Use dev_to_hdac_dev() and to_ehdac_device() instead of open-coding.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Reviewed-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The upstreamed code modified the control names from Mute to
Switch without changing the logic. To get audio working the Switch
needs to be off which isn't aligned with normal ALSA conventions.

Inverting the logic now so that Switch Off means mute and Switch On
means active audio using the specific volume setting.
Signed-off-by: NSebastien Guiriec <sebastien.guiriec@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

the fields channels_min, channels_max, rate and formats are
irrelevant for compressed playback, they will depend on the
content. This was probably a copy-paste mistake to have
them in the first place
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

DSP firmware supports 24-bit data, expose functionality to
userspace/apps.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add dai links to enable additional playback stream with deeper
buffer for lower power consumption.
The normal and DEEP_buffer streams are not mutually exclusive,
content will be mixed by the DSP.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add definitions for MERR_DPCM_DEEP_BUFFER AND PIPE_MEDIA3_IN
Add relevant cpu-dai and dai link names
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

All the functionality was merged in DPCM-based driver,
keep older driver to avoid breaking userspace but
tag it as unsupported/deprecated
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Merge DMI quirks for various machines such as Asus T100
and clean-up code
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

first renaming and reducing delta with byt-rt5640 code before
dmi-based quirks are enabled
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

initial cleanup to use same pins
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Using the hw_fixup function in order to overwrite the default SSP
setting for Audio DSP port connected to the codec. Instead of
TDM 4ch use I2S 2ch 24 bits.
Signed-off-by: NSebastien Guiriec <sebastien.guiriec@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

When pipeline is deleted, set the pipeline state to invalid state.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds clean up routine to clear the stream registers and
calls this routine before setting up stream registers.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This machine supports HDMI/DP ports so add these ports and its FE and BE
DAIlinks
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NFang, Yang A <yang.a.fang@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

We have WOV module which should act as DAPM sink, so add that and
its links.

Also rename the refcap to "Wake On Voice" as some user expect to
find this name
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NFang, Yang A <yang.a.fang@intel.com>
Signed-off-by: NSathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

We have specific constraints for FE device (48KHz, stereo, 16
bits) and fixups for BE DMIC links (2 or 4 ch), so add those.

Also add one more FE DAIlink for dmiccap
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NFang, Yang A <yang.a.fang@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NYong Zhi <yong.zhi@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

We don't support ignore suspend on few devices so remove that.
Also since we support ignore susend on PDM DMIC, add that
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NYong Zhi <yong.zhi@intel.com>
Signed-off-by: NFang, Yang A <yang.a.fang@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The DAPM map for DMIC and SSP was not properly done, so fix that up.
Also mark machine as fully routed
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NFang, Yang A <yang.a.fang@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This adds Skylake I2S machine driver which uses NAU88L25 as anlog codec and
MAX98357A as speakers
Signed-off-by: NRohit Ainapure <rohit.m.ainapure@intel.com>
Signed-off-by: NFang, Yang A <yang.a.fang@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add the NAU88L25 + MAX98357A machine driver entry into
the machine table
Signed-off-by: NRohit Ainapure <rohit.m.ainapure@intel.com>
Signed-off-by: NFang, Yang A <yang.a.fang@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

"data" is a u32 pointer so this copies the information to wrong place
entirely.

Fixes: 140adfba ('ASoC: Intel: Skylake: Add tlv byte kcontrols')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Tested-by: NDharageswari R <dharageswari.r@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

These need to be signed because they hold negative error codes.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by Vinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

sst_memcpy32() only copied bytes/4 32bits, which means it dropped
the remaining bytes%4 bytes wrongly.

Here add copying those missing bytes, first to a 32bits tmp, and
then write the tmp to 32bits iomem.
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

If driver received a message that it can't handle, it won't
clear the corresponding bit and unmask interrupt, this may
lock the IRQ and DSP can't send message anymore.

To fix the issue, we should Always update IMRX after IPC.

Here we always clear the DONE/BUSY bit and unmask the IRQ
source, even when IPC failures have occurred previously.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Modified-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Merge branch 'topic/sink' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel

We should only add ignore suspend flag for some DAIs and not all.
This patches removes it from the DAIs where we do not support
this

It also marks the endpoints for which ignore_suspend should be
enabled
Signed-off-by: NPraveen Diwakar <praveen.diwakar@intel.com>
Signed-off-by: NVunny Sodhi <vunnyx.sodhi@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some of the usecases can be marked as 'ignore_suspend' by
machine. For these on suspend we should keep audio controller
ON by saving the state and not suspending the device

For this we need to maintain a counter for these streams and be
active on suspend when such a stream is opened.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

DAPM Machine map for machine was not specifying the paths
correctly.

The correct order should be:
"DMIC01 Rx" (SoC DMIC BE), connected to "DMIC AIF" (DMic Codec
AIF) and then "DMic" (DMic codec Input) connected to "SoC DMIC"
(Machine DMIC MIC Widget)
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Since in Skylake we support another DAI for DMIC quad capture,
add a dailink for this as well. Also specify constrains for DMIC
FE devices and fixup for DMIC BEs
Signed-off-by: NDharageswari.R <dharageswari.r@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

If a module is ON then we should read the module parameters from
DSP rather than driver cached values
Signed-off-by: NOmair M Abdullah <omair.m.abdullah@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For messages which have larger payload than mailbox data, we need
to split the payload using set of messages containing mailbox
size as payload.

For sending such payload we already support LARGE_CONFIG_SET
IPCs and now to query such payload add LARGE_CONFIG_GET IPC
Signed-off-by: NMousami Jana <mousami.janax@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

SKL actual mailbox size is 0x10000 and initial values were 0x800,
so update these accordingly
Signed-off-by: NOmair M Abdullah <omair.m.abdullah@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Module initialization parameter data can be set by
     - INIT_INSTANCE IPC by using the default value
     - SET_PARAMS immediately after INIT_INSTANCE
     - SET_PARAMS data from kcontrol values set
this patch add param type to identify the parameters
has to be sent to DSP.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Mic select is a DSP module which is used to select one or many
inputs to form an output. This is useful to select data
selectively from PDM input and hence the name. This module is of
generic module type.

This patch adds support to add and configure Mic select module in
firmware topology.
Signed-off-by: NDharageswari R <dharageswari.r@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

A module can require extra memory for processing, like audio
algorithms. The memory for these modules needs to be represented
in base module configuration and passed to DSP on init, so add
the memory pages as a field in widget data
Signed-off-by: NDharageswari.R <dharageswari.r@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

A module is loaded when the path consisting the module is opened.
The module binary(ies) is loaded from file system and cached in
kernel memory for future use. This is downloaded to DSP using DMA
and invoking Load module IPCs

This patch adds support for load/unload module IPCs, DMAing
modules and manging the modules
Signed-off-by: NDharageswari R <dharageswari.r@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This adds tlv bytes topology control creation and control load to
initialize kcontrol data. And this also adds the callbacks for
the these tlv byte kcontrols
Signed-off-by: NMythri P K <mythri.p.k@intel.com>
Signed-off-by: NDivya Prakash <divya1.prakash@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This adds support to configure module parameter during module
initialization or after module init using set module param
required by the DSP firmware sequence.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some DSP modules has user configurable parameters, which are
required by some modules at module initialization.

To configure the module algorithm parameter during initialization
we add helpers here
Signed-off-by: NDivya Prakash <divya1.prakash@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>