The firmware interface has added support for new link speeds using
PAM4 modulation.  Expand the bnxt_link_info structure to closely
mirror the new firmware structures.  Add logic to copy the PAM4
capabilities and settings from the firmware.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extract the code for determining an advertised speed is no longer
supported into a separate function. This will avoid some code
duplication in a later patch when supporting PAM4 speeds, since
these speeds are specified in a separate field.
Reviewed-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The main changes include FEC, ECN statistics, HWRM_PORT_PHY_QCFG
response size reduction, and a new counter added to
ctx_hw_stats_ext struct to support the new 58818 chip.

The ctx_hw_stats_ext structure is now the superset supporting the new
58818 chips and the prior P5 chips.  Add a new flag to identify the new
chip and use constants for the chip specific ring statistics sizes
instead of the size of the structure.

Because the HWRM_PORT_PHY_QCFG response structure size has shrunk back
to 96 bytes, the workaround added earlier to limit the size of this
message for forwarding to the VF can be removed.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The wrong flag value caused the firmware call to return actual port
counters instead of the counter masks.  This messed up the counter
overflow logic and caused erratic extended port counters to be
displayed under ethtool -S.

Fixes: 531d1d26 ("bnxt_en: Retrieve hardware masks for port counters.")
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix it to set the required fid input parameter.  The firmware call
fails without this patch.

Fixes: d752d053 ("bnxt_en: Retrieve hardware counter masks from firmware if available.")
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Returning "unknown" as a temperature value violates the hwmon interface
rules. Appropriate error codes should be returned via device_attribute
show instead. These will ultimately be propagated to the user via the
file system interface.

In addition to the corrected error handling, it is an even better idea to
not present the sensor in sysfs at all if it is known that the read will
definitely fail. Given that temp1_input is currently the only sensor
reported, ensure no hwmon registration if TEMP_MONITOR_QUERY is not
supported or if it will fail due to access permissions. Something smarter
may be needed if and when other sensors are added.

Fixes: 12cce90b ("bnxt_en: fix HWRM error when querying VF temperature")
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using strlcpy() to copy from VPD is not correct because VPD strings
are not necessarily NULL terminated.  Use memcpy() to copy the VPD
length up to the destination buffer size - 1.  The destination is
zeroed memory so it will always be NULL terminated.

Fixes: a0d0fd70 ("bnxt_en: Read partno and serialno of the board from VPD")
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We allow drivers to call napi_hash_del() before calling
netif_napi_del() to batch RCU grace periods. This makes
the API asymmetric and leaks internal implementation details.
Soon we will want the grace period to protect more than just
the NAPI hash table.

Restructure the API and have drivers call a new function -
__netif_napi_del() if they want to take care of RCU waits.

Note that only core was checking the return status from
napi_hash_del() so the new helper does not report if the
NAPI was actually deleted.

Some notes on driver oddness:
 - veth observed the grace period before calling netif_napi_del()
   but that should not matter
 - myri10ge observed normal RCU flavor
 - bnx2x and enic did not actually observe the grace period
   (unless they did so implicitly)
 - virtio_net and enic only unhashed Rx NAPIs

The last two points seem to indicate that the calls to
napi_hash_del() were a left over rather than an optimization.
Regardless, it's easy enough to correct them.

This patch may introduce extra synchronize_net() calls for
interfaces which set NAPI_STATE_NO_BUSY_POLL and depend on
free_netdev() to call netif_napi_del(). This seems inevitable
since we want to use RCU for netpoll dev->napi_list traversal,
and almost no drivers set IFF_DISABLE_NETPOLL.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bnxt_fw_reset_task() which runs from a workqueue can race with
bnxt_remove_one().  For example, if firmware reset and VF FLR are
happening at about the same time.

bnxt_remove_one() already cancels the workqueue and waits for it
to finish, but we need to do this earlier before the devlink
reporters are destroyed.  This will guarantee that
the devlink reporters will always be valid when bnxt_fw_reset_task()
is still running.

Fixes: b148bb23 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().")
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

When the driver goes through PCIe AER reset in error state, all
firmware messages will timeout because the PCIe bus is no longer
accessible.  This can lead to AER reset taking many minutes to
complete as each firmware command takes time to timeout.

Define a new macro BNXT_NO_FW_ACCESS() to skip these firmware messages
when either firmware is in fatal error state or when
pci_channel_offline() is true.  It now takes a more reasonable 20 to
30 seconds to complete AER recovery.

Fixes: b4fff207 ("bnxt_en: Do not send firmware messages if firmware is in error state.")
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Netpoll can try to poll napi as soon as napi_enable() is called.
It crashes trying to access a doorbell which is still NULL:

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 CPU: 59 PID: 6039 Comm: ethtool Kdump: loaded Tainted: G S                5.9.0-rc1-00469-g5fd99b5d-dirty #26
 RIP: 0010:bnxt_poll+0x121/0x1c0
 Code: c4 20 44 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 8b 86 a0 01 00 00 41 23 85 18 01 00 00 49 8b 96 a8 01 00 00 0d 00 00 00 24 <89> 02
41 f6 45 77 02 74 cb 49 8b ae d8 01 00 00 31 c0 c7 44 24 1a
  netpoll_poll_dev+0xbd/0x1a0
  __netpoll_send_skb+0x1b2/0x210
  netpoll_send_udp+0x2c9/0x406
  write_ext_msg+0x1d7/0x1f0
  console_unlock+0x23c/0x520
  vprintk_emit+0xe0/0x1d0
  printk+0x58/0x6f
  x86_vector_activate.cold+0xf/0x46
  __irq_domain_activate_irq+0x50/0x80
  __irq_domain_activate_irq+0x32/0x80
  __irq_domain_activate_irq+0x32/0x80
  irq_domain_activate_irq+0x25/0x40
  __setup_irq+0x2d2/0x700
  request_threaded_irq+0xfb/0x160
  __bnxt_open_nic+0x3b1/0x750
  bnxt_open_nic+0x19/0x30
  ethtool_set_channels+0x1ac/0x220
  dev_ethtool+0x11ba/0x2240
  dev_ioctl+0x1cf/0x390
  sock_do_ioctl+0x95/0x130
Reported-by: NRob Sherwood <rsher@fb.com>
Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The recent changes to support user-defined RSS map assume that RX
rings are always reserved and the default RSS map is set after the
RX rings are successfully reserved.  If the firmware spec is older
than 1.6.1, no ring reservations are required and the default RSS
map is not setup at all.  In another scenario where the fw Resource
Manager is older, RX rings are not reserved and we also end up with
no valid RSS map.

Fix both issues in bnxt_need_reserve_rings().  In both scenarios
described above, we don't need to reserve RX rings so we need to
call this new function bnxt_check_rss_map_no_rmgr() to setup the
default RSS map when needed.

Without valid RSS map, the NIC won't receive packets properly.

Fixes: 1667cbf6 ("bnxt_en: Add logical RSS indirection table structure.")
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are no VF rings available during probe when the device is configured
using the Minimal-Static reservation strategy. In this case, the RSS
indirection table can only be initialized later, during bnxt_open_nic().
However, this was not happening because the rings will already have been
reserved via bnxt_init_dflt_ring_mode(), causing bnxt_need_reserve_rings()
to return false in bnxt_reserve_rings() and bypass the RSS table init.

Solve this by pushing the call to bnxt_set_dflt_rss_indir_tbl() into
__bnxt_reserve_rings(), which is common to both paths and is called
whenever ring configuration is changed. After doing this, the RSS table
init that must be called from bnxt_init_one() happens implicitly via
bnxt_set_default_rings(), necessitating doing the allocation earlier in
order to avoid a null pointer dereference.

Fixes: bd3191b5 ("bnxt_en: Implement ethtool -X to set indirection table.")
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Firmware returns RESOURCE_ACCESS_DENIED for HWRM_TEMP_MONITORY_QUERY for
VFs. This produces unpleasing error messages in the log when temp1_input
is queried via the hwmon sysfs interface from a VF.

The error is harmless and expected, so silence it and return unknown as
the value. Since the device temperature is not particularly sensitive
information, provide flexibility to change this policy in future by
silencing the error rather than avoiding the HWRM call entirely for VFs.

Fixes: cde49a42 ("bnxt_en: Add hwmon sysfs support to read temperature")
Cc: Marc Smith <msmith626@gmail.com>
Reported-by: NMarc Smith <msmith626@gmail.com>
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bnxt_fw_reset_task() is run from a delayed workqueue.  The current
code is not cancelling the workqueue in the driver's .remove()
method and it can potentially crash if the device is removed with
the workqueue still pending.

The fix is to clear the BNXT_STATE_IN_FW_RESET flag and then cancel
the delayed workqueue in bnxt_remove_one().  bnxt_queue_fw_reset_work()
also needs to check that this flag is set before scheduling.  This
will guarantee that no rescheduling will be done after it is cancelled.

Fixes: 230d1f0d ("bnxt_en: Handle firmware reset.")
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a PCI error is detected the PCI state could be corrupt, save
the PCI state after initialization and restore it after the slot
reset.

Fixes: 6316ea6d ("bnxt_en: Enable AER support.")
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>

Fixes coccicheck warning:

./drivers/net/ethernet/broadcom/bnxt/bnxt.c:3730:19-37: WARNING:
dma_alloc_coherent use in stats -> hw_stats already zeroes out
memory,  so memset is not needed

dma_alloc_coherent use in status already zeroes out memory,
so memset is not needed
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NLi Heng <liheng40@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support to dump PXP registers and PCIe statistics.
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now we can report all the full 64-bit CPU endian software accumulated
counters instead of the hw counters, some of which may be less than
64-bit wide.  Define the necessary macros to access the software
counters.
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that we have the infrastructure in place, add the new function
bnxt_accumulate_all_stats() to periodically accumulate and check for
counter rollover of all ring stats and port stats.

A chip bug was also discovered that could cause some ring counters to
become 0 during DMA.  Workaround by ignoring zeros on the affected
chips.

Some older frimware will reset port counters during ifdown.  We need
to check for that and free the accumulated port counters during ifdown
to prevent bogus counter overflow detection during ifup.
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If supported by newer firmware, make the firmware call to query all
the port counter masks.  If not supported, assume 40-bit port
counter masks.
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Newer firmware has a new call HWRM_FUNC_QSTATS_EXT to retrieve the
masks of all ring counters.  Make this call when supported to
initialize the hardware masks of all ring counters.  If the call
is not available, assume 48-bit ring counter masks on P5 chips.
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some of these DMAed hardware counters are not full 64-bit counters and
so we need to accumulate them as they overflow.  Allocate copies of these
DMA statistics memory blocks with the same size for accumulation.  The
hardware counter widths are also counter specific so we allocate
memory for masks that correspond to each counter.
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver manages multiple statistics structures of different sizes.
They are all allocated, freed, and handled practically the same.  Define
a new bnxt_stats_mem structure and common allocation and free functions
for all staistics memory blocks.
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The port statistics structures have hard coded padding and offset.
Define macros to make this look cleaner.
Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Main changes are 200G support and fixing the definitions of discard and
error counters to match the hardware definitions.

Because the HWRM_PORT_PHY_QCFG message size has now exceeded the max.
encapsulated response message size of 96 bytes from the PF to the VF,
we now need to cap this message to 96 bytes for forwarding.  The forwarded
response only needs to contain the basic link status and speed information
and can be capped without adding the new information.

v2: Fix bnxt_re compile error.

Cc: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove PCIe non-counters display from ethtool statistics, as
they are not simple counters but register dump.  The next few
patches will add logic to detect counter roll-over and it won't
work with these PCIe non-counters.

There will be a follow up patch to get PCIe information via
ethtool register dump.
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The fact that NETIF_F_HW_TC is not set should be a sufficient
indication to the user that TC offloads are not supported.
No need to bother users of older firmware versions with
pointless warnings on every boot.

Also, since the support is optional, bnxt_init_tc() should not
return an error in case FW is old, similarly to how error
is not returned when CONFIG_BNXT_FLOWER_OFFLOAD is not set.

With that we can add an error message to the caller, to warn
about actual unexpected failures.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current completion ring sizing formula is wrong with TPA enabled.
The formula assumes that the number of TPA completions are bound by the
RX ring size, but that's not true.  TPA_START completions are immediately
recycled so they are not bound by the RX ring size.  We must add
bp->max_tpa to the worst case maximum RX and TPA completions.

The completion ring can overflow because of this mistake.  This will
cause hardware to disable the completion ring when this happens,
leading to RX and TX traffic to stall on that ring.  This issue is
generally exposed only when the RX ring size is set very small.

Fix the formula by adding bp->max_tpa to the number of RX completions
if TPA is enabled.

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.");
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In a shared port PHY configuration, async event is received when any of the
port modifies the configuration. Ethtool link settings should be
initialised after updated PHY configuration from firmware.

Fixes: b1613e78 ("bnxt_en: Add async. event logic for PHY configuration changes.")
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert to new infra, taking advantage of sleeping in callbacks.

v2:
 - use bp->*_fw_dst_port_id != INVALID_HW_RING_ID as indication
   that the offload is active.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bare-metal use cases require giving firmware and the embedded
application processor control over VLAN offloads. The driver should
not attempt to override or utilize this feature in such scenarios
since it will not work as expected.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The hardware VLAN offload feature on our NIC does not have separate
knobs for handling customer and service tags on RX. Either offloading
of both must be enabled or both must be disabled. Introduce definitions
for the combined feature set in order to clean up the code and make
this constraint more clear. Technically these features can be separately
enabled on TX, however, since the default is to turn both on, the
combined TX feature set is also introduced for code consistency.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With the new infrastructure in place, we can now support the setting of
the indirection table from ethtool.

When changing channels, in a rare case that firmware cannot reserve the
rings that were promised, we will still try to keep the RSS map and only
revert to default when absolutely necessary.

v4: Revert RSS map to default during ring change only when absolutely
    necessary.

v3: Add warning messages when firmware cannot reserve the requested RX
    rings, and when the RSS table entries have to change to default.

v2: When changing channels, if the RSS table size changes and RSS map
    is non-default, return error.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that we have the logical table, we can fill the HW RSS table
using the logical table's entries and converting them to the HW
specific format.  Re-initialize the logical table to standard
distribution if the number of RX rings changes during ring reservation.

v4: Use bnxt_get_rxfh_indir_size() to get the RSS table size.

v2: Use ALIGN() to roundup the RSS table size.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On some chips, this varies based on the number of RX rings.  Add this
helper function and refactor the existing code to use it.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver currently does not keep track of the logical RSS indirection
table.  The hardware RSS table is set up with standard default ring
distribution when initializing the chip.  This makes it difficult to
support user sepcified indirection table entries.  As a first step, add
the logical table in the main bnxt structure and allocate it according
to chip specific table size.  Add a function that sets up default
RSS distribution based on the number of RX rings.

v4: Use bnxt_get_rxfh_indir_size() for the current RSS table size.

v2: Use kmalloc_array() since we init. all entries afterwards.
    Use ALIGN() to roundup the RSS table size.
    Use ethtool_rxfh_indir_default() to init. the default entries.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, we allocate one page for the hardware DMA RSS indirection
table.  While the size is currently big enough for all chips, future
chip variations may support bigger sizes, so it is better to calculate
and store the chip specific size and allocate accordingly.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Virtual functions does not have VPD information. This patch modifies
calling bnxt_read_vpd_info() only for PFs and avoids an unnecessary
error log.

Fixes: a0d0fd70 ("bnxt_en: Read partno and serialno of the board from VPD")
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>