Currently we only retry to load GuC firmware if the load fails due to
timeout. On Gen9 GuC loading may fail for different reasons, not just
hang/timeout. Direction from the GuC team is to retry for all cases of
GuC load failure on Gen9, not just for timeout.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108593Signed-off-by: NRobert M. Fosha <robert.m.fosha@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190329231746.9129-1-robert.m.fosha@intel.com

If drm_modeset_lock() reports a deadlock it sets the ctx->contexted
field and insists that the caller calls drm_modeset_backoff() or else it
generates a WARN on cleanup.

<4> [1601.870376] WARNING: CPU: 3 PID: 8445 at drivers/gpu/drm/drm_modeset_lock.c:228 drm_modeset_drop_locks+0x35/0x40
<4> [1601.870395] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal i915 coretemp crct10dif_pclmul
<6> [1601.870403] Console: switching
<4> [1601.870403]  snd_hda_intel
<4> [1601.870406] to colour frame buffer device 320x90
<4> [1601.870406]  crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel e1000e snd_hda_core cdc_ether ptp usbnet mii pps_core snd_pcm i2c_i801 mei_me mei prime_numbers
<4> [1601.870422] CPU: 3 PID: 8445 Comm: cat Tainted: G     U            5.0.0-rc7-CI-CI_DRM_5650+ #1
<4> [1601.870424] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.2402.AD3.1810170014 10/17/2018
<4> [1601.870427] RIP: 0010:drm_modeset_drop_locks+0x35/0x40
<4> [1601.870430] Code: 29 48 8b 43 60 48 8d 6b 60 48 39 c5 74 19 48 8b 43 60 48 8d b8 70 ff ff ff e8 87 ff ff ff 48 8b 43 60 48 39 c5 75 e7 5b 5d c3 <0f> 0b eb d3 0f 1f 80 00 00 00 00 41 56 41 55 41 54 55 53 48 8b 6f
<4> [1601.870432] RSP: 0018:ffffc90000d67ce8 EFLAGS: 00010282
<4> [1601.870435] RAX: 00000000ffffffdd RBX: ffffc90000d67d00 RCX: 5dbbe23d00000000
<4> [1601.870437] RDX: 0000000000000000 RSI: 0000000093e6194a RDI: ffffc90000d67d00
<4> [1601.870439] RBP: ffff88849e62e678 R08: 0000000003b7329a R09: 0000000000000001
<4> [1601.870441] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888492100410
<4> [1601.870442] R13: ffff88849ea50958 R14: ffff8884a67eb028 R15: ffff8884a67eb028
<4> [1601.870445] FS:  00007fa7a27745c0(0000) GS:ffff8884aff80000(0000) knlGS:0000000000000000
<4> [1601.870447] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [1601.870449] CR2: 000055af07e66000 CR3: 00000004a8cc2006 CR4: 0000000000760ee0
<4> [1601.870451] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4> [1601.870453] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
<4> [1601.870454] PKRU: 55555554
<4> [1601.870456] Call Trace:
<4> [1601.870505]  i915_dsc_fec_support_show+0x91/0x190 [i915]
<4> [1601.870522]  seq_read+0xdb/0x3c0
<4> [1601.870531]  full_proxy_read+0x51/0x80
<4> [1601.870538]  __vfs_read+0x31/0x190
<4> [1601.870546]  ? __se_sys_newfstat+0x3c/0x60
<4> [1601.870552]  vfs_read+0x9e/0x150
<4> [1601.870557]  ksys_read+0x50/0xc0
<4> [1601.870564]  do_syscall_64+0x55/0x190
<4> [1601.870569]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4> [1601.870572] RIP: 0033:0x7fa7a226d081
<4> [1601.870574] Code: fe ff ff 48 8d 3d 67 9c 0a 00 48 83 ec 08 e8 a6 4c 02 00 66 0f 1f 44 00 00 48 8d 05 81 08 2e 00 8b 00 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53
<4> [1601.870576] RSP: 002b:00007ffcc05140c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
<4> [1601.870579] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fa7a226d081
<4> [1601.870581] RDX: 0000000000020000 RSI: 000055af07e63000 RDI: 0000000000000007
<4> [1601.870583] RBP: 0000000000020000 R08: 000000000000007b R09: 0000000000000000
<4> [1601.870585] R10: 000055af07e60010 R11: 0000000000000246 R12: 000055af07e63000
<4> [1601.870587] R13: 0000000000000007 R14: 000055af07e634bf R15: 0000000000020000

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109745
Fixes: e845f099 ("drm/i915/dsc: Add Per connector debugfs node for DSC support/enable")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190329165152.29259-1-chris@chris-wilson.co.uk

EXT2 GC MAX registers are introduced from Gen10+ to
program values from 3.0 to 7.0. Enabled the same, but
currently limiting it to 1.0 as userspace ABI is limited
at that currently.

v2: Updated the 1.0 programming and aligned as per GLK, also added
GLK along with GEN10+ check, as per Ville's feedback.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553869756-4546-3-git-send-email-uma.shankar@intel.com

GC MAX register is used to program values from 1.0 to
less than 3.0. A different register was used instead of
the intended one. Fixed the same.

Currently limiting it to 1.0 due to ABI limitations.

v2: Updated the 1.0 programming and aligned as per GLK, based
on Ville's feedback.
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553869756-4546-2-git-send-email-uma.shankar@intel.com

Those functions are used on gen4 as well and gen4 does have a non-RCS
engine, so remove the BUG_ON and flip back the logic to what it was
before the ENGINE_READ/WRITE update

v2: update the posting read as well (Chris, Ville).

Fixes: baba6e57 ("drm/i915: take a reference to uncore in the engine and use it")
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190329165018.32953-1-daniele.ceraolospurio@intel.com

edram is not part of uncore and there is no requirement for the
detection to be done before we initialize the uncore functions. The
first check on HAS_EDRAM is in the ggtt_init path, so move it to
i915_driver_init_hw, where other dram-related detection happens.

While at it, save the size in MB instead of the capabilities because the
size is the only thing we look at outside of the init function.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190328174533.31532-1-daniele.ceraolospurio@intel.com

Don't load the linear degamma LUT on ICL. The hardware no longer
has any silly linkages between the CSC enable and degamma LUT
enable so the degamma LUT is only needed when it's actually
enabled.

Also add comments to explain the situation on GLK.

v2: Drop useless parens around 1<<16
v3: Add missing const
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-11-ville.syrjala@linux.intel.com

We now bypass the legacy LUT when it's not needed, so
no point in filling it up with a linear LUT.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-10-ville.syrjala@linux.intel.com

With everything else moved out of the way only ilk+
remains using _intel_color_check(). Streamline the logic
into ilk_color_check().

v2: Add some comments explaining we that we don't expose
    the full hardware capabilities currently (Matt)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-9-ville.syrjala@linux.intel.comReviewed-by: NMatt Roper <matthew.d.roper@intel.com>

Provide a separate .color_check() for BDW+ where we currently
provide the split gamma mode etc.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-8-ville.syrjala@linux.intel.com

Unlike the earlier platforms GLK has dedicated degamma and gamma
LUTs. And quite curiously the degamma LUT is actually controlled
via the PLANE_COLOR_CTL CSC enable bit. Hence we must compute
gamma_enable and csc_enable differently to pre-GLK platforms.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-7-ville.syrjala@linux.intel.com

ICL is rather easy when it comes to .color_check() as it
finally provides us with a full color pipeline with
individual knobs for each stage.

We'll also start bypassing each LUT individually when
it is not needed.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-6-ville.syrjala@linux.intel.com

Since CHV has the CGM unit we require a custom implementation
of .color_check().

This fixes the computation of gamma_enable as previously we
left it enabled even when were using the CGM gamma instead.
Now we turn off the legacy LUT unless it's actually required.

v2: Add some comment explaining the color pipeline (Matt)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-5-ville.syrjala@linux.intel.com

Apart from CHV the other gmch platforms don't currently
require much work in .color_check(). So let's start by
extracting i9xx_color_check().
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-4-ville.syrjala@linux.intel.com

The current intel_color_check() is a mess, and worse yet it is
in fact incorrect for several platforms. The hardware has
evolved quite a bit over the years, so let's just go for a clean
split between the platforms by turning this into a vfunc.
The actual work to split it up will follow.

v2: Assign the vfuncs in the order they appear in the
    struct (Matt)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-3-ville.syrjala@linux.intel.com

In prepartion for per-platform color_check() functions extract the
common code into a separate function.

v2: Improve the C8 comment (Matt)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-2-ville.syrjala@linux.intel.com

Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

90/270 rotation is not supported for Y21x and the 12/16 bits XVYU formats,
reject support for them.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322135954.20434-3-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

This was missing in the original addition of those formats, but in
PLANE_SIZE description it's mentioned that 8 cpp formats are not
valid with Yf tiling. Reject this case properly.

Also reject Y21x Yf tiling support this is also not supported.

Changes since v1:
- Reject Y21x as well.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322135954.20434-2-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Y41x formats is a 4:4:4 format, so it can be addressed with pixel level accuracy.
Meanwhile it seems that while rotating YUYV 4:2:2 formats need a multiple of 2
for width and height, otherwise corruption occurs.

For YUV 4:2:2, the spec says that w/h should always be even, but we get
away with odd height while unrotated. When rotating it seems corruption
occurs with an odd x/y, and w/h should always be even.
Just to be completely paranoid, reject odd x/y w/h when rotating 90/270.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322135954.20434-1-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

This is needed to get the fourcc code merged without conflicts.
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

The intent was to expose these as part of the means to perform full
context recovery (though not the SINGLE_TIMELINE, that is for later and
just sucked as collateral damage). As that requires a couple more
patches to complete the series, roll back the earlier chunks of ABI for
an intervening PR. We keep all the internals intact and under selftests.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327105814.14694-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

This is to disable semaphore usage when on vGPU for now. Unfortunately
GVT-g hasn't fully enabled semaphore usage yet, so current guest with
semaphore use would cause vGPU failure.

Although current semaphore failure with vGPU can be simply resolved by
allowing cmd parser to accept MI_SEMAPHORE_WAIT command with address
audit, we're checking general usage of semaphore and how we should
handle it properly for virtualization in consider of function and
security concern. So we decide to request to disable it for now in
guest driver. Once GVT could support it, we would add new compat bit
to turn it on.

Fixes: e8861964 ("drm/i915: Use HW semaphores for inter-engine synchronisation on gen8+") #vgpu
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327090636.3547-1-zhenyuw@linux.intel.com

Update the DP MSA MISC bits for fastsets. This is needed
when we change between limited and full range RGB output.

On HSW+ changing limited_range does not currently result in a
full modeset since we have don't have the readout code for it
(for DP we could, and probably should, readout from TRANS_MSA_MISC
itself, for HDMI we would have to rely on the infoframe). So
the PIPE_CONF_CHECK() is only performed for pre-HSW platforms.
That means any change in the value will result in a fastset
instead. Fortunately there is no prohibition to changing
TRANS_MSA_MISC dynamically, so it looks like we can legally do
fastsets for this.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-5-ville.syrjala@linux.intel.com

Allow the user to limit the output bpc with DP MST.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-4-ville.syrjala@linux.intel.com

Allow DP MST to output any color depth. This means deep color as
well as falling back to 6bpc if we would otherwise require too
much bandwidth.

TODO: We should probably extend bw_contstrained scheme to force
all streams on the link to 6bpc if we can't fit the new stream(s)
otherwise.

v2: Use a proper for-loop (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-3-ville.syrjala@linux.intel.com

We already expose the force_audio property with SST. Do the same
with MST.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-2-ville.syrjala@linux.intel.com

Add the "Broadcast RGB" property to MST connectors, and implement
the same logic for it as we have in the SST code.

v2: Extract and reuse intel_dp_limited_color_range()

Cc: Ivan Vlk <ari@adyline.sk>
Tested-by: NIvan Vlk <ari@adyline.sk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108821Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-1-ville.syrjala@linux.intel.com

GT VEBOX DISABLE is only 4 bits wide but it was using a 8 bits wide
mask, the remaning reserved bits is set to 0 causing 4 more
nonexistent VEBOX engines being detected as enabled, triggering the
BUG_ON() because of mismatch between vebox_mask and newly added
VEBOX_MASK().

[   64.081621] [drm:intel_device_info_init_mmio [i915]] vdbox enable: 0005, instances: 0005
[   64.081763] [drm:intel_device_info_init_mmio [i915]] vebox enable: 00f1, instances: 0001
[   64.081825] intel_device_info_init_mmio:925 GEM_BUG_ON(vebox_mask != ({ unsigned int first__ = (VECS0); unsigned int count__ = (2); ((&(dev_priv)->__info)->engine_mask & (((~0UL) - (1UL << (first__)) + 1) & (~0UL >> (64 - 1 - (first__ + count__ - 1))))) >> first__; }))
[   64.082047] ------------[ cut here ]------------
[   64.082054] kernel BUG at drivers/gpu/drm/i915/intel_device_info.c:925!

BSpec: 20680
Fixes: 9511cb64 ("drm/i915: Adding missing '; ' to ENGINE_INSTANCES")
Fixes: 26376a7e ("drm/i915/icl: Check for fused-off VDBOX and VEBOX instances")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326230223.26336-1-jose.souza@intel.com

When building with ARCH=i386, readq and writeq are not defined,
resulting in:

intel_uncore.h: In function ‘__raw_uncore_read64’:
intel_uncore.h:257:9: error: implicit declaration of function ‘readq’;
	did you mean ‘readl’? [-Werror=implicit-function-declaration]
  return read##s__(uncore->regs + i915_mmio_reg_offset(reg)); \
         ^

and:

intel_uncore.h: In function ‘__raw_uncore_write64’:
intel_uncore.h:264:2: error: implicit declaration of function ‘writeq’;
	did you mean ‘writel’? [-Werror=implicit-function-declaration]
  write##s__(val, uncore->regs + i915_mmio_reg_offset(reg)); \
  ^

Add the io-64-nonatomic-lo-hi include to have readq and writeq available
for all builds. This header internally includes linux/io.h, so the
native readq and writeq definitions will be used when available.

Fixes: 6cc5ca76 ("drm/i915: rename raw reg access functions")
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326233817.5417-1-daniele.ceraolospurio@intel.com

Tvrtko spotted that I left off the trailing ';'. It went unnoticed by CI
because despite adding the macro, we didn't add a user, so include one as
well (a simple debug print).
Reported-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 97ee6e92 ("drm/i915: stop storing the media fuse")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326180007.11722-1-chris@chris-wilson.co.uk

Since GEM_CREATE is trying to outsmart the user by rounding up unaligned
objects, we used to update the size returned to userspace.
This update seems to have been lost throughout the history.

v2: Use round_up(), reorder locals (Chris)

References: ff72145b ("drm: dumb scanout create/mmap for intel/radeon (v3)")
Signed-off-by: NMichał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Janusz Krzysztofik <janusz.krzysztofik@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326170218.13255-1-michal.winiarski@intel.com

A few advantages:

- Prepares us for the planned split of display uncore from GT uncore

- Improves our engine-centric view of the world in the engine code
  and allows us to avoid jumping back to dev_priv.

- Allows us to wrap accesses to engine register in nice macros that
  automatically pick the right mmio base.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-10-daniele.ceraolospurio@intel.com

The intel_uncore structure is the owner of register access, so
subclass the function to it.

While at it, use a local uncore var and switch to the new read/write
functions where it makes sense.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-9-daniele.ceraolospurio@intel.com

The intel_uncore structure is the owner of register access, so
subclass the function to it.

While at it, use a local uncore var and switch to the new read/write
functions where it makes sense.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-8-daniele.ceraolospurio@intel.com

The intel_uncore structure is the owner of FW, so subclass the
function to it.

While at it, use a local uncore var and switch to the new read/write
functions where it makes sense.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-7-daniele.ceraolospurio@intel.com

The full read/write ops can now work on the intel_uncore struct.
Introduce intel_uncore_read/write functions working on intel_uncore
and switch the I915_READ/WRITE macro to internally call those.

v2: no change
v3: add intel_uncore_read/write functions (Chris), update commit msg
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-6-daniele.ceraolospurio@intel.com

Remove a bit of pointer dancing in the reg access path.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-5-daniele.ceraolospurio@intel.com