- 27 1月, 2009 2 次提交
-
-
由 Jean Delvare 提交于
Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
-
由 Harvey Harrison 提交于
swab.h seems to have been missed during the header merge. Add conditionals similar to byteorder.h and remove the now unnecessary byteorder_no/mm.h Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 1月, 2009 4 次提交
-
-
由 Rakib Mullick 提交于
Here function vmi_activate calls a init function activate_vmi , which causes the following section mismatch warnings: LD arch/x86/kernel/built-in.o WARNING: arch/x86/kernel/built-in.o(.text+0x13ba9): Section mismatch in reference from the function vmi_activate() to the function .init.text:vmi_time_init() The function vmi_activate() references the function __init vmi_time_init(). This is often because vmi_activate lacks a __init annotation or the annotation of vmi_time_init is wrong. WARNING: arch/x86/kernel/built-in.o(.text+0x13bd1): Section mismatch in reference from the function vmi_activate() to the function .devinit.text:vmi_time_bsp_init() The function vmi_activate() references the function __devinit vmi_time_bsp_init(). This is often because vmi_activate lacks a __devinit annotation or the annotation of vmi_time_bsp_init is wrong. WARNING: arch/x86/kernel/built-in.o(.text+0x13bdb): Section mismatch in reference from the function vmi_activate() to the function .devinit.text:vmi_time_ap_init() The function vmi_activate() references the function __devinit vmi_time_ap_init(). This is often because vmi_activate lacks a __devinit annotation or the annotation of vmi_time_ap_init is wrong. Fix it by marking vmi_activate() as __init too. Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: fix boot hang on pre-model-15 Intel CPUs rdmsrl_safe() does not work in very early bootup code yet, because we dont have the pagefault handler installed yet so exception section does not get parsed. rdmsr_safe() will just crash and hang the bootup. So limit the MSR_IA32_MISC_ENABLE MSR read to those CPU types that support it. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Eric Anholt 提交于
In the absence of PAT, PAGE_KERNEL_WC ends up mapping to a memory type that gets UC behavior even in the presence of a WC MTRR covering the area in question. By swapping to PAGE_KERNEL_UC_MINUS, we can get the actual behavior the caller wanted (WC if you can manage it, UC otherwise). This recovers the 40% performance improvement of using WC in the DRM to upload vertex data. Signed-off-by: NEric Anholt <eric@anholt.net> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Russell King 提交于
Tomi Valkeinen reports: Running with latest linux-omap kernel on OMAP3 SDP board, I have problem with iounmap(). It looks like iounmap() does not properly free large areas. Below is a test which fails for me in 6-7 loops. for (i = 0; i < 200; ++i) { vaddr = ioremap(paddr, size); if (!vaddr) { printk("couldn't ioremap\n"); break; } iounmap(vaddr); } The changes to vmalloc.c weren't reflected in the ARM ioremap implementation. Turns out the fix is rather simple. Tested-by: NTomi Valkeinen <tomi.valkeinen@nokia.com> Tested-by: NMatt Gerassimoff <mgeras@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 25 1月, 2009 2 次提交
-
-
由 Ingo Molnar 提交于
the RDC and ELAN platforms use slighly different PIT clocks, resulting in a timex.h hack that changes PIT_TICK_RATE during build time. But if a tester enables any of these platform support .config options, the PIT will be miscalibrated on standard PC platforms. So use one frequency - in a subsequent patch we'll add a quirk to allow x86 platforms to define different PIT frequencies. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Russell King 提交于
... for devices. Doing so is a bug, plain and simple, and drives GregKH round the bend. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 24 1月, 2009 4 次提交
-
-
由 Russell King 提交于
The old matching algorithm was too fuzzy, causing false positives. For example, when asked for device D connection C1 and we only find device D connection C2, we return that as a valid match despite the connection names being different. Change the algorithm such that: An entry with a NULL ID is assumed to be a wildcard. If an entry has a device ID, it must match If an entry has a connection ID, it must match However, we maintain the order of precidence while still only doing a single pass over all entries: dev+con > dev only > con only. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 David Brownell 提交于
From: David Brownell <dbrownell@users.sourceforge.net> Subject: ARM/mach-davinci/usb.c buildfix CC arch/arm/mach-davinci/usb.o arch/arm/mach-davinci/usb.c:60: error: 'IRQ_USBINT' undeclared here (not in a function) make[1]: *** [arch/arm/mach-davinci/usb.o] Error 1 Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Which had the 'from' and 'to' pages reversed. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Peter Zijlstra 提交于
On -rt we were seeing spurious bad page states like: Bad page state in process 'firefox' page:c1bc2380 flags:0x40000000 mapping:c1bc2390 mapcount:0 count:0 Trying to fix it up, but a reboot is needed Backtrace: Pid: 503, comm: firefox Not tainted 2.6.26.8-rt13 #3 [<c043d0f3>] ? printk+0x14/0x19 [<c0272d4e>] bad_page+0x4e/0x79 [<c0273831>] free_hot_cold_page+0x5b/0x1d3 [<c02739f6>] free_hot_page+0xf/0x11 [<c0273a18>] __free_pages+0x20/0x2b [<c027d170>] __pte_alloc+0x87/0x91 [<c027d25e>] handle_mm_fault+0xe4/0x733 [<c043f680>] ? rt_mutex_down_read_trylock+0x57/0x63 [<c043f680>] ? rt_mutex_down_read_trylock+0x57/0x63 [<c0218875>] do_page_fault+0x36f/0x88a This is the case where a concurrent fault already installed the PTE and we get to free the newly allocated one. This is due to pgtable_page_ctor() doing the spin_lock_init(&page->ptl) which is overlaid with the {private, mapping} struct. union { struct { unsigned long private; struct address_space *mapping; }; spinlock_t ptl; struct kmem_cache *slab; struct page *first_page; }; Normally the spinlock is small enough to not stomp on page->mapping, but PREEMPT_RT=y has huge 'spin'locks. But lockdep kernels should also be able to trigger this splat, as the lock tracking code grows the spinlock to cover page->mapping. The obvious fix is calling pgtable_page_dtor() like the regular pte free path __pte_free_tlb() does. It seems all architectures except x86 and nm10300 already do this, and nm10300 doesn't seem to use pgtable_page_ctor(), which suggests it doesn't do SMP or simply doesnt do MMU at all or something. Signed-off-by: NPeter Zijlstra <a.p.zijlsta@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: <stable@kernel.org>
-
- 23 1月, 2009 5 次提交
-
-
由 Michael Holzheu 提交于
Add wrapper functions for the following compat system calls: * readahead * sendfile64 * tkill * tgkill * keyctl This ensures that the high order bits of the parameter registers are correctly sign extended. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Heiko Carstens 提交于
Precreate stop_machine threads in case the machine supports ETR/STP. Otherwise we might deadlock if a time sync operation gets scheduled and the creation of stop_machine threads would cause disk I/O. This is just the minimal fix. The real fix would be to only precreate stop_machine threads if ETR/STP is actually used. But that would be a rather large and complicated patch. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Heiko Carstens 提交于
On (initial) cpu hotplug the lowcore values for user_timer and system_timer don't get initialized like they would get on each process schedule. On initial start of secondary cpus this leads to the situation where per thread user/system_timer values are larger than the corresponding contents of the lowcore. When later calculating time spent in user/system context the result can be negative. So for cpu hotplug we should manually initialize lowcore values. Fixes this bug: Kernel BUG at 000ec080 [verbose debug info unavailable] fixpoint divide exception: 0009 [#1] PREEMPT SMP Modules linked in: CPU: 10 Not tainted 2.6.28 #4 Process sysctl (pid: 975, task: 3fa752e0, ksp: 3fbebca0) Krnl PSW : 070c1000 800ec080 (show_stat+0x390/0x5fc) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 Krnl GPRS: 7fffffff fefc7ce5 3faec080 003879ae 00000001 01388000 7fffffff 01388000 00000000 00000000 0049ad50 3fbebcf8 01388000 002f51a8 800ec1fe 3fbebcf8 Krnl Code: 800ec076: 9001b188 stm %r0,%r1,392(%r11) 800ec07a: 9801b0c0 lm %r0,%r1,192(%r11) 800ec07e: 1d05 dr %r0,%r5 >800ec080: 9001b0c0 stm %r0,%r1,192(%r11) 800ec084: 5860b0c4 l %r6,196(%r11) 800ec088: 1806 lr %r0,%r6 800ec08a: 8c800001 srdl %r8,1 800ec08e: 1d87 dr %r8,%r7 Call Trace: ([<00000000000ec1ee>] show_stat+0x4fe/0x5fc) [<00000000000c13e8>] seq_read+0xc4/0x3ac [<00000000000e4796>] proc_reg_read+0x6e/0x9c [<00000000000a6a44>] vfs_read+0x78/0x100 [<00000000000a6ba8>] sys_read+0x40/0x80 [<00000000000234a8>] sysc_do_restart+0x1a/0x1e Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Michael Holzheu 提交于
When 31 bit user space programs call sigaltstack on a 64 bit Linux OS, the system call returns -1 with errno=EFAULT. The 31 bit pointer passed to the system call is extended to 64 bit, but the high order bits are not set to zero. The kernel detects the invalid user space pointer and returns -EFAULT. To solve the problem, sys32_sigaltstack_wrapper() instead of sys32_sigaltstack() has to be called. The wrapper function sets the high order bits to zero. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Heiko Carstens 提交于
Use the personality() macro to mask out all bits that are not relevant for the personality type. The personality field contains bits for other things as well, so without masking out the not relevalent bits the comparison won't do what is expected. Reported-by: NAndreas Krebbel <krebbel@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
- 22 1月, 2009 5 次提交
-
-
由 Thomas Gleixner 提交于
Impact: Fix debugobjects warning debugobject enabled kernels spit out a warning in hpet code due to a workqueue which is initialized on stack. Add INIT_WORK_ON_STACK() which calls init_timer_on_stack() and use it in hpet. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 H. Peter Anvin 提交于
Impact: Fixes crashes with misconfigured BIOSes on XSAVE hardware Avuton Olrich reported early boot crashes with v2.6.28 and bisected it down to dc1e35c6 ("x86, xsave: enable xsave/xrstor on cpus with xsave support"). If the CPUID limit bit in MSR_IA32_MISC_ENABLE is set, clear it to make all CPUID information available. This is required for some features to work, in particular XSAVE. Reported-and-bisected-by: NAvuton Olrich <avuton@gmail.com> Tested-by: NAvuton Olrich <avuton@gmail.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 H. Peter Anvin 提交于
Impact: None (new bit definitions currently unused) Add bit definitions for the MSR_IA32_MISC_ENABLE MSRs to <asm/msr-index.h>. Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
Beschorner Daniel reported: > hwinfo problem since 2.6.28, showing this in the oops: > Corrupted page table at address 7fd04de3ec00 Also, PaX Team reported a regression with this commit: > commit 9542ada8 > Author: Suresh Siddha <suresh.b.siddha@intel.com> > Date: Wed Sep 24 08:53:33 2008 -0700 > > x86: track memtype for RAM in page struct This commit breaks mapping any RAM page through /dev/mem, as the reserve_memtype() was not initializing the return attribute type and as such corrupting the PTE entry that was setup with the return attribute type. Because of this bug, application mapping this RAM page through /dev/mem will die with "Corrupted page table at address xxxx" message in the kernel log and also the kernel identity mapping which maps the underlying RAM page gets converted to UC. Fix this by initializing the return attribute type before calling reserve_ram_pages_type() Reported-by: NPaX Team <pageexec@freemail.hu> Reported-and-tested-by: NBeschorner Daniel <Daniel.Beschorner@facton.com> Tested-and-Acked-by: NPaX Team <pageexec@freemail.hu> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Guennadi Liakhovetski 提交于
This is a framebuffer driver for i.MX31 SoCs. It only supports synchronous displays, vertical panning supported, no overlay support. Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NGuennadi Liakhovetski <lg@denx.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 21 1月, 2009 18 次提交
-
-
由 Thomas Renninger 提交于
while looking at: http://bugzilla.kernel.org/show_bug.cgi?id=11541 I realized that the mtrr.show param cannot work, because the code is processed much too early. This patch: - Declares mtrr.show as early_param - Stays consistent with the previous param (which I doubt that it ever worked), so mtrr.show=1 would still work - Declares mtrr_show as initdata Signed-off-by: NThomas Renninger <trenn@suse.de> Acked-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
Impact: fix sporadic slowdowns and warning messages This patch fixes a performance issue reported by Linus on his Nehalem system. While Linus reverted the PAT patch (commit 58dab916) which exposed the issue, existing cpa() code can potentially still cause wrong(page attribute corruption) behavior. This patch also fixes the "WARNING: at arch/x86/mm/pageattr.c:560" that various people reported. In 64bit kernel, kernel identity mapping might have holes depending on the available memory and how e820 reports the address range covering the RAM, ACPI, PCI reserved regions. If there is a 2MB/1GB hole in the address range that is not listed by e820 entries, kernel identity mapping will have a corresponding hole in its 1-1 identity mapping. If cpa() happens on the kernel identity mapping which falls into these holes, existing code fails like this: __change_page_attr_set_clr() __change_page_attr() returns 0 because of if (!kpte). But doesn't set cpa->numpages and cpa->pfn. cpa_process_alias() uses uninitialized cpa->pfn (random value) which can potentially lead to changing the page attribute of kernel text/data, kernel identity mapping of RAM pages etc. oops! This bug was easily exposed by another PAT patch which was doing cpa() more often on kernel identity mapping holes (physical range between max_low_pfn_mapped and 4GB), where in here it was setting the cache disable attribute(PCD) for kernel identity mappings aswell. Fix cpa() to handle the kernel identity mapping holes. Retain the WARN() for cpa() calls to other not present address ranges (kernel-text/data, ioremap() addresses) Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: <stable@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 SUGIOKA Toshinobu 提交于
unaligned and nonexistent address causes wrong exception handling in traps_32.c(handle_unaligned_access). 'handle_unalinged_ins' should return -EFAULT if address error is fixed up with kernel exception table, otherwise 'handle_unaligned_access' increases already fixed program counter and then crash. for example ioctl(fd, TCGETA, (struct termio *)-1) never return and stay in TASK_UNINTERRUPTIBLE state forever in my kernel. Signed-off-by: NSUGIOKA Toshinobu <sugioka@itonet.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch exports the sh7343 JPU to user space using uio_pdrv_genirq, very similar to the sh7722 JPU patch by Hayama-san. While at it fix up the end of the sh7722 JPU iomem resource. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
ISA can go away now that the hd6446x PCMCIA drivers no longer exist in-tree. The rationale for enabling CONFIG_ISA in the first place is likewise no longer valid given that the subsystem has changed since the time that assertion was valid. While we are at it, kill off SBUS, MCA, EISA, and so on. These are not supported and never will be. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
More build fixes.. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch adds CN9 MMC support for MigoR using the mmc_spi driver on top of the bitbanging spi_gpio driver. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Ingo Molnar 提交于
This reverts commit 4217458d. Justin Madru bisected this commit, it was causing weird Firefox crashes. The reason is that GCC mis-optimizes (re-uses) the on-stack parameters of the calling frame, which corrupts the syscall return pt_regs state and thus corrupts user-space register state. So we go back to the slightly less clean but more optimization-safe method of getting to pt_regs. Also add a comment to explain this. Resolves: http://bugzilla.kernel.org/show_bug.cgi?id=12505Reported-and-bisected-by: NJustin Madru <jdm64@gawab.com> Tested-by: NJustin Madru <jdm64@gawab.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andi Kleen 提交于
Impact: fix rare (but currently harmless) miscompile with certain configs and gcc versions Hugh Dickins noticed that strncpy_from_user() was miscompiled in some circumstances with gcc 4.3. Thanks to Hugh's excellent analysis it was easy to track down. Hugh writes: > Try building an x86_64 defconfig 2.6.29-rc1 kernel tree, > except not quite defconfig, switch CONFIG_PREEMPT_NONE=y > and CONFIG_PREEMPT_VOLUNTARY off (because it expands a > might_fault() there, which hides the issue): using a > gcc 4.3.2 (I've checked both openSUSE 11.1 and Fedora 10). > > It generates the following: > > 0000000000000000 <__strncpy_from_user>: > 0: 48 89 d1 mov %rdx,%rcx > 3: 48 85 c9 test %rcx,%rcx > 6: 74 0e je 16 <__strncpy_from_user+0x16> > 8: ac lods %ds:(%rsi),%al > 9: aa stos %al,%es:(%rdi) > a: 84 c0 test %al,%al > c: 74 05 je 13 <__strncpy_from_user+0x13> > e: 48 ff c9 dec %rcx > 11: 75 f5 jne 8 <__strncpy_from_user+0x8> > 13: 48 29 c9 sub %rcx,%rcx > 16: 48 89 c8 mov %rcx,%rax > 19: c3 retq > > Observe that "sub %rcx,%rcx; mov %rcx,%rax", whereas gcc 4.2.1 > (and many other configs) say "sub %rcx,%rdx; mov %rdx,%rax". > Isn't it returning 0 when it ought to be returning strlen? The asm constraints for the strncpy_from_user() result were missing an early clobber, which tells gcc that the last output arguments are written before all input arguments are read. Also add more early clobbers in the rest of the file and fix 32-bit usercopy.c in the same way. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> [ since this API is rarely used and no in-kernel user relies on a 'len' return value (they only rely on negative return values) this miscompile was never noticed in the field. But it's worth fixing it nevertheless. ] Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Magnus Damm 提交于
This patch adds CN3 MMC support for ap325rxa using the mmc_spi driver on top of the bitbanging spi_gpio driver. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Since commit ba84be23 ("remove linux/hardirq.h from asm-generic/local.h"), the asm/irq.h definitions that mach-x3proto/setup.c depends on are no longer available, causing the build to die. So, include linux/irq.h explicitly. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Brings it in line with the SH implementation, the BKL is not necessary here. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Steve Glendinning 提交于
Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Steve Glendinning 提交于
Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Steve Glendinning 提交于
Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Migo-R can use ov772x camera driver in Linux 2.6.29. Therefore, soc_camera_platform setting is no longer needed. This patch removes it. Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-