Add the default mode for every output device when there
is no mode for it.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add a function that can be used to add the default mode for the output device
without EDID.
It will add the default mode that meets with the requirements of given
hdisplay/vdisplay limit.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When we need to add the standard timing mode, we will firstly check whether it
can be found in DMT table by comparing the hdisplay/vdisplay/vfresh_rate.
If it can't be found, then we will use the cvt/gtf to add the required mode.
If it can be found, it will be returned.

At the same time the function of drm_mode_vrefresh is also fixed. It will
return the result of actual refresh_rate plus 0.5.
For example:
When the calculated value is 84.9, then the fresh_rate is 85.
When the calculated value is 70.02, then the fresh_rate is 70.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When we add a standard timing mode in UMS, we will first check whether it can
be found in default mode table. If it can't be found, then we will use cvt/gtf
to add the standard timing mode.
Add the default mode table so that we can check whether the given mode
can be found in the default mode table as what we have done in UMS mode.

If the status of one output device is connected but there is no EDID, it will
have no correct mode. In such case we can add some default modes for it. Of
course we only add the modes in the default modes list that visible part is not
greater than 1024x768.

The default mode is autogenerated from the DMT spec. And it is copied from
xserver/hw/xfree86/modes/xf86EdidModes.c. But the mode with reduced blank
feature is removed.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

I really don't want to have core drm module rely on CONFIG_FB,
so this is the easiest answer.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixes up the DISCARD + 2 sided stencil in the new generator scripts.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This could be used to bypass CS checks.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NMaarten Maathuis <madman2003@gmail.com>
Signed-off-by: NDave Airlie <airlied@linux.ie>

We only want to NULL encoder->crtc when it is off.
Signed-off-by: NDave Airlie <airlied@redhat.com>

For shared tv-out and VGA encoders, we really need to know if
the encoder is just being switched off temporarily in blanking
or if we are really disabling it hard.

Also we need to try harder to disconnect encoders from unused
connectors so we can share more efficently.

(shared encoders stuff is coming in radeon tv-out support)
Signed-off-by: NDave Airlie <airlied@redhat.com>

This produces a warn on for architectures where this gets called
but we don't have a cache flushing implementation suitable.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds code to the drm_mm to talk to debugfs, and adds
support to radeon to add the VRAM and GTT mm lists to debugfs.

I tested with spinlock debugging and it doesn't give out.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Set accel to none, we really don't want anyone thinking
fb is an accel interface.
Pass pitch not depth to function for intel.
Signed-off-by: NDave Airlie <airlied@redhat.com>

airlied: fixup race against drm info by filling out
tmp before adding it to proc.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Sometimes we can obtain the EDID with multiple blocks from the display device.
For example: HDMI monitor.
When the CEA-EDID block is detected, we should also parse the detailed timing
info from it. Otherwise we will lose some modes for the display device.

The first step is check whether the CEA EDID block is found. If it exists,
it will skip the CEA-data block and parse the detailed timing info.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Initially I always meant this code to be shared, but things
ran away from me before I got to it.

This refactors the i915 and radeon kms fbdev interaction layers
out into generic helpers + driver specific pieces.

It moves all the panic/sysrq enhancements to the core file,
and stores a linked list of kernel fbs. This could possibly be
improved to only store the fb which has fbcon on it for panics
etc.

radeon retains some specific codes used for a big endian
workaround.

changes:
fix oops in v1
fix freeing path for crtc_info
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Almost all r128's private ioctls require that the CCE state has
already been initialised.  However, most do not test that this has
been done, and will proceed to dereference a null pointer.  This may
result in a security vulnerability, since some ioctls are
unprivileged.

This adds a macro for the common initialisation test and changes all
ioctl implementations that require prior initialisation to use that
macro.

Also, r128_do_init_cce() does not test that the CCE state has not
been initialised already.  Repeated initialisation may lead to a crash
or resource leak.  This adds that test.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Loosely based on a patch by
Jaswinder Singh Rajput <jaswinderlinux@gmail.com>.

KMS support by Dave Airlie <airlied@redhat.com>.

For Radeon 100- to 500-series, firmware blobs look like:
    struct {
        __be32 datah;
        __be32 datal;
    } cp_ucode[256];

For Radeon 600-series, there are two separate firmware blobs:
    __be32 me_ucode[PM4_UCODE_SIZE * 3];
    __be32 pfp_ucode[PFP_UCODE_SIZE];

For Radeon 700-series, likewise:
    __be32 me_ucode[R700_PM4_UCODE_SIZE];
    __be32 pfp_ucode[R700_PFP_UCODE_SIZE];
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

tmp allocation may fail, prevent a dereference.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- Previously the old encoder would be called during modeset and without a connector bad things happened.
Signed-off-by: NMaarten Maathuis <madman2003@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- The symbol was already exported.
Signed-off-by: NMaarten Maathuis <madman2003@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- The previous system was not very transparent, nor flexible.
- This is needed to be able to fix a few bugs in the mechanism.
Signed-off-by: NMaarten Maathuis <madman2003@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This cleans up the code in mkregtable.c to be more kernel style.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Several functions in the GEM kernel API used int as handle type, but
user API has it __u32 which is also the intended type.

Replace int with u32.
Signed-off-by: NPekka Paalanen <pq@iki.fi>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This ports rs690 to the safe reg tables and makes rs600 also
use the same table.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Firmware blob looks like this:
    __be32 datah
    __be32 datal
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Image format is IHEX, one record for each pipe in order (record
addresses are ignored).
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This merges the TTM and drm cache flushing into one file in the
drm core.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Previously we just made these offline and included them,
but no reason we can't generate them at build time.

TODO: add rs690 + r100/r200 when done.
should we do rs480/rs690 no tcl version?
Signed-off-by: NDave Airlie <airlied@redhat.com>

ttm:
Fix error paths when kobject_add returns an error.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

ttm:
Remove a stray debug printout.
Remove a re-init of the lru spinlock at device init.

radeon:
Fix the size of the bo_global allocation.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

linux-next conflict reported needed resolution.

Conflicts:
	drivers/gpu/drm/drm_crtc.c
	drivers/gpu/drm/drm_edid.c
	drivers/gpu/drm/i915/intel_sdvo.c
	drivers/gpu/drm/radeon/radeon_ttm.c
	drivers/gpu/drm/ttm/ttm_bo.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix oopses with doubly mounted snapshots
  nilfs2: missing a read lock for segment writer in nilfs_attach_checkpoint()

Fix some issues with the AFS documentation, found when testing AFS on ppc64:

- Update AFS features: reading/writing, local caching
- Typo in kafs sysfs debug file
- Use modprobe instead of insmod in example
- Update IPs for grand.central.org
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/kms: teardown crtc correctly when fb is destroyed.
  drm/kms/radeon: cleanup combios TV table like DDX.
  drm/radeon/kms: memset the allocated framebuffer before using it.
  drm/radeon/kms: although LVDS might be possible on crtc 1 don't do it.
  drm/radeon/kms: implement bo busy check + current domain
  drm/radeon/kms: cut down indirects in register accesses.
  drm/radeon/kms: Fix up vertical blank interrupt support.
  drm/radeon/kms: add rv530 R300_SU_REG_DEST + reloc for ZPASS_ADDR
  drm/edid: fixup detailed timings like the X server.
  drm/radeon/kms: Add specific rs690 authorized register table

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Update Microblaze defconfigs
  microblaze: Use klimit instead of _end for memory init
  microblaze: Enable ppoll syscall
  microblaze: Sane handling of missing timer/intc in device tree
  microblaze: use the generic ack_bad_irq implementation

Merge branch 'perfcounters-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Make 'make html' work
  perf annotate: Fix segmentation fault
  perf_counter: Fix the PARISC build
  perf_counter: Check task on counter read IPI
  perf: Rename perf-examples.txt to examples.txt
  perf record: Fix typo in pid_synthesize_comm_event

Common resources, like memory accounting and swap lists should be
global and not per device. Introduce a struct ttm_bo_global to
accomodate this, and register it with sysfs. Add a small sysfs interface
to return the number of active buffer objects.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@linux.ie>

Use inclusive zones to simplify accounting and its sysfs representation.
Use DMA32 accounting where applicable.

Add a sysfs interface to make the heuristically determined limits
readable and configurable.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@linux.ie>

The device directory will be the base directory of the
sysfs representation of other ttm subsystems.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@linux.ie>