The size of the data interval was not exported in the sysfs integrity
directory. Export it so that userland apps can tell whether the interval
is different from the device's logical block size.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

So far we have relied on the app tag size to determine whether a disk
has been formatted with T10 protection information or not. However, not
all target devices provide application tag storage.

Add a flag to the block integrity profile that indicates whether the
disk has been formatted with protection information.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@dev.mellanox.co.il>
Signed-off-by: NJens Axboe <axboe@fb.com>

The WRITE SAME command supported on some SCSI devices allows the same
block to be efficiently replicated throughout a block range. Only a
single logical block is transferred from the host and the storage device
writes the same data to all blocks described by the I/O.

This patch implements support for WRITE SAME in the block layer. The
blkdev_issue_write_same() function can be used by filesystems and block
drivers to replicate a buffer across a block range. This can be used to
efficiently initialize software RAID devices, etc.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This reverts commit a72c5e5e.

The commit introduced alias for block devices which is intended to be
used during logging although actual usage hasn't been committed yet.
This approach adds very limited benefit (raw log might be easier to
follow) which can be trivially implemented in userland but has a lot
of problems.

It is much worse than netif renames because it doesn't rename the
actual device but just adds conveninence name which isn't used
universally or enforced.  Everything internal including device lookup
and sysfs still uses the internal name and nothing prevents two
devices from using conflicting alias - ie. sda can have sdb as its
alias.

This has been nacked by people working on device driver core, block
layer and kernel-userland interface and shouldn't have been
upstreamed.  Revert it.

 http://thread.gmane.org/gmane.linux.kernel/1155104
 http://thread.gmane.org/gmane.linux.scsi/68632
 http://thread.gmane.org/gmane.linux.scsi/69776Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NKay Sievers <kay.sievers@vrfy.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Nao Nishijima <nao.nishijima.xt@hitachi.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch allows the user to set an "alias" of the disk via sysfs interface.

This patch only adds a new attribute "alias" in gendisk structure.
To show the alias instead of the device name in kernel messages,
we need to revise printk messages and use alias_name() in them.

Example:
(current) printk("disk name is %s\n", disk->disk_name);
(new)     printk("disk name is %s\n", alias_name(disk));

Users can use alphabets, numbers, '-' and '_' in "alias" attribute. A disk can
have an "alias" which length is up to 255 bytes. This attribute is write-once.
Suggested-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Suggested-by: NJon Masters <jcm@redhat.com>
Signed-off-by: NNao Nishijima <nao.nishijima.xt@hitachi.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Add documentation for the discard I/O topology parameters exported in
sysfs.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Updated 'nomerges' tunable to accept a value of '2' - indicating that _no_
merges at all are to be attempted (not even the simple one-hit cache).

The following table illustrates the additional benefit - 5 minute runs of
a random I/O load were applied to a dozen devices on a 16-way x86_64 system.

nomerges        Throughput      %System         Improvement (tput / %sys)
--------        ------------    -----------     -------------------------
0               12.45 MB/sec    0.669365609
1               12.50 MB/sec    0.641519199     0.40% / 2.71%
2               12.52 MB/sec    0.639849750     0.56% / 2.96%
Signed-off-by: NAlan D. Brunelle <alan.brunelle@hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.
Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Update topology comments and sysfs documentation based upon discussions
with Neil Brown.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

To support devices with physical block sizes bigger than 512 bytes we
need to ensure proper alignment.  This patch adds support for exposing
I/O topology characteristics as devices are stacked.

  logical_block_size is the smallest unit the device can address.

  physical_block_size indicates the smallest I/O the device can write
  without incurring a read-modify-write penalty.

  The io_min parameter is the smallest preferred I/O size reported by
  the device.  In many cases this is the same as the physical block
  size.  However, the io_min parameter can be scaled up when stacking
  (RAID5 chunk size > physical block size).

  The io_opt characteristic indicates the optimal I/O size reported by
  the device.  This is usually the stripe width for arrays.

  The alignment_offset parameter indicates the number of bytes the start
  of the device/partition is offset from the device's natural alignment.
  Partition tools and MD/DM utilities can use this to pad their offsets
  so filesystems start on proper boundaries.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Update the documentation to reflect the change in userspace interface.
Signed-off-by: NJerome Marchand <jmarchan@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>