Memory.high limit is implemented in a way such that the kernel penalizes
all threads which are allocating a memory over the limit.  Forcing all
threads into the synchronous reclaim and adding some artificial delays
allows to slow down the memory consumption and potentially give some time
for userspace oom handlers/resource control agents to react.

It works nicely if the memory usage is hitting the limit from below,
however it works sub-optimal if a user adjusts memory.high to a value way
below the current memory usage.  It basically forces all workload threads
(doing any memory allocations) into the synchronous reclaim and sleep.
This makes the workload completely unresponsive for a long period of time
and can also lead to a system-wide contention on lru locks.  It can happen
even if the workload is not actually tight on memory and has, for example,
a ton of cold pagecache.

In the current implementation writing to memory.high causes an atomic
update of page counter's high value followed by an attempt to reclaim
enough memory to fit into the new limit.  To fix the problem described
above, all we need is to change the order of execution: try to push the
memory usage under the limit first, and only then set the new high limit.
Reported-by: NDomas Mituzas <domas@fb.com>
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Chris Down <chris@chrisdown.name>
Link: http://lkml.kernel.org/r/20200709194718.189231-1-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently memcg_kmem_enabled() is optimized for the kernel memory
accounting being off.  It was so for a long time, and arguably the reason
behind was that the kernel memory accounting was initially an opt-in
feature.  However, now it's on by default on both cgroup v1 and cgroup v2,
and it's on for all cgroups.  So let's switch over to
static_branch_likely() to reflect this fact.

Unlikely there is a significant performance difference, as the cost of a
memory allocation and its accounting significantly exceeds the cost of a
jump.  However, the conversion makes the code look more logically.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200707173612.124425-3-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

charge_slab_page() and uncharge_slab_page() are not related anymore to
memcg charging and uncharging.  In order to make their names less
confusing, let's rename them to account_slab_page() and
unaccount_slab_page() respectively.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200707173612.124425-2-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

charge_slab_page() is not using the gfp argument anymore,
remove it.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200707173612.124425-1-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently the kernel stack is being accounted per-zone.  There is no need
to do that.  In addition due to being per-zone, memcg has to keep a
separate MEMCG_KERNEL_STACK_KB.  Make the stat per-node and deprecate
MEMCG_KERNEL_STACK_KB as memcg_stat_item is an extension of
node_stat_item.  In addition localize the kernel stack stats updates to
account_kernel_stack().
Signed-off-by: NShakeel Butt <shakeelb@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NRoman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200630161539.1759185-1-shakeelb@google.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a drgn-based tool to display slab information for a given memcg.  Can
replace cgroup v1 memory.kmem.slabinfo interface on cgroup v2, but in a
more flexiable way.

Currently supports only SLUB configuration, but SLAB can be trivially
added later.

Output example:
$ sudo ./tools/cgroup/memcg_slabinfo.py /sys/fs/cgroup/user.slice/user-111017.slice/user\@111017.service
shmem_inode_cache     92     92    704   46    8 : tunables    0    0    0 : slabdata      2      2      0
eventpoll_pwq         56     56     72   56    1 : tunables    0    0    0 : slabdata      1      1      0
eventpoll_epi         32     32    128   32    1 : tunables    0    0    0 : slabdata      1      1      0
kmalloc-8              0      0      8  512    1 : tunables    0    0    0 : slabdata      0      0      0
kmalloc-96             0      0     96   42    1 : tunables    0    0    0 : slabdata      0      0      0
kmalloc-2048           0      0   2048   16    8 : tunables    0    0    0 : slabdata      0      0      0
kmalloc-64           128    128     64   64    1 : tunables    0    0    0 : slabdata      2      2      0
mm_struct            160    160   1024   32    8 : tunables    0    0    0 : slabdata      5      5      0
signal_cache          96     96   1024   32    8 : tunables    0    0    0 : slabdata      3      3      0
sighand_cache         45     45   2112   15    8 : tunables    0    0    0 : slabdata      3      3      0
files_cache          138    138    704   46    8 : tunables    0    0    0 : slabdata      3      3      0
task_delay_info      153    153     80   51    1 : tunables    0    0    0 : slabdata      3      3      0
task_struct           27     27   3520    9    8 : tunables    0    0    0 : slabdata      3      3      0
radix_tree_node       56     56    584   28    4 : tunables    0    0    0 : slabdata      2      2      0
btrfs_inode          140    140   1136   28    8 : tunables    0    0    0 : slabdata      5      5      0
kmalloc-1024          64     64   1024   32    8 : tunables    0    0    0 : slabdata      2      2      0
kmalloc-192           84     84    192   42    2 : tunables    0    0    0 : slabdata      2      2      0
inode_cache           54     54    600   27    4 : tunables    0    0    0 : slabdata      2      2      0
kmalloc-128            0      0    128   32    1 : tunables    0    0    0 : slabdata      0      0      0
kmalloc-512           32     32    512   32    4 : tunables    0    0    0 : slabdata      1      1      0
skbuff_head_cache     32     32    256   32    2 : tunables    0    0    0 : slabdata      1      1      0
sock_inode_cache      46     46    704   46    8 : tunables    0    0    0 : slabdata      1      1      0
cred_jar             378    378    192   42    2 : tunables    0    0    0 : slabdata      9      9      0
proc_inode_cache      96     96    672   24    4 : tunables    0    0    0 : slabdata      4      4      0
dentry               336    336    192   42    2 : tunables    0    0    0 : slabdata      8      8      0
filp                 697    864    256   32    2 : tunables    0    0    0 : slabdata     27     27      0
anon_vma             644    644     88   46    1 : tunables    0    0    0 : slabdata     14     14      0
pid                 1408   1408     64   64    1 : tunables    0    0    0 : slabdata     22     22      0
vm_area_struct      1200   1200    200   40    2 : tunables    0    0    0 : slabdata     30     30      0
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200623174037.3951353-20-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add some tests to cover the kernel memory accounting functionality.  These
are covering some issues (and changes) we had recently.

1) A test which allocates a lot of negative dentries, checks memcg slab
   statistics, creates memory pressure by setting memory.max to some low
   value and checks that some number of slabs was reclaimed.

2) A test which covers side effects of memcg destruction: it creates
   and destroys a large number of sub-cgroups, each containing a
   multi-threaded workload which allocates and releases some kernel
   memory.  Then it checks that the charge ans memory.stats do add up on
   the parent level.

3) A test which reads /proc/kpagecgroup and implicitly checks that it
   doesn't crash the system.

4) A test which spawns a large number of threads and checks that the
   kernel stacks accounting works as expected.

5) A test which checks that living charged slab objects are not
   preventing the memory cgroup from being released after being deleted by
   a user.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200623174037.3951353-19-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of having two sets of kmem_caches: one for system-wide and
non-accounted allocations and the second one shared by all accounted
allocations, we can use just one.

The idea is simple: space for obj_cgroup metadata can be allocated on
demand and filled only for accounted allocations.

It allows to remove a bunch of code which is required to handle kmem_cache
clones for accounted allocations.  There is no more need to create them,
accumulate statistics, propagate attributes, etc.  It's a quite
significant simplification.

Also, because the total number of slab_caches is reduced almost twice (not
all kmem_caches have a memcg clone), some additional memory savings are
expected.  On my devvm it additionally saves about 3.5% of slab memory.

[guro@fb.com: fix build on MIPS]
  Link: http://lkml.kernel.org/r/20200717214810.3733082-1-guro@fb.comSuggested-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-18-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memcg_accumulate_slabinfo() is never called with a non-root kmem_cache as
a first argument, so the is_root_cache(s) check is redundant and can be
removed without any functional change.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-17-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently there are two lists of kmem_caches:
1) slab_caches, which contains all kmem_caches,
2) slab_root_caches, which contains only root kmem_caches.

And there is some preprocessor magic to have a single list if
CONFIG_MEMCG_KMEM isn't enabled.

It was required earlier because the number of non-root kmem_caches was
proportional to the number of memory cgroups and could reach really big
values.  Now, when it cannot exceed the number of root kmem_caches, there
is really no reason to maintain two lists.

We never iterate over the slab_root_caches list on any hot paths, so it's
perfectly fine to iterate over slab_caches and filter out non-root
kmem_caches.

It allows to remove a lot of config-dependent code and two pointers from
the kmem_cache structure.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-16-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The memcg_kmem_get_cache() function became really trivial, so let's just
inline it into the single call point: memcg_slab_pre_alloc_hook().

It will make the code less bulky and can also help the compiler to
generate a better code.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-15-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Because the number of non-root kmem_caches doesn't depend on the number of
memory cgroups anymore and is generally not very big, there is no more
need for a dedicated workqueue.

Also, as there is no more need to pass any arguments to the
memcg_create_kmem_cache() except the root kmem_cache, it's possible to
just embed the work structure into the kmem_cache and avoid the dynamic
allocation of the work structure.

This will also simplify the synchronization: for each root kmem_cache
there is only one work.  So there will be no more concurrent attempts to
create a non-root kmem_cache for a root kmem_cache: the second and all
following attempts to queue the work will fail.

On the kmem_cache destruction path there is no more need to call the
expensive flush_workqueue() and wait for all pending works to be finished.
Instead, cancel_work_sync() can be used to cancel/wait for only one work.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-14-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is fairly big but mostly red patch, which makes all accounted slab
allocations use a single set of kmem_caches instead of creating a separate
set for each memory cgroup.

Because the number of non-root kmem_caches is now capped by the number of
root kmem_caches, there is no need to shrink or destroy them prematurely.
They can be perfectly destroyed together with their root counterparts.
This allows to dramatically simplify the management of non-root
kmem_caches and delete a ton of code.

This patch performs the following changes:
1) introduces memcg_params.memcg_cache pointer to represent the
   kmem_cache which will be used for all non-root allocations
2) reuses the existing memcg kmem_cache creation mechanism
   to create memcg kmem_cache on the first allocation attempt
3) memcg kmem_caches are named <kmemcache_name>-memcg,
   e.g. dentry-memcg
4) simplifies memcg_kmem_get_cache() to just return memcg kmem_cache
   or schedule it's creation and return the root cache
5) removes almost all non-root kmem_cache management code
   (separate refcounter, reparenting, shrinking, etc)
6) makes slab debugfs to display root_mem_cgroup css id and never
   show :dead and :deact flags in the memcg_slabinfo attribute.

Following patches in the series will simplify the kmem_cache creation.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-13-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To make the memcg_kmem_bypass() function available outside of the
memcontrol.c, let's move it to memcontrol.h.  The function is small and
nicely fits into static inline sort of functions.

It will be used from the slab code.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-12-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Deprecate memory.kmem.slabinfo.

An empty file will be presented if corresponding config options are
enabled.

The interface is implementation dependent, isn't present in cgroup v2, and
is generally useful only for core mm debugging purposes.  In other words,
it doesn't provide any value for the absolute majority of users.

A drgn-based replacement can be found in
tools/cgroup/memcg_slabinfo.py.  It does support cgroup v1 and v2,
mimics memory.kmem.slabinfo output and also allows to get any
additional information without a need to recompile the kernel.

If a drgn-based solution is too slow for a task, a bpf-based tracing tool
can be used, which can easily keep track of all slab allocations belonging
to a memory cgroup.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-11-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch to per-object accounting of non-root slab objects.

Charging is performed using obj_cgroup API in the pre_alloc hook.
Obj_cgroup is charged with the size of the object and the size of
metadata: as now it's the size of an obj_cgroup pointer.  If the amount of
memory has been charged successfully, the actual allocation code is
executed.  Otherwise, -ENOMEM is returned.

In the post_alloc hook if the actual allocation succeeded, corresponding
vmstats are bumped and the obj_cgroup pointer is saved.  Otherwise, the
charge is canceled.

On the free path obj_cgroup pointer is obtained and used to uncharge the
size of the releasing object.

Memcg and lruvec counters are now representing only memory used by active
slab objects and do not include the free space.  The free space is shared
and doesn't belong to any specific cgroup.

Global per-node slab vmstats are still modified from
(un)charge_slab_page() functions.  The idea is to keep all slab pages
accounted as slab pages on system level.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-10-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Store the obj_cgroup pointer in the corresponding place of
page->obj_cgroups for each allocated non-root slab object.  Make sure that
each allocated object holds a reference to obj_cgroup.

Objcg pointer is obtained from the memcg->objcg dereferencing in
memcg_kmem_get_cache() and passed from pre_alloc_hook to post_alloc_hook.
Then in case of successful allocation(s) it's getting stored in the
page->obj_cgroups vector.

The objcg obtaining part look a bit bulky now, but it will be simplified
by next commits in the series.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-9-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allocate and release memory to store obj_cgroup pointers for each non-root
slab page. Reuse page->mem_cgroup pointer to store a pointer to the
allocated space.

This commit temporarily increases the memory footprint of the kernel memory
accounting. To store obj_cgroup pointers we'll need a place for an
objcg_pointer for each allocated object. However, the following patches
in the series will enable sharing of slab pages between memory cgroups,
which will dramatically increase the total slab utilization. And the final
memory footprint will be significantly smaller than before.

To distinguish between obj_cgroups and memcg pointers in case when it's
not obvious which one is used (as in page_cgroup_ino()), let's always set
the lowest bit in the obj_cgroup case. The original obj_cgroups
pointer is marked to be ignored by kmemleak, which otherwise would
report a memory leak for each allocated vector.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-8-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Obj_cgroup API provides an ability to account sub-page sized kernel
objects, which potentially outlive the original memory cgroup.

The top-level API consists of the following functions:
  bool obj_cgroup_tryget(struct obj_cgroup *objcg);
  void obj_cgroup_get(struct obj_cgroup *objcg);
  void obj_cgroup_put(struct obj_cgroup *objcg);

  int obj_cgroup_charge(struct obj_cgroup *objcg, gfp_t gfp, size_t size);
  void obj_cgroup_uncharge(struct obj_cgroup *objcg, size_t size);

  struct mem_cgroup *obj_cgroup_memcg(struct obj_cgroup *objcg);
  struct obj_cgroup *get_obj_cgroup_from_current(void);

Object cgroup is basically a pointer to a memory cgroup with a per-cpu
reference counter.  It substitutes a memory cgroup in places where it's
necessary to charge a custom amount of bytes instead of pages.

All charged memory rounded down to pages is charged to the corresponding
memory cgroup using __memcg_kmem_charge().

It implements reparenting: on memcg offlining it's getting reattached to
the parent memory cgroup.  Each online memory cgroup has an associated
active object cgroup to handle new allocations and the list of all
attached object cgroups.  On offlining of a cgroup this list is reparented
and for each object cgroup in the list the memcg pointer is swapped to the
parent memory cgroup.  It prevents long-living objects from pinning the
original memory cgroup in the memory.

The implementation is based on byte-sized per-cpu stocks.  A sub-page
sized leftover is stored in an atomic field, which is a part of obj_cgroup
object.  So on cgroup offlining the leftover is automatically reparented.

memcg->objcg is rcu protected.  objcg->memcg is a raw pointer, which is
always pointing at a memory cgroup, but can be atomically swapped to the
parent memory cgroup.  So a user must ensure the lifetime of the
cgroup, e.g.  grab rcu_read_lock or css_set_lock.
Suggested-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200623174037.3951353-7-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The reference counting of a memcg is currently coupled directly to how
many 4k pages are charged to it.  This doesn't work well with Roman's new
slab controller, which maintains pools of objects and doesn't want to keep
an extra balance sheet for the pages backing those objects.

This unusual refcounting design (reference counts usually track pointers
to an object) is only for historical reasons: memcg used to not take any
css references and simply stalled offlining until all charges had been
reparented and the page counters had dropped to zero.  When we got rid of
the reparenting requirement, the simple mechanical translation was to take
a reference for every charge.

More historical context can be found in commit e8ea14cc ("mm:
memcontrol: take a css reference for each charged page"), commit
64f21993 ("mm: memcontrol: remove obsolete kmemcg pinning tricks") and
commit b2052564 ("mm: memcontrol: continue cache reclaim from offlined
groups").

The new slab controller exposes the limitations in this scheme, so let's
switch it to a more idiomatic reference counting model based on actual
kernel pointers to the memcg:

- The per-cpu stock holds a reference to the memcg its caching

- User pages hold a reference for their page->mem_cgroup. Transparent
  huge pages will no longer acquire tail references in advance, we'll
  get them if needed during the split.

- Kernel pages hold a reference for their page->mem_cgroup

- Pages allocated in the root cgroup will acquire and release css
  references for simplicity. css_get() and css_put() optimize that.

- The current memcg_charge_slab() already hacked around the per-charge
  references; this change gets rid of that as well.

- tcp accounting will handle reference in mem_cgroup_sk_{alloc,free}

Roman:
1) Rebased on top of the current mm tree: added css_get() in
   mem_cgroup_charge(), dropped mem_cgroup_try_charge() part
2) I've reformatted commit references in the commit log to make
   checkpatch.pl happy.

[hughd@google.com: remove css_put_many() from __mem_cgroup_clear_mc()]
  Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2007302011450.2347@eggly.anvilsSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200623174037.3951353-6-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This commit implements SLUB version of the obj_to_index() function, which
will be required to calculate the offset of obj_cgroup in the obj_cgroups
vector to store/obtain the objcg ownership data.

To make it faster, let's repeat the SLAB's trick introduced by commit
6a2d7a95 ("SLAB: use a multiply instead of a divide in
obj_to_index()") and avoid an expensive division.

Vlastimil Babka noticed, that SLUB does have already a similar function
called slab_index(), which is defined only if SLUB_DEBUG is enabled.  The
function does a similar math, but with a division, and it also takes a
page address instead of a page pointer.

Let's remove slab_index() and replace it with the new helper
__obj_to_index(), which takes a page address.  obj_to_index() will be a
simple wrapper taking a page pointer and passing page_address(page) into
__obj_to_index().
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-5-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In order to prepare for per-object slab memory accounting, convert
NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE vmstat items to bytes.

To make it obvious, rename them to NR_SLAB_RECLAIMABLE_B and
NR_SLAB_UNRECLAIMABLE_B (similar to NR_KERNEL_STACK_KB).

Internally global and per-node counters are stored in pages, however memcg
and lruvec counters are stored in bytes.  This scheme may look weird, but
only for now.  As soon as slab pages will be shared between multiple
cgroups, global and node counters will reflect the total number of slab
pages.  However memcg and lruvec counters will be used for per-memcg slab
memory tracking, which will take separate kernel objects in the account.
Keeping global and node counters in pages helps to avoid additional
overhead.

The size of slab memory shouldn't exceed 4Gb on 32-bit machines, so it
will fit into atomic_long_t we use for vmstats.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-4-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To implement per-object slab memory accounting, we need to convert slab
vmstat counters to bytes.  Actually, out of 4 levels of counters: global,
per-node, per-memcg and per-lruvec only two last levels will require
byte-sized counters.  It's because global and per-node counters will be
counting the number of slab pages, and per-memcg and per-lruvec will be
counting the amount of memory taken by charged slab objects.

Converting all vmstat counters to bytes or even all slab counters to bytes
would introduce an additional overhead.  So instead let's store global and
per-node counters in pages, and memcg and lruvec counters in bytes.

To make the API clean all access helpers (both on the read and write
sides) are dealing with bytes.

To avoid back-and-forth conversions a new flavor of read-side helpers is
introduced, which always returns values in pages: node_page_state_pages()
and global_node_page_state_pages().

Actually new helpers are just reading raw values.  Old helpers are simple
wrappers, which will complain on an attempt to read byte value, because at
the moment no one actually needs bytes.

Thanks to Johannes Weiner for the idea of having the byte-sized API on top
of the page-sized internal storage.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-3-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "The new cgroup slab memory controller", v7.

The patchset moves the accounting from the page level to the object level.
It allows to share slab pages between memory cgroups.  This leads to a
significant win in the slab utilization (up to 45%) and the corresponding
drop in the total kernel memory footprint.  The reduced number of
unmovable slab pages should also have a positive effect on the memory
fragmentation.

The patchset makes the slab accounting code simpler: there is no more need
in the complicated dynamic creation and destruction of per-cgroup slab
caches, all memory cgroups use a global set of shared slab caches.  The
lifetime of slab caches is not more connected to the lifetime of memory
cgroups.

The more precise accounting does require more CPU, however in practice the
difference seems to be negligible.  We've been using the new slab
controller in Facebook production for several months with different
workloads and haven't seen any noticeable regressions.  What we've seen
were memory savings in order of 1 GB per host (it varied heavily depending
on the actual workload, size of RAM, number of CPUs, memory pressure,
etc).

The third version of the patchset added yet another step towards the
simplification of the code: sharing of slab caches between accounted and
non-accounted allocations.  It comes with significant upsides (most
noticeable, a complete elimination of dynamic slab caches creation) but
not without some regression risks, so this change sits on top of the
patchset and is not completely merged in.  So in the unlikely event of a
noticeable performance regression it can be reverted separately.

The slab memory accounting works in exactly the same way for SLAB and
SLUB.  With both allocators the new controller shows significant memory
savings, with SLUB the difference is bigger.  On my 16-core desktop
machine running Fedora 32 the size of the slab memory measured after the
start of the system was lower by 58% and 38% with SLUB and SLAB
correspondingly.

As an estimation of a potential CPU overhead, below are results of
slab_bulk_test01 test, kindly provided by Jesper D.  Brouer.  He also
helped with the evaluation of results.

The test can be found here: https://github.com/netoptimizer/prototype-kernel/
The smallest number in each row should be picked for a comparison.

SLUB-patched - bulk-API
 - SLUB-patched : bulk_quick_reuse objects=1 : 187 -  90 - 224  cycles(tsc)
 - SLUB-patched : bulk_quick_reuse objects=2 : 110 -  53 - 133  cycles(tsc)
 - SLUB-patched : bulk_quick_reuse objects=3 :  88 -  95 -  42  cycles(tsc)
 - SLUB-patched : bulk_quick_reuse objects=4 :  91 -  85 -  36  cycles(tsc)
 - SLUB-patched : bulk_quick_reuse objects=8 :  32 -  66 -  32  cycles(tsc)

SLUB-original -  bulk-API
 - SLUB-original: bulk_quick_reuse objects=1 :  87 -  87 - 142  cycles(tsc)
 - SLUB-original: bulk_quick_reuse objects=2 :  52 -  53 -  53  cycles(tsc)
 - SLUB-original: bulk_quick_reuse objects=3 :  42 -  42 -  91  cycles(tsc)
 - SLUB-original: bulk_quick_reuse objects=4 :  91 -  37 -  37  cycles(tsc)
 - SLUB-original: bulk_quick_reuse objects=8 :  31 -  79 -  76  cycles(tsc)

SLAB-patched -  bulk-API
 - SLAB-patched : bulk_quick_reuse objects=1 :  67 -  67 - 140  cycles(tsc)
 - SLAB-patched : bulk_quick_reuse objects=2 :  55 -  46 -  46  cycles(tsc)
 - SLAB-patched : bulk_quick_reuse objects=3 :  93 -  94 -  39  cycles(tsc)
 - SLAB-patched : bulk_quick_reuse objects=4 :  35 -  88 -  85  cycles(tsc)
 - SLAB-patched : bulk_quick_reuse objects=8 :  30 -  30 -  30  cycles(tsc)

SLAB-original-  bulk-API
 - SLAB-original: bulk_quick_reuse objects=1 : 143 - 136 -  67  cycles(tsc)
 - SLAB-original: bulk_quick_reuse objects=2 :  45 -  46 -  46  cycles(tsc)
 - SLAB-original: bulk_quick_reuse objects=3 :  38 -  39 -  39  cycles(tsc)
 - SLAB-original: bulk_quick_reuse objects=4 :  35 -  87 -  87  cycles(tsc)
 - SLAB-original: bulk_quick_reuse objects=8 :  29 -  66 -  30  cycles(tsc)

This patch (of 19):

To convert memcg and lruvec slab counters to bytes there must be a way to
change these counters without touching node counters.  Factor out
__mod_memcg_lruvec_state() out of __mod_lruvec_state().
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-1-guro@fb.com
Link: http://lkml.kernel.org/r/20200623174037.3951353-2-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Historically the kernel memory accounting was an opt-in feature, which
could be enabled for individual cgroups.  But now it's not true, and it's
on by default both on cgroup v1 and cgroup v2.  And as long as a user has
at least one non-root memory cgroup, the kernel memory accounting is on.
So in most setups it's either always on (if memory cgroups are in use and
kmem accounting is not disabled), either always off (otherwise).

memcg_kmem_enabled() is used in many places to guard the kernel memory
accounting code.  If memcg_kmem_enabled() can reverse from returning true
to returning false (as now), we can't rely on it on release paths and have
to check if it was on before.

If we'll make memcg_kmem_enabled() irreversible (always returning true
after returning it for the first time), it'll make the general logic more
simple and robust.  It also will allow to guard some checks which
otherwise would stay unguarded.
Reported-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Tested-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200702180926.1330769-1-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The default is still set to inode32 for backwards compatibility, but
system administrators can opt in to the new 64-bit inode numbers by
either:

1. Passing inode64 on the command line when mounting, or
2. Configuring the kernel with CONFIG_TMPFS_INODE64=y

The inode64 and inode32 names are used based on existing precedent from
XFS.

[hughd@google.com: Kconfig fixes]
  Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008011928010.13320@eggly.anvilsSigned-off-by: NChris Down <chris@chrisdown.name>
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NAmir Goldstein <amir73il@gmail.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/8b23758d0c66b5e2263e08baf9c4b6a7565cbd8f.1594661218.git.chris@chrisdown.nameSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "tmpfs: inode: Reduce risk of inum overflow", v7.

In Facebook production we are seeing heavy i_ino wraparounds on tmpfs.  On
affected tiers, in excess of 10% of hosts show multiple files with
different content and the same inode number, with some servers even having
as many as 150 duplicated inode numbers with differing file content.

This causes actual, tangible problems in production.  For example, we have
complaints from those working on remote caches that their application is
reporting cache corruptions because it uses (device, inodenum) to
establish the identity of a particular cache object, but because it's not
unique any more, the application refuses to continue and reports cache
corruption.  Even worse, sometimes applications may not even detect the
corruption but may continue anyway, causing phantom and hard to debug
behaviour.

In general, userspace applications expect that (device, inodenum) should
be enough to be uniquely point to one inode, which seems fair enough.  One
might also need to check the generation, but in this case:

1. That's not currently exposed to userspace
   (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs);
2. Even with generation, there shouldn't be two live inodes with the
   same inode number on one device.

In order to mitigate this, we take a two-pronged approach:

1. Moving inum generation from being global to per-sb for tmpfs. This
   itself allows some reduction in i_ino churn. This works on both 64-
   and 32- bit machines.
2. Adding inode{64,32} for tmpfs. This fix is supported on machines with
   64-bit ino_t only: we allow users to mount tmpfs with a new inode64
   option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64.

You can see how this compares to previous related patches which didn't
implement this per-superblock:

- https://patchwork.kernel.org/patch/11254001/
- https://patchwork.kernel.org/patch/11023915/

This patch (of 2):

get_next_ino has a number of problems:

- It uses and returns a uint, which is susceptible to become overflowed
  if a lot of volatile inodes that use get_next_ino are created.
- It's global, with no specificity per-sb or even per-filesystem. This
  means it's not that difficult to cause inode number wraparounds on a
  single device, which can result in having multiple distinct inodes
  with the same inode number.

This patch adds a per-superblock counter that mitigates the second case.
This design also allows us to later have a specific i_ino size per-device,
for example, allowing users to choose whether to use 32- or 64-bit inodes
for each tmpfs mount.  This is implemented in the next commit.

For internal shmem mounts which may be less tolerant to spinlock delays,
we implement a percpu batching scheme which only takes the stat_lock at
each batch boundary.
Signed-off-by: NChris Down <chris@chrisdown.name>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name
Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.nameSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

swap_readpage() does the sync io for one page, the io is not big,
normally, the io can be finished quickly, but it may take long time or
wait forever in case of io failure or discard.

This patch uses blk_io_schedule() instead of io_schedule() to avoid task
hung and crash (when set /proc/sys/kernel/hung_task_panic) when the above
exception occurs.

This is similar to the hung task avoidance in submit_bio_wait(),
blk_execute_rq() and __blkdev_direct_IO().
Signed-off-by: NXianting Tian <xianting_tian@126.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/1596461807-21087-1-git-send-email-xianting_tian@126.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix W=1 compile warnings (invalid kerneldoc):

    mm/swap_state.c:742: warning: Function parameter or member 'fentry' not described in 'swap_vma_readahead'
    mm/swap_state.c:742: warning: Excess function parameter 'entry' description in 'swap_vma_readahead'
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200728171109.28687-2-krzk@kernel.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Because enable_swap_slots_cache can only become true in
enable_swap_slots_cache(), and depends on swap_slot_cache_initialized is
true before.  That means, when enable_swap_slots_cache is true,
swap_slot_cache_initialized is true also.

So the condition:
"swap_slot_cache_enabled && swap_slot_cache_initialized"
can be reduced to "swap_slot_cache_enabled"

And in mathematics:
"!swap_slot_cache_enabled || !swap_slot_cache_initialized"
is equal to "!(swap_slot_cache_enabled && swap_slot_cache_initialized)"

So no functional change.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NTim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20200430061143.450-4-thunder.leizhen@huawei.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Whether swap_slot_cache_initialized is true or false,
__reenable_swap_slots_cache() is always called.  To make this meaning
clear, leave only one call to __reenable_swap_slots_cache().  This also
make it clearer what extra needs be done when swap_slot_cache_initialized
is false.

No functional change.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NTim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20200430061143.450-3-thunder.leizhen@huawei.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "clean up some functions in mm/swap_slots.c".

When I studied the code of mm/swap_slots.c, I found some places can be
improved.

This patch (of 3):

Both "slots" and "slots_ret" are only need to be freed when cache already
allocated.  Make them closer, seems more clear.

No functional change.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NTim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20200430061143.450-1-thunder.leizhen@huawei.com
Link: http://lkml.kernel.org/r/20200430061143.450-2-thunder.leizhen@huawei.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The return value of populate_vma_page_range() is consistent with
__get_user_pages(), and so is the function comment of return value.
Signed-off-by: NTang Yizhou <tangyizhou@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Link: http://lkml.kernel.org/r/20200720034303.29920-1-tangyizhou@huawei.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

FGP_{WRITE|NOFS|NOWAIT} were missed in pagecache_get_page's kerneldoc
comment.
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Gang Deng <gavin.dg@linux.alibaba.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/1593031747-4249-1-git-send-email-yang.shi@linux.alibaba.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit bbddabe2 ("mm: filemap: only do access activations on
reads"), mark_page_accessed() is called for reads only.  But the idle flag
is cleared by mark_page_accessed() so the idle flag won't get cleared if
the page is write accessed only.

Basically idle page tracking is used to estimate workingset size of
workload, noticeable size of workingset might be missed if the idle flag
is not maintained correctly.

It seems good enough to just clear idle flag for write operations.

Fixes: bbddabe2 ("mm: filemap: only do access activations on reads")
Reported-by: NGang Deng <gavin.dg@linux.alibaba.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/1593020612-13051-1-git-send-email-yang.shi@linux.alibaba.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a compound page is being split while dump_page() is being run on that
page, we can end up calling compound_mapcount() on a page that is no
longer compound.  This leads to a crash (already seen at least once in the
field), due to the VM_BUG_ON_PAGE() assertion inside compound_mapcount().

(The above is from Matthew Wilcox's analysis of Qian Cai's bug report.)

A similar problem is possible, via compound_pincount() instead of
compound_mapcount().

In order to avoid this kind of crash, make dump_page() slightly more
robust, by providing a pair of simpler routines that don't contain
assertions: head_mapcount() and head_pincount().

For debug tools, we don't want to go *too* far in this direction, but this
is a simple small fix, and the crash has already been seen, so it's a good
trade-off.
Reported-by: NQian Cai <cai@lca.pw>
Suggested-by: NMatthew Wilcox <willy@infradead.org>
Signed-off-by: NJohn Hubbard <jhubbard@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: http://lkml.kernel.org/r/20200804214807.169256-1-jhubbard@nvidia.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The actual address of the struct page isn't particularly helpful, while
the hashed address helps match with other messages elsewhere.  Add the PFN
that the page refers to in order to help diagnose problems where the page
is improperly aligned for the purpose.
Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Acked-by: NMike Rapoport <rppt@linux.ibm.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: http://lkml.kernel.org/r/20200709202117.7216-7-willy@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The inode number helps correlate this page with debug messages elsewhere
in the kernel.
Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Acked-by: NMike Rapoport <rppt@linux.ibm.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: http://lkml.kernel.org/r/20200709202117.7216-6-willy@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is simpler to use than copy_from_kernel_nofault().  Also make some of
the related error messages less verbose.
Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NMike Rapoport <rppt@linux.ibm.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: http://lkml.kernel.org/r/20200709202117.7216-5-willy@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tail page flags contain very little useful information.  Print the head
page's flags instead.  While the flags will contain "head" for tail pages,
this should not be too confusing as the previous line starts with the word
"head:" and so the flags should be interpreted as belonging to the head
page.
Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Acked-by: NMike Rapoport <rppt@linux.ibm.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: http://lkml.kernel.org/r/20200709202117.7216-4-willy@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>