The KIQ is on the second MEC and its reservation is covered in the
latter logic, so no need to reserve its bit twice.
Signed-off-by: NYong Zhao <Yong.Zhao@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Given amdkfd.ko has been merged into amdgpu.ko, this switch is no
longer useful.
Signed-off-by: NYong Zhao <Yong.Zhao@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

During kexec some adapters hit an EEH since they are not properly
shut down in the radeon_pci_shutdown() function. Adding
radeon_suspend_kms() fixes this issue.
Enabled only on PPC because this patch causes issues on some other
boards.
Signed-off-by: NKyle Mahlkuch <kmahlkuc@linux.vnet.ibm.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix sparse warnings:

drivers/gpu/drm/amd/amdgpu/../powerplay/arcturus_ppt.c:2050:5:
 warning: symbol 'arcturus_i2c_eeprom_control_init' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../powerplay/arcturus_ppt.c:2068:6:
 warning: symbol 'arcturus_i2c_eeprom_control_fini' was not declared. Should it be static?
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Correct the "_LENTH" mispelling in the AMDGPU_MAX_TIMEOUT_PARAM_LENGTH
constant.
Signed-off-by: NWambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Declare `amdgpu_exp_hw_support` as extern in amdgpu.h to address the
following sparse warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c:118:5: warning: symbol 'amdgpu_exp_hw_support' was not declared. Should it be static?
Signed-off-by: NWambui Karuga <wambui.karugax@gmail.com>
Suggested-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix sparse warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:963:6:
 warning: symbol 'calculate_integer_scaling' was not declared. Should it be static?
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The vega10_odn_update_soc_table() function does not allow the SCLK
dependent voltage to be set for power-state 7 to a value below the default
in pptable. Change the for-loop condition to allow undervolting in the
highest state.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205277Signed-off-by: NPelle van Gils <pelle@vangils.xyz>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

if no disable gfx CGPG when suspend smu, enabling gfx CGPG will fail when resume smu.

Platform: Renoir
dmesg log information:

[  151.844110 ] amdgpu: [powerplay] SMU is resuming...
[  151.844116 ] amdgpu: [powerplay] dpm has been disabled
[  151.844604 ] amdgpu: [powerplay] Failed to send message 0x2f,response 0xfffffffb param 0x1
[  151.844605 ] amdgpu: [powerplay] SMU is resumed successfully!
Signed-off-by: Nchen gong <curry.gong@amd.com>
Acked-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove unnecessary assignment for return value and have the
function return the required value directly.
Issue found by coccinelle:
@@
local idexpression ret;
expression e;
@@

-ret =
+return
     e;
-return ret;
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NWambui Karuga <wambui@karuga.xyz>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

dc.c:583:null check is needed after using kzalloc function
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: Nzhongshiqi <zhong.shiqi@zte.com.cn>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/dce/dce_aux.c: In function dce_aux_configure_timeout:
drivers/gpu/drm/amd/display/dc/dce/dce_aux.c: warning: variable timeout set but not used [-Wunused-but-set-variable]
Signed-off-by: NChenwandun <chenwandun@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use ERR_PTR to return back the error happened during amdgpu_ib_schedule.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Problem:
When run_job fails and HW fence returned is NULL we still signal
the s_fence to avoid hangs but the user has no way of knowing if
the actual HW job was ran and finished.

Fix:
Allow .run_job implementations to return ERR_PTR in the fence pointer
returned and then set this error for s_fence->finished fence so whoever
wait on this fence can inspect the signaled fence for an error.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The parameters what SMU_MSG_PowerUpVcn need is 0, not 1
Signed-off-by: Nchen gong <curry.gong@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

update registers: mmCGTT_SPI_CLK_CTRL
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NTianci.Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

update registers: mmCGTT_SPI_CLK_CTRL
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NTianci.Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

update registers: mmCGTT_SPI_CLK_CTRL
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NTianci.Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For dpm disabled case, it's assumed the only one support clock
level is always current clock level.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For Arcturus, clock limit settings on uclk/socclk/fclk domains
are not supported.

V2: simplify the code to support both SGPU and MGPU cases
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allow userspace to read the same status registers for every family.
Based on commit c7890fea, added any of these registers if defined in
the include files of each architecture.
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For Arcturus the I2C traffic is done through SMU tables and so
we must postpone RAS recovery init to after they are ready
which is in amdgpu_device_ip_hw_init_phase2.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add Arcturus EEPROM/I2C support in generic EEPROM code.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The communication is done through SMU table and hence the code
is in powerplay.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Will be used by Arcturus support for RAS page retirement.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]

Some LED panel drivers might not like fractional PWM. In such cases,
backlight flickering may be observed.

[How]

Add a DC feature mask to disable fractional PWM, and associate it with
the preexisting dc_config flag.

The flag is only plumbed through the dmcu firmware, so plumb it through
the driver path as well.

To disable, add the following to the linux cmdline:
amdgpu.dcfeaturemask=0x4

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204957Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Reviewed-by: NAnthony Koo <anthony.koo@amd.com>
Tested-by: NLukáš Krejčí <lskrejci@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

After VCN2.5 firmware (Version ENC: 1.1  Revision: 11),
VCN2.5 encoding can work properly.
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This seems to help with https://bugs.freedesktop.org/show_bug.cgi?id=111481.

v2: insert a NOP instead of skipping all 0-sized IBs to avoid breaking older hw
Signed-off-by: NPierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VKexample test hang during Occlusion/SDMA/Varia runs.
Clear XNACK_WATERMK in reg SDMA0_UTCL1_WATERMK to fix this issue.
Signed-off-by: Nchen gong <curry.gong@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Easy for maintainance.
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Ras reboot debugfs node allows user one easy control to avoid
gpu recovery hang problem and directly reboot system per card
basis, after ras uncorrectable error happens. However, it is
one common entry, which should get rid of ras_ctrl node and
remove ip dependence when inputting by user. So add one new
auto_reboot node in ras debugfs dir to achieve this.

v2: in commit mssage, add justification why ras reboot debugfs
node is needed.
v3: use debugfs_create_bool to create debugfs file for boolean value
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If device reset/suspend/resume failed for some reason, dqm lock is
hold forever and this causes deadlock. Below is a kernel backtrace when
application open kfd after suspend/resume failed.

Instead of holding dqm lock in pre_reset and releasing dqm lock in
post_reset, add dqm->sched_running flag which is modified in
dqm->ops.start and dqm->ops.stop. The flag doesn't need lock protection
because write/read are all inside dqm lock.

For HWS case, map_queues_cpsch and unmap_queues_cpsch checks
sched_running flag before sending the updated runlist.

v2: For no-HWS case, when device is stopped, don't call
load/destroy_mqd for eviction, restore and create queue, and avoid
debugfs dump hdqs.

Backtrace of dqm lock deadlock:

[Thu Oct 17 16:43:37 2019] INFO: task rocminfo:3024 blocked for more
than 120 seconds.
[Thu Oct 17 16:43:37 2019]       Not tainted
5.0.0-rc1-kfd-compute-rocm-dkms-no-npi-1131 #1
[Thu Oct 17 16:43:37 2019] "echo 0 >
/proc/sys/kernel/hung_task_timeout_secs" disables this message.
[Thu Oct 17 16:43:37 2019] rocminfo        D    0  3024   2947
0x80000000
[Thu Oct 17 16:43:37 2019] Call Trace:
[Thu Oct 17 16:43:37 2019]  ? __schedule+0x3d9/0x8a0
[Thu Oct 17 16:43:37 2019]  schedule+0x32/0x70
[Thu Oct 17 16:43:37 2019]  schedule_preempt_disabled+0xa/0x10
[Thu Oct 17 16:43:37 2019]  __mutex_lock.isra.9+0x1e3/0x4e0
[Thu Oct 17 16:43:37 2019]  ? __call_srcu+0x264/0x3b0
[Thu Oct 17 16:43:37 2019]  ? process_termination_cpsch+0x24/0x2f0
[amdgpu]
[Thu Oct 17 16:43:37 2019]  process_termination_cpsch+0x24/0x2f0
[amdgpu]
[Thu Oct 17 16:43:37 2019]
kfd_process_dequeue_from_all_devices+0x42/0x60 [amdgpu]
[Thu Oct 17 16:43:37 2019]  kfd_process_notifier_release+0x1be/0x220
[amdgpu]
[Thu Oct 17 16:43:37 2019]  __mmu_notifier_release+0x3e/0xc0
[Thu Oct 17 16:43:37 2019]  exit_mmap+0x160/0x1a0
[Thu Oct 17 16:43:37 2019]  ? __handle_mm_fault+0xba3/0x1200
[Thu Oct 17 16:43:37 2019]  ? exit_robust_list+0x5a/0x110
[Thu Oct 17 16:43:37 2019]  mmput+0x4a/0x120
[Thu Oct 17 16:43:37 2019]  do_exit+0x284/0xb20
[Thu Oct 17 16:43:37 2019]  ? handle_mm_fault+0xfa/0x200
[Thu Oct 17 16:43:37 2019]  do_group_exit+0x3a/0xa0
[Thu Oct 17 16:43:37 2019]  __x64_sys_exit_group+0x14/0x20
[Thu Oct 17 16:43:37 2019]  do_syscall_64+0x4f/0x100
[Thu Oct 17 16:43:37 2019]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
Suggested-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DWB (Display Writeback) flag needs to be enabled as 1, or system
will throw out a few warnings when creating dcn20 resource pool.
Also, Navi14's dwb setting needs to match Navi10's,
which has already been set to 1.

[How]
Change value of num_dwb from 0 to 1.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Adding psr mask to dc features allows selectively disable/enable psr.
Current psr implementation may not work with non-pageflipping application.
Until resolved it should be disabled by default.

[How]
Add dcfeaturemask for psr enablement. Disable by default.
To enable set amdgpu.dcfeaturemask=0x8 in grub kernel command line.
Signed-off-by: NRoman Li <Roman.Li@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With this cleanup, the APIs from amdgpu_smu.c will map to
ASIC specific ones directly. Those can be shared around
all SMU V11/V12 ASICs will be put in smu_v11_0.c and
smu_v12_0.c respectively.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Those swSMU APIs used internally are moved to smu_internal.h while
others are kept in amdgpu_smu.h.

V2: give a better name smu_internal.h for the place to hold
    those internal APIs
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is a quick and low risk fix. Those APIs which
are exposed to other IPs or to support sysfs/hwmon
interfaces or DAL will have lock protection. Meanwhile
no lock protection is enforced for swSMU internal used
APIs. Future optimization is needed.

V2: strip the lock protection for all swSMU internal APIs
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: NFeifei Xu <Feifei.Xu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add mmsch part registers
Signed-off-by: NJane Jian <jane.jian@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
This workaround was put in dcn2 DMLv1, and now we need it in DMLv2.
Signed-off-by: NJoshua Aberback <joshua.aberback@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>