Revert "xen/x86: Workaround 64-bit hypervisor and 32-bit initial domain." and "xen/x86: Use memblock_reserve for sensitive areas."

This reverts commit 806c312e and
commit 59b29440.

And also documents setup.c and why we want to do it that way, which
is that we tried to make the the memblock_reserve more selective so
that it would be clear what region is reserved. Sadly we ran
in the problem wherein on a 64-bit hypervisor with a 32-bit
initial domain, the pt_base has the cr3 value which is not
neccessarily where the pagetable starts! As Jan put it: "
Actually, the adjustment turns out to be correct: The page
tables for a 32-on-64 dom0 get allocated in the order "first L1",
"first L2", "first L3", so the offset to the page table base is
indeed 2. When reading xen/include/public/xen.h's comment
very strictly, this is not a violation (since there nothing is said
that the first thing in the page table space is pointed to by
pt_base; I admit that this seems to be implied though, namely
do I think that it is implied that the page table space is the
range [pt_base, pt_base + nt_pt_frames), whereas that
range here indeed is [pt_base - 2, pt_base - 2 + nt_pt_frames),
which - without a priori knowledge - the kernel would have
difficulty to figure out)." - so lets just fall back to the
easy way and reserve the whole region.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

instead of a big memblock_reserve. This way we can be more
selective in freeing regions (and it also makes it easier
to understand where is what).

[v1: Move the auto_translate_physmap to proper line]
[v2: Per Stefano suggestion add more comments]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

It mixed up the p2m_mid_missing with p2m_missing. Also
remove some extra spaces.
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When the frontend and the backend reside on the same domain, even if we
add pages to the m2p_override, these pages will never be returned by
mfn_to_pfn because the check "get_phys_to_machine(pfn) != mfn" will
always fail, so the pfn of the frontend will be returned instead
(resulting in a deadlock because the frontend pages are already locked).

INFO: task qemu-system-i38:1085 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
qemu-system-i38 D ffff8800cfc137c0     0  1085      1 0x00000000
 ffff8800c47ed898 0000000000000282 ffff8800be4596b0 00000000000137c0
 ffff8800c47edfd8 ffff8800c47ec010 00000000000137c0 00000000000137c0
 ffff8800c47edfd8 00000000000137c0 ffffffff82213020 ffff8800be4596b0
Call Trace:
 [<ffffffff81101ee0>] ? __lock_page+0x70/0x70
 [<ffffffff81a0fdd9>] schedule+0x29/0x70
 [<ffffffff81a0fe80>] io_schedule+0x60/0x80
 [<ffffffff81101eee>] sleep_on_page+0xe/0x20
 [<ffffffff81a0e1ca>] __wait_on_bit_lock+0x5a/0xc0
 [<ffffffff81101ed7>] __lock_page+0x67/0x70
 [<ffffffff8106f750>] ? autoremove_wake_function+0x40/0x40
 [<ffffffff811867e6>] ? bio_add_page+0x36/0x40
 [<ffffffff8110b692>] set_page_dirty_lock+0x52/0x60
 [<ffffffff81186021>] bio_set_pages_dirty+0x51/0x70
 [<ffffffff8118c6b4>] do_blockdev_direct_IO+0xb24/0xeb0
 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00
 [<ffffffff8118ca95>] __blockdev_direct_IO+0x55/0x60
 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00
 [<ffffffff811e91c8>] ext3_direct_IO+0xf8/0x390
 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00
 [<ffffffff81004b60>] ? xen_mc_flush+0xb0/0x1b0
 [<ffffffff81104027>] generic_file_aio_read+0x737/0x780
 [<ffffffff813bedeb>] ? gnttab_map_refs+0x15b/0x1e0
 [<ffffffff811038f0>] ? find_get_pages+0x150/0x150
 [<ffffffff8119736c>] aio_rw_vect_retry+0x7c/0x1d0
 [<ffffffff811972f0>] ? lookup_ioctx+0x90/0x90
 [<ffffffff81198856>] aio_run_iocb+0x66/0x1a0
 [<ffffffff811998b8>] do_io_submit+0x708/0xb90
 [<ffffffff81199d50>] sys_io_submit+0x10/0x20
 [<ffffffff81a18d69>] system_call_fastpath+0x16/0x1b

The explanation is in the comment within the code:

We need to do this because the pages shared by the frontend
(xen-blkfront) can be already locked (lock_page, called by
do_read_cache_page); when the userspace backend tries to use them
with direct_IO, mfn_to_pfn returns the pfn of the frontend, so
do_blockdev_direct_IO is going to try to lock the same pages
again resulting in a deadlock.

A simplified call graph looks like this:

pygrub                          QEMU
-----------------------------------------------
do_read_cache_page              io_submit
  |                              |
lock_page                       ext3_direct_IO
                                 |
                                bio_add_page
                                 |
                                lock_page

Internally the xen-blkback uses m2p_add_override to swizzle (temporarily)
a 'struct page' to have a different MFN (so that it can point to another
guest). It also can easily find out whether another pfn corresponding
to the mfn exists in the m2p, and can set the FOREIGN bit
in the p2m, making sure that mfn_to_pfn returns the pfn of the backend.

This allows the backend to perform direct_IO on these pages, but as a
side effect prevents the frontend from using get_user_pages_fast on
them while they are being shared with the backend.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This reverts commit b960d6c4.

If we have another thread (very likely) touched the list, we
end up hitting a problem "that the next element is wrong because
we should be able to cope with that. The problem is that the
next->next pointer would be set LIST_POISON1. " (Stefano's
comment on the patch).

Reverting for now.
Suggested-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Use list_for_each_entry_safe and remove the spin_lock acquisition in
m2p_find_override.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

During early bootup we can't use alloc_page, so to allocate
leaf pages in the P2M we need to use extend_brk. For that
we are utilizing the early_alloc_p2m and early_alloc_p2m_middle
functions to do the job for us. This function follows the
same logic as set_phys_to_machine.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

At the start of the function we were checking for idx != 0
and bailing out. And later calling extend_brk if idx != 0.

That is unnecessary so remove that checks.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

For identity cases we want to call reserve_brk only on the boundary
conditions of the middle P2M (so P2M[x][y][0] = extend_brk). This is
to work around identify regions (PCI spaces, gaps in E820) which are not
aligned on 2MB regions.

However for the case were we want to allocate P2M middle leafs at the
early bootup stage, irregardless of this alignment check we need some
means of doing that.  For that we provide the new argument.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We are going to be using the early_alloc_p2m (and
early_alloc_p2m_middle) code in follow up patches which
are not related to setting identity pages.

Hence lets move the code out in its own function and
rename them as appropiate.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Per Ian Campbell suggestion to defend against future breakage
in case we expand the P2M values, incorporate the defines
in the string array.
Suggested-by: NIan Campbell <Ian.Campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We could be referencing the last + 1 element of level_name[]
array which would cause a pointer exception, because of the
initial setup of lvl=4.

[v1: No need to do this for type_name, pointed out by Ian Campbell]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

If we want to use granted pages for AIO, changing the mappings of a user
vma and the corresponding p2m is not enough, we also need to update the
kernel mappings accordingly.
Currently this is only needed for pages that are created for user usages
through /dev/xen/gntdev. As in, pages that have been in use by the
kernel and use the P2M will not need this special mapping.
However there are no guarantees that in the future the kernel won't
start accessing pages through the 1:1 even for internal usage.

In order to avoid the complexity of dealing with highmem, we allocated
the pages lowmem.
We issue a HYPERVISOR_grant_table_op right away in
m2p_add_override and we remove the mappings using another
HYPERVISOR_grant_table_op in m2p_remove_override.
Considering that m2p_add_override and m2p_remove_override are called
once per page we use multicalls and hypercall batching.

Use the kmap_op pointer directly as argument to do the mapping as it is
guaranteed to be present up until the unmapping is done.
Before issuing any unmapping multicalls, we need to make sure that the
mapping has already being done, because we need the kmap->handle to be
set correctly.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
[v1: Removed GRANT_FRAME_BIT usage]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We use the page->private field and hence should use the proper
macros and set proper bits. Also WARN_ON in case somebody
tries to overwrite our data.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We dropped a lot of the MMU debugfs in favour of using
tracing API - but there is one which just provides
mostly static information that was made invisible by this change.

Bring it back.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

If the backends, which use these two functions, are compiled as
a module we need these two functions to be exported.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We only supported the M2P (and P2M) override only for the
GNTMAP_contains_pte type mappings. Meaning that we grants
operations would "contain the machine address of the PTE to update"
If the flag is unset, then the grant operation is
"contains a host virtual address". The latter case means that
the Hypervisor takes care of updating our page table
(specifically the PTE entry) with the guest's MFN. As such we should
not try to do anything with the PTE. Previous to this patch
we would try to clear the PTE which resulted in Xen hypervisor
being upset with us:

(XEN) mm.c:1066:d0 Attempt to implicitly unmap a granted PTE c0100000ccc59067
(XEN) domain_crash called from mm.c:1067
(XEN) Domain 0 (vcpu#0) crashed on cpu#3:
(XEN) ----[ Xen-4.0-110228  x86_64  debug=y  Not tainted ]----

and crashing us.

This patch allows us to inhibit the PTE clearing in the PV guest
if the GNTMAP_contains_pte is not set.

On the m2p_remove_override path we provide the same parameter.

Sadly in the grant-table driver we do not have a mechanism to
tell m2p_remove_override whether to clear the PTE or not. Since
the grant-table driver is used by user-space, we can safely assume
that it operates only on PTE's. Hence the implementation for
it to work on !GNTMAP_contains_pte returns -EOPNOTSUPP. In the future
we can implement the support for this. It will require some extra
accounting structure to keep track of the page[i], and the flag.

[v1: Added documentation details, made it return -EOPNOTSUPP instead
 of trying to do a half-way implementation]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

.. when applicable. We need to track in the p2m_mfn and
p2m_mfn_p the MFNs and pointers, respectivly, for the P2M entries
that are allocated for the identity mappings. Without this,
a PV domain with an E820 that triggers the 1-1 mapping to kick in,
won't be able to be restored as the P2M won't have the identity
mappings.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

If the backends, which use these two functions, are compiled as
a module we need these two functions to be exported.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We only supported the M2P (and P2M) override only for the
GNTMAP_contains_pte type mappings. Meaning that we grants
operations would "contain the machine address of the PTE to update"
If the flag is unset, then the grant operation is
"contains a host virtual address". The latter case means that
the Hypervisor takes care of updating our page table
(specifically the PTE entry) with the guest's MFN. As such we should
not try to do anything with the PTE. Previous to this patch
we would try to clear the PTE which resulted in Xen hypervisor
being upset with us:

(XEN) mm.c:1066:d0 Attempt to implicitly unmap a granted PTE c0100000ccc59067
(XEN) domain_crash called from mm.c:1067
(XEN) Domain 0 (vcpu#0) crashed on cpu#3:
(XEN) ----[ Xen-4.0-110228  x86_64  debug=y  Not tainted ]----

and crashing us.

This patch allows us to inhibit the PTE clearing in the PV guest
if the GNTMAP_contains_pte is not set.

On the m2p_remove_override path we provide the same parameter.

Sadly in the grant-table driver we do not have a mechanism to
tell m2p_remove_override whether to clear the PTE or not. Since
the grant-table driver is used by user-space, we can safely assume
that it operates only on PTE's. Hence the implementation for
it to work on !GNTMAP_contains_pte returns -EOPNOTSUPP. In the future
we can implement the support for this. It will require some extra
accounting structure to keep track of the page[i], and the flag.

[v1: Added documentation details, made it return -EOPNOTSUPP instead
 of trying to do a half-way implementation]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Fix section mismatch warnings:
set_phys_range_identity() is called by __init xen_set_identity(),
so also mark set_phys_range_identity() as __init.
then:
__early_alloc_p2m() is called set_phys_range_identity(), so also mark
__early_alloc_p2m() as __init.

WARNING: arch/x86/built-in.o(.text+0x7856): Section mismatch in reference from the function __early_alloc_p2m() to the function .init.text:extend_brk()
The function __early_alloc_p2m() references
the function __init extend_brk().
This is often because __early_alloc_p2m lacks a __init
annotation or the annotation of extend_brk is wrong.

WARNING: arch/x86/built-in.o(.text+0x7967): Section mismatch in reference from the function set_phys_range_identity() to the function .init.text:extend_brk()
The function set_phys_range_identity() references
the function __init extend_brk().
This is often because set_phys_range_identity lacks a __init
annotation or the annotation of extend_brk is wrong.

[v2: Per Stephen Hemming recommonedation made __early_alloc_p2m static]
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

It is possible to add a p2m override on pages that are currently mapped
to INVALID_P2M_ENTRY; in particular, this will happen when using
ballooned pages in gntdev. This means that set_phys_to_machine must be
used instead of __set_phys_to_machine.
Signed-off-by: NDaniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We walk over the whole P2M tree and construct a simplified view of
which PFN regions belong to what level and what type they are.

Only enabled if CONFIG_XEN_DEBUG_FS is set.

[v2: UNKN->UNKNOWN, use uninitialized_var]
[v3: Rebased on top of mmu->p2m code split]
[v4: Fixed the else if]
Reviewed-by: NIan Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The initial bootup code uses set_phys_to_machine quite a lot, and after
bootup it would be used by the balloon driver. The balloon driver does have
mutex lock so this should not be necessary - but just in case, add
a WARN_ON if we do hit this scenario. If we do fail this, it is OK
to continue as there is a backup mechanism (VM_IO) that can bypass
the P2M and still set the _PAGE_IOMAP flags.

[v2: Change from WARN to BUG_ON]
[v3: Rebased on top of xen->p2m code split]
[v4: Change from BUG_ON to WARN]
Reviewed-by: NIan Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Our P2M tree structure is a three-level. On the leaf nodes
we set the Machine Frame Number (MFN) of the PFN. What this means
is that when one does: pfn_to_mfn(pfn), which is used when creating
PTE entries, you get the real MFN of the hardware. When Xen sets
up a guest it initially populates a array which has descending
(or ascending) MFN values, as so:

 idx: 0,  1,       2
 [0x290F, 0x290E, 0x290D, ..]

so pfn_to_mfn(2)==0x290D. If you start, restart many guests that list
starts looking quite random.

We graft this structure on our P2M tree structure and stick in
those MFN in the leafs. But for all other leaf entries, or for the top
root, or middle one, for which there is a void entry, we assume it is
"missing". So
 pfn_to_mfn(0xc0000)=INVALID_P2M_ENTRY.

We add the possibility of setting 1-1 mappings on certain regions, so
that:
 pfn_to_mfn(0xc0000)=0xc0000

The benefit of this is, that we can assume for non-RAM regions (think
PCI BARs, or ACPI spaces), we can create mappings easily b/c we
get the PFN value to match the MFN.

For this to work efficiently we introduce one new page p2m_identity and
allocate (via reserved_brk) any other pages we need to cover the sides
(1GB or 4MB boundary violations). All entries in p2m_identity are set to
INVALID_P2M_ENTRY type (Xen toolstack only recognizes that and MFNs,
no other fancy value).

On lookup we spot that the entry points to p2m_identity and return the identity
value instead of dereferencing and returning INVALID_P2M_ENTRY. If the entry
points to an allocated page, we just proceed as before and return the PFN.
If the PFN has IDENTITY_FRAME_BIT set we unmask that in appropriate functions
(pfn_to_mfn).

The reason for having the IDENTITY_FRAME_BIT instead of just returning the
PFN is that we could find ourselves where pfn_to_mfn(pfn)==pfn for a
non-identity pfn. To protect ourselves against we elect to set (and get) the
IDENTITY_FRAME_BIT on all identity mapped PFNs.

This simplistic diagram is used to explain the more subtle piece of code.
There is also a digram of the P2M at the end that can help.
Imagine your E820 looking as so:

                   1GB                                           2GB
/-------------------+---------\/----\         /----------\    /---+-----\
| System RAM        | Sys RAM ||ACPI|         | reserved |    | Sys RAM |
\-------------------+---------/\----/         \----------/    \---+-----/
                              ^- 1029MB                       ^- 2001MB

[1029MB = 263424 (0x40500), 2001MB = 512256 (0x7D100), 2048MB = 524288 (0x80000)]

And dom0_mem=max:3GB,1GB is passed in to the guest, meaning memory past 1GB
is actually not present (would have to kick the balloon driver to put it in).

When we are told to set the PFNs for identity mapping (see patch: "xen/setup:
Set identity mapping for non-RAM E820 and E820 gaps.") we pass in the start
of the PFN and the end PFN (263424 and 512256 respectively). The first step is
to reserve_brk a top leaf page if the p2m[1] is missing. The top leaf page
covers 512^2 of page estate (1GB) and in case the start or end PFN is not
aligned on 512^2*PAGE_SIZE (1GB) we loop on aligned 1GB PFNs from start pfn to
end pfn.  We reserve_brk top leaf pages if they are missing (means they point
to p2m_mid_missing).

With the E820 example above, 263424 is not 1GB aligned so we allocate a
reserve_brk page which will cover the PFNs estate from 0x40000 to 0x80000.
Each entry in the allocate page is "missing" (points to p2m_missing).

Next stage is to determine if we need to do a more granular boundary check
on the 4MB (or 2MB depending on architecture) off the start and end pfn's.
We check if the start pfn and end pfn violate that boundary check, and if
so reserve_brk a middle (p2m[x][y]) leaf page. This way we have a much finer
granularity of setting which PFNs are missing and which ones are identity.
In our example 263424 and 512256 both fail the check so we reserve_brk two
pages. Populate them with INVALID_P2M_ENTRY (so they both have "missing" values)
and assign them to p2m[1][2] and p2m[1][488] respectively.

At this point we would at minimum reserve_brk one page, but could be up to
three. Each call to set_phys_range_identity has at maximum a three page
cost. If we were to query the P2M at this stage, all those entries from
start PFN through end PFN (so 1029MB -> 2001MB) would return INVALID_P2M_ENTRY
("missing").

The next step is to walk from the start pfn to the end pfn setting
the IDENTITY_FRAME_BIT on each PFN. This is done in 'set_phys_range_identity'.
If we find that the middle leaf is pointing to p2m_missing we can swap it over
to p2m_identity - this way covering 4MB (or 2MB) PFN space.  At this point we
do not need to worry about boundary aligment (so no need to reserve_brk a middle
page, figure out which PFNs are "missing" and which ones are identity), as that
has been done earlier.  If we find that the middle leaf is not occupied by
p2m_identity or p2m_missing, we dereference that page (which covers
512 PFNs) and set the appropriate PFN with IDENTITY_FRAME_BIT. In our example
263424 and 512256 end up there, and we set from p2m[1][2][256->511] and
p2m[1][488][0->256] with IDENTITY_FRAME_BIT set.

All other regions that are void (or not filled) either point to p2m_missing
(considered missing) or have the default value of INVALID_P2M_ENTRY (also
considered missing). In our case, p2m[1][2][0->255] and p2m[1][488][257->511]
contain the INVALID_P2M_ENTRY value and are considered "missing."

This is what the p2m ends up looking (for the E820 above) with this
fabulous drawing:

   p2m         /--------------\
 /-----\       | &mfn_list[0],|                           /-----------------\
 |  0  |------>| &mfn_list[1],|    /---------------\      | ~0, ~0, ..      |
 |-----|       |  ..., ~0, ~0 |    | ~0, ~0, [x]---+----->| IDENTITY [@256] |
 |  1  |---\   \--------------/    | [p2m_identity]+\     | IDENTITY [@257] |
 |-----|    \                      | [p2m_identity]+\\    | ....            |
 |  2  |--\  \-------------------->|  ...          | \\   \----------------/
 |-----|   \                       \---------------/  \\
 |  3  |\   \                                          \\  p2m_identity
 |-----| \   \-------------------->/---------------\   /-----------------\
 | ..  +->+                        | [p2m_identity]+-->| ~0, ~0, ~0, ... |
 \-----/ /                         | [p2m_identity]+-->| ..., ~0         |
        / /---------------\        | ....          |   \-----------------/
       /  | IDENTITY[@0]  |      /-+-[x], ~0, ~0.. |
      /   | IDENTITY[@256]|<----/  \---------------/
     /    | ~0, ~0, ....  |
    |     \---------------/
    |
    p2m_missing             p2m_missing
/------------------\     /------------\
| [p2m_mid_missing]+---->| ~0, ~0, ~0 |
| [p2m_mid_missing]+---->| ..., ~0    |
\------------------/     \------------/

where ~0 is INVALID_P2M_ENTRY. IDENTITY is (PFN | IDENTITY_BIT)
Reviewed-by: NIan Campbell <ian.campbell@citrix.com>
[v5: Changed code to use ranges, added ASCII art]
[v6: Rebased on top of xen->p2m code split]
[v4: Squished patches in just this one]
[v7: Added RESERVE_BRK for potentially allocated pages]
[v8: Fixed alignment problem]
[v9: Changed 1<<3X to 1<<BITS_PER_LONG-X]
[v10: Copied git commit description in the p2m code + Add Review tag]
[v11: Title had '2-1' - should be '1-1' mapping]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

With this patch, we diligently set regions that will be used by the
balloon driver to be INVALID_P2M_ENTRY and under the ownership
of the balloon driver. We are OK using the __set_phys_to_machine
as we do not expect to be allocating any P2M middle or entries pages.
The set_phys_to_machine has the side-effect of potentially allocating
new pages and we do not want that at this stage.

We can do this because xen_build_mfn_list_list will have already
allocated all such pages up to xen_max_p2m_pfn.

We also move the check for auto translated physmap down the
stack so it is present in __set_phys_to_machine.

[v2: Rebased with mmu->p2m code split]
Reviewed-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Both xen_hvm_init_shared_info and xen_build_mfn_list_list can be
called at resume time as well as at start of day but only reference
__init functions (extend_brk) at start of day. Hence annotate with
__ref.

    WARNING: arch/x86/built-in.o(.text+0x4f1): Section mismatch in reference
        from the function xen_hvm_init_shared_info() to the function
        .init.text:extend_brk()
    The function xen_hvm_init_shared_info() references
    the function __init extend_brk().
    This is often because xen_hvm_init_shared_info lacks a __init
    annotation or the annotation of extend_brk is wrong.

xen_hvm_init_shared_info calls extend_brk() iff !shared_info_page and
initialises shared_info_page with the result. This happens at start of
day only.

    WARNING: arch/x86/built-in.o(.text+0x599b): Section mismatch in reference
        from the function xen_build_mfn_list_list() to the function
        .init.text:extend_brk()
    The function xen_build_mfn_list_list() references
    the function __init extend_brk().
    This is often because xen_build_mfn_list_list lacks a __init
    annotation or the annotation of extend_brk is wrong.

(this warning occurs multiple times)

xen_build_mfn_list_list only calls extend_brk() at boot time, while
building the initial mfn list list
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

 CC      arch/x86/xen/p2m.o
arch/x86/xen/p2m.c: In function 'm2p_remove_override':
arch/x86/xen/p2m.c:460: warning: 'address' may be used uninitialized in this function
arch/x86/xen/p2m.c: In function 'm2p_add_override':
arch/x86/xen/p2m.c:426: warning: 'address' may be used uninitialized in this function

In actual fact address is inialised in one "if (!PageHighMem(page))"
statement and used in a second and so is always initialised before
use.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

In case the mfn_list does not have enough entries to fill
a p2m page we do not want the entries from max_pfn up to
the boundary to be filled with unknown values. Hence
set them to INVALID_P2M_ENTRY.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

After changing the p2m mapping to a tree by

  commit 58e05027
    xen: convert p2m to a 3 level tree

and trying to boot a DomU with 615MB of memory, the following crash was
observed in the dump:

kernel direct mapping tables up to 26f00000 @ 1ec4000-1fff000
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<c0107397>] xen_set_pte+0x27/0x60
*pdpt = 0000000000000000 *pde = 0000000000000000

Adding further debug statements showed that when trying to set up
pfn=0x26700 the returned mapping was invalid.

pfn=0x266ff calling set_pte(0xc1fe77f8, 0x6b3003)
pfn=0x26700 calling set_pte(0xc1fe7800, 0x3)

Although the last_pfn obtained from the startup info is 0x26700, which
should in turn not be hit, the additional 8MB which are added as extra
memory normally seem to be ok. This lead to looking into the initial
p2m tree construction, which uses the smaller value and assuming that
there is other code handling the extra memory.

When the p2m tree is set up, the leaves are directly pointed to the
array which the domain builder set up. But if the mapping is not on a
boundary that fits into one p2m page, this will result in the last leaf
being only partially valid. And as the invalid entries are not
initialized in that case, things go badly wrong.

I am trying to fix that by checking whether the current leaf is a
complete map and if not, allocate a completely new page and copy only
the valid pointers there. This may not be the most efficient or elegant
solution, but at least it seems to allow me booting DomUs with memory
assignments all over the range.

BugLink: http://bugs.launchpad.net/bugs/686692
[v2: Redid a bit of commit wording and fixed a compile warning]
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Fixes:
ERROR: "m2p_find_override_pfn" [drivers/block/xen-blkfront.ko] undefined!
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When adding a page to m2p_override we change the p2m of the page so we
need to also clear the old pte of the kernel linear mapping because it
doesn't correspond anymore.

When we remove the page from m2p_override we restore the original p2m of
the page and we also restore the old pte of the kernel linear mapping.

Before changing the p2m mappings in m2p_add_override and
m2p_remove_override, check that the page passed as argument is valid and
return an error if it is not.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

In m2p_add_override store the original mfn into page->index and then
change the p2m mapping, setting mfns as FOREIGN_FRAME.

In m2p_remove_override restore the original mapping.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Add a simple hashtable based mechanism to override some portions of the
m2p, so that we can find out the pfn corresponding to an mfn of a
granted page. In fact entries corresponding to granted pages in the m2p
hold the original pfn value of the page in the source domain that
granted it.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>