Top-level handling of standalone media interrupts will be processed as
part of the primary GT's interrupt handler (since primary and media GTs
share an MMIO space, unlike remote tile setups).  When we get down to
the point of handling engine interrupts, we need to take care to lookup
VCS and VECS engines in the media GT rather than the primary.

There are also a couple of additional "other" instance bits that
correspond to the media GT's GuC and media GT's power management
interrupts; we need to direct those to the media GT instance as well.

Bspec: 45605
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-15-matthew.d.roper@intel.comSigned-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Xe_LPM+ platforms have "standalone media."  I.e., the media unit is
designed as an additional GT with its own engine list, GuC, forcewake,
etc.  Let's allow platforms to include media GTs in their device info.

v2:
 - Simplify GSI register handling and split it out to a separate patch
   for ease of review.  (Daniele)

Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAravind Iddamsetty <aravind.iddamsetty@intel.com>
Acked-by: NAravind Iddamsetty <aravind.iddamsetty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-13-matthew.d.roper@intel.comSigned-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

On client DG2 platforms, optimal performance is achieved with the
hardware's default "age based" thread execution setting.  However on
ATS-M, switching this to "round robin after dependencies" provides
better performance.  We'll add a new "tuning" feature flag to the ATS-M
device info to enable/disable this setting.

Bspec: 68331
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826212718.409948-1-matthew.d.roper@intel.com

It is useful to be able to match GuC events to kernel events when
looking at the GuC log. That requires being able to convert GuC
timestamps to kernel time. So, when dumping error captures and/or GuC
logs, include a stamp in both time zones plus the clock frequency.
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NAlan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-4-John.C.Harrison@Intel.com

Some additional MMIO tuning settings have appeared in the bspec's
performance tuning guide section.

One of the tuning settings here is also documented as formal workaround
Wa_22012654132 for some steppings of DG2.  However the tuning setting
applies to all DG2 variants and steppings, making it a superset of the
workaround.

v2:
 - Move DRAW_WATERMARK to engine workaround section.  It only moves into
   the engine context on future platforms.  (Lucas)
 - CHICKEN_RASTER_2 needs to be handled as a masked register.  (Lucas)

Bspec: 68331
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816210601.2041572-2-matthew.d.roper@intel.com

Bspec: 46052
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NHarish Chegondi <harish.chegondi@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801213839.8549-1-harish.chegondi@intel.com

This workaround may need to be extended to other platforms soon, but for
now it's marked as DG2-specific.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NArun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708215804.2889246-1-matthew.d.roper@intel.com

A new PVC-specific workaround has just been added to the BSpec.

BSpec: 64027
Signed-off-by: NGustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630201407.16770-1-gustavo.sousa@intel.com

We've been introducing new registers with a mix of "XEHP_"
(architecture) and "XEHPSDV_" (platform) prefixes.  For consistency,
let's settle on "XEHP_" as the preferred form.

XEHPSDV_RP_STATE_CAP stays with its current name since that's truly a
platform-specific register and not something that applies to the Xe_HP
architecture as a whole.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NCaz Yokoyama <caz@caztech.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624210328.308630-2-matthew.d.roper@intel.com

XEHPSDV_FLAT_CCS_BASE_ADDR, GEN8_L3_LRA_1_GPGPU, and MMCD_MISC_CTRL were
duplicated between i915_reg.h and intel_gt_regs.h.  These are all GT
registers, so we should drop the copy from i915_reg.h.

XEHPSDV_TILE0_ADDR_RANGE was defined in i915_reg.h, but really belongs
in intel_gt_regs.h.  Move it.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624210328.308630-1-matthew.d.roper@intel.com

As with past platforms, the bspec's performance tuning guide provides
recommended MMIO settings.  Although not technically "workarounds" we
apply these through the workaround framework to ensure that they're
re-applied at the proper times (e.g., on engine resets) and that any
conflicts with real workarounds are flagged.

Bspec: 72161
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613165314.862029-1-matthew.d.roper@intel.com

A new PVC+DG2 workaround has appeared recently:
 - Wa_16015675438

And a couple existing DG2 workarounds have been extended to PVC:
 - Wa_14015795083
 - Wa_18018781329

Note that Wa_16015675438 asks us to program a register that is in the
0x2xxx range typically associated with the RCS engine, even though PVC
does not have an RCS.  By default the GuC will think we've made a
mistake and throw an exception when it sees this register on a CCS
engine's save/restore list, so we need to pass an extra GuC control flag
to tell it that this is expected and not a problem.
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NBadal Nilawar <badal.nilawar@intel.com>
Signed-off-by: NPrathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220608005108.3717895-1-matthew.d.roper@intel.com

i915 must disable Render DOP clock gating globally.

v2:
- Addressed cosmetic review comments.

Bspec: 52621
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607104542.8559-1-anshuman.gupta@intel.com

PVC splits the mask of enabled DSS over two registers.  It also changes
the meaning of the EU fuse register such that each bit represents a
single EU rather than a pair of EUs.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Acked-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NBalasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-7-matthew.d.roper@intel.com

Bspec: 64027
Signed-off-by: NStuart Summers <stuart.summers@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220527163348.1936146-3-matthew.d.roper@intel.com

Expose new sysfs to program and retrieve media freq factor. Factor values
of 0 (dynamic), 0.5 and 1.0 are supported via a u8.8 fixed point
representation (corresponding to integer values of 0, 128 and 256
respectively).

Media freq factor is converted to media_ratio_mode for GuC. It is
programmed into GuC using H2G SLPC interface. It is retrieved from GuC
through a register read. A cached media_ratio_mode is maintained to
preserve set values across GuC resets.

This patch adds the following sysfs files to gt/gtN sysfs:
* media_freq_factor
* media_freq_factor.scale

v2: Minor wording change in drm_warn (Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NDale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: NAndi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7ad7578335d8af9cba047b4bcf33d1887453d2e1.1653484574.git.ashutosh.dixit@intel.com

Signed-off-by: NSwathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220517212905.24212-1-swathi.dhanavanthri@intel.com

Add the reset support for new copy engines in PVC.

Bspec: 52549
Original-author: CQ Tang
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NStuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-11-matthew.d.roper@intel.com

Add the interrupt handler support for new copy engines.

Bspec: 54030
Original-author: CQ Tang
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NStuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-10-matthew.d.roper@intel.com

This patch adds the basic definitions needed to support
new copy engines. Also updating the cmd_info to accommodate
new engines, as the engine id's of legacy engines have been
changed.

v2:
 - Add _BCS(n) definition, similar to other engines.  (Tvrtko)
 - Add I915_MAX_BCS definition, similar to other engnes.  (Prathap)
 - Move GVT change to avoid u16 overflow to its own patch.  (Tvrtko)

Original-author: CQ Tang
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-9-matthew.d.roper@intel.com

Compute engines have a separate register that the driver should use to
perform MMIO-based TLB invalidation.

Note that the term "context" in this register's bspec description is
used to refer to the engine instance (in the same way "context" is used
on bspec 46167).

Bspec: 43930
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Acked-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NPrathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220428041926.1483683-3-matthew.d.roper@intel.com

GSC is a graphics system controller, it provides
a chassis controller for graphics discrete cards.

There are two MEI interfaces in GSC: HECI1 and HECI2.

Both interfaces are on the BAR0 at offsets 0x00258000 and 0x00259000.
GSC is a GT Engine (class 4: instance 6). HECI1 interrupt is signaled
via bit 15 and HECI2 via bit 14 in the interrupt register.

This patch exports GSC as auxiliary device for mei driver to bind to
for HECI2 interface and prepares for HECI1 interface as
it will follow up soon.

CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NVitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Acked-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419193314.526966-2-daniele.ceraolospurio@intel.com

Initiating a reset when the command streamer is not idle or in the
middle of executing an MI_FORCE_WAKE can result in a hang. Multiple
command streamers can be part of a single reset domain, so resetting one
would mean resetting all command streamers in that domain.

To workaround this, before initiating a reset, ensure that all command
streamers within that reset domain are either IDLE or are not executing
a MI_FORCE_WAKE.

Enable GuC PRE_PARSER WA bit so that GuC follows the WA sequence when
initiating engine-resets.

For gt-resets, ensure that i915 applies the WA sequence.

Opens to address in future patches:
- The part of the WA to wait for pending forcewakes is also applicable
  to execlists backend.
- The WA also needs to be applied for gen11
Signed-off-by: NUmesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-3-umesh.nerlige.ramappa@intel.com

Because VLV_GT_RENDER_RC6 == GEN6_GT_GFX_RC6, the IS_VALLEYVIEW() check is
not needed. Neither is the check present in other code paths which call
intel_rc6_residency_ns() (in functions gen6_drpc(), rc6_residency() and
rc6_residency_ms_show()).

v2: Elimintate VLV_GT_RENDER_RC6 #define (Jani)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: NBadal Nilawar <badal.nilawar@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220314161310.6468-1-ashutosh.dixit@intel.com

New DG2 workaround added to specification.

BSpec: 54077
BSpec: 66622
BSpec: 54833
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325142249.81443-1-jose.souza@intel.com

Upcoming patches will need to steer writes to multicast registers as
well as reading them.

Although the setting of the 'multicast' bit should only really matter
for write operations (reads always operate in a unicast manner and give
us the result from one specific instance), Wa_22013088509 suggests that
we leave the multicast bit enabled when performing read operations, so
we follow suit here.

Cc: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220314234203.799268-4-matthew.d.roper@intel.com

Additional workarounds are required once we start exposing CCS engines.

Note that we have a number of workarounds that update registers in the
shared render/compute reset domain.  Historically we've just added such
registers to the RCS engine's workaround list.  But going forward we
should be more careful to place such workarounds on a wa_list for an
engine that definitely exists and is not fused off (e.g., a platform
with no RCS would never apply the RCS wa_list).  We'll keep
rcs_engine_wa_init() focused on RCS-specific workarounds that only need
to be applied if the RCS engine is present.  A separate
general_render_compute_wa_init() function will be used to define
workarounds that touch registers in the shared render/compute reset
domain and that we need to apply regardless of what render and/or
compute engines actually exist.  Any workarounds defined in this new
function will internally be added to the first present RCS or CCS
engine's workaround list to ensure they get applied (and only get
applied once rather than being needlessly re-applied several times).

Co-author: Srinivasan Shanmugam
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-13-matthew.d.roper@intel.com

We have to specify in the Render Control Unit Mode register
when CCS is enabled.

v2:
 - Move RCU_MODE programming to a helper function.  (Tvrtko)
 - Clean up and clarify comments.  (Tvrtko)
 - Add RCU_MODE to the GuC save/restore list.  (Daniele)
v3:
 - Move this patch before the GuC ADS update to enable compute engines;
   the definition of RCU_MODE and its insertion into the save/restore
   list moves to this patch.  (Daniele)
v4:
 - Call xehp_enable_ccs_engines() directly in guc_resume() and
   execlists_resume() rather than adding an extra layer of wrapping to
   the engine->resume() vfunc.  (Umesh)

Bspec: 46034
Original-author: Michel Thierry
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NAravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NUmesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302001554.1836066-1-matthew.d.roper@intel.com

This is a more appropriate header for these definitions.

v2:
 - Cleanup whitespace. (Lucas)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-7-matthew.d.roper@intel.com

Add execlists and GuC interrupts for compute CS into existing IRQ handlers.

All compute command streamers belong to the same compute class, so the
only change needed to enable their interrupts is to program their GT engine
interrupt mask registers.

CCS0 shares the register with CCS1, while CCS2 and CCS3 are in a new one.

BSpec: 50844, 54029, 54030, 53223, 53224.
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NAravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-4-matthew.d.roper@intel.com

Introduce a Compute Command Streamer (CCS), which has access to
the media and GPGPU pipelines (but not the 3D pipeline).

To begin with, define the compute class/engine common functions, based
on the existing render ones.

v2:
 - Add kerneldoc for drm_i915_gem_engine_class since we're adding a new
   element to it.  (Daniel)
 - Make engine class <-> guc class converters use lookup tables to make
   it more clear/explicit how the IDs map.  (Tvrtko)

v3:
 - Don't update uapi for now; we'll just include the driver-internal
   changes for the time being.

Bspec: 46167, 45544
Original-author: Michel Thierry
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NAravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-2-matthew.d.roper@intel.com

BSPEC: 46123
v2: Address review feedback [MattR]
v3: move register definition to gt_regs [MattR]
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NClint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211052333.12306-1-clinton.a.taylor@intel.com

Registers that exist within the MCH BAR and are mirrored into the GPU's
MMIO space are a good candidate to separate out into their own header.

For reference, the mirror of the MCH BAR starts at the following
locations in the graphics MMIO space (the end of the MCHBAR range
differs slightly on each platform):

 * Pre-gen6:           0x10000
 * Gen6-Gen11 + RKL:  0x140000

v2:
 - Create separate patch to swtich a few register definitions to be
   relative to the MCHBAR mirror base.
 - Drop upper bound of MCHBAR mirror from commit message; there are too
   many different combinations between various platforms to list out,
   and the documentation is spotty for the older pre-gen6 platforms
   anyway.

Bspec: 134, 51771
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215061342.2055952-2-matthew.d.roper@intel.com

The random order of register definitions we have today causes a lot of
confusion and unintentional duplication when new registers/bits are
added to the driver.  Let's order the GT register file by MMIO offset

A couple duplicated/unused register definitions are dropped while doing
this re-order:  GEN11_GT_INTR_DW{0,1}, GEN11_IIR_REG{0,1}_SELECTOR, and
GEN11_INTR_IDENTITY_REG{0,1} aren't used anywhere in the driver because
we have other parameterized macros referencing those registers.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-7-matthew.d.roper@intel.com

Switch all register offsets to use lowercase hex values for consistency.
Also strip any unnecessary leading 0's.  For example, "_MMIO(0x0D08)"
becomes "_MMIO(0xd08)."
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-6-matthew.d.roper@intel.com

There's a lot of inconsistent spacing and indentation in our register
definitions.  Let's clean things up a bit and follow some consistent
rules:

 * "#define" always starts in column 0
 * There's exactly one space between '#define' and the name of a
   register.
 * There's exactly three spaces between '#define' and the name of a
   bit/bitfield.
 * Tabs (no spaces) are used between a definition name and its value;
   the value starts on column 48 unless the name is too long, in which
   case a single tab is used.

Final diff for this patch is empty if whitespace is ignored:

        $ git diff -w
        $
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-5-matthew.d.roper@intel.com

We have both a parameterized RING_MI_MODE() macro and an RCS-specific
MI_MODE; drop the latter and use the former everywhere.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-4-matthew.d.roper@intel.com

These SFC registers were defined in an unusual way, taking an engine as
a parameter rather than an engine MMIO base offset.  Let's adjust them
to match the style used by other per-engine registers and move them to
intel_engine_regs.h.

While doing this move, we can drop GEN12_HCP_SFC_FORCED_LOCK completely;
it was intended for use in an early version of a hardware workaround,
but was no longer necessary by the time the workaround was finalized.
It is not used anywhere in the driver.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-3-matthew.d.roper@intel.com

Due to some mistaken merge conflict resolution, we wound up with a copy
of VDBOX_CGCTL3F18 in both intel_engine_regs.h and intel_gt_regs.h.
Since this is a per-engine register, referenced relative to an engine's
base offset, drop the copy from intel_gt_regs.h
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-2-matthew.d.roper@intel.com

A couple hunks didn't get applied while resolving the conflicts on
commit 0d6419e9 ("drm/i915: Move GT registers to their own header
file").  Add the second half of the patch as a follow-up commit.

Fixes: 0d6419e9 ("drm/i915: Move GT registers to their own header file")
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com