- this patch will fix a panic caused by omitted memory allocation for the nvram.
Signed-off-by: NSeokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Not doing this can cause cards less than u160 capable to send out PPR
offers to devices they can't then deliver on ... causing some devices to
get a bit confused.  Fix by capping the start syncrate at the
appropriate level according to the card capabilities.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The SCSI Tape driver uses a semaphore as mutex. Use the mutex API
instead of the (binary) semaphore.
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Acked-by: NKai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This updates sg_io_v4 structure (based on Doug's RFC, release 1.3).

The major changes are:

- add dout_resid field
- increase tag size to 64 bits to comply with SAM-4 and SRP
- add dout_iovec_count and din_iovec_count

dout_iovec_count and din_iovec_count aren't supported now. I'm not
sure whether they will be supported or not but they were added for the
possible future changes.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Wire up the mpt_debug_level module parameter so you can write to the
/sys/module/mptbase/parameters/mpt_debug_level and have it take effect
in every ioc.
Acked-by: N"Moore, Eric" <Eric.Moore@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

If you have the libsas with ATA support, it needs libata to function.
The problem is that if you compile in libsas, you can't build libata
as a module (however, vice versa you can).
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch

* removes struct members that duplicate pci_dev members
* replaces ha->stype usage with ha->pdev->device usage where feasible
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Acked-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NAchim Leubner <Achim_Leubner@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

No need to check use_sg since sg_tablesize is set appropriately in the
scsi host template.

Brian King's patch (2a730937) did this
cleanup but the data buffer accessors patch (written before the patch
and merged after it) restored the check.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NSwen Schillig <swen@vnet.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23:
  sh: Fix fs.h removal from mm.h regressions.
  sh: fix get_wchan() for SH kernels without framepointers
  sh: arch/sh/boot - fix shell usage
  rtc: rtc-sh: Correct sh_rtc_set_time() for some SH-3 parts.
  sh: remove support for sh7300 and solution engine 7300
  sh: Add sh to the CC_OPTIMIZE_FOR_SIZE dependencies.
  sh: Kill off virt_to_bus()/bus_to_virt().
  sh: sh-sci - fix SH7708 support
  sh: Restrict DSP support to specific CPUs.
  sh: Silence sq compile warning on sh4 nommu.
  sh: Kill the rest of the SE73180 cruft.
  sh: remove support for sh73180 and solution engine 73180
  sh: remove old broken pint code
  sh: Reclaim beginning of P3 space for vmalloc area.
  sh: Fix Dreamcast DMA issues.
  sh: Add kmap_coherent()/kunmap_coherent() interface for SH-4.

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
  sh64: Kill off virt_to_bus()/bus_to_virt().
  sh64: Fix irq_intc build failure.
  sh64: Fix fs.h removal from mm.h regressions.

Follows the SH change.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Needs interrupt.h:

  CC      arch/sh64/kernel/irq_intc.o
arch/sh64/kernel/irq_intc.c: In function 'make_intc_irq':
arch/sh64/kernel/irq_intc.c:179: error: implicit declaration of function 'disable_irq_nosync'
make[1]: *** [arch/sh64/kernel/irq_intc.o] Error 1
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  Fix a potential NULL pointer dereference in mace_interrupt() in drivers/net/pcmcia/nmclan_cs.c
  PATCH kernel 2.6.22] PCMCIA-NETDEV : modify smc91c92_cs.c to become SMP safe
  S2io: Increment received packet count correctly
  S2io: Fix crash when resetting adapter
  S2io: Mask spurious interrupts
  S2IO: Implementing review comments from old patches
  S2IO: Checking for the return value of pci map function
  S2IO: Removing MSI support from driver
  S2IO: Removing 3 buffer mode support from the driver
  netxen: drop redudant spinlock
  netxen: Fix interrupt handling for multiport adapters
  netxen: re-init station address after h/w init
  tulip: Remove tulip maintainer
  forcedeth: mac address correct
  gfar: Fix modpost warning
  lib8390: comment on locking by Alan Cox
  Fix a potential NULL pointer dereference in write_bulk_callback() in drivers/net/usb/pegasus.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ipath: Workaround problem of errormask register being overwritten
  IB/ipath: Fix some issues with buffer cancel and sendctrl register update
  IB/ipath: Use faster put_tid_2 routine after initialization
  IB/ipath: Remove unsafe fastrcvint code from interrupt handler
  IB/ehca: Move extern declarations from .c files to .h files
  IB/mlx4: Whitespace fix
  IB/ehca: Fix include order to better match kernel style
  mlx4_core: Remove kfree() in mlx4_mr_alloc() error flow
  RDMA/amso1100: Initialize the wait_queue_head_t in the c2_qp structure

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  modules: better error messages when modules fail to load due to a sysfs problem.
  kobject: update documentation
  kset: kernel-doc cleanups
  driver core: revert "device" link creation check
  stable_api_nonsense.txt: Disambiguate the use of "this" by using "that" to refer to the syscall interface
  Fix Doc/sysfs-rules typos
  kernel-doc fixes for PCI and drivers/base/
  kobject: put kobject_actions in kobject.h
  kobject: fix link error when CONFIG_HOTPLUG is disabled
  HOWTO: sync Japanese HOWTO
  HOWTO: adjust translation header of Japanese stable_api_nonsense.txt

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: "sparse" cleanups for usb gadgets
  usb-serial: Fix edgeport regression on non-EPiC devices
  USB: more pxa2xx_udc dead code removal
  USB: NIKON D50 is an unusual device
  USB: drivers/usb/serial/sierra.c: make 3 functions static
  USB: fix BUG: sleeping function called from invalid context at /home/jeremy/hg/xen/paravirt/linux/drivers/usb/core/urb.c:524, in_atomic():1, irqs_disabled():0
  USB: mct_u232: Convert to proper speed handling API
  digi_acceleport: Drag the driver kicking and screaming into coding style
  cp2101: Remove broken termios optimisation, use proper speed API
  USB: Fix a bug in usb_start_wait_urb
  USB: fix scatterlist PIO case (IOMMU)
  USB: fix usb_serial_suspend(): buggy code
  USB: yet another quirky device
  USB: Add CanonScan LiDE30 to the quirk list
  USB: even more quirks
  USB: usb.h kernel-doc additions
  USB: more quirky devices
  USB: Don't let usb-storage steal Blackberry Pearl
  USB: devices misc: Trivial patch to build the IOWARRIOR when it is selected in Kconfig

This helps people when debugging problems like the ones that were in the
recent -mm releases.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Update kobject documentation:

- Update structure definitions.
- Remove documentation of removed struct subsystem.

(First shot, uevent_ops probably need some documentation as well.)
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Removed kernel-doc marker (/**) from struct kset -- each struct member
still needs annotation.

Corrected one parameter name so that kernel-doc matches the macro.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

driver core: revert "device" link creation check

Commit 2ee97caf introduced an extra
check on when to create the "device" symlink. Unfortunately, this
breaks input, so let's revert to the old behaviour.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

stable_api_nonsense.txt: Disambiguate the use of "this" by using "that" to refer to the syscall interface
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix typos only (spelling, grammar, duplicate words, etc.).
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix undocumented function parameters in PCI and drivers/base.

Warning(linux-2.6.23-rc1//drivers/pci/pci.c:1526): No description found for parameter 'rq'
Warning(linux-2.6.23-rc1//drivers/base/firmware_class.c:245): No description found for parameter 'bin_attr'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This prevents the extern declaration in the driver core.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Leaving kobject_actions[] in kobject_uevent.c, but putting it outside
the #ifdef looks indeed like the best solution to me. This way, we
avoid adding #ifdef CONFIG_HOTPLUG into core.c, when all other
functions called do not need such a thing.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NTsugikazu Shibata <tshibata@ab.jp.nec.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NIKEDA, Munehiro <m-ikeda@ds.jp.nec.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This removes complaints about the gadget stack which are generated by
the currrent "sparse":  it doesn't like the fact that zero is the null
pointer.  (Last I checked, C guarantees that's correct ...)
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix serious regression on non-EPiC edgeport usb-serial devices. Baud
rate and MCR/LCR registers are not being written on these models due
to apparent copy-n-paste errors introduced with EPiC support.

Failure reported by Nick Pasich <Nick@NickAndBarb.net>.
Signed-off-by: NAdam Kropelin <akropel1@rochester.rr.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove some more dead code from the pxa2xx_udc driver:  support
for a no-longer-undocumented hardware "test mode".  Newer chips
made this the default, evidently as the best workaround for deep
silicon bugs.  The interest was that this seemed to be the only
way to kick in the (documented!) double buffering capability.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This short patch allows NIKON D50 to be mounted as UMS[unusual device]
on Linux niam 2.6.22-rc7-cfs-v18 #2 PREEMPT Tue Jul 3 22:35:53 EEST
2007 i686 Intel(R) Celeron(R) M processor 1.50GHz GenuineIntel
GNU/Linux,
some previous kernels...

lsusb -v
Bus 001 Device 006: ID 04b0:0409 Nikon Corp.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x04b0 Nikon Corp.
  idProduct          0x0409
  bcdDevice            1.00
  iManufacturer           1 NIKON
  iProduct                2 NIKON DSC D50
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered
Signed-off-by: NMilinevsky Dmitry <niam.niam@gmail.com>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: <caglar@pardus.org.tr>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch makes three needlessly global functions static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Kevin Lloyd <linux@sierrawireless.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB: fix BUG: sleeping function called from invalid context at /home/jeremy/hg/xen/paravirt/linux/drivers/usb/core/urb.c:524, in_atomic():1, irqs_disabled():0

Clearly there's a bug in
drivers/usb/serial/usb-serial.c:usb_serial_put().  It shouldn't call
kref_put() while holding a spinlock.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@redhat.com>
Acked-by: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- The outbreak of acute bracketitus has been cured
- The belief that brackets should have spaces everywhere likewise
- Various other coding style tweaks
- Use baud rates not Bfoo in the speed setup switch
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I've also enabled the commented out support for 7200, 14400, 55854,
127117 and 3686400 baud as you can now set such rates in the kernel.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>