While output urb's snd_complete_urb() is executing, calling
prepare_outbound_urb() may cause endpoint stopped before
prepare_outbound_urb() returns and result in next urb submitted
to stopped endpoint. usb-audio driver cannot re-use it afterwards as
the urb is still hold by usb stack.

This change checks EP_FLAG_RUNNING flag after prepare_outbound_urb() again
to let snd_complete_urb() know the endpoint already stopped and does not
submit next urb. Below kind of error will be fixed:

[  213.153103] usb 1-2: timeout: still 1 active urbs on EP #1
[  213.164121] usb 1-2: cannot submit urb 0, error -16: unknown error
Signed-off-by: NHenry Lin <henryl@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191113021420.13377-1-henryl@nvidia.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>

Apply same logic to pin setup as on previous platforms. Fixes
errors in HDMI/DP playback.

Tested with both snd-hda-intel and SOF drivers.

Fixes: 9a11ba73 ("ALSA: hda: hdmi - add Tigerlake support")
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191111133838.21213-1-kai.vehmanen@linux.intel.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>

Add HD Audio Device PCI ID for the Intel Cometlake-S platform
Signed-off-by: NChiou, Cooper <cooper.chiou@intel.com>
Link: https://lore.kernel.org/r/20191108071349.12840-1-cooper.chiou@intel.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>

A check of the return value from get_cur_mix_raw() is missing at the
resolution test code in get_min_max_with_quirks(), which may leave the
variable untouched, leading to a random uninitialized value, as
detected by syzkaller fuzzer.

Add the missing return error check for fixing that.

Reported-and-tested-by: syzbot+abe1ab7afc62c6bb6377@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191109181658.30368-1-tiwai@suse.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v5.4-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.4

These are a collection of fixes since v5.4-rc4 that have accumilated,
they're all driver specific and there's nothing major in here so it's
probably not essential to actually send them but I'll leave that call to
you.

The clean up commit 41672c0c ("ALSA: timer: Simplify error path in
snd_timer_open()") unified the error handling code paths with the
standard goto, but it introduced a subtle bug: the timer instance is
stored in snd_timer_open() incorrectly even if it returns an error.
This may eventually lead to UAF, as spotted by fuzzer.

The culprit is the snd_timer_open() code checks the
SNDRV_TIMER_IFLG_EXCLUSIVE flag with the common variable timeri.
This variable is supposed to be the newly created instance, but we
(ab-)used it for a temporary check before the actual creation of a
timer instance.  After that point, there is another check for the max
number of instances, and it bails out if over the threshold.  Before
the refactoring above, it worked fine because the code returned
directly from that point.  After the refactoring, however, it jumps to
the unified error path that stores the timeri variable in return --
even if it returns an error.  Unfortunately this stored value is kept
in the caller side (snd_timer_user_tselect()) in tu->timeri.  This
causes inconsistency later, as if the timer was successfully
assigned.

In this patch, we fix it by not re-using timeri variable but a
temporary variable for testing the exclusive connection, so timeri
remains NULL at that point.

Fixes: 41672c0c ("ALSA: timer: Simplify error path in snd_timer_open()")
Reported-and-tested-by: NTristan Madani <tristmd@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191106165547.23518-1-tiwai@suse.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>

When using the example SOF amp widget topology, KASAN dumps this
when the AMP bytes kcontrol gets loaded:

[ 9.579548] BUG: KASAN: slab-out-of-bounds in
sof_control_load+0x8cc/0xac0 [snd_sof]
[ 9.588194] Write of size 40 at addr ffff8882314559dc by task
systemd-udevd/2411

Fix that by rejecting the topology if the bytes data size > max_size

Fixes: 311ce4fe ("ASoC: SOF: Add support for loading topologies")
Reviewed-by: NJaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: NDragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191106145816.9367-1-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

Add Tigerlake HDMI codec support.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205379
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=112171
Cc: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191105161053.22958-1-kai.vehmanen@linux.intel.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>

Use devm_gpio_request() to automatic unroll when fails and avoid
resource leaks at error paths.
Signed-off-by: NYong Zhi <yong.zhi@intel.com>
Link: https://lore.kernel.org/r/1572905399-22402-1-git-send-email-yong.zhi@intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

Do not support mmap in S/PDIF mode. In S/PDIF mode
the buffer has to be copied, to allow the channel status
bits insertion.
Signed-off-by: NOlivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191104133654.28750-1-olivier.moysan@st.comSigned-off-by: NMark Brown <broonie@kernel.org>

The unsolicited event handler for the headphone jack on CA0132 codec
driver tries to reschedule the another delayed work with
cancel_delayed_work_sync().  It's no good idea, unfortunately,
especially after we changed the work queue to the standard global
one; this may lead to a stall because both works are using the same
global queue.

Fix it by dropping the _sync but does call cancel_delayed_work()
instead.

Fixes: 993884f6 ("ALSA: hda/ca0132 - Delay HP amp turnon.")
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1155836
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191105134316.19294-1-tiwai@suse.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>

When ASoC card instance is removed containing a HDA codec,
hdac_hda_codec_remove() may run in parallel with codec resume.
This will cause problems if the HDA link is freed with
snd_hdac_ext_bus_link_put() while the codec is still in
middle of its resume process.

To fix this, change the order such that pm_runtime_disable()
is called before the link is freed. This will ensure any
pending runtime PM action is completed before proceeding
to free the link.

This issue can be easily hit with e.g. SOF driver by loading and
unloading the drivers.
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101170635.26389-1-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

For Focusrite Saffire Pro i/o, the lowest 8 bits of register represents
configured source of sampling clock. The next lowest 8 bits represents
whether the configured source is actually detected or not just after
the register is changed for the source.

Current implementation evaluates whole the register to detect configured
source. This results in failure due to the next lowest 8 bits when the
source is connected in advance.

This commit fixes the bug.

Fixes: 25784ec2 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series")
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191102150920.20367-1-o-takashi@sakamocchi.jpSigned-off-by: NTakashi Iwai <tiwai@suse.de>

When a card is disconnected while in use, the system waits until all
opened files are closed then releases the card.  This is done via
put_device() of the card device in each device release code.

The recently reported mutex deadlock bug happens in this code path;
snd_timer_close() for the timer device deals with the global
register_mutex and it calls put_device() there.  When this timer
device is the last one, the card gets freed and it eventually calls
snd_timer_free(), which has again the protection with the global
register_mutex -- boom.

Basically put_device() call itself is race-free, so a relative simple
workaround is to move this put_device() call out of the mutex.  For
achieving that, in this patch, snd_timer_close_locked() got a new
argument to store the card device pointer in return, and each caller
invokes put_device() with the returned object after the mutex unlock.
Reported-and-tested-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit ade49db3 ("ALSA: hda/hdmi - Allow audio component for
AMD/ATI and Nvidia HDMI") introduced the spec->pcm_lock mutex lock to
the whole generic_hdmi_init() function for avoiding the race with the
audio component registration.  However, this caused a dead lock when
the unsolicited event is handled without the audio component, as the
codec gets runtime-resumed in hdmi_present_sense() which is already
inside the spec->pcm_lock in its caller.

For avoiding this deadlock, add a new mutex only for the audio
component binding that is used in both generic_hdmi_init() and the
audio notifier registration where the jack callbacks are handled /
re-registered.

Fixes: ade49db3 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI")
Reported-and-tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/s5himo7i89i.wl-tiwai@suse.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>

max98090 spec states that chip needs to be in turned-on state to supply
mic bias. Enable SHDN dapm widget along with MICBIAS widget to
actually turn on mic bias for proper headset button detection.
This is similar to cht_ti_jack_event in
sound/soc/intel/boards/cht_bsw_max98090_ti.c.

Note that due to ts3a227e reports the jack event right away before the
notifier is registered, if headset is plugged on boot, headset button
will not get detected until headset is unplugged and plugged. This is
still an issue to be fixed.
Signed-off-by: NCheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20191028095229.99438-1-cychiang@chromium.orgSigned-off-by: NMark Brown <broonie@kernel.org>

When non standard names are used it is possible that one of the directions
are not provided, thus the flags needs to be present to tell the core that
we have half duplex setup.

Fixes: 642aafea ("ASoC: ti: remove compat dma probing")
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191028115207.5142-1-peter.ujfalusi@ti.comSigned-off-by: NMark Brown <broonie@kernel.org>

In the implementation of sof_set_get_large_ctrl_data() there is a memory
leak in case an error. Release partdata if sof_get_ctrl_copy_params()
fails.

Fixes: 54d198d5 ("ASoC: SOF: Propagate sof_get_ctrl_copy_params() error properly")
Signed-off-by: NNavid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20191027215330.12729-1-navid.emamdoost@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

In the implementation of sof_dfsentry_write() memory allocated for
string is leaked in case of an error. Go to error handling path if the
d_name.name is not valid.

Fixes: 091c12e1 ("ASoC: SOF: debug: add new debugfs entries for IPC flood test")
Signed-off-by: NNavid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20191027194856.4056-1-navid.emamdoost@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

We are missing the 'CONFIG_' prefix when using the kernel configure item
SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1, here correct them.

Fixes: 43b2ab90 ('ASoC: SOF: Intel: hda: Disable DMI L1 entry during capture')
Signed-off-by: NKeyon Jie <yang.jie@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025221538.6668-1-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

This reverts commit caa8422d.

It turned out that this commit caused a regression at shutdown /
reboot, as the synchronize_irq() calls seems blocking the whole
shutdown.  Also another part of the change about shuffling the call
order looks suspicious; the azx_stop_chip() call disables the CORB /
RIRB while the others may still need the CORB/RIRB update.

Since the original commit itself was a cargo-fix, let's revert the
whole patch.

Fixes: caa8422d ("ALSA: hda: Flush interrupts on disabling")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205333
BugLinK: https://bugs.freedesktop.org/show_bug.cgi?id=111174Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/20191028081056.22010-1-tiwai@suse.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>

A helper function of ALSA bebob driver returns negative value in a
function which has a prototype to return unsigned value.

This commit fixes it by changing the prototype.

Fixes: eb7b3a05 ("ALSA: bebob: Add commands and connections/streams management")
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191026030620.12077-1-o-takashi@sakamocchi.jpSigned-off-by: NTakashi Iwai <tiwai@suse.de>

These 2 ThinkCentres installed a new realtek codec ID 0x623,
it has 2 front mics with the same location on pin 0x18 and 0x19.

Apply fixup ALC283_FIXUP_HEADSET_MIC to change 1 front mic
location to right, then pulseaudio can handle them.
One "Front Mic" and one "Mic" will be shown, and audio output works
fine.
Signed-off-by: NAaron Ma <aaron.ma@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191024114439.31522-1-aaron.ma@canonical.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>

Support new codec ALC623.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ed97b6a8bd9445ecb48bc763d9aaba7a@realtek.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds native DSD support for Gustard U16/X26 USB Interface.
Tested using VID and fp->dsd_raw method.
Signed-off-by: NJustin Song <flyingecar@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CA+9XP1ipsFn+r3bCBKRinQv-JrJ+EHOGBdZWZoMwxFv0R8Y1MQ@mail.gmail.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>

The devm conversion of kirkwood was incorrect; on removal, devm takes
effect after the "remove" function has returned.  So, the effect of
the conversion was to change the order during remove from:

  - snd_soc_unregister_component() (unpublishes interfaces)
  - clk_disable_unprepare()
  - cleanup resources

After the conversion, this became:

  - clk_disable_unprepare() - while the device may still be active
  - snd_soc_unregister_component()
  - cleanup resources

Hence, it introduces a bug, where the internal clock for the device
may be shut down before the device itself has been shut down.  It is
known that Marvell SoCs, including Dove, locks up if registers for a
peripheral that has its clocks disabled are accessed.

Fixes: f98fc0f8 ("ASoC: kirkwood: replace platform to component")
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1iNGyP-0004oN-BA@rmk-PC.armlinux.org.ukSigned-off-by: NMark Brown <broonie@kernel.org>

Currently each SSI unit's busif dma address is calculated by
following calculation formula:
0xec540000 + 0x1000 * id + busif / 4 * 0xA000 + busif % 4 * 0x400

But according to R-Car3 HW manual 41.1.4 Register Configuration,
ssi9 4/5/6/7 busif data register address
(SSI9_4_BUSIF/SSI9_5_BUSIF/SSI9_6_BUSIF/SSI9_7_BUSIF)
are out of this rule.

This patch updates the calculation formula to correct
ssi9 4/5/6/7 busif data register address.

Fixes: 5e45a6fa ("ASoc: rsnd: dma: Calculate dma address with consider of BUSIF")
Signed-off-by: NJiada Wang <jiada_wang@mentor.com>
Signed-off-by: NTimo Wischer <twischer@de.adit-jv.com>
[erosca: minor improvements in commit description]
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: NEugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191022185429.12769-1-erosca@de.adit-jv.comSigned-off-by: NMark Brown <broonie@kernel.org>

This reverts commit eb1ecadb.

This fixes the following warning reported by lockdep and a potential
issue with hibernation

====================================
WARNING: pulseaudio/1297 still has locks held!
5.3.0+ #1826 Not tainted
------------------------------------
1 lock held by pulseaudio/1297:
 #0: ee815308 (&hcp->lock){....}, at: hdmi_codec_startup+0x20/0x130

stack backtrace:
CPU: 0 PID: 1297 Comm: pulseaudio Not tainted 5.3.0+ #1826
Hardware name: Marvell Dove (Cubox)
[<c0017b4c>] (unwind_backtrace) from [<c0014d10>] (show_stack+0x10/0x14)
[<c0014d10>] (show_stack) from [<c00a2d18>] (futex_wait_queue_me+0x13c/0x19c)
[<c00a2d18>] (futex_wait_queue_me) from [<c00a3630>] (futex_wait+0x184/0x24c)
[<c00a3630>] (futex_wait) from [<c00a5e1c>] (do_futex+0x334/0x598)
[<c00a5e1c>] (do_futex) from [<c00a62e8>] (sys_futex_time32+0x118/0x180)
[<c00a62e8>] (sys_futex_time32) from [<c0009000>] (ret_fast_syscall+0x0/0x54)
Exception stack(0xebd31fa8 to 0xebd31ff0)
1fa0:                   00000000 ffffffff 000c8748 00000189 00000001 00000000
1fc0: 00000000 ffffffff 00000000 000000f0 00000000 00000000 00000000 00056200
1fe0: 000000f0 beac03a8 b6d6c835 b6d6f456

Fixes: eb1ecadb ("ASoC: hdmi-codec: re-introduce mutex locking")
Reported-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20191023161203.28955-2-jbrunet@baylibre.comSigned-off-by: NMark Brown <broonie@kernel.org>

When our call to get the external clock fails, we forget to clean up
the enabled internal clock correctly.  Enable the clock after we have
obtained all our resources.

Fixes: 84aac6c7 ("ASoC: kirkwood: fix loss of external clock at probe time")
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1iNGyK-0004oF-6A@rmk-PC.armlinux.org.ukSigned-off-by: NMark Brown <broonie@kernel.org>

Add HD Audio Device PCI ID for the Intel Tigerlake and Jasperlake
platform.
Signed-off-by: NPan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022194402.23178-1-pierre-louis.bossart@linux.intel.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>

The recently introduced USB-audio descriptor validator had a stupid
copy&paste error that may lead to an unexpected overlook of too short
descriptors for processing and extension units.  It's likely the cause
of the report triggered by syzkaller fuzzer.  Let's fix it.

Fixes: 57f87706 ("ALSA: usb-audio: More validations of descriptor units")
Reported-by: syzbot+0620f79a1978b1133fd7@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/s5hsgnkdbsl.wl-tiwai@suse.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>

Parameter fragments and fragment_size are type of u32. U32_MAX is
the correct check.
Signed-off-by: NXiaojun Sang <xsang@codeaurora.org>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: NVinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20191021095432.5639-1-srinivas.kandagatla@linaro.orgSigned-off-by: NMark Brown <broonie@kernel.org>

According to the PM8916 Hardware Register Description,
CDC_D_CDC_CONN_HPHR_DAC_CTL has only a single bit (RX_SEL)
to switch between RX1 (0) and RX2 (1). It is not possible to
disable it entirely to achieve the "ZERO" state.

However, at the moment the "RDAC2 MUX" mixer defines three possible
values ("ZERO", "RX2" and "RX1"). Setting the mixer to "ZERO"
actually configures it to RX1. Setting the mixer to "RX1" has
(seemingly) no effect.

Remove "ZERO" and replace it with "RX1" to fix this.

Fixes: 585e881e ("ASoC: codecs: Add msm8916-wcd analog codec")
Signed-off-by: NStephan Gerhold <stephan@gerhold.net>
Acked-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191020153007.206070-1-stephan@gerhold.netSigned-off-by: NMark Brown <broonie@kernel.org>

Merge tag 'asoc-fix-v5.4-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.4

A collection of fixes that have arrived since the merge window.  There
are a small number of core fixes here but they are smaller ones around
error handling.

Support new codec ALC711.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

All the kcontrol put() functions are currently returning 0 when
successful. This does not go well with alsamixer as it does
not seem to get notified on SND_CTL_EVENT_MASK_VALUE callbacks
when values change for (some of) the sof kcontrols.
This patch fixes that by returning true for volume, switch
and enum type kcontrols when values do change in put().
Signed-off-by: NDragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191018123806.18063-1-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

The commit below, adds a call to sysclk callback on shutdown.
This introduces a regression in stm32 SAI driver, as some clock
services are called twice, leading to unbalanced calls.
Move processing related to mclk from shutdown to sysclk callback.
When requested frequency is 0, assume shutdown and release mclk.

Fixes: 2458adb8 ("SoC: simple-card-utils: set 0Hz to sysclk when shutdown")
Signed-off-by: NOlivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191018082040.31022-1-olivier.moysan@st.comSigned-off-by: NMark Brown <broonie@kernel.org>

sof_audio_probe misses a check for devm_clk_get and may cause problems.
Add a check for it to fix the bug.
Signed-off-by: NChuhong Yuan <hslester96@gmail.com>
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191017025044.31474-1-hslester96@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

Unlike other format-related DAI parameters, rdai->bit_clk_inv flag
is not properly re-initialized when setting format for new stream
processing. The inversion, if requested, is then applied not to default,
but to a previous value, which leads to SCKP bit in SSICR register being
set incorrectly.
Fix this by re-setting the flag to its initial value, determined by format.

Fixes: 1a7889ca ("ASoC: rsnd: fixup SND_SOC_DAIFMT_xB_xF behavior")
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Timo Wischer <twischer@de.adit-jv.com>
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: NJunya Monden <jmonden@jp.adit-jv.com>
Signed-off-by: NEugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191016124255.7442-1-erosca@de.adit-jv.comSigned-off-by: NMark Brown <broonie@kernel.org>

Przemysław Kopa reports that since commit b516ea58 ("PCI: Enable
NVIDIA HDA controllers"), the discrete GPU Nvidia GeForce GT 540M on his
2011 Samsung laptop refuses to runtime suspend, resulting in a power
regression and excessive heat.

Rivera Valdez witnesses the same issue with a GeForce GT 525M (GF108M)
of the same era, as does another Arch Linux user named "R0AR" with a
more recent GeForce GTX 1050 Ti (GP107M).

The commit exposes the discrete GPU's HDA controller and all four codecs
on the controller do not set the CLKSTOP and EPSS bits in the Supported
Power States Response.  They also do not set the PS-ClkStopOk bit in the
Get Power State Response.  hda_codec_runtime_suspend() therefore does
not call snd_hdac_codec_link_down(), which prevents each codec and the
PCI device from runtime suspending.

The same issue is present on some AMD discrete GPUs and we addressed it
by forcing runtime PM despite the bits not being set, see commit
57cb54e5 ("ALSA: hda - Force to link down at runtime suspend on
ATI/AMD HDMI").

Do the same for Nvidia HDMI codecs.

Fixes: b516ea58 ("PCI: Enable NVIDIA HDA controllers")
Link: https://bbs.archlinux.org/viewtopic.php?pid=1865512
Link: https://bugs.freedesktop.org/show_bug.cgi?id=75985#c81Reported-by: NPrzemysław Kopa <prymoo@gmail.com>
Reported-by: NRivera Valdez <riveravaldez@ysinembargo.com>
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Cc: Daniel Drake <dan@reactivated.net>
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/r/3086bc75135c1e3567c5bc4f3cc4ff5cbf7a56c2.1571324194.git.lukas@wunner.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>