This patch adds support for STBC encoding to the radiotap tx parse
function. Prior to this change adding the STBC flag to the radiotap
header did not encode frames with STBC.
Signed-off-by: NPhilipp Borgers <borgers@mi.fu-berlin.de>
Link: https://lore.kernel.org/r/20210125150744.83065-1-borgers@mi.fu-berlin.de
[use u8_get_bits/u32_encode_bits instead of manually shifting]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This was added to mitigate the effects of too much sampling on devices that
use a static global fallback table instead of configurable multi-rate retry.
Now that the sampling algorithm is improved, this code path no longer performs
any better than the standard probing on affected devices.
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-6-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This makes it easier to see what rates are going to be tested next
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-5-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The biggest flaw in current minstrel_ht is the fact that it needs way too
many probing packets to be able to quickly find the best rate.
Depending on the wifi hardware and operating mode, this can significantly
reduce throughput when not operating at the highest available data rate.

In order to be able to significantly reduce the amount of rate sampling,
we need a much smarter selection of probing rates.

The new approach introduced by this patch maintains a limited set of
available rates to be tested during a statistics window.

They are split into distinct categories:
- MINSTREL_SAMPLE_TYPE_INC - incremental rate upgrade:
  Pick the next rate group and find the first rate that is faster than
  the current max. throughput rate
- MINSTREL_SAMPLE_TYPE_JUMP - random testing of higher rates:
  Pick a random rate from the next group that is faster than the current
  max throughput rate. This allows faster adaptation when the link changes
  significantly
- MINSTREL_SAMPLE_TYPE_SLOW - test a rate between max_prob, max_tp2 and
  max_tp in order to reduce the gap between them

In order to prioritize sampling, every 6 attempts are split into 3x INC,
2x JUMP, 1x SLOW.

Available rates are checked and refilled on every stats window update.

With this approach, we finally get a very small delta in throughput when
comparing setting the optimal data rate as a fixed rate vs normal rate
control operation.
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-4-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

In order to more gracefully be able to fall back to lower rates without too
much throughput fluctuations, initialize all untested rates below tested ones
to the maximum probabilty of higher rates.
Usually this leads to untested lower rates getting initialized with a
probability value of 100%, making them better candidates for fallback without
having to rely on random probing
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-3-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Keep the update in one place and prepare for further rework
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-2-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Get rid of a lot of divisions and modulo operations
Reduces code size and improves performance
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-1-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Sparse started warning on this function because we can potentially
return an uninitialized value.  The reason is that if the caller
passes a min_bw value that is higher then the last value in bws[], we
will not go into the loop and reg_rule will remain initialized.  This
cannot happen because the only caller of this function uses either 1
or 20 in min_bw, but the function will be more robust if we
pre-initialize the value.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210204154439.6c884ea7281c.I257278d03b0c1ae0aa6631672cfa48f1a95d5996@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The multiplication of the u32 variables tx_time and estimated_retx is
performed using a 32 bit multiplication and the result is stored in
a u64 result. This has a potential u32 overflow issue, so avoid this
by casting tx_time to a u64 to force a 64 bit multiply.

Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 050ac52c ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210205175352.208841-1-colin.king@canonical.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch unifies sending control port frames
over nl80211 and AF_PACKET sockets a little more.

Before this patch, EAPOL frames got QoS prioritization
only when using AF_PACKET sockets.

__ieee80211_select_queue only selects a QoS-enabled queue
for control port frames, when the control port protocol
is set correctly on the skb. For the AF_PACKET path this
works, but the nl80211 path used ETH_P_802_3.

Another check for injected frames in wme.c then prevented
the QoS TID to be copied in the frame.

In order to fix this, get rid of the frame injection marking
for nl80211 ctrl port and set the correct ethernet protocol.

Please note:
An erlier version of this path tried to prevent
frame aggregation for control port frames in order to speed up
the initial connection setup a little. This seemed to cause
issues on my older Intel dvm-based hardware, and was therefore
removed again. Future commits which try to reintroduce this
have to check carefully how hw behaves with aggregated and
non-aggregated traffic for the same TID.
My NIC: Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NMarkus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20210206115112.567881-1-markus.theil@tu-ilmenau.deSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The ieee80211 class registers a callback which actually does nothing.
Given that the callback is optional, and all its accesses are protected
by a NULL check, remove it entirely.
Signed-off-by: NMatteo Croce <mcroce@microsoft.com>
Link: https://lore.kernel.org/r/20210208113356.4105-1-mcroce@linux.microsoft.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Explicitly define reserved field and require it and any subsequent
fields to be zero-valued for now. Additionally, limit the valid CMSG
flags that tcp_zerocopy_receive accepts.

Fixes: 7eeba170 ("tcp: Add receive timestamp support for receive zerocopy.")
Signed-off-by: NArjun Roy <arjunroy@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Suggested-by: NDavid Ahern <dsahern@gmail.com>
Suggested-by: NLeon Romanovsky <leon@kernel.org>
Suggested-by: NJakub Kicinski <kuba@kernel.org>
Acked-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cleaning up tx descriptors first increases the chance that
rtl_rx() can allocate new skb's from the cache.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dev_ifsioc_locked() is called with only RCU read lock, so when
there is a parallel writer changing the mac address, it could
get a partially updated mac address, as shown below:

Thread 1			Thread 2
// eth_commit_mac_addr_change()
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
				// dev_ifsioc_locked()
				memcpy(ifr->ifr_hwaddr.sa_data,
					dev->dev_addr,...);

Close this race condition by guarding them with a RW semaphore,
like netdev_get_name(). We can not use seqlock here as it does not
allow blocking. The writers already take RTNL anyway, so this does
not affect the slow path. To avoid bothering existing
dev_set_mac_address() callers in drivers, introduce a new wrapper
just for user-facing callers on ioctl and rtnetlink paths.

Note, bonding also changes slave mac addresses but that requires
a separate patch due to the complexity of bonding code.

Fixes: 3710becf ("net: RCU locking for simple ioctl()")
Reported-by: N"Gong, Sishuai" <sishuai@purdue.edu>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The condition should be skipped if CPU ID equal to nthreads.
The patch doesn't fix any actual issue since
nthreads = min_t(unsigned int, num_present_cpus(), MVPP2_MAX_THREADS).
On all current Armada platforms, the number of CPU's is
less than MVPP2_MAX_THREADS.

Fixes: e531f767 ("net: mvpp2: handle cases where more CPUs are available than s/w threads")
Reported-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NStefan Chulski <stefanc@marvell.com>
Reviewed-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vignesh Raghavendra says:

====================
net: ti: am65-cpsw-nuss: Add switchdev driver

This series adds switchdev support for AM65 CPSW NUSS driver to support
multi port CPSW present on J721e and AM64 SoCs.
It adds devlink hook to switch b/w switch mode and multi mac mode.

v2:
Rebased on latest net-next
Update patch 1/4 with rationale for using devlink
====================

J721e, J7200 and AM64 have multi port switches which can work in multi
mac mode and in switch mode. Add documentation explaining how to use
different modes.

Borrowed from:
Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst
Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

J721e, J7200 and AM64 have multi port switches which can work in multi
mac mode and in switch mode. Add support for configuring this HW in
switch mode using devlink and switchdev notifiers.

Support is similar to existing CPSW switchdev implementation of TI's 32 bit
platform like AM33/AM43/AM57.

To enable switch mode:
devlink dev param set platform/8000000.ethernet name switch_mode value true cmode runtime

All configuration is implemented via switchdev API and notifiers.
Supported:
      - SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS
      - SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS
      - SWITCHDEV_ATTR_ID_PORT_STP_STATE
      - SWITCHDEV_OBJ_ID_PORT_VLAN
      - SWITCHDEV_OBJ_ID_PORT_MDB
      - SWITCHDEV_OBJ_ID_HOST_MDB

Hence AM65 CPSW switchdev driver supports:
     - FDB offloading
     - MDB offloading
     - VLAN filtering and offloading
     - STP
Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Register netdevice notifiers in order to receive notification when
individual MAC ports are added to the HW bridge.
Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

AM65 NUSS ethernet switch on K3 devices can be configured to work either
in independent mac mode where each port acts as independent network
interface (multi mac) or switch mode.

Add devlink hooks to provide a way to switch b/w these modes.

Rationale to use devlink instead of defaulting to bridge mode is that
SoC use cases require to support multiple independent MAC ports with no
switching so that users can use software bridges with multi-mac
configuration (e.g: to support LAG, HSR/PRP, etc). Also, switching
between multi mac and switch mode requires significant Port and ALE
reconfiguration, therefore is easier to be made as part of mode change
devlink hooks. It also allows to keep user interface similar to what
was implemented for the previous generation of TI CPSW IP
(on AM33/AM43/AM57 SoCs).
Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rafał Miłecki says:

====================
bcm4908_enet: post-review fixes

V2 of my BCM4908 Ethernet patchset was applied to the net-next.git and
it was later that is received some extra reviews. I'm sending patches
that handle pointed out issues.

David: earler I missed that V2 was applied and I sent V3 and V4 of my
inital patchset. Sorry for that. I think it's the best to ignore V3 and
V4 I sent and proceed with this fixes patchset instead.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use le32_to_cpu() for reading __le32 struct field filled by hw.
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use ETH_FCS_LEN instead of magic value and drop incorrect + 2
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. Fix "ensable" typo noticed by Andrew
2. Fix chipset name in the struct net_device_ops variable
Suggested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It seems preferred to let compiler optimize code if applicable.
While at it drop unused enet_umac_maskset().
Suggested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dma_alloc_coherent takes care of zeroing allocated memory
Suggested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

compatible string was updated to match normal naming convention so
update driver as well
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It should be /included/ by every Ethernet controller binding. It adds
support for various generic properties.
Suggested-by: NRob Herring <robh@kernel.org>
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rob pointed out that a normal convention is "brcm,bcm4908-enet" so
update whole binding to match it.
Suggested-by: NRob Herring <robh@kernel.org>
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

el/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2021-02-11

Here's the main bluetooth-next pull request for 5.12:

 - Add support for advertising monitor offliading using Microsoft
   vendor extensions
 - Add firmware download support for MediaTek MT7921U USB devices
 - Suspend-related fixes for Qualcomm devices
 - Add support for Intel GarfieldPeak controller
 - Various other smaller fixes & cleanups

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Geetha sowjanya says:

====================
Add Marvell CN10K support

The current admin function (AF) driver and the netdev driver supports
OcteonTx2 silicon variants. The same OcteonTx2's
Resource Virtualization Unit (RVU) is carried forward to the next-gen
silicon ie OcteonTx3, with some changes and feature enhancements.

This patch set adds support for OcteonTx3 (CN10K) silicon and gets
the drivers to the same level as OcteonTx2. No new OcteonTx3 specific
features are added.

Changes cover below HW level differences
- PCIe BAR address changes wrt shared mailbox memory region
- Receive buffer freeing to HW
- Transmit packet's descriptor submission to HW
- Programmable HW interface identifiers (channels)
- Increased MTU support
- A Serdes MAC block (RPM) configuration

v5-v6
Rebased on top of latest net-next branch.

v4-v5
Fixed sparse warnings.

v3-v4
Fixed compiler warnings.

v2-v3
Reposting as a single thread.
Rebased on top latest net-next branch.

v1-v2
Fixed check-patch reported issues.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MAC on CN10K silicon support loopback for selftest or debug purposes.
This patch does necessary configuration to loopback packets upon receiving
request from LMAC mapped RVU PF's netdev via mailbox.

Also MAC (CGX) on OcteonTx2 silicon variants and MAC (RPM) on
OcteonTx3 CN10K are different and loopback needs to be configured
differently. Upper layer interface between RVU AF and PF netdev is
kept same. Based on silicon variant appropriate fn() pointer is
called to config the MAC.
Signed-off-by: NHariprasad Kelam <hkelam@marvell.com>
Signed-off-by: NGeetha sowjanya <gakula@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RPM supports below list of counters as an extension to existing counters
 *  class based flow control pause frames
 *  vlan/jabber/fragmented packets
 *  fcs/alignment/oversized error packets

This patch adds support to display supported RPM counters via debugfs
and define new mbox rpm_stats to read all support counters.
Signed-off-by: NHariprasad Kelam <hkelam@marvell.com>
Signed-off-by: NGeetha sowjanya <gakula@marvell.com>
Signed-off-by: NSunil Kovvuri Goutham <Sunil.Goutham@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Flow control configuration is different for CGX(Octeontx2)
and RPM(CN10K) functional blocks. This patch adds the necessary
changes for RPM to support 802.3 pause frames configuration on
cn10k platforms.
Signed-off-by: NRakesh Babu <rsaladi2@marvell.com>
Signed-off-by: NGeetha sowjanya <gakula@marvell.com>
Signed-off-by: NSunil Kovvuri Goutham <Sunil.Goutham@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CN10K supports max MTU of 16K on LMAC links and 64k on LBK
links and Octeontx2 silicon supports 9K mtu on both links.
Get the same from nix_get_hw_info mbox message in netdev probe.

This patch also calculates receive buffer size required based
on the MTU set.
Signed-off-by: NHariprasad Kelam <hkelam@marvell.com>
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NGeetha sowjanya <gakula@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

OcteonTx3 CN10K silicon supports bigger MTU when compared
to 9216 MTU supported by OcteonTx2 silicon variants. Lookback
interface supports upto 64K and RPM LMAC interfaces support
upto 16K.

This patch does the necessary configuration and adds support
for PF/VF drivers to retrieve max packet size supported via mbox

This patch also configures tx link credit by considering supported
fifo size and max packet length for Octeontx3 silicon.

This patch also removes platform specific name from the driver name.
Signed-off-by: NHariprasad Kelam <hkelam@marvell.com>
Signed-off-by: NGeetha sowjanya <gakula@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NIX uses unique channel numbers to identify the packet sources/sinks
like CGX,LBK and SDP. The channel numbers assigned to each block are
hardwired in CN9xxx silicon.
The fixed channel numbers in CN9xxx are:

0x0 | a << 8 | b            - LBK(0..3)_CH(0..63)
0x0 | a << 8                - Reserved
0x700 | a                   - SDP_CH(0..255)
0x800 | a << 8 | b << 4 | c - CGX(0..7)_LMAC(0..3)_CH(0..15)

All the channels in the above fixed enumerator(with maximum
number of blocks) are not required since some chips
have less number of blocks.
For CN10K silicon the channel numbers need to be programmed by
software in each block with the base channel number and range of
channels. This patch calculates and assigns the channel numbers
to efficiently distribute the channel number range(0-4095) among
all the blocks. The assignment is made based on the actual number of
blocks present and also contiguously leaving no holes.
The channel numbers remaining after the math are used as new CPT
replay channels present in CN10K. Also since channel numbers are
not fixed the transmit channel link number needed by AF consumers
is calculated by AF and sent along with nix_lf_alloc mailbox response.
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NGeetha sowjanya <gakula@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

OcteonTx2's next gen platform the CN10K has RPM MAC which has a
different serdes when compared to CGX MAC. Though the underlying
HW is different, the CSR interface has been designed largely inline
with CGX MAC, with few exceptions though. So we are using the same
CGX driver for RPM MAC as well and will have a different set of APIs
for RPM where ever necessary.

This patch adds initial support for CN10K's RPM MAC i.e. the driver
registration, communication with firmware etc. For communication with
firmware, RPM provides a different IRQ when compared to CGX.
The CGX and RPM blocks support different features. Currently few
features like ptp, flowcontrol and higig are not supported by RPM. This
patch adds new mailbox message "CGX_FEATURES_GET" to get the list of
features supported by underlying MAC.

RPM has different implementations for RX/TX stats. Unlike CGX,
bar offset of stat registers are different. This patch adds
support to access the same and dump the values in debugfs.
Signed-off-by: NHariprasad Kelam <hkelam@marvell.com>
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NGeetha sowjanya <gakula@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support to use new LMTST lines for NPA batch free
and burst SQE flush. Adds new dev_hw_ops structure to hold platform
specific functions and create new files cn10k.c and cn10k.h.
Signed-off-by: NGeetha sowjanya <gakula@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On CN10K platform transmit/receive buffer alloc and free from/to hardware
had changed to support burst operation. Whereas pervious silicon's only
support single buffer free at a time.
To Support the same firmware allocates a DRAM region for each PF/VF for
storing LMTLINES. These LMTLINES are used for NPA batch free and for
flushing SQE to the hardware.
PF/VF LMTST region is accessed via BAR4. PFs LMTST region is followed
by its VFs mbox memory. The size of region varies from 2KB to 256KB based
on number of LMTLINES configured.

This patch adds support for
- Mapping PF/VF LMTST region.
- Reserves 0-71 (RX + TX + XDP) LMTST lines for NPA batch
  free operation.
- Reserves 72-512 LMTST lines for NIX SQE flush.
Signed-off-by: NGeetha sowjanya <gakula@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>