.1599120059.git-series.maxime@cerno.tech

The audio configuration has changed for the BCM2711, with notably a
different parent clock and a different channel configuration.

Make that modular to be able to support the BCM2711.
Signed-off-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/85a8ca721c2d800be758c55870cea98536749680.1599120059.git-series.maxime@cerno.tech

ALSA's iec958 plugin by default sets the block start preamble
to 8, whilst this driver was programming the hardware to expect
0xF.
Amend the hardware config to match ALSA.
Signed-off-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0b126deb228baf1244c91e02ac0a8f7c9c60dc5.1599120059.git-series.maxime@cerno.tech

If the encoder is disabled and re-enabled (eg mode change) all infoframes
are reset, whilst the audio subsystem know nothing about this change.
The driver therefore needs to reinstate the audio infoframe for
itself.
Signed-off-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cd579ccc2c9b9d2fce0ebaf32f847cedb0e4a7a2.1599120059.git-series.maxime@cerno.tech

The register range used for audio setup in the previous generations of
SoC were always the second range in the device tree. However, now that
the BCM2711 has way more register ranges, it makes sense to retrieve it
by names for it, while preserving the id-based lookup as a fallback.
Signed-off-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a1ba5605fe1006a1ead5262ef3d66ea5d0750381.1599120059.git-series.maxime@cerno.tech

The HSM clock needs to be running at 101% the pixel clock of the HDMI
controller, however it's shared between the two HDMI controllers, which
means that if the resolutions are different between the two HDMI
controllers, and the lowest resolution is on the second (in enable order)
controller, the first HDMI controller will end up with a smaller than
expected clock rate.

Since we don't really need an exact frequency there, we can simply change
the minimum rate we expect instead.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/821992209cc0d7a83254bf26fe2bf507ef0994d2.1599120059.git-series.maxime@cerno.tech

The HSM clock needs to be setup at around 101% of the pixel rate. This
was done previously by setting the clock rate to 163.7MHz at probe time and
only check in mode_valid whether the mode pixel clock was under the pixel
clock +1% or not.

However, with 4k we need to change that frequency to a higher frequency
than 163.7MHz, and yet want to have the lowest clock as possible to have a
decent power saving.

Let's change that logic a bit by setting the clock rate of the HSM clock
to the pixel rate at encoder_enable time. This would work for the
BCM2711 that support 4k resolutions and has a clock that can provide it,
but we still have to take care of a 4k panel plugged on a BCM283x SoCs
that wouldn't be able to use those modes, so let's define the limit in
the variant.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7e692ddc231d33dd671e70ea04dd1dcf56c1ecb3.1599120059.git-series.maxime@cerno.tech

The mode_valid hook on the encoder uses a pointer to a drm_encoder called
crtc, which is pretty confusing. Let's rename it to encoder to make it
clear what it is.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7fbabab03992efe4a3a3640ac5ee2bb49b1c7338.1599120059.git-series.maxime@cerno.tech

The CEC_CLOCK_DIV define is not used anywhere in the driver, let's remove
it.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/53805cc47e99a137e5f08c92fb781cc2e2134299.1599120059.git-series.maxime@cerno.tech

Similarly to the audio support, CEC support is not there yet for the
BCM2711, so let's skip entirely the CEC initialization through a variant
flag.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bd0c4afa83b4e121692352cdc2dd1886162c7552.1599120059.git-series.maxime@cerno.tech

The CEC init code was put directly into the bind function, which was quite
inconsistent with how the audio support was done, and would prevent us from
further changes to skip that initialisation entirely.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/21f4717e076291522d0784a7fd3774d8e97eaf01.1599120059.git-series.maxime@cerno.tech

The HDMI driver was registering a single debugfs file so far with the name
hdmi_regs.

Obviously, this is not going to work anymore when will have multiple HDMI
controllers since we will end up trying to register two files with the same
name.

Let's use the variant to avoid that name conflict.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9505c1eb40b3ef3709277bf9e8af77917b249c32.1599120059.git-series.maxime@cerno.tech

The vc4 CRTC will use the encoder type to control its output clock
muxing. However, this will be different from HDMI0 to HDMI1, so let's
store our type in the variant structure so that we can support multiple
controllers later on.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2736a86b498551ba9dbc5803c5bb910627a2550c.1599120059.git-series.maxime@cerno.tech

Similarly to the previous patches, the timings setup in the HDMI controller
of the BCM2711 is slightly different, mostly because it supports higher
resolutions and thus needed more spaces for the various timings, resulting
in the register layout changing.

Let's add a callback for that as well.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0cfcbb379212f90b4abc76c0ccf3b90d1d7c0268.1599120059.git-series.maxime@cerno.tech

Similarly to the previous patches, the CSC setup is slightly different in
the BCM2711 than in the previous generations. Let's add a callback for it.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c19bbf10153cb42ca0fb67e08606c8295c17236.1599120059.git-series.maxime@cerno.tech

Let's continue the implementation of hooks for the parts that change in the
BCM2711 SoC with the PHY RNG setup.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/216155f1c0b83e622ac60a2f7d00eb707de3acba.1599120059.git-series.maxime@cerno.tech

The HDMI PHY in the BCM2711 HDMI controller is significantly more
complicated to setup than in the older BCM283x SoCs.

Let's add hooks to enable and disable the PHY.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7216826284dbc60a58bdacd662805d20699e5c80.1599120059.git-series.maxime@cerno.tech

The BCM2711 and BCM283x HDMI controllers use a slightly different reset
sequence, so let's add a callback to reset the controller.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a34bcb493da07eae58ed704f65e72ce0748e8952.1599120059.git-series.maxime@cerno.tech

The HDMI controllers found in the BCM2711 have most of the registers
reorganized in multiple registers areas and at different offsets than
previously found.

The logic however remains pretty much the same, so it doesn't really make
sense to create a whole new driver and we should share the code as much as
possible.

Let's implement some indirection to wrap around a register and depending on
the variant will lookup the associated register on that particular variant.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3070236daff920e7edd11c5a72ac31fd0f6a656b.1599120059.git-series.maxime@cerno.tech

The HDMI controllers found in the BCM2711 has a pretty different clock and
registers areas than found in the older BCM283x SoCs.

Let's create a variant structure to store the various adjustments we'll
need later on, and a function to get the resources needed for one
particular version.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/71cfa3ce3d865bbab52a0e5651bc052dc4893f11.1599120059.git-series.maxime@cerno.tech

The vc4_hdmi_connector was only used to switch between drm_connector to
drm_encoder. However, we can now use vc4_hdmi to do the switch, so that
structure is redundant.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/aee5120728db350b19c074de4290eafaf01e6671.1599120059.git-series.maxime@cerno.tech

Now that we don't have any users anymore, we can kill that pointer.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/d7ebf50319bbd902e4b7b7c39ae1612c3b38e6b2.1599120059.git-series.maxime@cerno.tech

The unbind function needs to retrieve a vc4_hdmi structure pointer through
the struct device that we're given since we want to support multiple HDMI
controllers.

However, our optional ASoC support doesn't make that trivial since it will
overwrite the device drvdata if we use it, but obviously won't if we don't
use it.

Let's make sure the fields are at the proper offset to be able to cast
between the snd_soc_card structure and the vc4_hdmi structure
transparently so we can support both cases.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/717082cba06b5c06280f26c56c08aee512365ed3.1599120059.git-series.maxime@cerno.tech