The commit uses configcheck.sh from within configinit.sh, replacing the
imperfect inline expansion that was there before.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

This commit drops no-longer-needed diagnostics from the output.  Some of
them are retained in logfiles, in case they are ever needed.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

The TINY_RCU test cases were first put in place many years ago, and have
been incrementally modified rather than being reworked.  This commit
therefore completes a long-overdue reworking of the TINY_RCU test cases.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

The TREE_RCU test cases were first put in place many years ago, and have
been incrementally modified rather than being reworked.  This commit
therefore completes a long-overdue reworking of the TREE_RCU test cases.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

Use .boot facility to ease inclusion of SRCU into automated testing.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

The v3.12 version of the kernel added the CONFIG_NO_HZ_FULL_SYSIDLE
Kconfig parameter, so this commit adds a version transition at that
point.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

Some Kconfig fragments require rcutorture module parameters to
do optimal testing, for example, a configuration for SRCU would
need rcutorture.torture_type=srcu.  This commit therefore adds a
per-Kconfig-fragment boot-parameter capability.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

Different Kconfig parameters apply to different kernel versions, as
do different rcutorture module parameters.  This commit allows the
rcutorture test scripts to adjust for different kernel versions.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

Allow datestamp to be specified to allow tests to be broken up and run
in parallel.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

This commit adds the test framework that I used to test RCU under KVM.
This consists of a group of scripts and Kconfig fragments.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

idlestates in sysfs are counted from 0.

This fixes a wrong error message.
Current behavior on a machine with 4 sleep states is:

cpupower idle-set -e 4
Idlestate 4 enabled on CPU 0

-----Wrong---------------------
cpupower idle-set -e 5
Idlestate enabling not supported by kernel
-----Must and now will be -----
cpupower idle-set -e 5
Idlestate 6 not available on CPU 0
-------------------------------

cpupower idle-set -e 6
Idlestate 6 not available on CPU 0
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The cpupower idle-set subcommand was introduce recently.
This patch provides the missing manpage.

If cpupower is properly installed it will show up automatically
(similar to git), when invoking:
cpupower help idle-set
or
cpupower idle-set --help

Some parts have been taken over and adjusted from
git commit 62d6ae88
documentation submitted by Carsten Emde.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

By default, when tasks are specified (i.e. -p, -t or -u options)
per-thread mmaps are created.

Add an option to override that and force per-cpu mmaps.

Further comments by peterz:

So this option allows -t/-p/-u to create one buffer per cpu and attach
all the various thread/process/user tasks' their counters to that one
buffer?

As opposed to the current state where each such counter would have its
own buffer.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Tested-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383313899-15987-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

You can't pass demangled name into "perf probe", because of special chars:
./perf probe -f -x /tmp/a.out 'foo(int)'
Semantic error :There is non-digit char in line number.

And you can't even pass without demangling (because it search symbol in
DSO with demangle=true):
./perf probe -f -x /tmp/a.out _Z3fooi
no symbols found in /tmp/a.out, maybe install a debug package?

However:
nm /tmp/a.out | grep foo
000000000040056d T _Z3fooi

After this patch, using the next command:
./perf probe -f --no-demangle -x /tmp/a.out _Z3fooi

probe will be successfully added.
Signed-off-by: NAzat Khuzhin <a3at.mail@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382947464-31266-1-git-send-email-a3at.mail@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

$ perf record ls
$ perf report

Press 'down enter end'

Result:

Program received signal SIGSEGV, Segmentation fault.

The UI browser, used on a argv array would access past the end of the
array on SEEK_END because it wasn't using 'nr_entries - 1', fix it.

Reported-by: v.karpov@samsung.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=59291
Link: http://lkml.kernel.org/n/tip-3g83ipasqi219ktv764xzzjs@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It was affecting only frame-pointer (fp) based callchain processing.

Usage example:

  perf top --call-graph dwarf,1024 --max-stack 2

Works for any tool that does callchain resolving and provides a
--max-stack option.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/n/tip-eu45v8s3tq9ruay8tpfyon79@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Just one use so far, on the hists browser, for completeness since there
we use perf_evlist__{first,last} and perf_evsel__next() for handling the
TAB and UNTAB keys.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d09l4lejp5427enuf3igpckw@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In a few remaining places where the equivalent open coded variant was
still being used.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4vjnloi5fisilykwxalb5nel@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When introducing the PERF_RECORD_MMAP2 in:

5c5e854b perf tools: Add attr->mmap2 support

A check for the number of entries parsed by sscanf was introduced that
assumed all of the 8 fields needed to be correctly parsed so that
particular /proc/pid/maps line would be considered synthesizable.

That broke anon records synthesizing, as it doesn't have the 'execname'
field.

Fix it by keeping the sscanf return check, changing it to not require
that the 'execname' variable be parsed, so that the preexisting logic
can kick in and set it to '//anon'.

This should get things like JIT profiling working again.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Bill Gray <bgray@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/n/tip-bo4akalno7579shpz29u867j@git.kernel.org
[ commit log message is mine, dzickus reported the problem with a patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add missing newline if the 'uid' is invalid:

  hubble:~> perf top --stdio -u help
  Error:
  Invalid User: helphubble:~>

Fixed by this patch:

  comet:~/tip/tools/perf> perf top --stdio -u help
  Error:
  Invalid User: help
  comet:~/tip/tools/perf>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131112232609.GA31474@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Accidentally ran into these, get rid of them.
Signed-off-by: NDavidlohr Bueso <davidlohr@hp.com>
Link: http://lkml.kernel.org/r/1384323864.2527.8.camel@buesod1.americas.hpqcorp.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Tweak the summary output as suggested by Ingo Molnar:

  [penberg@localhost ~]$ perf trace -a --duration 10000 --summary -- sleep 1
  ^C
   Summary of events:

   Xorg (817), 148 events, 0.0%, 0.000 msec

     syscall            calls      min       avg       max      stddev
                                 (msec)    (msec)    (msec)        (%)
     --------------- -------- --------- --------- ---------     ------
     read                   7     0.002     0.004     0.011     32.00%
     rt_sigprocmask        40     0.001     0.001     0.002      1.31%
     ioctl                  6     0.002     0.003     0.005     19.45%
     writev                 7     0.004     0.018     0.059     43.76%
     select                 9     0.000    74.513   507.869     74.61%
     setitimer              4     0.001     0.002     0.002     10.08%
Suggested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NPekka Enberg <penberg@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/1384345308-24404-1-git-send-email-penberg@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Set feature-libunwind-debug-frame. We don't want it in
CORE_FEATURE_TESTS because it's not the generic case, but we
need to set it in the !feature-libunwind case.

Also, because x86 distributions typically don't have
dwarf_find_debug_frame() unwinding method:

  test-libunwind-debug-frame.c:(.text+0x31): undefined reference to `_Ux86_64_dwarf_find_debug_frame'

Restrict this new API to ARM for the time being.

With this patch test-all.c works again, so repeat perf builds
are  fast again:

  comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
  [...]

       0,452899660 seconds time elapsed                                          ( +-  0,11% )

While with before it was:

  comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
  [...]

       1,674001829 seconds time elapsed                                          ( +-  0,16% )

[ Includes fix to config/feature-checks/Makefile from Will Deacon. ]
Tested-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NJean Pihet <jean.pihet@linaro.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-scsoctqzmou3rpkixCHezy9e@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

'feature_timerfd' is checked all the time and calculated explicitly,
in a serial fashion. Add it to CORE_FEATURE_TESTS which causes it to
be built in parallel, using the newfangled parallel build autodetection
code.

This shaves 137 msecs off the perf build time on my system, which
speeds up the common case cached build by 43%:

Before:

  comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
  [...]
         0,453771441 seconds time elapsed                                          ( +-  0,09% )

After:

  comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
  [...]
         0,316290185 seconds time elapsed                                          ( +-  0,24% )

Cc: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-bb92CmexihopoSyqnkqepvsy@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Soft dirty bit allows us to track which pages are written since the last
clear_ref (by "echo 4 > /proc/pid/clear_refs".) This is useful for
userspace applications to know their memory footprints.

Note that the kernel exposes this flag via bit[55] of /proc/pid/pagemap,
and the semantics is not a default one (scheduled to be the default in the
near future.) However, it shifts to the new semantics at the first
clear_ref, and the users of soft dirty bit always do it before utilizing
the bit, so that's not a big deal.  Users must avoid relying on the bit in
page-types before the first clear_ref.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Support the next generation Intel Atom processor
mirco-architecture, formerly called Silvermont.

The server version, formerly called "Avoton",
is named the "Intel(R) Atom(TM) Processor C2000 Product Family".

The client version, formerly called "Bay Trail",
is named the "Intel Atom Processor Z3000 Series",
as well as various "Intel Pentium Processor"
and "Intel Celeron Processor" brands, depending
on form-factor.

Silvermont has a set of MSRs not far off from NHM,
but the RAPL register set is a sub-set of those previously supported.
Signed-off-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Jiri Olsa was writing a plugin for the cfg80211_tx_mlme_mgmt trace
event, and was not able to get the implemented function working.
The event's print fmt looks like:

   "netdev:%s(%d), ftype:0x%.2x", REC->name, REC->ifindex,
            __le16_to_cpup((__le16 *)__get_dynamic_array(frame))

As there's no helper function for __le16_to_cpup(), Jiri was creating one
with a plugin. But unfortunately, it would not work even though he set
up the plugin correctly.

The problem is that the function parameters do not handle the helper
function "__get_dynamic_array()", and that passes in a NULL pointer.

Adding PRINT_DYNAMIC_ARRAY direct support to eval_num_arg() allows the
use of __get_dynamic_array() in function parameters.
Reported-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Tested-by: NJiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131111160810.0ba9df7d@gandalf.local.homeSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Getting unwieldly long, for this app domain should be descriptive enough
and the use of __ to separate the class from the method names should
help with avoiding clashes with other code bases.
Reported-by: NDavid Ahern <dsahern@gmail.com>
Suggested-by: NIngo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Unhandled events cause an error that fails the test, fix it.
Reported-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/5281DFE5.3000909@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Logic will be re-used for the out-pages argument for mmap based writes
in perf-record.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1384267617-3446-4-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently perf requires the -m / --mmap_pages option to be a power of 2.

To be more user friendly perf should automatically round this up to the
next power of 2.

Currently:
  $ perf record -m 3 -a -- sleep 1
  --mmap_pages/-m value must be a power of two.sleep: Terminated

With patch:
  $ perf record -m 3 -a -- sleep 1
  rounding mmap pages size to 16384 (4 pages)
  ...

v2: Add bytes units to rounding message per Ingo's request. Other
    suggestions (e.g., prefixing INFO) should be addressed by wrapping
    pr_info to catch all instances.
Suggested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1384267617-3446-3-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adrian reported a segfault when using --no-out-pages:

$ tools/perf/perf record -vv --no-out-pages uname
Segmentation fault (core dumped)

The same occurs with --no-mmap-pages. Fix by checking that str is
non-NULL before parsing it.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Reported-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1384267617-3446-2-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Per request from Pekka make --summary a summary only option meaning do
not show the individual system calls. Add another option to see all
syscalls along with the summary. In addition use 's' and 'S' as
shortcuts for the options.
Requested-by: NPekka Enberg <penberg@kernel.org>
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NPekka Enberg <penberg@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1384273875-3751-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The output of 'perf trace --summary' tries to be too cute with
formatting and makes it very hard to read.  Simplify it in the spirit of
"strace -c":

[penberg@localhost libtrading]$ perf trace -a --duration 10000 --summary -- sleep 1
^C
 Summary of events:

 dbus-daemon (555), 10 events, 0.0%, 0.000 msec

                                                    msec/call
   syscall            calls      min      avg      max stddev
   --------------- -------- -------- -------- -------- ------
   sendmsg                2    0.002    0.005    0.008  55.00
   recvmsg                2    0.002    0.003    0.005  44.00
   epoll_wait             1    0.000    0.000    0.000   0.00

 NetworkManager (667), 56 events, 0.0%, 0.000 msec

                                                    msec/call
   syscall            calls      min      avg      max stddev
   --------------- -------- -------- -------- -------- ------
   poll                   2    0.000    0.002    0.003 100.00
   sendmsg               10    0.004    0.007    0.016  15.41
   recvmsg               16    0.002    0.003    0.005   8.24

 zfs-fuse (669), 4 events, 0.0%, 0.000 msec

                                                    msec/call
   syscall            calls      min      avg      max stddev
   --------------- -------- -------- -------- -------- ------
   futex                  2    0.000    0.001    0.002 100.00
Signed-off-by: NPekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/1384267334-18953-1-git-send-email-penberg@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Switch duration order to minimum, average, maximum for the '--summary'
command line option because it's more natural to read.
Signed-off-by: NPekka Enberg <penberg@kernel.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/1384265410-12344-1-git-send-email-penberg@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Doesn't work for me:

./perf test -v 19
19: Test software clock events have valid period values    :
--- start ---
mmap size 528384B
mmap size 528384B
All (0) samples have period value of 1!
---- end ----
Test software clock events have valid period values: FAILED!

Compensate the lower freq introduced in 67c1e4a5 with a longer loop,
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/5281D3B8.2030104@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When replaying a previous record session, it'll get a segfault since it
doesn't initialize raw_syscalls enter/exit tracepoint's evsel->priv for
caching the format fields.

So fix it by properly initializing sys_enter/exit evsels that comes from
reading the perf.data file header.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384237500-22991-2-git-send-email-namhyung@kernel.org
[ Split the syscall tp field caching part in the previous patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We need to set this in evsels coming out of a perf.data file header, not
just for new ones created for live sessions.

So separate the code that caches the syscall entry/exit tracepoint
format fields into a new function that will be used in the next
changeset.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112115700.GC4053@ghostprotocols.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The fifth argument of mmap syscall is fd and it often contains -1 as a
value for anon mappings.  Without this patch it doesn't show the file
name as well as it shows -1 as 4294967295.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384237500-22991-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>