Enable the standby mode optimization to disable the tda18271
slave tuner output / loop thru options when in low power mode
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fixed one value and removed a duplicate in tda18271_cid_target[],
based on table 54 "CID_Target_map" in Rev.04 of the TDA18271HD datasheet.
Signed-off-by: NHenk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Update the tda18271c2_rf_tracking_filters_correction function to include
the modified temperature compensation calculatation formula as described
in Rev.04 of the TDA18271HD datasheet.
Signed-off-by: NHenk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Don't display "no agc configuration provided" unless DBG_ADV is set.

Fix comments in function, tda18271_agc.  This config variable is not
for LNA configuration -- it is for external AGC configuration.
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Display function parameters, idx and len, in error log.
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

For the case of multiple tuner instances, ensure that non-default
configuration options are saved into the driver's state.

This resolves an issue where a configuration option may not be
carried into the driver if the analog side of a hybrid driver
initializes before the digital side.
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

minor cleanup: move small_i2c assignment to the state config block
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

For better readability, treat the low power standby mode configuration
as an output option feature configuration, and change it to a bitmask.

If left unconfigured, all features will remain enabled, just as the
default configuration was before these changes were introduced.
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add new standby mode:
TDA18271_STANDBY_LT_ON = slave tuner output loop thru on w/ xtal osc off
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

By default, the driver enters standby mode with slave tuner output
loop thru enabled and xtal oscillator on.

Not all designs require that slave tuner output loop thru and
xtal oscillator remain active while in standby mode, so two
additional standby modes have been added:

- standby mode with xtal oscillator on (loop thru off)

- total power off
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove an extra line that it is not needed
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The V4L and DVB API's are there for a long time. however, up to now,
no efforts were done to merge them to kernel DocBook.

This patch adds the current versions of the specs as an unique compendium.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

And mask should be 0xff00 instead of 0xae00.

Thanks to Jochen Friedrich <jochen@scram.de> for pointing this.

Cc: Jochen Friedrich <jochen@scram.de>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

* define names for few values
* decrease buffer len by one byte which was not used
* add check for buffer overflow for sure
* indentation fixes
* remove useless 0 len check from memcpy
It should not happen and if it happens memcpy should not do anything.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix wrongly configured USB1.1 TS EP.

Patch serie also increases USB URB size to reduce wakeups.
USB1.1 URB size from 64 to 940 bytes
USB2.0 URB size from 512 to 16356 bytes
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix wrongly configured USB2.0 TS EP.
Signed-off-by: NJose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add af9015 firmware to get_dvb_firmware script.
Firmware version is 4.95.0.0.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove unused variable from when I introduced the g_std() function.

This work was sponsored by EyeMagnet Limited.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove redundant call to set the vinctrl register.  This eliminates any
ambiguity as to how the register is configured (since it is now always set in
em28xx_set_outfmt).

This work was sponsored by EyeMagnet Limited.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We need to implement the g_std call, or else the default norm always gets
returned, which breaks VBI capturing if you had changed the standard to NTSC
using s_std.

I had temporarily changed the default norm to NTSC so that zvbi-ntsc-cc
wouldn't choke, so now that we are returning the correct value, switch it back
to PAL as the default.

This work was sponsored by EyeMagnet Limited.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Change the code so we only claim to support VBI if the underlying chipset
actually has the support.

This work was sponsored by EyeMagnet Limited.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Do not create the VBI device in cases where VBI is not supported on the target
em28xx chip.

This work was sponsored by EyeMagnet Limited.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove an unreferenced variable introduced during the VBI introduction.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The current locking infrastructure didn't support having multiple fds accessing
the device (such as video and vbi).  Rework the locking infrastructure,
borrowing the design from cx88.

This work was sponsored by EyeMagnet Limited.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When adding support for both video and VBI, I missed the mmap ioctl.  Add
the missing call.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for raw VBI capture for the em28xx bridge, currently only for
NTSC.  Support for PAL capture to follow shortly (including the removal of
numerous hard-coded NTSC-specific sizes for capture buffers, etc).

Note that the code currently changes the default current norm from PAL to
NTSC (so that zvbi-ntsc-cc works properly).  The default norm really should
be moved into a board-level parameter.

This work was sponsored by EyeMagnet Limited.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add code enabling the VBI registers for variants of the em28xx chip that
support VBI, and make sure the isoc streaming code continues to work for
the video component of the stream (note the video and vbi data arrive
intermixed on the same isoc pipe).

Note that this version just drops the actual VBI data onto the floor as
opposed to processing it.  The "#ifdef 0" tags are for the videobuf code that
appears in the next patch in this series.

We created a separate version of the isoc_copy version for parsing the version
of the stream that includes VBI data.  In theory, they might be able to be
merged at some point in the future, but the initial goal is to ensure that we
do not cause any regressions with devices that do not have VBI support.

This work was sponsored by EyeMagnet Limited.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Properly document the video input control register, in preparation for the
addition of VBI support.  Note this patch makes no functional changes.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Lindent caused some compilation breakages. There were also others
related to some other changes at kernel KABI.

There's still one missing warning fix against 2.6.30:

/home/v4l/cx25821/v4l/cx25821-alsa.c: In function 'cx25821_audio_initdev':
/home/v4l/cx25821/v4l/cx25821-alsa.c:706: warning: 'snd_card_new' is deprecated (declared at include/sound/core.h:306)
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The original driver were generated with some dos editor, and used their
own coding style.

This patch does some automatic CodingStyle fixes, by running dos2unix
and Lindent tools.

More work still needs to be done for it to use upstream CodingStyle.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

/home/v4l/master/v4l/cx25821-audups11.c:99: error: implicit declaration of function 'lock_kernel'
/home/v4l/master/v4l/cx25821-audups11.c:112: error: implicit declaration of function 'unlock_kernel'
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

GIT_BRANCH=devel
GIT_AUTHOR_DATE=1252851239
GIT_AUTHOR_NAME=Palash Bandyopadhyay
GIT_AUTHOR_EMAIL=Palash.Bandyopadhyay@conexant.com
Add conexant cx25821 driver release v106 of the Athena driver.
Signed-off-by: NPalash Bandyopadhyay <palash.bandyopadhyay@conexant.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits)
  x86: Move get/set_wallclock to x86_platform_ops
  x86: platform: Fix section annotations
  x86: apic namespace cleanup
  x86: Distangle ioapic and i8259
  x86: Add Moorestown early detection
  x86: Add hardware_subarch ID for Moorestown
  x86: Add early platform detection
  x86: Move tsc_init to late_time_init
  x86: Move tsc_calibration to x86_init_ops
  x86: Replace the now identical time_32/64.c by time.c
  x86: time_32/64.c unify profile_pc
  x86: Move calibrate_cpu to tsc.c
  x86: Make timer setup and global variables the same in time_32/64.c
  x86: Remove mca bus ifdef from timer interrupt
  x86: Simplify timer_ack magic in time_32.c
  x86: Prepare unification of time_32/64.c
  x86: Remove do_timer hook
  x86: Add timer_init to x86_init_ops
  x86: Move percpu clockevents setup to x86_init_ops
  x86: Move xen_post_allocator_init into xen_pagetable_setup_done
  ...

Fix up conflicts in arch/x86/include/asm/io_apic.h