- 30 4月, 2007 40 次提交
-
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
offset > fi->offset + fi->len - 1 == !(offset < fi->offset + fi->len) offset + len - 1 < fi->offset == !(offset + len > fi->offset) !(A || B) == (!A && !B) Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
We can't reconfigure the MAC address, hence we don't need the callback. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
because CONFIG_IEEE1394_ETH1394 depends on it. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
RFC 2734 says: "IP-capable nodes may operate with an MTU size larger than the default [1500 octets], but the means by which a larger MTU is configured are beyond the scope of this document." Allow users to set an MTU bigger than 1500. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Adrian Bunk 提交于
highlevel_host_reset no longer has any modular users. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Call only eth1394's own host reset handler from .tx_timeout, not the reset hooks of all other IEEE 1394 drivers. A minor drawback of this patch is that ether1394_host_reset by timeout is not serialized against ether1394_host_reset by bus reset. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
The old argument calculated the correct value in a wrong way. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Move common code into an extra function. This implicitly adds a missing node_info->fifo = CSR1212_INVALID_ADDR_SPACE; to .update. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Adjust white space and line wraps. Remove unnecessary parentheses and braces, unused macros, and some of the more redundant comments. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Jean Delvare 提交于
There is some common code between ether1394_open and ether1394_add_host which can be moved to a separate helper function for a slightly smaller eth1394 driver (-160 bytes on i386.) Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Until now, ieee1394 put an IP-over-1394 capability entry into each new host's config ROM. As soon as the controller was initialized --- i.e. right after modprobe ohci1394 --- this entry triggered a hotplug event which typically caused auto-loading of eth1394. This irritated or annoyed many users and distributors. Of course they could blacklist eth1394, but then ieee1394 wrongly advertized IP-over- 1394 capability to the FireWire bus. Therefore - remove the offending kernel config option IEEE1394_CONFIG_ROM_IP1394, - let eth1394 add the ROM entry by itself, i.e. only after eth1394 was loaded. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=7793 . To emulate the behaviour of older kernels, simply add the following to to /etc/modprobe.conf: install ohci1394 /sbin/modprobe eth1394; \ /sbin/modprobe --ignore-install ohci1394 Note, autoloading of eth1394 when an _external_ IP-over-1394 capable device is discovered is _not_ affected by this patch. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Shrinks eth1394.ko by about 5%. Many of these functions have only one caller and are therefore auto- inlined anyway. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
ether1394_add_host() guarantees that hi->dev != NULL if hi != NULL. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Warn if hpsb_allocate_and_register_addrspace() failed. Unregister the address space if something else failed. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
The comment says it all. This affects only asynchronous streams sent via raw1394; the eth1394 driver has own code and needs an own fix. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Milind Arun Choudhary 提交于
SPIN_LOCK_UNLOCKED cleanup,use DEFINE_SPINLOCK instead Signed-off-by: NMilind Arun Choudhary <milindchoudhary@gmail.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Shrinks object file size a little bit. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Everytime when eth1394 or a libraw1394 client updates the configuration ROM, a certain sysfs attribute cannot be added since it already exists. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
This is a coding style touch-up for ieee1394's handle_incoming_packet(). A preprocessor macro contained hardwired variable names and, even worse, the 'break' keyword. This macro is now unrolled and removed. Also, all 'break's which had the effect of a return are replaced by return. And a FIXME comment is brought up to date. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Andrew Morton 提交于
alpha: drivers/ieee1394/iso.c: In function 'hpsb_iso_xmit_sync': drivers/ieee1394/iso.c:440: error: invalid use of undefined type 'struct task_struct' drivers/ieee1394/iso.c:440: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) drivers/ieee1394/iso.c:440: error: (Each undeclared identifier is reported only once drivers/ieee1394/iso.c:440: error: for each function it appears in.) drivers/ieee1394/iso.c:440: warning: implicit declaration of function 'signal_pending' drivers/ieee1394/iso.c:440: error: invalid use of undefined type 'struct task_struct' drivers/ieee1394/iso.c:440: warning: implicit declaration of function 'schedule' drivers/ieee1394/iso.c: In function 'hpsb_iso_wake': drivers/ieee1394/iso.c:562: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (brought into alphabetic order)
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Torsten Kaiser 提交于
drivers/ieee1394/ieee1394_transactions.c fails for me if CONFIG_SMP=n gcc complains: CC drivers/ieee1394/ieee1394_transactions.o drivers/ieee1394/ieee1394_transactions.c: In function 'hpsb_get_tlabel': drivers/ieee1394/ieee1394_transactions.c:183: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) drivers/ieee1394/ieee1394_transactions.c:183: error: (Each undeclared identifier is reported only once Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (added comment)
-
由 Randy Dunlap 提交于
Fix printk format string: drivers/ieee1394/ieee1394_core.c:702: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
This considerably reduces the memory requirements for a packet and eliminates ieee1394's dependency on CONFIG_NET. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
This will point out firmware bugs. I tested with 11 SBP-2 devices and one OS X PC and got these errors from two old CD-RWs only. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Code beneath two labels called "fail" is actually also reached in case of success. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
We want bugs to show themselves. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Make unnecessarily generic code specific and thus simpler. Shrink a lookup table from 128 to 16 bytes. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Whitespace, line breaks, braces... Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
The biggest chunk ever allocated by CSR1212_MALLOC is 1024 Bytes + sizeof(struct csr1212_csr_rom_cache) big. Most of the time much smaller data structures are allocated. Therefore vmalloc is a waste. The one exception is csr1212_append_new_cache() which is called to append a chunk of CSR1212_EXTENDED_ROM_SIZE + sizeof(struct csr1212_csr_rom_cache) if the currently allocated ROM cache is too small. CSR1212_EXTENDED_ROM_SIZE is generously defined as 256 kBytes. In SVN commit 1220, Steve Kinneberg lowered this to 2 kBytes in the config_rom_2.4 branch. This same commit also switched CSR1212_MALLOC from kmalloc to vmalloc in the SVN trunk branch: > r1220 | kberg | 2004-05-31 01:51:44 +0200 (Mon, 31 May 2004) | 13 lines > > CSR1212 Extended ROM bug fixes: > trunk line changes: > - Use vmalloc instead of kmalloc > - Change delayed_reset_bus() to operate in a work_queue instead of a > timer interrupt. > - Fix hpsb_allocate_and_register_addrspace() to not allocate space > on top of already allocated space. > - Fix problems in csr1212.c filling ConfigROM images when extend > ROMs are present. > config-rom-2.4 changes: > - Changed extended rom allocation from 256K to 8K. (It was actually 2 kB, not 8 kB.) > - Fix hpsb_allocate_and_register_addrspace() to not allocate space > on top of already allocated space. > - Fix problems in csr1212.c filling ConfigROM images when extend > ROMs are present. I am now setting CSR1212_EXTENDED_ROM_SIZE to 2 kB minus the overhead of struct csr1212_csr_rom_cache. Note, this code path is not used by the in-kernel drivers though. raw1394 could trigger it, but the respective libraw1394 functions don't exist yet. Furthermore, userspace programs can replace the entire local ROM via raw1394. If kmalloc does not fulfill their needs --- well, tough luck. I decree that nobody needs such huge extended ROMs. (Extended ROMs are defined by IEEE 1212 clause 7.7.18. The spec does not impose practically relevant restrictions on the size of extended ROM chunks.) Another potentially demanding use of CSR1212_MALLOC is if external FireWire devices come with Extended ROM entries. If they are too big for kmalloc (or have been too big for vmalloc) we just fail to read their ROM. This is quite unlikely though, to my knowledge. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
This small reorganization of public csr1212 functions saves one exported symbol and a few bytes in the driver modules. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
return -EINVAL becomes BUG_ON in checks of function call parameters. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Use u8, u32 etc. instead of u_int8_t, csr1212_quad_t etc. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
csr1212 was written to be compiled either as part of the ieee1394 kernel driver or of an anticipated IEEE 1212 userspace library. We now drop support for the latter. The costs in terms of code footprint and depth of abstraction are not countered by any actual benefit. Also remove some obsolete #includes. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Delete unused code. Make some extern functions static. Remove superfluous inline keywords. Move private definitions from csr1212.h to csr1212.c. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-