Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Before tyring to establish a CXN with the target, check if the adapter is in
a stable state
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Number of CID assigned to a function from adapter can be dynamic. The CID count
for each function was fixed number before. Code Fix done so that adapters with
fixed/dynamic CID count will work with the driver.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

When target send a NOP-IN with valid TTT, driver issues a NOP-OUT
and the task was not freed from driver. The task list available for
the session used to run out, and as no more task list were available
no more iSCSI commands were exchanged on that session.
This patches fixed the issue, by calling iscsi_put_task.
Signed-off-by: NMinh Tran <minhduc.tran@emulex.com>
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Check the Logical Link status also as part of the port link status.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This patch fixes the displaying of number of active
sessions in use.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The mgmt_hba_attributes structure declared was not proper and
because of that the FW response returned for the MBX_CMD was not
matching. This issue went unnoticed as mgmt_hba_attribs structure
members were never used in the code path.

This fix of displaying the FW version had to change the mgmt_hba_attrib
structure also. The latest driver will also work with the older FW as
the issue was in the driver declaration.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Fix support for DEFQ extension which will be used by latest
adapters
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Fixed the code flow based on the MACRO defined to check for
adapter.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Free CXN specific resource held by driver when login redirection
or connection retry happens. Login redirection was failing
because WRB/SGL were not allocated from the CID on which
doorbell was rung.

Fixed the issue raised by MikeC
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This patch limits the max number of msix vectors to 32.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

- Check Ready Bit before posting the BMBX Hi Address
- Fix the parameters passed to beiscsi_mccq_compl
  in beiscsi_open_conn()
- Fix tag value check in beiscsi_ep_connect.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

When MBX command fails with insufficent buffer, check for the
response lenght returned. Return success if response length
is non-zero value which indicates valid data.
Signed-off-by: NMinh Tran <minhduc.tran@emulex.com>
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This patch sends uninitialize pattern to FW during driver unload
which is expected by FW for cleanup
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

We need to store PROTO_ERR_IMPL_LOGO (26) things here, but the
first element isn't used so the array should have 27 elements.
This matches fwevt_to_rnevt[] which has 27 elements.

The patch solves a Smatch static checker warning on my system:
drivers/scsi/csiostor/csio_rnode.c:880 csio_rnode_fwevt_handler()
	error: buffer overflow '(rn)->stats.n_evt_fw' 26 <= 26
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NNaresh Kumar Inna <naresh@chelsio.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

When IO is successfully completed while an abort is pending, eh_abort
incorrectly assumes that abort failed and performes recovery by issuing
cleanup. Howerver, cleanup timesout as the firmware has no clue about
this IO. Fix this by checking if the IO has already completed.
Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

[jejb: move PCI_DEVICE_ID definitions to include/pci_ids.h]
Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Set perf_config to 3 during firmware initialization to enable both
cached connections as well as cached tasks.
Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NBrian Uchino <buchino@cisco.com>
Signed-off-by: NHiral Patel <hiralpat@cisco.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

If switch configured in FIP and adapter configured in non-fip mode, driver
panics while queueing FIP frame in non-existing fip_frame_queue. Added config
check before queueing FIP frame in misconfiguration case to avoid kernel panic.
Signed-off-by: NHiral Patel <hiralpat@cisco.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

FIP VLAN discovery discovers the FCoE VLAN that will be used by all other FIP
protocols as well as by the FCoE encapsulation for Fibre Channel payloads on
the established virtual link. One of the goals of FC-BB-5 was to be as
nonintrusive as possible on initiators and targets, and therefore FIP VLAN
discovery occurs in the native VLAN used by the initiator or target to
exchange Ethernet traffic. The FIP VLAN discovery protocol is the only FIP
protocol running on the native VLAN; all other FIP protocols run on the
discovered FCoE VLANs.

If an administrator has manually configured FCoE VLANs on ENodes and FCFs,
there is no need to use this protocol. FIP and FCoE will run over the
configured VLANs.

An ENode without FCoE VLANs configuration would use this automated discovery
protocol to discover over which VLANs FCoE is running.

The ENode sends a FIP VLAN discovery request to a multicast MAC address called
All-FCF-MACs, which is a multicast MAC address to which all FCFs listen.

All FCFs that can be reached in the native VLAN of the ENode are expected to
respond on the same VLAN with a response that lists one or more FCoE VLANs
that are available for the ENode's VN_Port login. This protocol has the sole
purpose of allowing the ENode to discover all the available FCoE VLANs.

Now the ENode may enable a subset of these VLANs for FCoE Running the FIP
protocol in these VLANs on a per VLAN basis. And FCoE data transactions also
would occur on this VLAN. Hence, Except for FIP VLAN discovery, all other FIP
and FCoE traffic runs on the selected FCoE VLAN.  Its only the FIP VLAN
Discovery protocol that is permitted to run on the Default native VLAN of the
system.

[**** NOTE ****]
We are working on moving this feature definitions and functionality to libfcoe
module. We need this patch to be approved, as Suse is looking forward to merge
this feature in SLES 11 SP3 release.  Once this patch is approved, we will
submit patch which should move vlan discovery feature to libfoce.

[Fengguang Wu <fengguang.wu@intel.com>: kmalloc cast removal]
Signed-off-by: NAnantha Prakash T <atungara@cisco.com>
Signed-off-by: NHiral Patel <hiralpat@cisco.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Use preferable function name which implies using a pseudo-random
number generator.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: James Smart <james.smart@emulex.com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The firmware supports a maximum of 4K FCoE exchanges. In 4-port devices,
or when working in multi-function mode, this resource needs to be distributed
between the various possible FCoE functions.

This information needs to be calculated by bnx2x and propagated into bnx2fc
via cnic. bnx2fc can then use this value to calculate corresponding xid
resources instead of using global constants.
Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was already unused when first introduced in 2d70c103.
Signed-off-by: NJoern Engel <joern@logfs.org>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Fix typo in printk and comments within various drivers.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Rename the hardware VLAN acceleration features to include "CTAG" to indicate
that they only support CTAGs. Follow up patches will introduce 802.1ad
server provider tagging (STAGs) and require the distinction for hardware not
supporting acclerating both.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously we used PCI_MSI_FLAGS to locate a register in the MSI-X
capability.  This did work because the MSI and MSI-X flags happen
to be at the same offsets, but was confusing.

PCI_MSIX_FLAGS_ENABLE is already defined in include/uapi/linux/pci_regs.h,
so no need to define it again.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NAdam Radford <aradford@gmail.com>

This reverts commit 3e13ea45.

It should go through the scsi tree instead.

Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit af0f3a56.

It should go through the scsi tree instead.

Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With the 0x1b4b vendor ID #define in place, convert hard-coded ID
values.
Signed-off-by: NMyron Stowe <myron.stowe@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJames Bottomley <James.Bottomley@hansenpartnership.com>

With the 0x1b4b vendor ID #define in place, convert hard-coded ID
values.
Signed-off-by: NMyron Stowe <myron.stowe@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJames Bottomley <James.Bottomley@hansenpartnership.com>

This driver now uses the module_pcmcia_driver() macro to supply the
init/exit code. The nsp_cs_{init,exit} prototypes should be removed.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch has software iscsi use PF_MEMALLOC/__GFP_MEMALLOC
to be able to better support swap over iscsi disks similar to
what was added for nbd.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

In iscsi_free_task, NULL is assigned to task->sc twice: before and
after kfifo_in invocatoin. Allocating and freeing iscsi_task are guarded
with session->lock, so multiple NULL assignments cause no trouble. But
people reading the source code may be confused.

The second NULL assignment comes from commit:

    3e5c28ad

It seems that the line after kfifo_in invocation was introduced
accidentally.
Signed-off-by: NMasatake YAMATO <yamato@redhat.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Added print statements for following AENs:
1. MBOX_ASTS_INITIALIZATION_FAILED
2. MBOX_ASTS_SYSTEM_WARNING_EVENT
3. MBOX_ASTS_DCBX_CONF_CHANGE
4. MBOX_ASTS_IPV6_DEFAULT_ROUTER_CHANGED
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Use correct value for max flash node entries supported
based on adapter type.
Signed-off-by: NAdheer Chandravanshi <adheer.chandravanshi@qlogic.com>
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NAdheer Chandravanshi <adheer.chandravanshi@qlogic.com>
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>