By clearing NAK status of EP, core will send ZLP
to IN token and assert NAK interrupt relying
on TxFIFO status only.

The WA applies only to core versions from 2.72a
to 4.00a (including both). Also for FS_IOT_1.00a
and HS_IOT_1.00a.
Signed-off-by: NArtur Petrosyan <arturp@synopsys.com>
Signed-off-by: NMinas Harutyunyan <hminas@synopsys.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

devm_regulator_get_optional returns -ENODEV if the regulator isn't
there, so if that's the case we have to make sure not to leave -ENODEV
in the regulator pointer.

Also, make sure we return 0 in that case, but correctly propagate any
other errors. Also propagate the error from _dwc2_hcd_start.

Fixes: 531ef5eb ("usb: dwc2: add support for host mode external vbus supply")
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: NAmelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NGrigor Tovmasyan <tovmasya@synopsys.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NMinas Harutyunyan <hminas@synopsys.com>
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

In 4.17-rc, commit 03ea6d6e ("usb: dwc2: Enable power down")
caused the HiKey board to not correctly handle switching between
usb-gadget and usb-host mode.

Unplugging the OTG port would result in:
[   42.240973] dwc2 f72c0000.usb: dwc2_restore_host_registers: no host registers to restore
[   42.249066] dwc2 f72c0000.usb: dwc2_host_exit_hibernation: failed to restore host registers

And the USB-host ports would not function.

And plugging in the OTG port, we would see:
[   46.046557] WARNING: CPU: 3 PID: 6 at drivers/usb/dwc2/gadget.c:260 dwc2_hsotg_init_fifo+0x194/0x1a0
[   46.055761] CPU: 3 PID: 6 Comm: kworker/u16:0 Not tainted 4.17.0-rc5-00030-ge67da8c #231
[   46.055767] Hardware name: HiKey Development Board (DT)
[   46.055784] Workqueue: dwc2 dwc2_conn_id_status_change
...

Thus, this patch sets the hisi params to disable the power_down
flag by default, and gets thing working again.

Cc: John Youn <johnyoun@synopsys.com>
Cc: Vardan Mikayelyan <mvardan@synopsys.com>
Cc: Artur Petrosyan <arturp@synopsys.com>
Cc: Grigor Tovmasyan <tovmasya@synopsys.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Added descriptions for all not described parameters.
Fix all kernel doc's warnings.
Acked-by: NMinas Harutyunyan <hminas@synopsys.com>
Signed-off-by: NGrigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Introduce FSL_USB2_PHY_UTMI_DUAL in gadget driver for setting
phy in SOCs with utmi dual phy
Acked-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NNikhil Badola <nikhil.badola@freescale.com>
Tested-by: NTiago Brusamarello <tbrusa@gmail.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Fix sparse warning

Fixes: 5f0b74e5 ("USB: dwc3: get extcon device by OF graph bindings")
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

We dont' need to touch req->direction or req->epnum from
ep_queue(). It's enough that we initialize both fields from
alloc_request() and just keep them for the entire lifetime of the
request.

No functional changes.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Instead of *always* calling dwc3_gadget_ep_get_transfer_index() after
sending a Start Transfer command, we can call it once from
dwc3_send_gadget_ep_cmd() itself.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Instead of returning resource index number just to assign it to a
field inside 'dep' which was passed as argument, we can assing
dep->resource_index from inside dwc3_gadget_ep_get_transfer_index()
itself.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

We will *always* start transfer to the next uFrame number aligned to
dep->interval.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

In case we have many started requests and one of them in the middle is
completed with Missed Isoc, let's not End Transfer as that would
result in us loosing (possibly) many more intervals.

Instead, let's allow the controller to go through its list of started
requests.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

XferNotReady and XferInProgress give us the uFrame number we're
currently in. Printing that out on tracepoints may help us find bugs
in transfer scheduling.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Avoid a prototype when the function can be defined earlier. No
functional changes, cleanup only.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Instead of having a prototype for a function that's defined a few
lines down, let's just move definition to the place where prototype
was.

No functional changes, cleanup only.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

In a few places, the argument is completely unnecessary. On places
where it's needed, we can get it from dep->dwc.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Those two arguments refer to a single bitfield in the register. In
order to simplify the code, we can combine them into a single argument
and expect caller to pass the correct action argument at all times.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

This just makes it slightly easier to read. No functional changes.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

No functional changes, it just makes the code slightly easier to read.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Code is just as readable without it.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

We can declare it inside list_for_each_entry_safe() loop and reduce
its scope.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Misc cleanup. No functional changes.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

We will only have event status of IOC when IOC bit is set in
TRB. There's no need to check both bits.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

We know that only OUT endpoints can trigger SHORT. We also know that
count MUST be > 0 whenever SHORT triggers.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

This will make it easier to figure out the reason for the event. That
information really helps debugging certain problems.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

We can just call reclaim_trb_linear instead of reimplementing it.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Minor cleanup, no functional changes.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

We are trying to kick transfers on Isochronous endpoints in a more
controlled manner now. And this ended up rendering this piece of code
unnecessary.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

instead of having one big loop, let's split it down into two smaller
handlers: one for linear buffers and one for scatterlist.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Just a minor simplification, no functional changes.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

After all the previous changes, it's now a lot clearer how isoc
transfers should be managed. We don't need to try to End Transfers
from ep_queue since that's already done by cleanup_requests.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Now, this part of the code is duplicated and brings no extra value to
the driver. Let's remove it.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

In case we get an event with status set to Missed Isoc, this means we
have missed an isochronous interval and should issue End Transfer
command and wait for the following XferNotReady.

Let's do that early, rather than late.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

It's only written to, never read. We can remove it now.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

We don't need to return a value anymore here. Let's remove it.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

It has no use anymore.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

By now, it has the same semantics as DWC3_EP_TRANSFER_STARTED, but
that has a much more descriptive name.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

We will need an up-to-date frame_number from XferInProgress too when
future patches improve our handling of Isoc endpoints.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

The core requires the extra two bits of information for properly
scheduling Isochronous transfers. This means that we can't rely on
__dwc3_gadget_get_frame(). Let's always cache uFrame number from
XferNotReady instead.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Endpoint handlers need to know about endpoints, not dwc. If they
really need access to dwc (e.g. for printing error messages) we have a
reference to it tucked inside the endpoint.

This patch has no functional changes, it's simply moving things around.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>