Enable clockgating for VCN and JPEG blocks on aldebaran
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

s/proces/process/
Signed-off-by: NBhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

s/traing/training/

...Plus the entire sentence construction for better readability.
Signed-off-by: NBhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If userptr pages have been pinned but not bounded,
they remain uncleared.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDaniel Gomez <daniel@qtec.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If userptr pages have been pinned but not bounded,
they remain uncleared.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDaniel Gomez <daniel@qtec.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

GFX is in gfxoff mode during s0ix so we shouldn't need to
actually tear anything down and restore it.
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We handle it properly within the CG/PG functions directly
now.
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not needed as the device is in gfxoff state so the CG/PG state
is handled just like it would be for gfxoff during runtime gfxoff.

This should also prevent delays on resume.

Reworked from Pratik's original patch (Alex)
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NPratik Vishwakarma <Pratik.Vishwakarma@amd.com>

Provide and explanation as to why we skip GFX and PSP for
S0ix.  GFX goes into gfxoff, same as runtime, so no need
to tear down and re-init.  PSP is part of the always on
state, so no need to touch it.
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The SMU expects CGPG to be enabled when entering S0ix.
with this we can re-enable SMU suspend.
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This really needs to be done to properly tear down
the device.  SMC, PSP, and GFX are still problematic,
need to dig deeper into what aspect of them that is
problematic.
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No functional change.

v2: use correct dev
v3: rework
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move the non-DC specific code into the DCE IP blocks similar
to how we handle DC.  This cleans up the common suspend
and resume pathes.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Vram is system memory, so no need to evict.

v2: use PM_EVENT messages
v3: use correct dev
v4: use driver flags
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set flags at the top level pmops callbacks to track
state.  This cleans up the current set of flags and
properly handles S4 on S0ix capable systems.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

During system hibernation suspend still need un-gate gfx CG/PG firstly to handle HW
status check before HW resource destory.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There's no need to keep vgaswitcheroo around for HG
systems.  They don't use muxes and their power control
is handled via ACPI.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Once the device has runtime suspended, we don't need to power it
back up again for system suspend.  Likewise for resume, we don't
to power up the device again on resume only to power it back off
again via runtime pm because it's still idle.

v2: add DPM_FLAG_SMART_PREPARE as well
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> (v1)
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

as per:
https://www.kernel.org/doc/html/latest/driver-api/pm/devices.html

The prepare callback is required to support the DPM_FLAG_SMART_SUSPEND
driver flag.  This allows runtime pm to auto complete when the
system goes into suspend avoiding a wake up on suspend and on resume.
Apply this for hybrid gfx and BOCO systems where d3cold is
provided by the ACPI platform.

v2: check if device is runtime suspended in prepare.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add new DID.
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Added a new parameter and forgot to update the documentation.

Fixes: b6f91fc1 ("drm/amdgpu/display: buffer INTERRUPT_LOW_IRQ_CONTEXT interrupt work")
Reviewed-by: NXiaogang Chen <xiaogang.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Xiaogang Chen <xiaogang.chen@amd.com>

KIQ ring is being operated by kfd as well as amdgpu.
KFD is using kiq lock, we should the same from amdgpu side
as well.
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 33cf440d.
And it will enable mode-2 gpu reset for vangogh,
it asks PSP firmware version is 00.1A.00.0F or newer.
Signed-off-by: NXiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When recovery thread has begun GPU reset, there should be not other
threads to access hardware, otherwise system randomly hang.

v2 (chk): rewritten from scratch, use trylock and lockdep instead of
hand wiring the logic.

v3: add in_irq check

v4: change to check in_task
Signed-off-by: NDennis Li <Dennis.Li@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm-misc-next for 5.13:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
  - bridge: Fix Kconfig dependency
  - cmdline: Refuse zero width/height mode
  - ttm: Ignore signaled move fences, ioremap buffer according to mem
         caching settins

Driver Changes:
  - Conversions to sysfs_emit
  - tegra: Don't register DP AUX channels before connectors
  - zynqmp: Fix for an out-of-bound (but within struct padding) memset
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210409090020.jroa2d4p4qansrpa@gilmour

Fix the following coccicheck warning:
drivers/gpu/drm/panel//panel-tpo-td043mtea1.c:217:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/panel//panel-tpo-td043mtea1.c:189:8-16: WARNING:
use scnprintf or sprintf
Signed-off-by: NTian Tao <tiantao6@hisilicon.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1617069288-8317-1-git-send-email-tiantao6@hisilicon.com

Checkpatch was complaining about this - there's no need for us to print
errors when kzalloc() fails, as kzalloc() will already WARN for us. So,
let's fix that before converting things to make checkpatch happy.
Signed-off-by: NLyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: NRobert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-20-lyude@redhat.com

Since we're about to move drm_dp_helper.c over to drm_dbg_*(), we'll want
to make sure that we can also add ratelimited versions of these macros in
order to retain some of the previous debugging output behavior we had.

However, as I was preparing to do this I noticed that the current
rate limited macros we have are kind of bogus. It looks like when I wrote
these, I didn't notice that we'd always be calling __ratelimit() even if
the debugging message we'd be printing would normally be filtered out due
to the relevant DRM debugging category being disabled.

So, let's fix this by making sure to check drm_debug_enabled() in our
ratelimited macros before calling __ratelimit(), and start using
drm_dev_printk() in order to print debugging messages since that will save
us from doing a redundant drm_debug_enabled() check. And while we're at it,
let's move the code for this into another macro that we can reuse for
defining new ratelimited DRM debug macros more easily.

v2:
* Make sure to use tabs where possible in __DRM_DEFINE_DBG_RATELIMITED()
Signed-off-by: NLyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: NRobert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-8-lyude@redhat.com

As pointed out by the documentation for drm_dp_aux_register(),
drm_dp_aux_init() should be used in situations where the AUX channel for a
display driver can potentially be registered before it's respective DRM
driver. This is the case with Tegra, since the DP aux channel exists as a
platform device instead of being a grandchild of the DRM device.

Since we're about to add a backpointer to a DP AUX channel's respective DRM
device, let's fix this so that we don't potentially allow userspace to use
the AUX channel before we've associated it with it's DRM connector.
Signed-off-by: NLyude Paul <lyude@redhat.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-3-lyude@redhat.com

* Make sure that struct members are referred to using @, otherwise they
  won't be formatted as such
* Make sure to refer to other struct types using & so they link back to
  each struct's definition
* Make sure to precede constant values with % so they're formatted
  correctly
Signed-off-by: NLyude Paul <lyude@redhat.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-2-lyude@redhat.com

Just fix a warning.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Fixes: f2f12eb9 ("drm/scheduler: provide scheduler score externally")
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401125213.138855-1-christian.koenig@amd.com

spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NGuobin Huang <huangguobin4@huawei.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1617710114-48071-1-git-send-email-huangguobin4@huawei.com

struct drm_gem_object is declared twice. One is declared
at 40th line. The blew one is not needed. Remove the duplicate.
Signed-off-by: NWan Jiabing <wanjiabing@vivo.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401081704.1000863-1-wanjiabing@vivo.com

The dp->train_set[] for this driver is only two characters, not four so
this memsets too much.  Fortunately, this ends up corrupting a struct
hole and not anything important.

Fixes: d76271d2 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YGLwCBMotnrKZu6P@mwanda

fix 's/controller/controllers/'

in the sentence:
Most display controller handle display connectors...
Signed-off-by: NDafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326103216.7918-2-dafna.hirschfeld@collabora.com

If tbo.mem.bus.caching is cached, buffer is intended to be mapped
as cached from CPU. Map it with ioremap_cache.

This wasn't necessary before as device memory was never mapped
as cached from CPU side. It becomes necessary for aldebaran as
device memory is mapped cached from CPU.
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NChristian Konig <Christian.Koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1614638628-10508-1-git-send-email-Oak.Zeng@amd.comSigned-off-by: NChristian König <christian.koenig@amd.com>

Move fences that have already signaled should not prevent memory
allocations with no_wait_gpu.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210227034524.21763-1-Felix.Kuehling@amd.comSigned-off-by: NChristian König <christian.koenig@amd.com>

Allocate a new private stub fence in drm_syncobj_assign_null_handle,
instead of using a static stub fence.

When userspace creates a fence with DRM_SYNCOBJ_CREATE_SIGNALED or when
userspace signals a fence via DRM_IOCTL_SYNCOBJ_SIGNAL, the timestamp
obtained when the fence is exported and queried with SYNC_IOC_FILE_INFO
should match when the fence's status was changed from the perspective of
userspace, which is during the respective ioctl.

When a static stub fence started being used in by these ioctls, this
behavior changed. Instead, the timestamp returned by SYNC_IOC_FILE_INFO
became the first time anything used the static stub fence, which has no
meaning to userspace.
Signed-off-by: NDavid Stevens <stevensd@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408095428.3983055-1-stevensd@google.comReviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

If CONFIG_DRM_LONTIUM_LT8912B=m, the following errors will be seen while
compiling lontium-lt8912b.c

drivers/gpu/drm/bridge/lontium-lt8912b.c: In function
‘lt8912_hard_power_on’:
drivers/gpu/drm/bridge/lontium-lt8912b.c:252:2: error: implicit
declaration of function ‘gpiod_set_value_cansleep’; did you mean
‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration]
  gpiod_set_value_cansleep(lt->gp_reset, 0);
  ^~~~~~~~~~~~~~~~~~~~~~~~
  gpio_set_value_cansleep
drivers/gpu/drm/bridge/lontium-lt8912b.c: In function ‘lt8912_parse_dt’:
drivers/gpu/drm/bridge/lontium-lt8912b.c:628:13: error: implicit
declaration of function ‘devm_gpiod_get_optional’; did you mean
‘devm_gpio_request_one’? [-Werror=implicit-function-declaration]
  gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
             ^~~~~~~~~~~~~~~~~~~~~~~
             devm_gpio_request_one
drivers/gpu/drm/bridge/lontium-lt8912b.c:628:51: error: ‘GPIOD_OUT_HIGH’
undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’?
  gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
                                                   ^~~~~~~~~~~~~~
                                                   GPIOF_INIT_HIGH
Signed-off-by: NZhang Jianhua <zhangjianhua18@huawei.com>
Reviewed-by: NRobert Foss <robert.foss@linaro.org>
Signed-off-by: NRobert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408093822.207917-1-zhangjianhua18@huawei.com

Features:
- Add support for FBs requiring a power-of-two stride padding (Imre)

Refactoring:
- Disassociate display version from gen (Matt)
- Refactor legacy DP and HDMI code to separate files (Ville)
- Refactor FB plane code to a separate file (Imre)
- Refactor VBT child device info parsing and usage (Jani)
- Refactor KBL/TGL/ADL-S display and gt stepping schemes (Jani)

Fixes:
- DP Link-Training Tunable PHY Repeaters (LTTPR) fixes (Imre)
- HDCP fixes (Anshuman)
- DP 2.0 HDMI 2.1 PCON Fixed Rate Link (FRL) fixes (Ankit)
- Set HDA link parameters in driver (Kai)
- Fix enabled_planes bitmask (Ville)
- Fix transposed arguments to skl_plane_wm_level() (Ville)
- Stop adding planes to the commit needlessly (Ville)
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v996ml17.fsf@intel.com