Make sure to complete requests on the submitting CPU.  Previously this
was done in blk_mq_end_io, but the responsibility shifted to the drivers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

The completion queue is implemented using lockless list.

The llist_add is adds the events to the list head which is a push operation.
The processing of the completion elements is done by disconnecting all the
pushed elements and iterating over the disconnected list. The problem is
that the processing is done in reverse order w.r.t order of the insertion
i.e. LIFO processing. By reversing the disconnected list which is done in
linear time the desired FIFO processing is achieved.
Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid} before
introducing r_target_{oloc,oid} needed for redirects.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

In preparation for tiering support, which would require having two
(base and target) object names for each osd request and also copying
those names around, introduce struct ceph_object_id (oid) and a couple
helpers to facilitate those copies and encapsulate the fact that object
name is not necessarily a NUL-terminated string.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

In preparation for adding oid abstraction, rename MAX_OBJ_NAME_SIZE to
CEPH_MAX_OID_NAME_LEN.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Instead of relying on pool fields in ceph_file_layout (for mapping) and
ceph_pg (for enconding), start using ceph_object_locator (oloc)
abstraction.  Note that userspace oloc currently consists of pool, key,
nspace and hash fields, while this one contains only a pool.  This is
OK, because at this point we only send (i.e. encode) olocs and never
have to receive (i.e. decode) them.

This makes keeping a copy of ceph_file_layout in every osd request
unnecessary, so ceph_osd_request::r_file_layout field is nuked.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

RAM block device support module name changed to brd.ko some years ago
with an "rd" alias to match previous module implementation.  This patch
updates its Kconfig definition.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

 If we load the null_blk module with bs=8k we get following oops:
[ 3819.812190] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 3819.812387] IP: [<ffffffff81170aa5>] create_empty_buffers+0x28/0xaf
[ 3819.812527] PGD 219244067 PUD 215a06067 PMD 0
[ 3819.812640] Oops: 0000 [#1] SMP
[ 3819.812772] Modules linked in: null_blk(+)

 Fix that by resetting block size to PAGE_SIZE if it is greater than PAGE_SIZE
Reported-by: NSumanth <sumantk2@linux.vnet.ibm.com>
Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Reviewed-by: NMatias Bjorling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If power is removed during a secure erase, the drive will end up in a
security locked condition.  This patch causes the driver to identify,
log, and flag the security lock state.  IOs are prevented from
submission to the drive until the locked state is addressed with a
secure erase.

Bumped version number to reflect this capability.
Signed-off-by: NSam Bradshaw <sbradshaw@micron.com>
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The mtip32xx driver makes a high order dma memory allocation to store a
command index table, some dedicated buffers, and a command header & SGL
blob.  This allocation can fail with a surprise insert under low &
fragmented memory conditions.

This patch breaks these regions up into separate low order allocations
and increases the maximum number of segments a single command SGL can
have.  We wanted to allow at least 256 segments for 1 MB direct IO.
Since the command header occupies the first 0x80 bytes of the SGL blob,
that meant we needed two 4k pages to contain the header and SGL.  The
two pages allow up to 504 SGL segments.
Signed-off-by: NSam Bradshaw <sbradshaw@micron.com>
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Discard requests are ignored if the encryption is enabled for the given
loop device.  Update comment to match the code, and similar comments
elsewhere in the file.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

pci_driver.probe should return a meaningful errno, not -1.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The test here can underflow so we pass bogus lengths to the hardware.
It's a static checker fix and I don't know the impact.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The driver core clears the driver data to NULL after device_release or on
probe failure.  Thus, it is not needed to manually clear the device driver
data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use module_pci_driver() macro which makes the code smaller and simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In case reading of block 0 during open() fails, it is not the right thing
to let open() succeed.

Fix this by introducing FD_OPEN_SHOULD_FAIL_BIT flag, and setting it in
case the bio callback encounters an error while trying to read block 0.

As a bonus, this works around certain broken userspace (blkid), which is
not able to properly handle read()s returning IO errors. Hence be nice to
those, and bail out during open() already; if block 0 is not readable,
read()s are not going to provide any meaningful data anyway.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When queue_mode is NULL_Q_MQ and null_blk is being removed,
blk_cleanup_queue() isn't called to cleanup queue, so the queue
allocated won't be freed.

This patch calls blk_cleanup_queue() for MQ to drain all pending
requests first and release the reference counter of queue kobject, then
blk_mq_free_queue() will be called in queue kobject's release handler
when queue kobject's reference counter drops to zero.
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The user has the option of disabling the platform driver:
00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01)

which is used to unplug the emulated drivers (IDE, Realtek 8169, etc)
and allow the PV drivers to take over. If the user wishes
to disable that they can set:

  xen_platform_pci=0
  (in the guest config file)

or
  xen_emul_unplug=never
  (on the Linux command line)

except it does not work properly. The PV drivers still try to
load and since the Xen platform driver is not run - and it
has not initialized the grant tables, most of the PV drivers
stumble upon:

input: Xen Virtual Keyboard as /devices/virtual/input/input5
input: Xen Virtual Pointer as /devices/virtual/input/input6M
------------[ cut here ]------------
kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206!
invalid opcode: 0000 [#1] SMP
Modules linked in: xen_kbdfront(+) xenfs xen_privcmd
CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1
Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013
RIP: 0010:[<ffffffff813ddc40>]  [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300
Call Trace:
 [<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240
 [<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70
 [<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront]
 [<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront]
 [<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130
 [<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50
 [<ffffffff8145e9a9>] driver_probe_device+0x89/0x230
 [<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0
 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230
 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230
 [<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0
 [<ffffffff8145e7d9>] driver_attach+0x19/0x20
 [<ffffffff8145e260>] bus_add_driver+0x1a0/0x220
 [<ffffffff8145f1ff>] driver_register+0x5f/0xf0
 [<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20
 [<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40
 [<ffffffffa0015000>] ? 0xffffffffa0014fff
 [<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront]
 [<ffffffff81002049>] do_one_initcall+0x49/0x170

.. snip..

which is hardly nice. This patch fixes this by having each
PV driver check for:
 - if running in PV, then it is fine to execute (as that is their
   native environment).
 - if running in HVM, check if user wanted 'xen_emul_unplug=never',
   in which case bail out and don't load any PV drivers.
 - if running in HVM, and if PCI device 5853:0001 (xen_platform_pci)
   does not exist, then bail out and not load PV drivers.
 - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks',
   then bail out for all PV devices _except_ the block one.
   Ditto for the network one ('nics').
 - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary'
   then load block PV driver, and also setup the legacy IDE paths.
   In (v3) make it actually load PV drivers.

Reported-by: Sander Eikelenboom <linux@eikelenboom.it
Reported-by: NAnthony PERARD <anthony.perard@citrix.com>
Reported-and-Tested-by: NFabio Fantoni <fabio.fantoni@m2r.biz>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Add extra logic to handle the myrid ways 'xen_emul_unplug'
can be used per Ian and Stefano suggestion]
[v3: Make the unnecessary case work properly]
[v4: s/disks/ide-disks/ spotted by Fabio]
Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> [for PCI parts]
CC: stable@vger.kernel.org

Set the return variable to an error code as done elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Tear down watch request if rbd_dev_device_setup() fails.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Rename rbd_dev_header_watch_sync() to __rbd_dev_header_watch_sync() and
introduce two helpers: rbd_dev_header_{,un}watch_sync() to make it more
clear what is going on.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

If single-major device number allocation scheme is turned on, instead
of reserving 256 minors per device, which imposes a limit of 4096
images mapped at once, reserve 16 minors per device and enable extended
devt feature.  This results in a theoretical limit of 65536 images
mapped at once, and still allows to have more than 15 partititions:
partitions starting with 16th are mapped under major 259 (Block
Extended Major):

$ rbd showmapped
id pool image snap device
0  rbd  b5    -    /dev/rbd0    # no partitions
1  rbd  b2    -    /dev/rbd1    # 40 partitions
2  rbd  b3    -    /dev/rbd2    #  2 partitions

$ cat /proc/partitions
 251        0       1024 rbd0
 251       16       1024 rbd1
 251       17          0 rbd1p1
 251       18          0 rbd1p2
 ...
 251       30          0 rbd1p14
 251       31          0 rbd1p15
 259        0          0 rbd1p16
 259        1          0 rbd1p17
 ...
 259       23          0 rbd1p39
 259       24          0 rbd1p40
 251       32       1024 rbd2
 251       33          0 rbd2p1
 251       34          0 rbd2p2

(major 251 was assigned dynamically at module load time)
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Currently each rbd device is allocated its own major number, which
leads to a hard limit of 230-250 images mapped at once.  This commit
adds support for a new single-major device number allocation scheme,
which is hidden behind a new single_major boolean module parameter and
is disabled by default for backwards compatibility reasons.  (Old
userspace cannot correctly unmap images mapped under single-major
scheme and would essentially just unmap a random image, if that.)

$ rbd showmapped
id pool image snap device
0  rbd  b100  -    /dev/rbd0
1  rbd  b101  -    /dev/rbd1
2  rbd  b102  -    /dev/rbd2
3  rbd  b103  -    /dev/rbd3

Old scheme (modprobe rbd):

$ ls -l /dev/rbd*
brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0
brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1
brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1
brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2
brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3
brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2
brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1
brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3

New scheme (modprobe rbd single_major=Y):

$ ls -l /dev/rbd*
brw-rw---- 1 root disk 253,   0 Dec 10 12:30 /dev/rbd0
brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1
brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1
brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2
brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3
brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2
brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1
brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3

(major 253 was assigned dynamically at module load time)

The new limit is 4096 images mapped at once, and it comes from the fact
that, as before, 256 minor numbers are reserved for each mapping.
(A follow-up commit changes the number of minors reserved and the way
we deal with partitions over that number.)

If single_major is set to true, two new sysfs interfaces show up:
/sys/bus/rbd/{add,remove}_single_major.  These are to be used instead
of /sys/bus/rbd/{add,remove}, which are disabled for backwards
compatibility reasons outlined above.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

In preparation for single-major device number allocation scheme, wire
up attribute_group::is_visible() callback for rbd bus.  This allows us
to make the new single-major attributes conditional.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Introduce /sys/bus/rbd/devices/<id>/minor sysfs attribute for exporting
rbd whole disk minor numbers.  This is a step towards single-major
device number allocation scheme, but also a good thing on its own.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Currently rbd ids are allocated using an atomic variable that keeps
track of the highest id currently in use and each new id is simply one
more than the value of that variable.  That's nice and cheap, but it
does mean that rbd ids are allowed to grow boundlessly, and, more
importantly, it's completely unpredictable.  So, in preparation for
single-major device number allocation scheme, which is going to
establish and rely on a constant mapping between rbd ids and device
numbers, switch to ida for rbd id assignments.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Refactor rbd_init() a bit to make it more clear what's going on.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Tweak "loaded" message, so that it looks like

[   30.184235] rbd: loaded

instead of

[   38.056564] rbd: loaded rbd (rados block device)

Also move (and slightly tweak) MODULE_DESCRIPTION so that all authors
are next to each other in modinfo output.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

rbd_device::dev_id is an int, format it as such.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

In the case of both the submit_queues param and use_per_node_hctx param
are used. We limit the number af submit_queues to the number of online
nodes.

If the submit_queues is a multiple of nr_online_nodes, its trivial. Simply map
them to the nodes. For example: 8 submit queues are mapped as node0[0,1],
node1[2,3], ...
If uneven, we are left with an uneven number of submit_queues that must be
mapped. These are mapped toward the first node and onward. E.g. 5
submit queues mapped onto 4 nodes are mapped as node0[0,1], node1[2], ...
Signed-off-by: NMatias Bjorling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The defaults for the module is to instantiate itself with blk-mq and a
submit queue for each CPU node in the system.

To save resources, initialize instead with a single submit queue.
Signed-off-by: NMatias Bjorling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Let the user know when the number of submission queues are being
ignored.
Signed-off-by: NMatias Bjorling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Simplify the initialization logic of the three block-layers.

- The queue initialization is split into two parts. This allows reuse of
  code when initializing the sq-, bio- and mq-based layers.
- Set submit_queues default value to 0 and always set it at init time.
- Simplify the init error code paths.
Signed-off-by: NMatias Bjorling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For NUMA systems, initializing the blk-mq layer and using per node hctx.
We initialize submit queues to 1, while blk-mq nr_hw_queues is
initialized to the number of NUMA nodes.

This makes the null_init_hctx function overwrite memory outside of what
it allocated.  In my case it lead to writing garbage into struct
request_queue's mq_map.
Signed-off-by: NMatias Bjorling <m@bjorling.me>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mark functions skd_skmsg_state_to_str() and skd_skreq_state_to_str() as
static in skd_main.c because they are not used outside this file.

This eliminates the following warnings in skd_main.c:
drivers/block/skd_main.c:5272:13: warning: no previous prototype for ‘skd_skmsg_state_to_str’ [-Wmissing-prototypes]
drivers/block/skd_main.c:5284:13: warning: no previous prototype for ‘skd_skreq_state_to_str’ [-Wmissing-prototypes]
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For NUMA systems, initializing the blk-mq layer and using per node hctx.
We initialize submit queues to 1, while blk-mq nr_hw_queues is
initialized to the number of NUMA nodes.

This makes the null_init_hctx function overwrite memory outside of what
it allocated.  In my case it lead to writing garbage into struct
request_queue's mq_map.
Signed-off-by: NMatias Bjorling <m@bjorling.me>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The drivers are long gone but some config escaped the prune
Signed-off-by: NAlan Cox <gnomes@lxorguk.ukuu.org.uk>
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=57221Signed-off-by: NJiri Kosina <jkosina@suse.cz>

In the blkif_release function the bdget_disk() call might returns
a NULL ptr which might be dereferenced on bdev->bd_openers checking
Signed-off-by: NFelipe Pena <felipensp@gmail.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Added WARN per Roger's suggestion]

pfn cannot actually be used unless (!info->feature_persistent), nor is
pfn accessed in get_grant() unless (!info->feature_persistent), but silence
this warning anyway. gcc-4.8

drivers/block/xen-blkfront.c: In function 'do_blkif_request':
drivers/block/xen-blkfront.c:508:20: warning: 'pfn' may be used uninitialized in this function [-Wmaybe-uninitialized]
     gnt_list_entry = get_grant(&gref_head, pfn, info);
                    ^
drivers/block/xen-blkfront.c:492:19: note: 'pfn' was declared here
     unsigned long pfn;

Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: NTim Gardner <tim.gardner@canonical.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NRoger Pau Monné <roger.pau@citrix.com>