Currently, checks for whether VT-d PI can be used refer to the current
status of the feature in the current vCPU; or they more or less pick
vCPU 0 in case a specific vCPU is not available.

However, these checks do not attempt to synchronize with changes to
the IRTE.  In particular, there is no path that updates the IRTE when
APICv is re-activated on vCPU 0; and there is no path to wakeup a CPU
that has APICv disabled, if the wakeup occurs because of an IRTE
that points to a posted interrupt.

To fix this, always go through the VT-d PI path as long as there are
assigned devices and APICv is available on both the host and the VM side.
Since the relevant condition was copied over three times, take the hint
and factor it into a separate function.
Suggested-by: NSean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: NDavid Matlack <dmatlack@google.com>
Message-Id: <20211123004311.2954158-5-pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The IRTE for an assigned device can trigger a POSTED_INTR_VECTOR even
if APICv is disabled on the vCPU that receives it.  In that case, the
interrupt will just cause a vmexit and leave the ON bit set together
with the PIR bit corresponding to the interrupt.

Right now, the interrupt would not be delivered until APICv is re-enabled.
However, fixing this is just a matter of always doing the PIR->IRR
synchronization, even if the vCPU has temporarily disabled APICv.

This is not a problem for performance, or if anything it is an
improvement.  First, in the common case where vcpu->arch.apicv_active is
true, one fewer check has to be performed.  Second, static_call_cond will
elide the function call if APICv is not present or disabled.  Finally,
in the case for AMD hardware we can remove the sync_pir_to_irr callback:
it is only needed for apic_has_interrupt_for_ppr, and that function
already has a fallback for !APICv.

Cc: stable@vger.kernel.org
Co-developed-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: NDavid Matlack <dmatlack@google.com>
Message-Id: <20211123004311.2954158-4-pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If APICv is disabled for this vCPU, assigned devices may still attempt to
post interrupts.  In that case, we need to cancel the vmentry and deliver
the interrupt with KVM_REQ_EVENT.  Extend the existing code that handles
injection of L1 interrupts into L2 to cover this case as well.

vmx_hwapic_irr_update is only called when APICv is active so it would be
confusing to add a check for vcpu->arch.apicv_active in there.  Instead,
just use vmx_set_rvi directly in vmx_sync_pir_to_irr.

Cc: stable@vger.kernel.org
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: NDavid Matlack <dmatlack@google.com>
Reviewed-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211123004311.2954158-3-pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

A kvm_page_table_test run with its default settings fails on VMX due to
memory region add failure:
> ==== Test Assertion Failure ====
>  lib/kvm_util.c:952: ret == 0
>  pid=10538 tid=10538 errno=17 - File exists
>     1  0x00000000004057d1: vm_userspace_mem_region_add at kvm_util.c:947
>     2  0x0000000000401ee9: pre_init_before_test at kvm_page_table_test.c:302
>     3   (inlined by) run_test at kvm_page_table_test.c:374
>     4  0x0000000000409754: for_each_guest_mode at guest_modes.c:53
>     5  0x0000000000401860: main at kvm_page_table_test.c:500
>     6  0x00007f82ae2d8554: ?? ??:0
>     7  0x0000000000401894: _start at ??:?
>  KVM_SET_USER_MEMORY_REGION IOCTL failed,
>  rc: -1 errno: 17
>  slot: 1 flags: 0x0
>  guest_phys_addr: 0xc0000000 size: 0x40000000

This is because the memory range that this test is trying to add
(0x0c0000000 - 0x100000000) conflicts with LAPIC mapping at 0x0fee00000.

Looking at the code it seems that guest_test_*phys*_mem variable gets
mistakenly overwritten with guest_test_*virt*_mem while trying to adjust
the former for alignment.
With the correct variable adjusted this test runs successfully.
Signed-off-by: NMaciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <52e487458c3172923549bbcf9dfccfbe6faea60b.1637940473.git.maciej.szmigiero@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Account for the '0' being a default, "let KVM choose" period, when
determining whether or not the recovery worker needs to be awakened in
response to userspace reducing the period.  Failure to do so results in
the worker not being awakened properly, e.g. when changing the period
from '0' to any small-ish value.

Fixes: 4dfe4f40 ("kvm: x86: mmu: Make NX huge page recovery period configurable")
Cc: stable@vger.kernel.org
Cc: Junaid Shahid <junaids@google.com>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211120015706.3830341-1-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Initialize the mask for PKU permissions as if CR4.PKE=0, avoiding
incorrect interpretations of the nested hypervisor's page tables.

Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Drop the "flush" param and return values to/from the TDP MMU's helper for
zapping collapsible SPTEs.  Because the helper runs with mmu_lock held
for read, not write, it uses tdp_mmu_zap_spte_atomic(), and the atomic
zap handles the necessary remote TLB flush.

Similarly, because mmu_lock is dropped and re-acquired between zapping
legacy MMUs and zapping TDP MMUs, kvm_mmu_zap_collapsible_sptes() must
handle remote TLB flushes from the legacy MMU before calling into the TDP
MMU.

Fixes: e2209710 ("KVM: x86/mmu: Skip rmap operations if rmaps not allocated")
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211120045046.3940942-4-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use the yield-safe variant of the TDP MMU iterator when handling an
unmapping event from the MMU notifier, as most occurences of the event
allow yielding.

Fixes: e1eed584 ("KVM: x86/mmu: Allow yielding during MMU notifier unmap/zap, if possible")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211120015008.3780032-1-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

INVLPG operates on guest virtual address, which are represented by
vcpu->arch.walk_mmu.  In nested virtualization scenarios,
kvm_mmu_invlpg() was using the wrong MMU structure; if L2's invlpg were
emulated by L0 (in practice, it hardly happen) when nested two-dimensional
paging is enabled, the call to ->tlb_flush_gva() would be skipped and
the hardware TLB entry would not be invalidated.
Signed-off-by: NLai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211124122055.64424-5-jiangshanlai@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If the is an L1 with nNPT in 32bit, the shadow walk starts with
pae_root.

Fixes: a717a780 ("KVM: x86/mmu: Support shadowing NPT when 5-level paging is enabled in host)
Signed-off-by: NLai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211124122055.64424-2-jiangshanlai@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

With the elevated 'KVM_CAP_MAX_VCPUS' value kvm_create_max_vcpus test
may hit RLIMIT_NOFILE limits:

 # ./kvm_create_max_vcpus
 KVM_CAP_MAX_VCPU_ID: 4096
 KVM_CAP_MAX_VCPUS: 1024
 Testing creating 1024 vCPUs, with IDs 0...1023.
 /dev/kvm not available (errno: 24), skipping test

Adjust RLIMIT_NOFILE limits to make sure KVM_CAP_MAX_VCPUS fds can be
opened. Note, raising hard limit ('rlim_max') requires CAP_SYS_RESOURCE
capability which is generally not needed to run kvm selftests (but without
raising the limit the test is doomed to fail anyway).
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211123135953.667434-1-vkuznets@redhat.com>
[Skip the test if the hard limit can be raised. - Paolo]
Reviewed-by: NSean Christopherson <seanjc@google.com>
Tested-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 63f5a190 ("KVM: x86: Alert userspace that KVM_SET_CPUID{,2}
after KVM_RUN is broken") officially deprecated KVM_SET_CPUID{,2} ioctls
after first successful KVM_RUN and promissed to make this sequence forbiden
in 5.16. It's time to fulfil the promise.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211122175818.608220-3-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

hyperv_features's sole purpose is to test access to various Hyper-V MSRs
and hypercalls with different CPUID data. As KVM_SET_CPUID2 after KVM_RUN
is deprecated and soon-to-be forbidden, avoid it by re-creating test VM
for each sub-test.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211122175818.608220-2-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Fully emulate a guest TLB flush on nested VM-Enter which changes vpid12,
i.e. L2's VPID, instead of simply doing INVVPID to flush real hardware's
TLB entries for vpid02.  From L1's perspective, changing L2's VPID is
effectively a TLB flush unless "hardware" has previously cached entries
for the new vpid12.  Because KVM tracks only a single vpid12, KVM doesn't
know if the new vpid12 has been used in the past and so must treat it as
a brand new, never been used VPID, i.e. must assume that the new vpid12
represents a TLB flush from L1's perspective.

For example, if L1 and L2 share a CR3, the first VM-Enter to L2 (with a
VPID) is effectively a TLB flush as hardware/KVM has never seen vpid12
and thus can't have cached entries in the TLB for vpid12.
Reported-by: NLai Jiangshan <jiangshanlai+lkml@gmail.com>
Fixes: 5c614b35 ("KVM: nVMX: nested VPID emulation")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211125014944.536398-3-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Like KVM_REQ_TLB_FLUSH_CURRENT, the GUEST variant needs to be serviced at
nested transitions, as KVM doesn't track requests for L1 vs L2.  E.g. if
there's a pending flush when a nested VM-Exit occurs, then the flush was
requested in the context of L2 and needs to be handled before switching
to L1, otherwise the flush for L2 would effectiely be lost.

Opportunistically add a helper to handle CURRENT and GUEST as a pair, the
logic for when they need to be serviced is identical as both requests are
tied to L1 vs. L2, the only difference is the scope of the flush.
Reported-by: NLai Jiangshan <jiangshanlai+lkml@gmail.com>
Fixes: 07ffaf34 ("KVM: nVMX: Sync all PGDs on nested transition with shadow paging")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211125014944.536398-2-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Flush the current VPID when handling KVM_REQ_TLB_FLUSH_GUEST instead of
always flushing vpid01.  Any TLB flush that is triggered when L2 is
active is scoped to L2's VPID (if it has one), e.g. if L2 toggles CR4.PGE
and L1 doesn't intercept PGE writes, then KVM's emulation of the TLB
flush needs to be applied to L2's VPID.
Reported-by: NLai Jiangshan <jiangshanlai+lkml@gmail.com>
Fixes: 07ffaf34 ("KVM: nVMX: Sync all PGDs on nested transition with shadow paging")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211125014944.536398-2-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The capability, albeit present, was never exposed via KVM_CHECK_EXTENSION.

Fixes: b5663931 ("KVM: SEV: Add support for SEV intra host migration")
Cc: Peter Gonda <pgonda@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Ensure that the ASID are freed promptly, which becomes more important
when more tests are added to this file.

Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM leaves the source VM in a dead state,
so migrating back to the original source VM fails the ioctl.  Adjust
the test.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Synchronize the two calls to kvm_x86_sync_pir_to_irr.  The one
in the reenter-guest fast path invoked the callback unconditionally
even if LAPIC is present but disabled.  In this case, there are
no interrupts to deliver, and therefore posted interrupts can
be ignored.

Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is not an unrecoverable situation.  Users of kvm_read_guest_offset_cached
and kvm_write_guest_offset_cached must expect the read/write to fail, and
therefore it is possible to just return early with an error value.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

An uninitialized gfn_to_hva_cache has ghc->len == 0, which causes
the accessors to croak very loudly.  While a BUG_ON is definitely
_too_ loud and a bug on its own, there is indeed an issue of using
the caches in such a way that they could not have been initialized,
because ghc->gpa == 0 might match and thus kvm_gfn_to_hva_cache_init
would not be called.

For the vmcs12_cache, the solution is simply to invoke
kvm_gfn_to_hva_cache_init unconditionally: we already know
that the cache does not match the current VMCS pointer.
For the shadow_vmcs12_cache, there is no similar condition
that checks the VMCS link pointer, so invalidate the cache
on VMXON.

Fixes: cee66664 ("KVM: nVMX: Use a gfn_to_hva_cache for vmptrld")
Acked-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Reported-by: syzbot+7b7db8bb4db6fd5e157b@syzkaller.appspotmail.com
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvmarm-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 5.16, take #2

- Fix constant sign extension affecting TCR_EL2 and preventing
  running on ARMv8.7 models due to spurious bits being set

- Fix use of helpers using PSTATE early on exit by always sampling
  it as soon as the exit takes place

- Move pkvm's 32bit handling into a common helper

KVM/riscv fixes for 5.16, take #1

- Fix incorrect KVM_MAX_VCPUS value

- Unmap stage2 mapping when deleting/moving a memslot
  (This was due to empty kvm_arch_flush_shadow_memslot())

Having a signed (1 << 31) constant for TCR_EL2_RES1 and CPTR_EL2_TCPAC
causes the upper 32-bit to be set to 1 when assigning them to a 64-bit
variable. Bit 32 in TCR_EL2 is no longer RES0 in ARMv8.7: with FEAT_LPA2
it changes the meaning of bits 49:48 and 9:8 in the stage 1 EL2 page
table entries. As a result of the sign-extension, a non-VHE kernel can
no longer boot on a model with ARMv8.7 enabled.

CPTR_EL2 still has the top 32 bits RES0 but we should preempt any future
problems

Make these top bit constants unsigned as per commit df655b75
("arm64: KVM: Avoid setting the upper 32 bits of VTCR_EL2 to 1").
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Reported-by: NChris January <Chris.January@arm.com>
Cc: <stable@vger.kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211125152014.2806582-1-catalin.marinas@arm.com

Protected KVM is trying to turn AArch32 exceptions into an illegal
exception entry. Unfortunately, it does that in a way that is a bit
abrupt, and too early for PSTATE to be available.

Instead, move it to the fixup code, which is a more reasonable place
for it. This will also be useful for the NV code.
Reviewed-by: NFuad Tabba <tabba@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>

In order to be able to use primitives such as vcpu_mode_is_32bit(),
we need to synchronize the guest PSTATE. However, this is currently
done deep into the bowels of the world-switch code, and we do have
helpers evaluating this much earlier (__vgic_v3_perform_cpuif_access
and handle_aarch32_guest, for example).

Move the saving of the guest pstate into the early fixups, which
cures the first issue. The second one will be addressed separately.
Tested-by: NFuad Tabba <tabba@google.com>
Reviewed-by: NFuad Tabba <tabba@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>

The KVM_MAX_VCPUS value is supposed to be aligned with number of
VMID bits in the hgatp CSR but the current KVM_MAX_VCPUS value
is aligned with number of ASID bits in the satp CSR.

Fixes: 99cdc6c1 ("RISC-V: Add initial skeletal KVM support")
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Reviewed-by: NAtish Patra <atishp@rivosinc.com>

Unmap stage2 page tables when a memslot is being deleted or moved.  It's
the architectures' responsibility to ensure existing mappings are removed
when kvm_arch_flush_shadow_memslot() returns.

Fixes: 9d05c1fe ("RISC-V: KVM: Implement stage2 page table programming")
Signed-off-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>

Pull x86 fixes from Thomas Gleixner:

 - Move the command line preparation and the early command line parsing
   earlier so that the command line parameters which affect
   early_reserve_memory(), e.g. efi=nosftreserve, are taken into
   account. This was broken when the invocation of
   early_reserve_memory() was moved recently.

 - Use an atomic type for the SGX page accounting, which is read and
   written locklessly, to plug various race conditions related to it.

* tag 'x86-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Fix free page accounting
  x86/boot: Pull up cmdline preparation and early param parsing

Pull x86 perf fixes from Thomas Gleixner:

 - Remove unneded PEBS disabling when taking LBR snapshots to prevent an
   unchecked MSR access error.

 - Fix IIO event constraints for Snowridge and Skylake server chips.

* tag 'perf-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/perf: Fix snapshot_branch_stack warning in VM
  perf/x86/intel/uncore: Fix IIO event constraints for Snowridge
  perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server
  perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server

Pull more powerpc fixes from Michael Ellerman:

 - Fix a bug in copying of sigset_t for 32-bit systems, which caused X
   to not start.

 - Fix handling of shared LSIs (rare) with the xive interrupt controller
   (Power9/10).

 - Fix missing TOC setup in some KVM code, which could result in oopses
   depending on kernel data layout.

 - Fix DMA mapping when we have persistent memory and only one DMA
   window available.

 - Fix further problems with STRICT_KERNEL_RWX on 8xx, exposed by a
   recent fix.

 - A couple of other minor fixes.

Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Cédric Le Goater,
Christian Zigotzky, Christophe Leroy, Daniel Axtens, Finn Thain, Greg
Kurz, Masahiro Yamada, Nicholas Piggin, and Uwe Kleine-König.

* tag 'powerpc-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/xive: Change IRQ domain to a tree domain
  powerpc/8xx: Fix pinned TLBs with CONFIG_STRICT_KERNEL_RWX
  powerpc/signal32: Fix sigset_t copy
  powerpc/book3e: Fix TLBCAM preset at boot
  powerpc/pseries/ddw: Do not try direct mapping with persistent memory and one window
  powerpc/pseries/ddw: simplify enable_ddw()
  powerpc/pseries/ddw: Revert "Extend upper limit for huge DMA window for persistent memory"
  powerpc/pseries: Fix numa FORM2 parsing fallback code
  powerpc/pseries: rename numa_dist_table to form2_distances
  powerpc: clean vdso32 and vdso64 directories
  powerpc/83xx/mpc8349emitx: Drop unused variable
  KVM: PPC: Book3S HV: Use GLOBAL_TOC for kvmppc_h_set_dabr/xdabr()

On 32-bit:

    fs/pstore/blk.c: In function ‘__best_effort_init’:
    include/linux/kern_levels.h:5:18: warning: format ‘%zu’ expects argument of type ‘size_t’, but argument 3 has type ‘long unsigned int’ [-Wformat=]
	5 | #define KERN_SOH "\001"  /* ASCII Start Of Header */
	  |                  ^~~~~~
    include/linux/kern_levels.h:14:19: note: in expansion of macro ‘KERN_SOH’
       14 | #define KERN_INFO KERN_SOH "6" /* informational */
	  |                   ^~~~~~~~
    include/linux/printk.h:373:9: note: in expansion of macro ‘KERN_INFO’
      373 |  printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
	  |         ^~~~~~~~~
    fs/pstore/blk.c:314:3: note: in expansion of macro ‘pr_info’
      314 |   pr_info("attached %s (%zu) (no dedicated panic_write!)\n",
	  |   ^~~~~~~

Cc: stable@vger.kernel.org
Fixes: 7bb9557b ("pstore/blk: Use the normal block device I/O path")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NKees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210629103700.1935012-1-geert@linux-m68k.org
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge misc fixes from Andrew Morton:
 "15 patches.

  Subsystems affected by this patch series: ipc, hexagon, mm (swap,
  slab-generic, kmemleak, hugetlb, kasan, damon, and highmem), and proc"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  proc/vmcore: fix clearing user buffer by properly using clear_user()
  kmap_local: don't assume kmap PTEs are linear arrays in memory
  mm/damon/dbgfs: fix missed use of damon_dbgfs_lock
  mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation
  kasan: test: silence intentional read overflow warnings
  hugetlb, userfaultfd: fix reservation restore on userfaultfd error
  hugetlb: fix hugetlb cgroup refcounting during mremap
  mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
  hexagon: ignore vmlinux.lds
  hexagon: clean up timer-regs.h
  hexagon: export raw I/O routines for modules
  mm: emit the "free" trace report before freeing memory in kmem_cache_free()
  shm: extend forced shm destroy to support objects from several IPC nses
  ipc: WARN if trying to remove ipc object which is absent
  mm/swap.c:put_pages_list(): reinitialise the page list

Pull block fixes from Jens Axboe:

 - Flip a cap check to avoid a selinux error (Alistair)

 - Fix for a regression this merge window where we can miss a queue ref
   put (me)

 - Un-mark pstore-blk as broken, as the condition that triggered that
   change has been rectified (Kees)

 - Queue quiesce and sync fixes (Ming)

 - FUA insertion fix (Ming)

 - blk-cgroup error path put fix (Yu)

* tag 'block-5.16-2021-11-19' of git://git.kernel.dk/linux-block:
  blk-mq: don't insert FUA request with data into scheduler queue
  blk-cgroup: fix missing put device in error path from blkg_conf_pref()
  block: avoid to quiesce queue in elevator_init_mq
  Revert "mark pstore-blk as broken"
  blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release()
  block: fix missing queue put in error path
  block: Check ADMIN before NICE for IOPRIO_CLASS_RT

Pull pin control fixes from Linus Walleij:
 "There is an ACPI stubs fix which is ACKed by the ACPI maintainer for
  merging through my tree.

  One item stand out and that is that I delete the <linux/sdb.h> header
  that is used by nothing. I deleted this subsystem (through the GPIO
  tree) a while back so I feel responsible for tidying up the floor.

  Other than that it is the usual mistakes, a bit noisy around build
  issue and Kconfig then driver fixes.

  Specifics:

   - Fix some stubs causing compile issues for ACPI.

   - Fix some wakeups on AMD IRQs shared between GPIO and SCI.

   - Fix a build warning in the Tegra driver.

   - Fix a Kconfig issue in the Qualcomm driver.

   - Add a missing include the RALink driver.

   - Return a valid type for the Apple pinctrl IRQs.

   - Implement some Qualcomm SDM845 dual-edge errata.

   - Remove the unused <linux/sdb.h> header. (The subsystem was once
     deleted by the pinctrl maintainer...)

   - Fix a duplicate initialized in the Tegra driver.

   - Fix register offsets for UFS and SDC in the Qualcomm SM8350 driver"

* tag 'pinctrl-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: sm8350: Correct UFS and SDC offsets
  pinctrl: tegra194: remove duplicate initializer again
  Remove unused header <linux/sdb.h>
  pinctrl: qcom: sdm845: Enable dual edge errata
  pinctrl: apple: Always return valid type in apple_gpio_irq_type
  pinctrl: ralink: include 'ralink_regs.h' in 'pinctrl-mt7620.c'
  pinctrl: qcom: fix unmet dependencies on GPIOLIB for GPIOLIB_IRQCHIP
  pinctrl: tegra: Return const pointer from tegra_pinctrl_get_group()
  pinctrl: amd: Fix wakeups when IRQ is shared with SCI
  ACPI: Add stubs for wakeup handler functions

Pull s390 updates from Heiko Carstens:

 - Add missing Kconfig option for ftrace direct multi sample, so it can
   be compiled again, and also add s390 support for this sample.

 - Update Christian Borntraeger's email address.

 - Various fixes for memory layout setup. Besides other this makes it
   possible to load shared DCSS segments again.

 - Fix copy to user space of swapped kdump oldmem.

 - Remove -mstack-guard and -mstack-size compile options when building
   vdso binaries. This can happen when CONFIG_VMAP_STACK is disabled and
   results in broken vdso code which causes more or less random
   exceptions. Also remove the not needed -nostdlib option.

 - Fix memory leak on cpu hotplug and return code handling in kexec
   code.

 - Wire up futex_waitv system call.

 - Replace snprintf with sysfs_emit where appropriate.

* tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  ftrace/samples: add s390 support for ftrace direct multi sample
  ftrace/samples: add missing Kconfig option for ftrace direct multi sample
  MAINTAINERS: update email address of Christian Borntraeger
  s390/kexec: fix memory leak of ipl report buffer
  s390/kexec: fix return code handling
  s390/dump: fix copying to user-space of swapped kdump oldmem
  s390: wire up sys_futex_waitv system call
  s390/vdso: filter out -mstack-guard and -mstack-size
  s390/vdso: remove -nostdlib compiler flag
  s390: replace snprintf in show functions with sysfs_emit
  s390/boot: simplify and fix kernel memory layout setup
  s390/setup: re-arrange memblock setup
  s390/setup: avoid using memblock_enforce_memory_limit
  s390/setup: avoid reserving memory above identity mapping

Pull cifs fixes from Steve French:
 "Three small cifs/smb3 fixes: two to address minor coverity issues and
  one cleanup"

* tag '5.16-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: introduce cifs_ses_mark_for_reconnect() helper
  cifs: protect srv_count with cifs_tcp_ses_lock
  cifs: move debug print out of spinlock