- 23 3月, 2021 1 次提交
-
-
由 Jani Nikula 提交于
Use the correct DSS CTL registers for ICL DSI transcoders. As a side effect, this also brings back the sanity check for trying to use pipe DSC registers on pipe A on ICL. Fixes: 8a029c11 ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave") References: http://lore.kernel.org/r/87eegxq2lq.fsf@intel.com Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: <stable@vger.kernel.org> # v5.11+ Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319115333.8330-1-jani.nikula@intel.com (cherry picked from commit 5706d028) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
- 10 12月, 2020 2 次提交
-
-
由 Jani Nikula 提交于
Move the initialization of the rc_model_size from the common code into encoder code, allowing different encoders to specify the size according to their needs. Keep using the hard coded value in the encoders for now to make this a non-functional change. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6843c4f6958619f7389180aa92fded7b9fdbb4ba.1607429866.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
The rc_model_size is specified in the DSC config, and the hardware programming should respect that instead of hard coding a value of 8192. Regardless, the rc_model_size in DSC config is currently hard coded to the same value, so this should have no impact, other than allowing the use of other sizes as needed. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: NVandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/27d86ad25832bbb985f6e996f3d02dca01a66895.1607429866.git.jani.nikula@intel.com
-
- 19 11月, 2020 1 次提交
-
-
由 Manasi Navare 提交于
Make vdsc work when no output is enabled. The big joiner needs VDSC on the slave, so enable it and set the appropriate bits. So remove encoder usage from dsc functions. Signed-off-by: NManasi Navare <manasi.d.navare@intel.com> Reviewed-by: NAnimesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-5-manasi.d.navare@intel.com
-
- 03 7月, 2020 1 次提交
-
-
由 Lucas De Marchi 提交于
We have a mix of dport, intel_dport, intel_dig_port and dig_port to reference a intel_digital_port struct. Numbers are around 5 intel_dport 36 dport 479 intel_dig_port 352 dig_port Since we already removed the intel_ prefix from most of our other structs, do the same here and prefer dig_port. v2: rename everything in i915, not just a few display sources and reword commit message (from Matt Roper) Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701045054.23357-1-lucas.demarchi@intel.com
-
- 20 5月, 2020 1 次提交
-
-
由 Matt Roper 提交于
RKL power wells are similar to TGL power wells, but have some important differences: * PG1 now has pipe A's VDSC (rather than sticking it in PG2) * PG2 no longer exists * DDI-C (aka TC-1) moves from PG1 -> PG3 * PG5 no longer exists due to the lack of a fourth pipe Also note that what we refer to as 'DDI-C' and 'DDI-D' need to actually be programmed as TC-1 and TC-2 even though this platform doesn't have TC outputs. Bspec: 49234 Cc: Imre Deak <imre.deak@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-9-matthew.d.roper@intel.com
-
- 27 2月, 2020 1 次提交
-
-
由 Jani Nikula 提交于
The #include has been splattered all over the place, but there are precious few places, all .c files, that actually need it. v2: remove leftover double newlines Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200225133131.3301-1-jani.nikula@intel.com
-
- 04 2月, 2020 2 次提交
-
-
由 Wambui Karuga 提交于
Converts uses of the printk based drm logging macros to the new struct drm_device based logging macros in i915/display/intel_vdsc.c. This was done using the following coccinelle script that transforms based on the existence of a struct drm_i915_private device: @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } Checkpatch warnings were fixed manually. Signed-off-by: NWambui Karuga <wambui.karugax@gmail.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200130083229.12889-5-wambui.karugax@gmail.com
-
由 Pankaj Bharadiya 提交于
drm specific WARN* calls include device information in the backtrace, so we know what device the warnings originate from. Covert all the calls of WARN* with device specific drm_WARN* variants in functions where drm_device or drm_i915_private struct pointer is readily available. The conversion was done automatically with below coccinelle semantic patch. checkpatch errors/warnings are fixed manually. @rule1@ identifier func, T; @@ func(...) { ... struct drm_device *T = ...; <... ( -WARN( +drm_WARN(T, ...) | -WARN_ON( +drm_WARN_ON(T, ...) | -WARN_ONCE( +drm_WARN_ONCE(T, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(T, ...) ) ...> } @rule2@ identifier func, T; @@ func(struct drm_device *T,...) { <... ( -WARN( +drm_WARN(T, ...) | -WARN_ON( +drm_WARN_ON(T, ...) | -WARN_ONCE( +drm_WARN_ONCE(T, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(T, ...) ) ...> } @rule3@ identifier func, T; @@ func(...) { ... struct drm_i915_private *T = ...; <+... ( -WARN( +drm_WARN(&T->drm, ...) | -WARN_ON( +drm_WARN_ON(&T->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&T->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&T->drm, ...) ) ...+> } @rule4@ identifier func, T; @@ func(struct drm_i915_private *T,...) { <+... ( -WARN( +drm_WARN(&T->drm, ...) | -WARN_ON( +drm_WARN_ON(&T->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&T->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&T->drm, ...) ) ...+> } Signed-off-by: NPankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200128181603.27767-20-pankaj.laxminarayan.bharadiya@intel.com
-
- 28 1月, 2020 1 次提交
-
-
由 Jani Nikula 提交于
The implicit "dev_priv" local variable use has been a long-standing pain point in the register access macros I915_READ(), I915_WRITE(), POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW(). Replace them with the corresponding new display engine register accessors intel_de_read(), intel_de_write(), intel_de_posting_read(), intel_de_read_fw(), and intel_de_write_fw(). No functional changes. Generated using the following semantic patch: @@ expression REG, OFFSET; @@ - I915_READ(REG) + intel_de_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - POSTING_READ(REG) + intel_de_posting_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE(REG, OFFSET) + intel_de_write(dev_priv, REG, OFFSET) @@ expression REG; @@ - I915_READ_FW(REG) + intel_de_read_fw(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE_FW(REG, OFFSET) + intel_de_write_fw(dev_priv, REG, OFFSET) Acked-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/735389bfa1f9c4be8080f3187ea1dbde308d1ce2.1579871655.git.jani.nikula@intel.com
-
- 14 1月, 2020 1 次提交
-
-
由 Ville Syrjälä 提交于
Lots of enc_to_foo(&encoder->base) around. Simplify by passing in the intel_encoder instead. @find@ identifier F =~ "^enc_to_.*"; identifier E; @@ F(struct drm_encoder *E) { ... } @@ identifier find.F; identifier find.E; @@ F( - struct drm_encoder *E + struct intel_encoder *encoder ) { <... - E + &encoder->base ...> } @@ identifier find.F; expression E; @@ - F(E) + F(to_intel_encoder(E)) @@ expression E; @@ - to_intel_encoder(&E->base) + E Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-4-ville.syrjala@linux.intel.comReviewed-by: NJuha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
-
- 19 12月, 2019 3 次提交
-
-
由 Jani Nikula 提交于
Fix several issues with DSC power domains that did not take DSI transcoders into account: - On TGL+ we need to use PW2 for DSC on pipe A, not transcoder A. There is no longer an eDP transcoder, but there are two DSI transcoders which may be connected to pipe A. - On TGL+ we need to use the pipe, not transcoder, power domains for DSC on pipes other than A. Again, there are DSI transcoders. - On ICL we need to use PW2 for DSC also for DSI transcoders, not just for the eDP transcoder. Using is_pipe_dsc() also adds the warning about ICL pipe A DSC, which does not exist. Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: NVandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191212134728.18432-1-jani.nikula@intel.com
-
由 Jani Nikula 提交于
The check for cpu_transcoder != TRANSCODER_A is more magic than necessary, and potentially misleading. Before TGL, DSC is supported on pipe A if, and only if, it's used with eDP or DSI transcoders. No functional changes. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: NVandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f00e9d55ce20b256177222588780c660aa587cc3.1576081155.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
ICL eDP and DSI transcoders have a DSC engine separate from the pipe. Abstract the register selection and fix it for ICL. Add a warning for pipe A DSC on ICL; it does not exist. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: NVandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/01bcddcdf397b1c8eb859ed18ebe023fb64383d9.1576081155.git.jani.nikula@intel.com
-
- 11 12月, 2019 5 次提交
-
-
由 Jani Nikula 提交于
Add basic hardware state readout for DSC, and check the most relevant details in the state checker. v2: - check for DSC power before reading its state - check if source supports DSC at all As a side effect, this should also get the power domains for the enabled DSC on takeover, and subsequently disable DSC if it's not needed. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3fb018cf9bd9a4c275aab389b6ec0f2a4e938bb9.1575974743.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Move intel_dp_source_supports_dsc() from intel_dp.c as intel_dsc_source_support() in intel_vdsc.c. The DSC source support is more about DSC than about DP, and will be needed for DP independent code. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6c9f646090913290fb00efd46a4332421bf95930.1575974743.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Add DSI specific computation and transmission to display of PPS. With hopes that this approach will work for both DP and DSI encoders. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NVandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/461db10b1f4d76625625a9f2b1e3d932fff42799.1575974743.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Turns out this isn't compatible with DSI, where we use the value from VBT. No functional changes. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NVandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3dd689688a51daff26088eaf6feac27f8b9f5ebc.1575974743.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Turns out future DSI specific parameters aren't workable with the approach of having the encoder specific functions in intel_vdsc.c. Make intel_dsc_compute_params() a helper that does the encoder independent parts, and have encoder code call it. Move intel_dsc_dp_compute_params() to intel_dp.c as intel_dp_dsc_compute_params(). No functional changes. v2: Rename pipe_config to crtc_state while at it. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NVandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/620688ec302f7f49cc539c6c1653bfaf6092fce0.1575974743.git.jani.nikula@intel.com
-
- 05 11月, 2019 4 次提交
-
-
由 Jani Nikula 提交于
Use intel_dsc_ prefix. No functional changes. Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104141439.26312-4-jani.nikula@intel.com
-
由 Jani Nikula 提交于
Split out the DP specific parts, making it easier to add DSI specific configuration. Also move the encoder specific parts towards the end, to allow overriding generic configuration if needed. This also improves clarity by making it clear the encoder independent configuration does not depend on the encoder specific parts. v2: Rebase Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104141439.26312-3-jani.nikula@intel.com
-
由 Jani Nikula 提交于
Use a simple pointer to the relevant element instead of duplicating the array subscription. No functional changes. Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104141439.26312-2-jani.nikula@intel.com
-
由 Jani Nikula 提交于
No need for them to be mutable. Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104141439.26312-1-jani.nikula@intel.com
-
- 01 11月, 2019 2 次提交
-
-
由 Maarten Lankhorst 提交于
Split up crtc_state->base to uapi. This is done using the following patch, ran after the previous commit that splits out any hw references: @@ struct intel_crtc_state *T; @@ -T->base +T->uapi Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-5-maarten.lankhorst@linux.intel.com
-
由 Maarten Lankhorst 提交于
Split up crtc_state->base to hw where appropriate. This is done using the following patch: @@ struct intel_crtc_state *T; identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$"; @@ -T->base.x +T->hw.x @@ struct drm_crtc_state *T; identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$"; @@ -to_intel_crtc_state(T)->base.x +to_intel_crtc_state(T)->hw.x Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-4-maarten.lankhorst@linux.intel.com
-
- 23 10月, 2019 2 次提交
-
-
由 Jani Nikula 提交于
DSC isn't DP specific, so remove the dp_ prefix from the crtc state member name. Also moving the member under the dsc sub-struct gives us enough context to allow shortening the name to just config. No functional changes. Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022133414.8293-2-jani.nikula@intel.com
-
由 Jani Nikula 提交于
Reduce verbosity in code by renaming dsc_params member of crtc state to simply dsc. There is enough context for this to be clear. No functional changes. Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022133414.8293-1-jani.nikula@intel.com
-
- 27 8月, 2019 1 次提交
-
-
由 Manasi Navare 提交于
This patch fixes the intel_configure_pps_for_dsc_encoder() function to use cpu_transcoder instead of encoder->type to select the correct DSC registers that was wrongly used in the original patch for one DSC register isntance. Fixes: 7182414e ("drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling") Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by: NManasi Navare <manasi.d.navare@intel.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821215950.24223-1-manasi.d.navare@intel.com (cherry picked from commit d4c61c4a) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
- 23 8月, 2019 1 次提交
-
-
由 Manasi Navare 提交于
This patch fixes the intel_configure_pps_for_dsc_encoder() function to use cpu_transcoder instead of encoder->type to select the correct DSC registers that was wrongly used in the original patch for one DSC register isntance. Fixes: 7182414e ("drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling") Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by: NManasi Navare <manasi.d.navare@intel.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821215950.24223-1-manasi.d.navare@intel.com
-
- 07 8月, 2019 1 次提交
-
-
由 Jani Nikula 提交于
Everything about the file is about display, and mostly about types related to display. Move under display/ as intel_display_types.h to reflect the facts. There's still plenty to clean up, but start off with moving the file where it logically belongs and naming according to contents. v2: fix the include guard name in the renamed file Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190806113933.11799-1-jani.nikula@intel.com
-
- 12 7月, 2019 1 次提交
-
-
由 José Roberto de Souza 提交于
On TGL the special EDP transcoder is gone and it should be handled by transcoder A. v2 (Lucas): - Reuse POWER_DOMAIN_TRANSCODER_EDP_VDSC (suggested by Ville) - Use crtc->dev since new_crtc_state->state may be NULL on atomic commit (suggested by Maarten) v3 (Lucas): - Rename power domain so it's clear it can also be used for transcoder A in TGL (requested by José and Manasi) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Acked-by: NJosé Roberto de Souza <jose.souza@intel.com> Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-8-lucas.demarchi@intel.com
-
- 17 6月, 2019 1 次提交
-
-
由 Jani Nikula 提交于
Add a new subdirectory for display code, and start off by moving modesetting output/encoder code. Judging by the include changes, this is a surprisingly clean operation. v2: - move intel_sdvo_regs.h too - use tabs for Makefile file lists and sort them Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-2-jani.nikula@intel.com
-
- 30 4月, 2019 1 次提交
-
-
由 Jani Nikula 提交于
It used to be handy that we only had a couple of headers, but over time intel_drv.h has become unwieldy. Extract declarations to a separate header file corresponding to the implementation module, clarifying the modularity of the driver. Ensure the new header is self-contained, and do so with minimal further includes, using forward declarations as needed. Include the new header only where needed, and sort the modified include directives while at it and as needed. No functional changes. Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/76d2719b462004ec6f6f5c302ee5d3876357c599.1556540890.git.jani.nikula@intel.com
-
- 06 3月, 2019 3 次提交
-
-
由 David Francis 提交于
The DP 1.4 spec defines the SDP header and SDP contents for a Picture Parameter Set (PPS) that must be sent in advance of DSC transmission to define the encoding characteristics. This was done in one struct, drm_dsc_pps_infoframe, which conatined the SDP header and PPS. Because the PPS is a property of DSC over any connector, not just DP, and because drm drivers may have their own SDP structs they wish to use, make the functions that initialise SDP and PPS headers take the components they operate on, not drm_dsc_pps_infoframe, Signed-off-by: NDavid Francis <David.Francis@amd.com> Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-4-David.Francis@amd.com
-
由 David Francis 提交于
Native 420 and 422 transfer modes are new in DSC1.2 In these modes, each two pixels of a slice are treated as one pixel, so the slice width is half as large (round down) for the purposes of calucating the groups per line and chunk size in bytes In native 422 mode, each pixel has four components, so the mux component of a group is larger by one additional mux word and one additional component Now that there is native 422 support, the configuration option previously called enable422 is renamed to simple_422 to avoid confusion Acked-by: NJani Nikula <jani.nikula@intel.com> Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NDavid Francis <David.Francis@amd.com> Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-3-David.Francis@amd.com
-
由 David Francis 提交于
The function intel_compute_rc_parameters is part of the dsc spec and is not driver-specific. Other drm drivers might like to use it. The function is not changed; just moved and renamed. Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NDavid Francis <David.Francis@amd.com> Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-2-David.Francis@amd.com
-
- 15 1月, 2019 1 次提交
-
-
由 Chris Wilson 提交于
The majority of runtime-pm operations are bounded and scoped within a function; these are easy to verify that the wakeref are handled correctly. We can employ the compiler to help us, and reduce the number of wakerefs tracked when debugging, by passing around cookies provided by the various rpm_get functions to their rpm_put counterpart. This makes the pairing explicit, and given the required wakeref cookie the compiler can verify that we pass an initialised value to the rpm_put (quite handy for double checking error paths). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-16-chris@chris-wilson.co.uk
-
- 09 1月, 2019 1 次提交
-
-
由 Jani Nikula 提交于
Needs just a few additional includes here and there. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190108082709.3748-1-jani.nikula@intel.com
-
- 30 11月, 2018 2 次提交
-
-
由 Manasi Navare 提交于
A separate power well 2 (PG2) is required for VDSC on eDP transcoder whereas all other transcoders use the power wells associated with the transcoders for VDSC. This patch adds a helper to obtain correct power domain depending on transcoder being used and enables/disables the power wells during VDSC enabling/disabling. v4: * Get VDSC power domain only if compression en is set in crtc_state (Ville, Imre) v3: * Call it intel_dsc_power_domain, add to intel_ddi_get_power_domains (Ville) v2: * Fix tabs, const crtc_state, fix comments (Ville) Suggested-by: NVille Syrjala <ville.syrjala@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NManasi Navare <manasi.d.navare@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-13-manasi.d.navare@intel.com
-
由 Manasi Navare 提交于
1. Disable Left/right VDSC branch in DSS Ctrl reg depending on the number of VDSC engines being used 2. Disable joiner in DSS Ctrl reg v4: * Remove encoder, make crtc_state const (Ville) v3 (From Manasi): * Add Disable PG2 for VDSC on eDP v2 (From Manasi): * Use old_crtc_state to find dsc params * Add a condition to disable only if dsc state compression is enabled * Use correct DSS CTL regs Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NGaurav K Singh <gaurav.k.singh@intel.com> Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-12-manasi.d.navare@intel.com
-