When encapsulation field is set, mark it as used key for the flow
dissector. This will be used by offloading drivers.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

New encapsulation keys were added to the flower classifier, which allow
classification according to outer (encapsulation) headers attributes
such as key and IP addresses.
In order to expose those attributes outside flower, add
corresponding enums in the flow dissector.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Needed for drivers to pick the relevant action when offloading tunnel
key act.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without this check, it is not possible to create two rules that
are identical except for their UID ranges. For example:

root@net-test:/# ip rule add prio 1000 lookup 300
root@net-test:/# ip rule add prio 1000 uidrange 100-200 lookup 300
RTNETLINK answers: File exists
root@net-test:/# ip rule add prio 1000 uidrange 100-199 lookup 100
root@net-test:/# ip rule add prio 1000 uidrange 200-299 lookup 200
root@net-test:/# ip rule add prio 1000 uidrange 300-399 lookup 100
RTNETLINK answers: File exists

Tested: https://android-review.googlesource.com/#/c/299980/Signed-off-by: NLorenzo Colitti <lorenzo@google.com>
Acked-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver uses a union for copying data to & from management firmware
when interacting with it.
Problem is that the function always copies sizeof(union) while commit
2edbff8d ("qed: Learn resources from management firmware") is casting
a union elements which is of smaller size [24-byte instead of 88-bytes].

Also, the union contains some inappropriate elements which increase its
size [should have been 32-bytes]. While this shouldn't corrupt other
PF messages to the MFW [as management firmware enforces permissions so
that each PF is allowed to write only to its own mailbox] we fix this
here as well.

Fixes: 2edbff8d ("qed: Learn resources from management firmware")
Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When moving from typhoon_get_settings to typhoon_getlink_ksettings
in the commit f7a5537c ("net: 3com: typhoon: use new api
ethtool_{get|set}_link_ksettings"), we use a local variable supported
but we forgot to update the struct ethtool_link_ksettings with
this value.

We also initialize advertising to zero, because otherwise it may
be uninitialized if no case of the switch (tp->xcvr_select) is used.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Acked-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Acked-by: NJes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Joachim Eastwood says:

====================
stmmac: dwmac-rk: convert to standard PM/remove functions

This patch set aims to remove the init/exit callbacks from the
dwmac-rk driver and instead use standard PM callbacks. Eventually
the init/exit callbacks will be deprecated and removed from all
drivers dwmac-* except for dwmac-generic. Drivers will be refactored
to use standard PM and remove callbacks.

This conversion was pretty straight forward, but it would really nice
if some chromium people could test suspend/resume with this patch set.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of adding hooks inside stmmac_platform it is better to just use
the standard PM callbacks within the specific dwmac-driver. This only
used by the dwmac-rk driver.

This reverts commit cecbc556 ("stmmac: allow to split suspend/resume
from init/exit callbacks").
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the rk_gmac_init() only calls another function move this
function call into probe so rk_gmac_init() can be removed.

Since commit cecbc556 ("stmmac: allow to split suspend/resume
from init/exit callbacks") the init hook is no longer used in
dwmac-rk so this can be removed.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert the exit hook into a standard driver remove function as
the hook doesn't really buy us anything extra.

Eventually the exit hook will be deprecated in favor of the driver
remove function.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use standard PM resume/suspend callbacks instead of the hooks in
stmmac_platform. This gives the driver more control and flexibility
when implementing PM functionality. The hooks in stmmac_platform
also doesn't buy us anything extra.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: tcp_get_info() locking changes

This short series prepares tcp_get_info() for more detailed infos.

In order to not slow down fast path, our goal is to use the normal
socket spinlock instead of custom synchronization.

All we need to ensure is that tcp_get_info() is not called with
ehash lock, which might dead lock, since packet processing would acquire
the spinlocks in reverse way.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We had various problems in the past in tcp_get_info() and used
specific synchronization to avoid deadlocks.

We would like to add more instrumentation points for TCP, and
avoiding grabing socket lock in tcp_getinfo() was too costly.

Being able to lock the socket allows to provide consistent set
of fields.

inet_diag_dump_icsk() can make sure ehash locks are not
held any more when tcp_get_info() is called.

We can remove syncp added in commit d654976c
("tcp: fix a potential deadlock in tcp_get_info()"), but we need
to use lock_sock_fast() instead of spin_lock_bh() since TCP input
path can now be run from process context.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Being lockless in tcp_get_info() is hard, because we need to add
specific synchronization in TCP fast path, like seqcount.

Following patch will change inet_diag_dump_icsk() to no longer
hold any lock for non listeners, so that we can properly acquire
socket lock in get_tcp_info() and let it return more consistent counters.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Neil Armstrong says:

====================
ARM64: Add Internal PHY support for Meson GXL

The Amlogic Meson GXL SoCs have an internal RMII PHY that is muxed with the
external RGMII pins.

In order to support switching between the two PHYs links, extended registers
size for mdio-mux-mmioreg must be added.

The DT related patches submitted as RFC in [3] will be sent in a separate
patchset due to multiple patchsets and DTSI migrations.

Changes since v2 RFC patchset at : [3]
 - Change phy Kconfig/Makefile alphabetic order
 - GXL dtsi cleanup

Changes since original RFC patchset at : [2]
 - Remove meson8b experimental phy switching
 - Switch to mdio-mux-mmioreg with extennded size support
 - Add internal phy support for S905x and p231
 - Add external PHY support for p230

[1] http://lkml.kernel.org/r/1477932286-27482-1-git-send-email-narmstrong@baylibre.com
[2] http://lkml.kernel.org/r/1477060838-14164-1-git-send-email-narmstrong@baylibre.com
[3] http://lkml.kernel.org/r/1477932987-27871-1-git-send-email-narmstrong@baylibre.com
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add driver for the Internal RMII PHY found in the Amlogic Meson GXL SoCs.

This PHY seems to only implement some standard registers and need some
workarounds to provide autoneg values from vendor registers.

Some magic values are currently used to configure the PHY, and this a
temporary setup until clarification about these registers names and
registers fields are provided by Amlogic.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to support PHY switching on Amlogic GXL SoCs, add support for
16bit and 32bit registers sizes.
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sowmini Varadhan says:

====================
RDS: TCP: bug fixes

A couple of bug fixes identified during testing.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The for() loop in rds_tcp_accept_one() assumes that the 0'th
rds_tcp_conn_path is UP and starts multipath accepts at index 1.
But this assumption may not always be true: if the 0'th path
has failed (ERROR or DOWN state) an incoming connection request
should be used to resurrect this path.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The socket argument passed to rds_tcp_tc_info() is a PF_RDS socket,
so it is incorrect to report the address port info based on
rds_getname() as part of TCP state report.

Invoke inet_getname() for the t_sock associated with the
rds_tcp_connection instead.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do not set sk_err when dequeuing errors from the error queue.
Doing so results in:
a) Bugs: By overwriting existing sk_err values, it possibly
   hides legitimate errors. It is also incorrect when local
   errors are queued with ip_local_error. That happens in the
   context of a system call, which already returns the error
   code.
b) Inconsistent behavior: When there are pending errors on
   the error queue, sk_err is sometimes 0 (e.g., for
   the first timestamp on the error queue) and sometimes
   set to an error code (after dequeuing the first
   timestamp).
c) Suboptimality: Setting sk_err to ENOMSG on simple
   TX timestamps can abort parallel reads and writes.

Removing this line doesn't break userspace. This is because
userspace code cannot rely on sk_err for detecting whether
there is something on the error queue. Except for ICMP messages
received for UDP and RAW, sk_err is not set at enqueue time,
and as a result sk_err can be 0 while there are plenty of
errors on the error queue.

For ICMP packets in UDP and RAW, sk_err is set when they are
enqueued on the error queue, but that does not result in aborting
reads and writes. For such cases, sk_err is only readable via
getsockopt(SO_ERROR) which will reset the value of sk_err on
its own. More importantly, prior to this patch,
recvmsg(MSG_ERRQUEUE) has a race on setting sk_err (i.e.,
sk_err is set by sock_dequeue_err_skb without atomic ops or
locks) which can store 0 in sk_err even when we have ICMP
messages pending. Removing this line from sock_dequeue_err_skb
eliminates that race.
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jesper Dangaard Brouer says:

====================
qdisc and tx_queue_len cleanups for IFF_NO_QUEUE devices

This patchset is a cleanup for IFF_NO_QUEUE devices.  It will
hopefully help userspace get a more consistent behavior when attaching
qdisc to such virtual devices.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is a clear misconfiguration to attach a qdisc to a device with
tx_queue_len zero, because some qdisc's (namely, pfifo, bfifo, gred,
htb, plug and sfb) inherit/copy this value as their queue length.

Why should the kernel catch such a misconfiguration?  Because prior to
introducing the IFF_NO_QUEUE device flag, userspace found a loophole
in the qdisc config system that allowed them to achieve the equivalent
of IFF_NO_QUEUE, which is to remove the qdisc code path entirely from
a device.  The loophole on older kernels is setting tx_queue_len=0,
*prior* to device qdisc init (the config time is significant, simply
setting tx_queue_len=0 doesn't trigger the loophole).

This loophole is currently used by Docker[1] to get better performance
and scalability out of the veth device.  The Docker developers were
warned[1] that they needed to adjust the tx_queue_len if ever
attaching a qdisc.  The OpenShift project didn't remember this warning
and attached a qdisc, this were caught and fixed in[2].

[1] https://github.com/docker/libcontainer/pull/193
[2] https://github.com/openshift/origin/pull/11126

Instead of fixing every userspace program that used this loophole, and
forgot to reset the tx_queue_len, prior to attaching a qdisc.  Let's
catch the misconfiguration on the kernel side.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The flag IFF_NO_QUEUE marks virtual device drivers that doesn't need a
default qdisc attached, given they will be backed by physical device,
that already have a qdisc attached for pushback.

It is still supported to attach a qdisc to a IFF_NO_QUEUE device, as
this can be useful for difference policy reasons (e.g. bandwidth
limiting containers).  For this to work, the tx_queue_len need to have
a sane value, because some qdiscs inherit/copy the tx_queue_len
(namely, pfifo, bfifo, gred, htb, plug and sfb).

Commit a813104d ("IFF_NO_QUEUE: Fix for drivers not calling
ether_setup()") caught situations where some drivers didn't initialize
tx_queue_len.  The problem with the commit was choosing 1 as the
fallback value.

A qdisc queue length of 1 causes more harm than good, because it
creates hard to debug situations for userspace. It gives userspace a
false sense of a working config after attaching a qdisc.  As low
volume traffic (that doesn't activate the qdisc policy) works,
like ping, while traffic that e.g. needs shaping cannot reach the
configured policy levels, given the queue length is too small.

This patch change the value to DEFAULT_TX_QUEUE_LEN, given other
IFF_NO_QUEUE devices (that call ether_setup()) also use this value.

Fixes: a813104d ("IFF_NO_QUEUE: Fix for drivers not calling ether_setup()")
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The default TX queue length of Ethernet devices have been a magic
constant of 1000, ever since the initial git import.

Looking back in historical trees[1][2] the value used to be 100,
with the same comment "Ethernet wants good queues". The commit[3]
that changed this from 100 to 1000 didn't describe why, but from
conversations with Robert Olsson it seems that it was changed
when Ethernet devices went from 100Mbit/s to 1Gbit/s, because the
link speed increased x10 the queue size were also adjusted.  This
value later caused much heartache for the bufferbloat community.

This patch merely moves the value into a defined constant.

[1] https://git.kernel.org/cgit/linux/kernel/git/davem/netdev-vger-cvs.git/
[2] https://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/
[3] https://git.kernel.org/tglx/history/c/98921832c232Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
udp: do fwd memory scheduling on dequeue

After commit 850cbadd ("udp: use it's own memory accounting schema"),
the udp code needs to acquire twice the receive queue spinlock on dequeue.

This patch series remove the need for the second lock at skb free time,
moving the udp memory scheduling inside the dequeue operation; the skb
destructor field is not used anymore and an additional sk argument is added
to ip_cmsg_recv_offset() to cope with null skb->sk after dequeue.

Many thanks to Eric Dumazed for suggesting pretty all much the above.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A new argument is added to __skb_recv_datagram to provide
an explicit skb destructor, invoked under the receive queue
lock.
The UDP protocol uses such argument to perform memory
reclaiming on dequeue, so that the UDP protocol does not
set anymore skb->desctructor.
Instead explicit memory reclaiming is performed at close() time and
when skbs are removed from the receive queue.
The in kernel UDP protocol users now need to call a
skb_recv_udp() variant instead of skb_recv_datagram() to
properly perform memory accounting on dequeue.

Overall, this allows acquiring only once the receive queue
lock on dequeue.

Tested using pktgen with random src port, 64 bytes packet,
wire-speed on a 10G link as sender and udp_sink as the receiver,
using an l4 tuple rxhash to stress the contention, and one or more
udp_sink instances with reuseport.

nr sinks	vanilla		patched
1		440		560
3		2150		2300
6		3650		3800
9		4450		4600
12		6250		6450

v1 -> v2:
 - do rmem and allocated memory scheduling under the receive lock
 - do bulk scheduling in first_packet_length() and in udp_destruct_sock()
 - avoid the typdef for the dequeue callback
Suggested-by: NEric Dumazet <edumazet@google.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

So that we can use it even after orphaining the skbuff.
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Binding a raw socket to a local address fails if the socket is bound
to an L3 domain:

    $ vrf-test  -s -l 10.100.1.2 -R -I red
    error binding socket: 99: Cannot assign requested address

Update raw_bind to look consider if sk_bound_dev_if is bound to an L3
domain and use inet_addr_type_table to lookup the address.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jon Mason says:

====================
add NS2 support to bgmac

Changes in v6:
* Use a common bgmac_phy_connect_direct (per Rafal Milecki)
* Rebased on latest net-next
* Added Reviewed-by to the relevant patches

Changes in v5:
* Change a pr_err to netdev_err (per Scott Branden)
* Reword the lane swap binding documentation (per Andrew Lunn)

Changes in v4:
* Actually send out the lane swap binding doc patch (Per Scott Branden)
* Remove unused #define (Per Andrew Lunn)

Changes in v3:
* Clean-up the bgmac DT binding doc (per Rob Herring)
* Document the lane swap binding and make it generic (Per Andrew Lunn)

Changes in v2:
* Remove the PHY power-on (per Andrew Lunn)
* Misc PHY clean-ups regarding comments and #defines (per Andrew Lunn)
  This results on none of the original PHY code from Vikas being
  present.  So, I'm removing him as an author and giving him
  "Inspired-by" credit.
* Move PHY lane swapping to PHY driver (per Andrew Lunn and Florian
  Fainelli)
* Remove bgmac sleep (per Florian Fainelli)
* Re-add bgmac chip reset (per Florian Fainelli and Ray Jui)
* Rebased on latest net-next
* Added patch for bcm54xx_auxctl_read, which is used in the BCM54810
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the AMAC ethernet to the Broadcom Northstar2 SoC device
tree
Signed-off-by: NJon Mason <jon.mason@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the variant of amac hardware present in the Broadcom
Northstar2 based SoCs.  Northstar2 requires an additional register to be
configured with the port speed/duplexity (NICPM).  This can be added to
the link callback to hide it from the instances that do not use this.
Also, clearing of the pending interrupts on init is required due to
observed issues on some platforms.
Signed-off-by: NJon Mason <jon.mason@broadcom.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NRafał Miłecki <rafal@milecki.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the bgmac driver to allow for phy's defined by the device tree
Signed-off-by: NJon Mason <jon.mason@broadcom.com>
Acked-by: NRafał Miłecki <rafal@milecki.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clean-up the documentation to the bgmac-amac driver, per suggestion by
Rob Herring, and add details for NS2 support.
Signed-off-by: NJon Mason <jon.mason@broadcom.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The BCM54810 PHY requires some semi-unique configuration, which results
in some additional configuration in addition to the standard config.
Also, some users of the BCM54810 require the PHY lanes to be swapped.
Since there is no way to detect this, add a device tree query to see if
it is applicable.
Inspired-by: NVikas Soni <vsoni@broadcom.com>
Signed-off-by: NJon Mason <jon.mason@broadcom.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>