Pull RAS fixes from Thomas Gleixner:
 "Two RAS related fixes:

   - Shut down the per CPU thermal throttling poll work properly when a
     CPU goes offline.

     The missing shutdown caused the poll work to be migrated to a
     unbound worker which triggered warnings about the usage of
     smp_processor_id() in preemptible context

   - Fix the PPIN feature initialization which missed to enable the
     functionality when PPIN_CTL was enabled but the MSR locked against
     updates"

* tag 'ras-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Fix logic and comments around MSR_PPIN_CTL
  x86/mce/therm_throt: Undo thermal polling properly on CPU offline

Pull EFI fixes from Thomas Gleixner:
 "Two EFI fixes:

   - Prevent a race and buffer overflow in the sysfs efivars interface
     which causes kernel memory corruption.

   - Add the missing NULL pointer checks in efivar_store_raw()"

* tag 'efi-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Add a sanity check to efivar_store_raw()
  efi: Fix a race and a buffer overflow while reading efivars via sysfs

Pull IOMMU fixes from Joerg Roedel:

 - Intel VT-d fixes:
    - RCU list handling fixes
    - Replace WARN_TAINT with pr_warn + add_taint for reporting firmware
      issues
    - DebugFS fixes
    - Fix for hugepage handling in iova_to_phys implementation
    - Fix for handling VMD devices, which have a domain number which
      doesn't fit into 16 bits
    - Warning message fix

 - MSI allocation fix for iommu-dma code

 - Sign-extension fix for io page-table code

 - Fix for AMD-Vi to properly update the is-running bit when AVIC is
   used

* tag 'iommu-fixes-v5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Populate debugfs if IOMMUs are detected
  iommu/amd: Fix IOMMU AVIC not properly update the is_run bit in IRTE
  iommu/vt-d: Ignore devices with out-of-spec domain number
  iommu/vt-d: Fix the wrong printing in RHSA parsing
  iommu/vt-d: Fix debugfs register reads
  iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with pr_warn + add_taint
  iommu/vt-d: dmar_parse_one_rmrr: replace WARN_TAINT with pr_warn + add_taint
  iommu/vt-d: dmar: replace WARN_TAINT with pr_warn + add_taint
  iommu/vt-d: Silence RCU-list debugging warnings
  iommu/vt-d: Fix RCU-list bugs in intel_iommu_init()
  iommu/dma: Fix MSI reservation allocation
  iommu/io-pgtable-arm: Fix IOVA validation for 32-bit
  iommu/vt-d: Fix a bug in intel_iommu_iova_to_phys() for huge page
  iommu/vt-d: Fix RCU list debugging warnings

Pull i2c fixes from Wolfram Sang:
 "I2C has quite some regression fixes this time.

  One is also related to watchdogs, we have proper acks from Guenter for
  them"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: acpi: put device when verifying client fails
  misc: eeprom: at24: fix regulator underflow
  i2c: gpio: suppress error on probe defer
  macintosh: windfarm: fix MODINFO regression
  i2c: designware-pci: Fix BUG_ON during device removal
  i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device
  watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
  watchdog: iTCO_wdt: Export vendorsupport

Pull ARC fixes from Vineet Gupta:

 - Fix __ALIGN_STR and __ALIGN to not use default junk padding

 - Misc Kconfig cleanups, header updates

* tag 'arc-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: define __ALIGN_STR and __ALIGN symbols for ARC
  ARC: show_regs: reduce lines of output
  ARC: Replace <linux/clk-provider.h> by <linux/of_clk.h>
  ARC: fpu: fix randconfig build error reported by 0-day test service
  ARC: fix some Kconfig typos
  ARC: Cleanup old Kconfig IO scheduler options

Pull kvm fixes from Paolo Bonzini:
 "Bugfixes for x86 and s390"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs
  KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirect
  KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1
  KVM: s390: Also reset registers in sync regs for initial cpu reset
  KVM: fix Kconfig menu text for -Werror
  KVM: x86: remove stale comment from struct x86_emulate_ctxt
  KVM: x86: clear stale x86_emulate_ctxt->intercept value
  KVM: SVM: Fix the svm vmexit code for WRMSR
  KVM: X86: Fix dereference null cpufreq policy

Currently, the intel iommu debugfs directory(/sys/kernel/debug/iommu/intel)
gets populated only when DMA remapping is enabled (dmar_disabled = 0)
irrespective of whether interrupt remapping is enabled or not.

Instead, populate the intel iommu debugfs directory if any IOMMUs are
detected.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: ee2636b8 ("iommu/vt-d: Enable base Intel IOMMU debugfs support")
Signed-off-by: NMegha Dey <megha.dey@linux.intel.com>
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

Pull clk fixes from Stephen Boyd:
 "A small collection of fixes. I'll make another sweep soon to look for
  more fixes for this -rc series.

   - Mark device node const in of_clk_get_parent APIs to ease landing
     changes in users later

   - Fix flag for Qualcomm SC7180 video clocks where we thought it would
     never turn off but actually hardware takes care of it

   - Remove disp_cc_mdss_rscc_ahb_clk on Qualcomm SC7180 SoCs because
     this clk is always on anyway

   - Correct some bad dt-binding numbers for i.MX8MN SoCs"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: imx8mn: Fix incorrect clock defines
  clk: qcom: dispcc: Remove support of disp_cc_mdss_rscc_ahb_clk
  clk: qcom: videocc: Update the clock flag for video_cc_vcodec0_core_clk
  of: clk: Make of_clk_get_parent_{count,name}() parameter const

When an EVMCS enabled L1 guest on KVM will tries doing enlightened VMEnter
with EVMCS GPA = 0 the host crashes because the

evmcs_gpa != vmx->nested.hv_evmcs_vmptr

condition in nested_vmx_handle_enlightened_vmptrld() will evaluate to
false (as nested.hv_evmcs_vmptr is zeroed after init). The crash will
happen on vmx->nested.hv_evmcs pointer dereference.

Another problematic EVMCS ptr value is '-1' but it only causes host crash
after nested_release_evmcs() invocation. The problem is exactly the same as
with '0', we mistakenly think that the EVMCS pointer hasn't changed and
thus nested.hv_evmcs_vmptr is valid.

Resolve the issue by adding an additional !vmx->nested.hv_evmcs
check to nested_vmx_handle_enlightened_vmptrld(), this way we will
always be trying kvm_vcpu_map() when nested.hv_evmcs is NULL
and this is supposed to catch all invalid EVMCS GPAs.

Also, initialize hv_evmcs_vmptr to '0' in nested_release_evmcs()
to be consistent with initialization where we don't currently
set hv_evmcs_vmptr to '-1'.

Cc: stable@vger.kernel.org
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-master-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master

KVM: s390: Fully do the CPU resets as intended

With 7de3f142 ("KVM: s390: Add new reset vcpu API") we clarified
the meaning of the reset ioctl to fully reset the CPU and not only the
parts that can not be handled by userspace. Turns out that we missed
some parts.

Previously all fields of structure kvm_lapic_irq were not initialized
before it was passed to kvm_bitmap_or_dest_vcpus(). Which will cause
an issue when any of those fields are used for processing a request.
For example not initializing the msi_redir_hint field before passing
to the kvm_bitmap_or_dest_vcpus(), may lead to a misbehavior of
kvm_apic_map_get_dest_lapic(). This will specifically happen when the
kvm_lowest_prio_delivery() returns TRUE due to a non-zero garbage
value of msi_redir_hint, which should not happen as the request belongs
to APIC fixed delivery mode and we do not want to deliver the
interrupt only to the lowest priority candidate.

This patch initializes all the fields of kvm_lapic_irq based on the
values of ioapic redirect_entry object before passing it on to
kvm_bitmap_or_dest_vcpus().

Fixes: 7ee30bc1 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs")
Signed-off-by: NNitesh Narayan Lal <nitesh@redhat.com>
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
[Set level to false since the value doesn't really matter. Suggested
 by Vitaly Kuznetsov. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Enable ENCLS-exiting (and thus set vmcs.ENCLS_EXITING_BITMAP) only if
the CPU supports SGX1.  Per Intel's SDM, all ENCLS leafs #UD if SGX1
is not supported[*], i.e. intercepting ENCLS to inject a #UD is
unnecessary.

Avoiding ENCLS-exiting even when it is reported as supported by the CPU
works around a reported issue where SGX is "hard" disabled after an S3
suspend/resume cycle, i.e. CPUID.0x7.SGX=0 and the VMCS field/control
are enumerated as unsupported.  While the root cause of the S3 issue is
unknown, it's definitely _not_ a KVM (or kernel) bug, i.e. this is a
workaround for what is most likely a hardware or firmware issue.  As a
bonus side effect, KVM saves a VMWRITE when first preparing vmcs01 and
vmcs02.

Note, SGX must be disabled in BIOS to take advantage of this workaround

[*] The additional ENCLS CPUID check on SGX1 exists so that SGX can be
    globally "soft" disabled post-reset, e.g. if #MC bits in MCi_CTL are
    cleared.  Soft disabled meaning disabling SGX without clearing the
    primary CPUID bit (in leaf 0x7) and without poking into non-SGX
    CPU paths, e.g. for the VMCS controls.

Fixes: 0b665d30 ("KVM: vmx: Inject #UD for SGX ENCLS instruction in guest")
Reported-by: NToni Spets <toni.spets@iki.fi>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit b9c6ff94 ("iommu/amd: Re-factor guest virtual APIC
(de-)activation code") accidentally left out the ir_data pointer when
calling modity_irte_ga(), which causes the function amd_iommu_update_ga()
to return prematurely due to struct amd_ir_data.ref is NULL and
the "is_run" bit of IRTE does not get updated properly.

This results in bad I/O performance since IOMMU AVIC always generate GA Log
entry and notify IOMMU driver and KVM when it receives interrupt from the
PCI pass-through device instead of directly inject interrupt to the vCPU.

Fixes by passing ir_data when calling modify_irte_ga() as done previously.

Fixes: b9c6ff94 ("iommu/amd: Re-factor guest virtual APIC (de-)activation code")
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

VMD subdevices are created with a PCI domain ID of 0x10000 or
higher.

These subdevices are also handled like all other PCI devices by
dmar_pci_bus_notifier().

However, when dmar_alloc_pci_notify_info() take records of such devices,
it will truncate the domain ID to a u16 value (in info->seg).
The device at (e.g.) 10000:00:02.0 is then treated by the DMAR code as if
it is 0000:00:02.0.

In the unlucky event that a real device also exists at 0000:00:02.0 and
also has a device-specific entry in the DMAR table,
dmar_insert_dev_scope() will crash on:
   BUG_ON(i >= devices_cnt);

That's basically a sanity check that only one PCI device matches a
single DMAR entry; in this case we seem to have two matching devices.

Fix this by ignoring devices that have a domain number higher than
what can be looked up in the DMAR table.

This problem was carefully diagnosed by Jian-Hong Pan.
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Fixes: 59ce0515 ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens")
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

When base address in RHSA structure doesn't match base address in
each DRHD structure, the base address in last DRHD is printed out.

This doesn't make sense when there are multiple DRHD units, fix it
by printing the buggy RHSA's base address.
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: NZhenzhong Duan <zhenzhong.duan@gmail.com>
Fixes: fd0c8894 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables")
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

Pull SCSI fixes from James Bottomley:
 "Two small fixes, both in drivers: ipr and ufs"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ipr: Fix softlockup when rescanning devices in petitboot
  scsi: ufs: Fix possible unclocked access to auto hibern8 timer register

Pull NFS client bugfixes from Anna Schumaker:
 "These are mostly fscontext fixes, but there is also one that fixes
  collisions seen in fscache:

   - Ensure the fs_context has the correct fs_type when mounting and
     submounting

   - Fix leaking of ctx->nfs_server.hostname

   - Add minor version to fscache key to prevent collisions"

* tag 'nfs-for-5.6-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  nfs: add minor version to nfs_server_key for fscache
  NFS: Fix leak of ctx->nfs_server.hostname
  NFS: Don't hard-code the fs_type when submounting
  NFS: Ensure the fs_context has the correct fs_type before mounting

Pull fuse fix from Miklos Szeredi:
 "Fix an Oops introduced in v5.4"

* tag 'fuse-fixes-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix stack use after return

Pull overlayfs fixes from Miklos Szeredi:
 "Fix three bugs introduced in this cycle"

* tag 'ovl-fixes-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix lockdep warning for async write
  ovl: fix some xino configurations
  ovl: fix lock in ovl_llseek()

Pull power management fix from Rafael Wysocki:
 "Fix cpupower utility build failures with -fno-common enabled (Mike
  Gilbert)"

* tag 'pm-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpupower: avoid multiple definition with gcc -fno-common

Pull io_uring fix from Jens Axboe:
 "Just a single fix here, improving the RCU callback ordering from last
  week. After a bit more perusing by Paul, he poked a hole in the
  original"

* tag 'io_uring-5.6-2020-03-13' of git://git.kernel.dk/linux-block:
  io_uring: ensure RCU callback ordering with rcu_barrier()

Pull block fixes from Jens Axboe:
 "A few fixes that should go into this release. This contains:

   - Fix for a corruption issue with the s390 dasd driver (Stefan)

   - Fixup/improvement for the flush insertion change that we had in
     this series (Ming)

   - Fix for the partition suppor for host aware zoned devices
     (Shin'ichiro)

   - Fix incorrect blk-iocost comparison (Tejun)

  The diffstat looks large, but that's a) mostly dasd, and b) the flush
  fix from Ming adds a big comment"

* tag 'block-5.6-2020-03-13' of git://git.kernel.dk/linux-block:
  block: Fix partition support for host aware zoned block devices
  blk-mq: insert flush request to the front of dispatch queue
  s390/dasd: fix data corruption for thin provisioned devices
  blk-iocost: fix incorrect vtime comparison in iocg_is_idle()

Pull MMC fixes from Ulf Hansson:
 "MMC core:

   - Fix HW busy detection support for host controllers requiring the
     MMC_RSP_BUSY response flag (R1B) to be set for the command. In
     particular for CMD6 (eMMC), erase/trim/discard (SD/eMMC) and CMD5
     (eMMC sleep).

  MMC host:

   - sdhci-omap|tegra: Fix support for HW busy detection"

* tag 'mmc-v5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for eMMC sleep command
  mmc: sdhci-tegra: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY
  mmc: sdhci-omap: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY
  mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for erase/trim/discard
  mmc: core: Allow host controllers to require R1B for CMD6

afs_put_addrlist() casts kfree() to rcu_callback_t. Apart from being wrong
in theory, this might also blow up when people start enforcing function
types via compiler instrumentation, and it means the rcu_head has to be
first in struct afs_addr_list.

Use kfree_rcu() instead, it's simpler and more correct.
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge tag 'at24-fixes-for-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current

at24 fixes for v5.6-rc6

- fix regulator underflow bug introduced during the v5.6 merge window

Lockdep reports "WARNING: lock held when returning to user space!" due to
async write holding freeze lock over the write.  Apparently aio.c already
deals with this by lying to lockdep about the state of the lock.

Do the same here.  No need to check for S_IFREG() here since these file ops
are regular-only.

Reported-by: syzbot+9331a354f4f624a52a55@syzkaller.appspotmail.com
Fixes: 2406a307 ("ovl: implement async IO routines")
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Fix up two bugs in the coversion to xino_mode:
1. xino=off does not always end up in disabled mode
2. xino=auto on 32bit arch should end up in disabled mode

Take a proactive approach to disabling xino on 32bit kernel:
1. Disable XINO_AUTO config during build time
2. Disable xino with a warning on mount time

As a by product, xino=on on 32bit arch also ends up in disabled mode.
We never intended to enable xino on 32bit arch and this will make the
rest of the logic simpler.

Fixes: 0f831ec8 ("ovl: simplify ovl_same_sb() helper")
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

i2c_verify_client() can fail, so we need to put the device when that
happens.

Fixes: 525e6fab ("i2c / ACPI: add support for ACPI reconfigure notifications")
Reported-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Commit 6825d3ea ("iommu/vt-d: Add debugfs support to show register
contents") dumps the register contents for all IOMMU devices.

Currently, a 64 bit read(dmar_readq) is done for all the IOMMU registers,
even though some of the registers are 32 bits, which is incorrect.

Use the correct read function variant (dmar_readl/dmar_readq) while
reading the contents of 32/64 bit registers respectively.
Signed-off-by: NMegha Dey <megha.dey@linux.intel.com>
Link: https://lore.kernel.org/r/1583784587-26126-2-git-send-email-megha.dey@linux.intel.comAcked-by: NLu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

Quoting from the comment describing the WARN functions in
include/asm-generic/bug.h:

 * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
 * significant kernel issues that need prompt attention if they should ever
 * appear at runtime.
 *
 * Do not use these macros when checking for invalid external inputs

The (buggy) firmware tables which the dmar code was calling WARN_TAINT
for really are invalid external inputs. They are not under the kernel's
control and the issues in them cannot be fixed by a kernel update.
So logging a backtrace, which invites bug reports to be filed about this,
is not helpful.

Fixes: 556ab45f ("ioat2: catch and recover from broken vtd configurations v6")
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200309182510.373875-1-hdegoede@redhat.com
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=701847Signed-off-by: NJoerg Roedel <jroedel@suse.de>

Quoting from the comment describing the WARN functions in
include/asm-generic/bug.h:

 * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
 * significant kernel issues that need prompt attention if they should ever
 * appear at runtime.
 *
 * Do not use these macros when checking for invalid external inputs

The (buggy) firmware tables which the dmar code was calling WARN_TAINT
for really are invalid external inputs. They are not under the kernel's
control and the issues in them cannot be fixed by a kernel update.
So logging a backtrace, which invites bug reports to be filed about this,
is not helpful.

Some distros, e.g. Fedora, have tools watching for the kernel backtraces
logged by the WARN macros and offer the user an option to file a bug for
this when these are encountered. The WARN_TAINT in dmar_parse_one_rmrr
+ another iommu WARN_TAINT, addressed in another patch, have lead to over
a 100 bugs being filed this way.

This commit replaces the WARN_TAINT("...") call, with a
pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) call
avoiding the backtrace and thus also avoiding bug-reports being filed
about this against the kernel.

Fixes: f5a68bb0 ("iommu/vt-d: Mark firmware tainted if RMRR fails sanity check")
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: Barret Rhoden <brho@google.com>
Link: https://lore.kernel.org/r/20200309140138.3753-3-hdegoede@redhat.com
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1808874

Quoting from the comment describing the WARN functions in
include/asm-generic/bug.h:

 * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
 * significant kernel issues that need prompt attention if they should ever
 * appear at runtime.
 *
 * Do not use these macros when checking for invalid external inputs

The (buggy) firmware tables which the dmar code was calling WARN_TAINT
for really are invalid external inputs. They are not under the kernel's
control and the issues in them cannot be fixed by a kernel update.
So logging a backtrace, which invites bug reports to be filed about this,
is not helpful.

Some distros, e.g. Fedora, have tools watching for the kernel backtraces
logged by the WARN macros and offer the user an option to file a bug for
this when these are encountered. The WARN_TAINT in warn_invalid_dmar()
+ another iommu WARN_TAINT, addressed in another patch, have lead to over
a 100 bugs being filed this way.

This commit replaces the WARN_TAINT("...") calls, with
pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) calls
avoiding the backtrace and thus also avoiding bug-reports being filed
about this against the kernel.

Fixes: fd0c8894 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables")
Fixes: e625b4a9 ("iommu/vt-d: Parse ANDD records")
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200309140138.3753-2-hdegoede@redhat.com
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1564895

Pull drm fixes from Dave Airlie:
 "It's a bit quieter, probably not as much as it could be.

  There is on large regression fix in here from Lyude for displayport
  bandwidth calculations, there've been reports of multi-monitor in
  docks not working since -rc1 and this has been tested to fix those.

  Otherwise it's a bunch of i915 (with some GVT fixes), a set of amdgpu
  watermark + bios fixes, and an exynos iommu cleanup fix.

  core:
   - DP MST bandwidth regression fix.

  i915:
   - hard lockup fix
   - GVT fixes
   - 32-bit alignment issue fix
   - timeline wait fixes
   - cacheline_retire and free

  amdgpu:
   - Update the display watermark bounding box for navi14
   - Fix fetching vbios directly from rom on vega20/arcturus
   - Navi and renoir watermark fixes

  exynos:
   - iommu object cleanup fix"

`

* tag 'drm-fixes-2020-03-13' of git://anongit.freedesktop.org/drm/drm:
  drm/dp_mst: Rewrite and fix bandwidth limit checks
  drm/dp_mst: Reprobe path resources in CSN handler
  drm/dp_mst: Use full_pbn instead of available_pbn for bandwidth checks
  drm/dp_mst: Rename drm_dp_mst_is_dp_mst_end_device() to be less redundant
  drm/i915: Defer semaphore priority bumping to a workqueue
  drm/i915/gt: Close race between cacheline_retire and free
  drm/i915/execlists: Enable timeslice on partial virtual engine dequeue
  drm/i915: be more solid in checking the alignment
  drm/i915/gvt: Fix dma-buf display blur issue on CFL
  drm/i915: Return early for await_start on same timeline
  drm/i915: Actually emit the await_start
  drm/amdgpu/powerplay: nv1x, renior copy dcn clock settings of watermark to smu during boot up
  drm/exynos: Fix cleanup of IOMMU related objects
  drm/amdgpu: correct ROM_INDEX/DATA offset for VEGA20
  drm/amd/display: update soc bb for nv14
  drm/i915/gvt: Fix emulated vbt size issue
  drm/i915/gvt: Fix unnecessary schedule timer when no vGPU exits

Merge tag 'topic/mst-bw-check-fixes-for-airlied-2020-03-12-2' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

UAPI Changes: None

Cross-subsystem Changes: None

Core Changes: Fixed regressions introduced by commit cd82d82c
("drm/dp_mst: Add branch bandwidth validation to MST atomic check"),
which would cause us to:

* Calculate the available bandwidth on an MST topology incorrectly, and
  as a result reject most display configurations that would try to enable
  more then one sink on a topology
* Occasionally expose MST connectors to userspace before finishing
  probing their PBN capabilities, resulting in us rejecting display
  configurations because we assumed briefly that no bandwidth was
  available

Driver Changes: None
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bf16ee577567beed91c86b7d9cda3ec2e8c50a71.camel@redhat.com

Merge tag 'drm-intel-fixes-2020-03-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.6-rc6:
- hard lockup fix
- GVT fixes
- 32-bit alignment issue fix
- timeline wait fixes
- cacheline_retire and free
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lfo6ksvw.fsf@intel.com

Merge tag 'amd-drm-fixes-5.6-2020-03-11' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.6-2020-03-11:

amdgpu:
- Update the display watermark bounding box for navi14
- Fix fetching vbios directly from rom on vega20/arcturus
- Navi and renoir watermark fixes
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312020924.4161-1-alexander.deucher@amd.com

Pull networking fixes from David Miller:
 "It looks like a decent sized set of fixes, but a lot of these are one
  liner off-by-one and similar type changes:

   1) Fix netlink header pointer to calcular bad attribute offset
      reported to user. From Pablo Neira Ayuso.

   2) Don't double clear PHY interrupts when ->did_interrupt is set,
      from Heiner Kallweit.

   3) Add missing validation of various (devlink, nl802154, fib, etc.)
      attributes, from Jakub Kicinski.

   4) Missing *pos increments in various netfilter seq_next ops, from
      Vasily Averin.

   5) Missing break in of_mdiobus_register() loop, from Dajun Jin.

   6) Don't double bump tx_dropped in veth driver, from Jiang Lidong.

   7) Work around FMAN erratum A050385, from Madalin Bucur.

   8) Make sure ARP header is pulled early enough in bonding driver,
      from Eric Dumazet.

   9) Do a cond_resched() during multicast processing of ipvlan and
      macvlan, from Mahesh Bandewar.

  10) Don't attach cgroups to unrelated sockets when in interrupt
      context, from Shakeel Butt.

  11) Fix tpacket ring state management when encountering unknown GSO
      types. From Willem de Bruijn.

  12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend()
      only in the suspend context. From Heiner Kallweit"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
  net: systemport: fix index check to avoid an array out of bounds access
  tc-testing: add ETS scheduler to tdc build configuration
  net: phy: fix MDIO bus PM PHY resuming
  net: hns3: clear port base VLAN when unload PF
  net: hns3: fix RMW issue for VLAN filter switch
  net: hns3: fix VF VLAN table entries inconsistent issue
  net: hns3: fix "tc qdisc del" failed issue
  taprio: Fix sending packets without dequeueing them
  net: mvmdio: avoid error message for optional IRQ
  net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register
  net: memcg: fix lockdep splat in inet_csk_accept()
  s390/qeth: implement smarter resizing of the RX buffer pool
  s390/qeth: refactor buffer pool code
  s390/qeth: use page pointers to manage RX buffer pool
  seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number
  net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
  net/packet: tpacket_rcv: do not increment ring index on drop
  sxgbe: Fix off by one in samsung driver strncpy size arg
  net: caif: Add lockdep expression to RCU traversal primitive
  MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer
  ...

Sigh, this is mostly my fault for not giving commit cd82d82c
("drm/dp_mst: Add branch bandwidth validation to MST atomic check")
enough scrutiny during review. The way we're checking bandwidth
limitations here is mostly wrong:

For starters, drm_dp_mst_atomic_check_bw_limit() determines the
pbn_limit of a branch by simply scanning each port on the current branch
device, then uses the last non-zero full_pbn value that it finds. It
then counts the sum of the PBN used on each branch device for that
level, and compares against the full_pbn value it found before.

This is wrong because ports can and will have different PBN limitations
on many hubs, especially since a number of DisplayPort hubs out there
will be clever and only use the smallest link rate required for each
downstream sink - potentially giving every port a different full_pbn
value depending on what link rate it's trained at. This means with our
current code, which max PBN value we end up with is not well defined.

Additionally, we also need to remember when checking bandwidth
limitations that the top-most device in any MST topology is a branch
device, not a port. This means that the first level of a topology
doesn't technically have a full_pbn value that needs to be checked.
Instead, we should assume that so long as our VCPI allocations fit we're
within the bandwidth limitations of the primary MSTB.

We do however, want to check full_pbn on every port including those of
the primary MSTB. However, it's important to keep in mind that this
value represents the minimum link rate /between a port's sink or mstb,
and the mstb itself/. A quick diagram to explain:

                                MSTB #1
                               /       \
                              /         \
                           Port #1    Port #2
       full_pbn for Port #1 → |          | ← full_pbn for Port #2
                           Sink #1    MSTB #2
                                         |
                                       etc...

Note that in the above diagram, the combined PBN from all VCPI
allocations on said hub should not exceed the full_pbn value of port #2,
and the display configuration on sink #1 should not exceed the full_pbn
value of port #1. However, port #1 and port #2 can otherwise consume as
much bandwidth as they want so long as their VCPI allocations still fit.

And finally - our current bandwidth checking code also makes the mistake
of not checking whether something is an end device or not before trying
to traverse down it.

So, let's fix it by rewriting our bandwidth checking helpers. We split
the function into one part for handling branches which simply adds up
the total PBN on each branch and returns it, and one for checking each
port to ensure we're not going over its PBN limit. Phew.

This should fix regressions seen, where we erroneously reject display
configurations due to thinking they're going over our bandwidth limits
when they're not.

Changes since v1:
* Took an even closer look at how PBN limitations are supposed to be
  handled, and did some experimenting with Sean Paul. Ended up rewriting
  these helpers again, but this time they should actually be correct!
Changes since v2:
* Small indenting fix
* Fix pbn_used check in drm_dp_mst_atomic_check_port_bw_limit()
Signed-off-by: NLyude Paul <lyude@redhat.com>
Fixes: cd82d82c ("drm/dp_mst: Add branch bandwidth validation to MST atomic check")
Cc: Sean Paul <seanpaul@google.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMikita Lipski <mikita.lipski@amd.com>
Tested-by: NHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309210131.1497545-1-lyude@redhat.com

We used to punt off reprobing path resources to the link address probe
work, but now that we handle CSNs asynchronously from the driver's HPD
handling we can do whatever the heck we want from the CSN!

So, reprobe the path resources from drm_dp_mst_handle_conn_stat(). Also,
get rid of the path resource reprobing code in
drm_dp_check_and_send_link_address() since it's needlessly complicated
when we already reprobe path resources from
drm_dp_handle_link_address_port(). And finally, teach
drm_dp_send_enum_path_resources() to return 1 on PBN changes so we know
if we need to send another hotplug or not.

This fixes issues where we've indicated to userspace that a port has
just been connected, before we actually probed it's available PBN -
something that results in unexpected atomic check failures.
Signed-off-by: NLyude Paul <lyude@redhat.com>
Fixes: cd82d82c ("drm/dp_mst: Add branch bandwidth validation to MST atomic check")
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-4-lyude@redhat.comReviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NHans de Goede <hdegoede@redhat.com>