- 15 7月, 2009 6 次提交
-
-
由 Dave Airlie 提交于
Userspace sends us a special relocation type to sync video/exa to vlines to avoid tearing, this deals with the relocation in the kernel, it picks the correct crtc and avoids issues where crtcs are disabled. This version also parses the wait until to make sure it isn't trying to do anything evil. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Normally we are free to place VRAM where we want in the GPUs memory address space, however on IGP chips the VRAM is actual RAM, and no special translation or aperture is used inside the GPU MC. So when you move the VRAM aperture away from the TOM register, you actually move it into main memory and can trash things quite badly. This commit makes the code respect the TOM location for MC_FB_LOCATION. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
The crtc and cursor offsets on the legacy chips are offset from DISPLAY_BASE_ADDR. The code worked if display base addr was at 0, but otherwise falls to pieces. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
If there is a problem then this is hiding it, we shouldn't ever need to flush the IB. Either the buffers are: WB - caching just works. WC - no need to do explicit flush, the MB + readback will do it Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Unsigned long is incorrect for 64-bit resources on 32-bit hw. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
1. rv370 can accept 40-bit addresses - also at 24-bit shift not 4 bits 2. rs480 table can be in 40-bit space. - 4 bit shift for top 8 bits 3. rs480 table entries can be in 40-bit space. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 09 7月, 2009 21 次提交
-
-
由 Yinghai Lu 提交于
Alex found that specjbb2005 still can not run with hugepages on an x86-64 machine. This only happens when numa is not compiled in. The root cause: node_set_state will not set it back for us in that case, so don't clear that when numa is not select in config [ v2: use node_clear_state instead ] Reported-and-Tested-by: NAlex Shi <alex.shi@intel.com> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit 5fd29d6c ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Move tty entries to tty not trivial. Noted by David Brownell. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
This fixes the ppp problems and various other issues with call locking caused by one side of a pty called in one locking context trying to match another with differing rules on the other side. We also get a big slack space to work with that means we can bury the flow control deadlock case for any conceivable real world situation. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Powernow-k8: support family 0xf with 2 low p-states [CPUFREQ] fix (utter) cpufreq_add_dev mess [CPUFREQ] Cleanup locking in conservative governor [CPUFREQ] Cleanup locking in ondemand governor [CPUFREQ] Mark policy_rwsem as going static in cpufreq.c wont be exported [CPUFREQ] Eliminate the recent lockdep warnings in cpufreq
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6: quota: Fix possible deadlock during parallel quotaon and quotaoff
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Clear -EAGAIN in dpm_prepare x86: Fix resume from suspend when CONFIG_CC_STACKPROTECTOR
-
由 Sheng Yang 提交于
After some API change, intel_iommu_unmap_range() introduced a assumption that parameter size != 0, otherwise the dma_pte_clean_range() would have a overflowed argument. But the user like KVM don't have this assumption before, then some BUG() triggered. Fix it by ignoring size = 0. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
The f_dev in _request_firmware() is allocated via the fw_setup_device() and fw_register_device() calls and its class set to firmware_class (the class release function is fw_dev_release). Commit 6acf70f0 replaced the kfree(dev) in fw_dev_release() with a put_device() call but my understanding is that the release function is called via put_device -> kobject_put -> kref_put -> koject_release etc. and it should call kfree since it's the last to see this device structure alive. Because of that, the _request_firmware() function on its -ENOENT error path only calls device_unregister(f_dev) which would eventually call fw_dev_release() but there is no kfree (the subsequent put_device call would just make the kref negative). Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NMing Lei <tom.leiming@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
Commit 1c8542c7 replaced kmalloc() with memdup_user() in the write() function but also dropped the kfree(temp). The memdup_user() function allocates memory which is never freed. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: Parag Warudkar <parag.warudkar@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio_mouse - use standard driver registration method Input: mark serio and i8042 as suspended when hibernating too Input: add support for generic GPIO-based matrix keypad Input: arrange keyboards alphabetically Input: gpio-keys - avoid possibility of sleeping in timer function Input: gpio-keys - revert 'change timer to workqueue' Input: dm355evm_keys - fix kconfig symbol names Input: wacom - add DTF720a support and fix rotation on Intuos3 Input: i8042 - more reset quirks for MSI Wind-clone netbooks
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Don't use alloc_bootmem() in init_IRQ() path powerpc: Fix spin_event_timeout() to be robust over context switches powerpc: Use pr_devel() in do_dcache_icache_coherency() powerpc/cell: Use pr_devel() in axon_msi.c powerpc: Use pr_devel() in arch/powerpc/mm/gup.c powerpc: Cleanup & use pr_devel() in arch/powerpc/mm/slb.c powerpc/perf_counter: Remove duplicated #include powerpc: Use pr_devel() in arch/powerpc/mm/mmu_context_nohash.c powerpc/pseries: Use pr_devel() in xics.c powerpc: Remove unnecessary semicolons powerpc/pseries: Use pr_devel() in pseries LPAR HPTE routines powerpc/44x: Fix build error with -Werror for Warp platform powerpc/4xx: Have Warp take advantage of GPIO LEDs default-state = keep powerpc/44x: Update Warp defconfig
-
由 Alexey Dobriyan 提交于
Fix various silly problems wrt mnt_namespace.h: - exit_mnt_ns() isn't used, remove it - done that, sched.h and nsproxy.h inclusions aren't needed - mount.h inclusion was need for vfsmount_lock, but no longer - remove mnt_namespace.h inclusion from files which don't use anything from mnt_namespace.h Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: fix sci interrupt handler video: hitfb: Move over to dev_pm_ops. video: hitfb: Convert to framebuffer_alloc(). video: sh_mobile_lcdcfb: Convert to framebuffer_alloc(). sh: add r8a66597 usb0 host to the se7724 board usb: allow sh7724 to enable on-chip r8a66597 sh-sci: update receive error handling for muxed irqs sh: define PERF_COUNTER_INDEX_OFFSET.
-
由 Linus Torvalds 提交于
This reverts commit 4148df9b. Let's hope that the mm_lock initialization is now correct with all drivers, following Krzysztof's patches. Requested-by: NKrzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Helt 提交于
Remove redundant locking by the mm_lock mutex before a second head of matrox framebuffer is registered. This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap locking" Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Helt 提交于
Remove redundant call to the matroxfb_update_fix() before matrox frambuffer is registered. This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap locking" Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Helt 提交于
Remove redundant call to the w100fb_set_par() before w100 frambuffer is registered. This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap locking" Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Helt 提交于
Remove redundant locking of the fb_info->mm_lock mutex before the frambuffer is registered. This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap locking" Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Helt 提交于
Remove redundant call to the encode_fix() before i810 frambuffer is registered. This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap locking" Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Parag Warudkar 提交于
Commit a65e7bfc broke the UML build with the following error - In file included from fs/proc/kcore.c:17: include/linux/elfcore.h: In function 'elf_core_copy_task_regs': include/linux/elfcore.h:129: error: implicit declaration of function 'task_pt_regs' Fix this by restoring the previous behavior of returning 0 for all arches like UML that don't define task_pt_regs. Signed-off-by: NParag Warudkar <parag.lkml@gmail.com> Acked-by: NAmerigo Wang <xiyou.wangcong@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 7月, 2009 13 次提交
-
-
由 Sebastian Ott 提交于
When the last device in the dpm list is unregistered directly after its prepare() callback returned with -EAGAIN, the return code is passed to the calling function, resulting in a suspend failure. Prevent this by clearing the return code after -EAGAIN. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Peter Chubb 提交于
Patch 08687aec71bc9134fe336e561f6did877bacf74fc0a (x86: unify power/cpu_(32|64).c) renamed cpu_32.c to cpu.c, but did not update the special compilation flags for the file for the new name. This patch fixes the compilation flags, and therefore fixes resume from suspend on my Acer Aspire One. [rjw: The regression from 2.6.30 fixed by this patch is tracked as http://bugzilla.kernel.org/show_bug.cgi?id=13661] Signed-off-by: NPeter Chubb <peterc@nicta.com.au> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Saeed Bishara 提交于
This patch is needed when the gpio's became available only at late stages, for example, when using i2c gpio expander. Signed-off-by: NSaeed Bishara <saeed@marvell.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
Serio ports are not being restarted any longer because resume operations after hibernate do nothing, since the device has not been marked as suspended. This happens because suspend is only considering the SUSPEND event but not the FREEZE event. Note that this driver has still to migrate to dev_pm_ops, but this fixes this particular bug now. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Anton Vorontsov 提交于
This patch fixes various badnesses like this for all interrupt controllers: ------------[ cut here ]------------ Badness at c04db9dc [verbose debug info unavailable] NIP: c04db9dc LR: c04db9ac CTR: 00000000 REGS: c053de30 TRAP: 0700 Not tainted (2.6.31-rc1-00432-ge69b2b5-dirty) MSR: 00021000 <ME,CE> CR: 22020084 XER: 00000000 TASK = c0500480[0] 'swapper' THREAD: c053c000 GPR00: 00000001 c053dee0 c0500480 00000000 00000050 00000020 3fffffff 00000000 GPR08: 00000001 c0540000 e0080080 00000000 22000084 64183600 3ff8f800 00000000 GPR16: 841b0240 449a0303 00000000 00000000 00000000 00000000 00000000 c04f5bf4 GPR24: 00000000 00000000 00000000 00000050 00000020 00000000 3fffffff 00000050 NIP [c04db9dc] alloc_arch_preferred_bootmem+0x48/0x74 LR [c04db9ac] alloc_arch_preferred_bootmem+0x18/0x74 Call Trace: [c053dee0] [c000a5a4] __of_address_to_resource+0x44/0xd0 (unreliable) [c053def0] [c04dba58] ___alloc_bootmem_nopanic+0x50/0x108 [c053df20] [c04dbb28] ___alloc_bootmem+0x18/0x50 [c053df30] [c04d5de0] qe_ic_init+0x5c/0x1b0 [c053df70] [c04d77b0] mpc85xx_mds_pic_init+0xb8/0x10c [c053dfb0] [c04cf374] init_IRQ+0x28/0x3c p.s. commit 85355bb2 ("powerpc: Fix mpic alloc warning") missed some alloc_bootmem() instances, this is now fixed. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Grant Likely 提交于
Current implementation of spin_event_timeout can be interrupted by an IRQ or context switch after testing the condition, but before checking the timeout. This can cause the loop to report a timeout when the condition actually became true in the middle. This patch adds one final check of the condition upon exit of the loop if the last test of the condition was still false. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 2036 368 8 2412 96c arch/powerpc/mm/pgtable.o size after: text data bss dec hex filename 1677 248 8 1933 78d arch/powerpc/mm/pgtable.o Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 7083 1616 0 8699 21fb arch/powerpc/../axon_msi.o size after: text data bss dec hex filename 5772 1208 0 6980 1b44 arch/powerpc/../axon_msi.o Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 3252 384 0 3636 e34 arch/powerpc/mm/gup.o size after: text data bss dec hex filename 2576 96 0 2672 a70 arch/powerpc/mm/gup.o Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 3261 416 4 3681 e61 arch/powerpc/mm/slb.o size after: text data bss dec hex filename 2861 248 4 3113 c29 arch/powerpc/mm/slb.o Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Huang Weiyi 提交于
Remove duplicated #include('s) in arch/powerpc/kernel/mpc7450-pmu.c arch/powerpc/kernel/ppc970-pmu.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 1508 48 28 1584 630 powerpc/mm/mmu_context_nohash.o size after: text data bss dec hex filename 1088 0 28 1116 45c powerpc/mm/mmu_context_nohash.o Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 7720 5488 296 13504 34c0 platforms/pseries/xics.o size after: text data bss dec hex filename 7535 5456 296 13287 33e7 platforms/pseries/xics.o Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-