If the victim in on the shrink list, don't remove it from there.
If shrink_dentry_list() manages to remove it from the list before
we are done - fine, we'll just free it as usual.  If not - mark
it with new flag (DCACHE_MAY_FREE) and leave it there.

Eventually, shrink_dentry_list() will get to it, remove the sucker
from shrink list and call dentry_kill(dentry, 0).  Which is where
we'll deal with freeing.

Since now dentry_kill(dentry, 0) may happen after or during
dentry_kill(dentry, 1), we need to recognize that (by seeing
DCACHE_DENTRY_KILLED already set), unlock everything
and either free the sucker (in case DCACHE_MAY_FREE has been
set) or leave it for ongoing dentry_kill(dentry, 1) to deal with.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Several spots in the kernel perform a sequence like:

	skb_queue_tail(&sk->s_receive_queue, skb);
	sk->sk_data_ready(sk, skb->len);

But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up.  So this skb->len access is potentially
to freed up memory.

Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.

And finally, no actual implementation of this callback actually uses
the length argument.  And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.

So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.

Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

'struct page' has two list_head fields: 'lru' and 'list'.  Conveniently,
they are unioned together.  This means that code can use them
interchangably, which gets horribly confusing like with this nugget from
slab.c:

>	list_del(&page->lru);
>	if (page->active == cachep->num)
>		list_add(&page->list, &n->slabs_full);

This patch makes the slab and slub code use page->lru universally instead
of mixing ->list and ->lru.

So, the new rule is: page->lru is what the you use if you want to keep
your page on a list.  Don't like the fact that it's not called ->list?
Too bad.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPekka Enberg <penberg@kernel.org>

On systems with CONFIG_COMPAT we introduced the new requirement that
audit_classify_compat_syscall() exists.  This wasn't true for everything
(apparently not for "tilegx", which I know less that nothing about.)

Instead of wrapping the preprocessor optomization with CONFIG_COMPAT we
should have used the new CONFIG_AUDIT_COMPAT_GENERIC.  This patch uses
that config option to make sure only arches which intend to implement
this have the requirement.

This works fine for tilegx according to Chris Metcalf
Signed-off-by: NEric Paris <eparis@redhat.com>

For commands returned with failed status, queue these for resubmission
and continue retrying them until success or for a limited amount of
time. The final timeout was arbitrarily chosen so requests can't be
retried indefinitely.

Since these are requeued on the nvmeq that submitted the command, the
callbacks have to take an nvmeq instead of an nvme_dev as a parameter
so that we can use the locked queue to append the iod to retry later.

The nvme_iod conviently can be used to track how long we've been trying
to successfully complete an iod request. The nvme_iod also provides the
nvme prp dma mappings, so I had to move a few things around so we can
keep those mappings.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
[fixed checkpatch issue with long line]
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>

Increase the default timeout to 30 seconds to match SCSI.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
[use byte instead of ushort]
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>

Registers with hot cpu notification to rebalance, and potentially allocate
additional, io queues.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>

The device's IO queues are associated with CPUs, so we can use a per-cpu
variable to map the a qid to a cpu. This provides a convienient way
to optimally assign queues to multiple cpus when the device supports
fewer queues than the host has cpus. The previous implementation may
have assigned these poorly in these situations. This patch addresses
this by sharing queues among cpus that are "close" together and should
have a lower lock contention penalty.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>

Martin reported that his test system would not boot with
current git, it oopsed with this:

BUG: unable to handle kernel paging request at ffff88046c6c9e80
IP: [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150
PGD 1ddf067 PUD 1de2067 PMD 47fc7d067 PTE 800000046c6c9060
Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
Modules linked in: sd_mod lpfc(+) scsi_transport_fc scsi_tgt oracleasm
rpcsec_gss_krb5 ipv6 igb dca i2c_algo_bit i2c_core hwmon
CPU: 3 PID: 87 Comm: kworker/u17:1 Not tainted 3.14.0+ #246
Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013
Workqueue: events_unbound async_run_entry_fn
task: ffff8802743c2150 ti: ffff880273d02000 task.ti: ffff880273d02000
RIP: 0010:[<ffffffff812971e0>]  [<ffffffff812971e0>]
blk_queue_start_tag+0x90/0x150
RSP: 0018:ffff880273d03a58  EFLAGS: 00010092
RAX: ffff88046c6c9e78 RBX: ffff880077208e78 RCX: 00000000fffc8da6
RDX: 00000000fffc186d RSI: 0000000000000009 RDI: 00000000fffc8d9d
RBP: ffff880273d03a88 R08: 0000000000000001 R09: ffff8800021c2410
R10: 0000000000000005 R11: 0000000000015b30 R12: ffff88046c5bb8a0
R13: ffff88046c5c0890 R14: 000000000000001e R15: 000000000000001e
FS:  0000000000000000(0000) GS:ffff880277b00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88046c6c9e80 CR3: 00000000018f6000 CR4: 00000000000407e0
Stack:
 ffff880273d03a98 ffff880474b18800 0000000000000000 ffff880474157000
 ffff88046c5c0890 ffff880077208e78 ffff880273d03ae8 ffffffff813b9e62
 ffff880200000010 ffff880474b18968 ffff880474b18848 ffff88046c5c0cd8
Call Trace:
 [<ffffffff813b9e62>] scsi_request_fn+0xf2/0x510
 [<ffffffff81293167>] __blk_run_queue+0x37/0x50
 [<ffffffff8129ac43>] blk_execute_rq_nowait+0xb3/0x130
 [<ffffffff8129ad24>] blk_execute_rq+0x64/0xf0
 [<ffffffff8108d2b0>] ? bit_waitqueue+0xd0/0xd0
 [<ffffffff813bba35>] scsi_execute+0xe5/0x180
 [<ffffffff813bbe4a>] scsi_execute_req_flags+0x9a/0x110
 [<ffffffffa01b1304>] sd_spinup_disk+0x94/0x460 [sd_mod]
 [<ffffffff81160000>] ? __unmap_hugepage_range+0x200/0x2f0
 [<ffffffffa01b2b9a>] sd_revalidate_disk+0xaa/0x3f0 [sd_mod]
 [<ffffffffa01b2fb8>] sd_probe_async+0xd8/0x200 [sd_mod]
 [<ffffffff8107703f>] async_run_entry_fn+0x3f/0x140
 [<ffffffff8106a1c5>] process_one_work+0x175/0x410
 [<ffffffff8106b373>] worker_thread+0x123/0x400
 [<ffffffff8106b250>] ? manage_workers+0x160/0x160
 [<ffffffff8107104e>] kthread+0xce/0xf0
 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff815f0bac>] ret_from_fork+0x7c/0xb0
 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70
Code: 48 0f ab 11 72 db 48 81 4b 40 00 00 10 00 89 83 08 01 00 00 48 89
df 49 8b 04 24 48 89 1c d0 e8 f7 a8 ff ff 49 8b 85 28 05 00 00 <48> 89
58 08 48 89 03 49 8d 85 28 05 00 00 48 89 43 08 49 89 9d
RIP  [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150
 RSP <ffff880273d03a58>
CR2: ffff88046c6c9e80

Martin bisected and found this to be the problem patch;

	commit 6d113398
	Author: Jan Kara <jack@suse.cz>
	Date:   Mon Feb 24 16:39:54 2014 +0100

	    block: Stop abusing rq->csd.list in blk-softirq

and the problem was immediately apparent. The patch states that
it is safe to reuse queuelist at completion time, since it is
no longer used. However, that is not true if a device is using
block enabled tagging. If that is the case, then the queuelist
is reused to keep track of busy tags. If a device also ended
up using softirq completions, we'd reuse ->queuelist for the
IPI handling while block tagging was still using it. Boom.

Fix this by adding a new ipi_list list head, and share the
memory used with the request hash table. The hash table is
never used after the request is moved to the dispatch list,
which happens long before any potential completion of the
request. Add a new request bit for this, so we don't have
cases that check rq->hash while it could potentially have
been reused for the IPI completion.
Reported-by: NMartin K. Petersen <martin.petersen@oracle.com>
Tested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

gcc <= 4.5.x has significant limitations with respect to initialization
of anonymous unions within structures. They need to be surrounded by
brackets, _and_ they need to be initialized in the same order in which
they appear in the structure declaration.

Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676
Link: http://lkml.kernel.org/r/1397077568-3156-1-git-send-email-mathieu.desnoyers@efficios.comSigned-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Similar to the fix in 40413dcb

MODULE_DEVICE_TABLE(x86cpu, ...) expects the struct to be called struct
x86cpu_device_id, and not struct x86_cpu_id which is what is used in the rest
of the kernel code.  Although gcc seems to ignore this error, clang fails
without this define to fix the name.

Code from drivers/thermal/x86_pkg_temp_thermal.c
static const struct x86_cpu_id __initconst pkg_temp_thermal_ids[] = { ... };
MODULE_DEVICE_TABLE(x86cpu, pkg_temp_thermal_ids);

Error from clang:
drivers/thermal/x86_pkg_temp_thermal.c:577:1: error: variable has
      incomplete type 'const struct x86cpu_device_id'
MODULE_DEVICE_TABLE(x86cpu, pkg_temp_thermal_ids);
^
include/linux/module.h:145:3: note: expanded from macro
      'MODULE_DEVICE_TABLE'
  MODULE_GENERIC_TABLE(type##_device, name)
  ^
include/linux/module.h:87:32: note: expanded from macro
      'MODULE_GENERIC_TABLE'
extern const struct gtype##_id __mod_##gtype##_table            \
                               ^
<scratch space>:143:1: note: expanded from here
__mod_x86cpu_device_table
^
drivers/thermal/x86_pkg_temp_thermal.c:577:1: note: forward declaration of
      'struct x86cpu_device_id'
include/linux/module.h:145:3: note: expanded from macro
      'MODULE_DEVICE_TABLE'
  MODULE_GENERIC_TABLE(type##_device, name)
  ^
include/linux/module.h:87:21: note: expanded from macro
      'MODULE_GENERIC_TABLE'
extern const struct gtype##_id __mod_##gtype##_table            \
                    ^
<scratch space>:141:1: note: expanded from here
x86cpu_device_id
^
1 error generated.
Signed-off-by: NBehan Webster <behanw@converseincode.com>
Signed-off-by: NJan-Simon Möller <dl9pf@gmx.de>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a compiler-clang.h file to add specific macros needed for compiling the
kernel with clang.

Initially the only override required is the macro for silencing the
compiler for a purposefully uninintialized variable.

Author: Mark Charlebois <charlebm@gmail.com>
Signed-off-by: NMark Charlebois <charlebm@gmail.com>
Signed-off-by: NBehan Webster <behanw@converseincode.com>

Fix the following sparse warnings:

  CHECK   kernel/tracepoint.c
kernel/tracepoint.c:184:18: warning: incorrect type in assignment (different address spaces)
kernel/tracepoint.c:184:18:    expected struct tracepoint_func *tp_funcs
kernel/tracepoint.c:184:18:    got struct tracepoint_func [noderef] <asn:4>*funcs
kernel/tracepoint.c:216:18: warning: incorrect type in assignment (different address spaces)
kernel/tracepoint.c:216:18:    expected struct tracepoint_func *tp_funcs
kernel/tracepoint.c:216:18:    got struct tracepoint_func [noderef] <asn:4>*funcs
kernel/tracepoint.c:392:24: error: return expression in void function
  CC      kernel/tracepoint.o
kernel/tracepoint.c: In function tracepoint_module_going:
kernel/tracepoint.c:491:6: warning: symbol 'syscall_regfunc' was not declared. Should it be static?
kernel/tracepoint.c:508:6: warning: symbol 'syscall_unregfunc' was not declared. Should it be static?

Link: http://lkml.kernel.org/r/1397049883-28692-1-git-send-email-mathieu.desnoyers@efficios.comSigned-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Commit 4550dd6c introduced for_each_bvec() which iterates over each
bvec attached to a bio or bip. However, the macro fails to check bi_size
before dereferencing which can lead to crashes while counting/mapping
integrity scatterlist segments.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: NJens Axboe <axboe@fb.com>

Instead of copying the num_tracepoints and tracepoints_ptrs from
the module structure to the tp_mod structure, which only uses it to
find the module associated to tracepoints of modules that are coming
and going, simply copy the pointer to the module struct to the tracepoint
tp_module structure.

Also removed un-needed brackets around an if statement.

Link: http://lkml.kernel.org/r/20140408201705.4dad2c4a@gandalf.local.homeAcked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Register/unregister tracepoint probes with struct tracepoint pointer
rather than tracepoint name.

This change, which vastly simplifies tracepoint.c, has been proposed by
Steven Rostedt. It also removes 8.8kB (mostly of text) to the vmlinux
size.

From this point on, the tracers need to pass a struct tracepoint pointer
to probe register/unregister. A probe can now only be connected to a
tracepoint that exists. Moreover, tracers are responsible for
unregistering the probe before the module containing its associated
tracepoint is unloaded.

   text    data     bss     dec     hex filename
10443444        4282528 10391552        25117524        17f4354 vmlinux.orig
10434930        4282848 10391552        25109330        17f2352 vmlinux

Link: http://lkml.kernel.org/r/1396992381-23785-2-git-send-email-mathieu.desnoyers@efficios.com

CC: Ingo Molnar <mingo@kernel.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Frank Ch. Eigler <fche@redhat.com>
CC: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
[ SDR - fixed return val in void func in tracepoint_module_going() ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When the system has only one CPU, lglock is effectively a spinlock; map
it directly to spinlock to eliminate the indirection and duplicate code.

In addition to removing overhead, this drops 1.6k of code with a
defconfig modified to have !CONFIG_SMP, and 1.1k with a minimal config.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We define a check function in order to avoid trouble with the include
files.  Then the higher level __this_cpu macros are modified to invoke
the preemption check.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NChristoph Lameter <cl@linux.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Tested-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vm counters are allowed to be racy.  Use raw_cpu_ops to avoid the
local_irq_disable overhead and to avoid preemption checks which will be
added to the __this_cpu operations.

[akpm@linux-foundation.org: Add comment.  Again.]
Signed-off-by: NChristoph Lameter <cl@linux.com>
Reported-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Dave Chinner <dchinner@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With the preempt checking logic for __this_cpu_ops we will get false
positives from locations in the code that use numa_node_id.

Before the __this_cpu ops where introduced there were no checks for
preemption present either.  smp_raw_processor_id() was used.  See

  http://www.spinics.net/lists/linux-numa/msg00641.html

Therefore we need to use raw_cpu_read here to avoid false postives.

Note that this issue has been discussed in prior years.  If the process
changes nodes after retrieving the current numa node then that is
acceptable since most uses of numa_node etc are for optimization and not
for correctness.

There were suggestions to implement a raw_numa_node_id in order to do
preempt checks for numa_node_id as well.  But I think we better defer
that to another patch since that would mean investigating how
numa_node_id() is used throughout the kernel which would increase the
scope of this patchset significantly.  After all preemption was never
checked before when numa_node_id() was used.

Some sample traces:

__this_cpu_read operation in preemptible [00000000] code: login/1456
caller is __this_cpu_preempt_check+0x2b/0x2d
CPU: 0 PID: 1456 Comm: login Not tainted 3.12.0-rc4-cl-00062-g2fe80d3b-dirty #185
Call Trace:
  dump_stack+0x4e/0x82
  check_preemption_disabled+0xc5/0xe0
  __this_cpu_preempt_check+0x2b/0x2d
  get_task_policy+0x1d/0x49
  get_vma_policy+0x14/0x76
  alloc_pages_vma+0x35/0xff
  handle_mm_fault+0x290/0x73b
  __do_page_fault+0x3fe/0x44d
  do_page_fault+0x9/0xc
  page_fault+0x22/0x30
  generic_file_aio_read+0x38e/0x624
  do_sync_read+0x54/0x73
  vfs_read+0x9d/0x12a
  SyS_read+0x47/0x7e
  cstar_dispatch+0x7/0x23

caller is __this_cpu_preempt_check+0x2b/0x2d
CPU: 0 PID: 1456 Comm: login Not tainted 3.12.0-rc4-cl-00062-g2fe80d3b-dirty #185
Call Trace:
  dump_stack+0x4e/0x82
  check_preemption_disabled+0xc5/0xe0
  __this_cpu_preempt_check+0x2b/0x2d
  alloc_pages_current+0x8f/0xbc
  __page_cache_alloc+0xb/0xd
  __do_page_cache_readahead+0xf4/0x219
  ra_submit+0x1c/0x20
  ondemand_readahead+0x28c/0x2b4
  page_cache_sync_readahead+0x38/0x3a
  generic_file_aio_read+0x261/0x624
  do_sync_read+0x54/0x73
  vfs_read+0x9d/0x12a
  SyS_read+0x47/0x7e
  cstar_dispatch+0x7/0x23
Signed-off-by: NChristoph Lameter <cl@linux.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Alex Shi <alex.shi@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel has never been audited to ensure that this_cpu operations are
consistently used throughout the kernel.  The code generated in many
places can be improved through the use of this_cpu operations (which
uses a segment register for relocation of per cpu offsets instead of
performing address calculations).

The patch set also addresses various consistency issues in general with
the per cpu macros.

A. The semantics of __this_cpu_ptr() differs from this_cpu_ptr only
   because checks are skipped. This is typically shown through a raw_
   prefix. So this patch set changes the places where __this_cpu_ptr()
   is used to raw_cpu_ptr().

B. There has been the long term wish by some that __this_cpu operations
   would check for preemption. However, there are cases where preemption
   checks need to be skipped. This patch set adds raw_cpu operations that
   do not check for preemption and then adds preemption checks to the
   __this_cpu operations.

C. The use of __get_cpu_var is always a reference to a percpu variable
   that can also be handled via a this_cpu operation. This patch set
   replaces all uses of __get_cpu_var with this_cpu operations.

D. We can then use this_cpu RMW operations in various places replacing
   sequences of instructions by a single one.

E. The use of this_cpu operations throughout will allow other arches than
   x86 to implement optimized references and RMV operations to work with
   per cpu local data.

F. The use of this_cpu operations opens up the possibility to
   further optimize code that relies on synchronization through
   per cpu data.

The patch set works in a couple of stages:

I. Patch 1 adds the additional raw_cpu operations and raw_cpu_ptr().
    Also converts the existing __this_cpu_xx_# primitive in the x86
    code to raw_cpu_xx_#.

II. Patch 2-4 use the raw_cpu operations in places that would give
     us false positives once they are enabled.

III. Patch 5 adds preemption checks to __this_cpu operations to allow
    checking if preemption is properly disabled when these functions
    are used.

IV. Patches 6-20 are patches that simply replace uses of __get_cpu_var
   with this_cpu_ptr. They do not depend on any changes to the percpu
   code. No preemption tests are skipped if they are applied.

V. Patches 21-46 are conversion patches that use this_cpu operations
   in various kernel subsystems/drivers or arch code.

VI.  Patches 47/48 (not included in this series) remove no longer used
    functions (__this_cpu_ptr and __get_cpu_var).  These should only be
    applied after all the conversion patches have made it and after we
    have done additional passes through the kernel to ensure that none of
    the uses of these functions remain.

This patch (of 46):

The patches following this one will add preemption checks to __this_cpu
ops so we need to have an alternative way to use this_cpu operations
without preemption checks.

raw_cpu_ops will be the basis for all other ops since these will be the
operations that do not implement any checks.

Primitive operations are renamed by this patch from __this_cpu_xxx to
raw_cpu_xxxx.

Also change the uses of the x86 percpu primitives in preempt.h.
These depend directly on asm/percpu.h (header #include nesting issue).
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NChristoph Lameter <cl@linux.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Alex Shi <alex.shi@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: David Daney <david.daney@cavium.com>
Cc: David Miller <davem@davemloft.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Hedi Berriche <hedi@sgi.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Mike Travis <travis@sgi.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Robert Richter <rric@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, we try to arrange sysfs entries for memcg caches in the same
manner as for global caches.  Apart from turning /sys/kernel/slab into a
mess when there are a lot of kmem-active memcgs created, it actually
does not work properly - we won't create more than one link to a memcg
cache in case its parent is merged with another cache.  For instance, if
A is a root cache merged with another root cache B, we will have the
following sysfs setup:

  X
  A -> X
  B -> X

where X is some unique id (see create_unique_id()).  Now if memcgs M and
N start to allocate from cache A (or B, which is the same), we will get:

  X
  X:M
  X:N
  A -> X
  B -> X
  A:M -> X:M
  A:N -> X:N

Since B is an alias for A, we won't get entries B:M and B:N, which is
confusing.

It is more logical to have entries for memcg caches under the
corresponding root cache's sysfs directory.  This would allow us to keep
sysfs layout clean, and avoid such inconsistencies like one described
above.

This patch does the trick.  It creates a "cgroup" kset in each root
cache kobject to keep its children caches there.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Glauber Costa <glommer@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently we destroy children caches at the very beginning of
kmem_cache_destroy().  This is wrong, because the root cache will not
necessarily be destroyed in the end - if it has aliases (refcount > 0),
kmem_cache_destroy() will simply decrement its refcount and return.  In
this case, at best we will get a bunch of warnings in dmesg, like this
one:

  kmem_cache_destroy kmalloc-32:0: Slab cache still has objects
  CPU: 1 PID: 7139 Comm: modprobe Tainted: G    B   W    3.13.0+ #117
  Call Trace:
    dump_stack+0x49/0x5b
    kmem_cache_destroy+0xdf/0xf0
    kmem_cache_destroy_memcg_children+0x97/0xc0
    kmem_cache_destroy+0xf/0xf0
    xfs_mru_cache_uninit+0x21/0x30 [xfs]
    exit_xfs_fs+0x2e/0xc44 [xfs]
    SyS_delete_module+0x198/0x1f0
    system_call_fastpath+0x16/0x1b

At worst - if kmem_cache_destroy() will race with an allocation from a
memcg cache - the kernel will panic.

This patch fixes this by moving children caches destruction after the
check if the cache has aliases.  Plus, it forbids destroying a root
cache if it still has children caches, because each children cache keeps
a reference to its parent.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Glauber Costa <glommer@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memcg-awareness turned kmem_cache_create() into a dirty interweaving of
memcg-only and except-for-memcg calls.  To clean this up, let's move the
code responsible for memcg cache creation to a separate function.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Glauber Costa <glommer@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch cleans up the memcg cache creation path as follows:

- Move memcg cache name creation to a separate function to be called
  from kmem_cache_create_memcg().  This allows us to get rid of the mutex
  protecting the temporary buffer used for the name formatting, because
  the whole cache creation path is protected by the slab_mutex.

- Get rid of memcg_create_kmem_cache().  This function serves as a proxy
  to kmem_cache_create_memcg().  After separating the cache name creation
  path, it would be reduced to a function call, so let's inline it.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Glauber Costa <glommer@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the renamed symbol is defined lib/iomap.c implements ioport_map and
ioport_unmap and currently (nearly) all platforms define the port
accessor functions outb/inb and friend unconditionally.  So
HAS_IOPORT_MAP is the better name for this.

Consequently NO_IOPORT is renamed to NO_IOPORT_MAP.

The motivation for this change is to reintroduce a symbol HAS_IOPORT
that signals if outb/int et al are available.  I will address that at
least one merge window later though to keep surprises to a minimum and
catch new introductions of (HAS|NO)_IOPORT.

The changes in this commit were done using:

	$ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/'
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes an artificial RapidIO bus root device and establishes
actual device hierarchy by providing reference to real parent devices.
It also introduces device class for RapidIO controller devices (on-chip
or an eternal bridge, known as "mport").

Existing implementation was sufficient for SoC-based platforms that have
a single RapidIO controller.  With introduction of devices using
multiple RapidIO controllers and PCIe-to-RapidIO bridges the old scheme
is very limiting or does not work at all.  The implemented changes allow
to properly reference platform's local RapidIO mport devices and provide
device details needed for upper layers.

This change to RapidIO device hierarchy does not break any known
existing kernel or user space interfaces.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
Cc: Jerry Jacobs <jerry.jacobs@prodrive-technologies.com>
Cc: Arno Tiemersma <arno.tiemersma@prodrive-technologies.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove no longer used deprecated code, and make local functions
static.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Acked-by: NJean Delvare <jdelvare@suse.de>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: George Spelvin <linux@horizon.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Eliminate the following warning in proc/vmcore.c:

  fs/proc/vmcore.c:1088:6: warning: no previous prototype for `vmcore_cleanup' [-Wmissing-prototypes]

[akpm@linux-foundation.org: clean up powerpc, remove unneeded EXPORT_SYMBOL]
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

get_task_state() uses the most significant bit to report the state to
user-space, this means that EXIT_ZOMBIE->EXIT_TRACE->EXIT_DEAD transition
can be noticed via /proc as Z -> X -> Z change.  Note that this was
possible even before EXIT_TRACE was introduced.

This is not really bad but imho it make sense to hide EXIT_TRACE from
user-space completely.  So the patch simply swaps EXIT_ZOMBIE and
EXIT_DEAD, this way EXIT_TRACE will be seen as EXIT_ZOMBIE by user-space.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Michal Schmidt <mschmidt@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Lennart Poettering <lpoetter@redhat.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

wait_task_zombie() first does EXIT_ZOMBIE->EXIT_DEAD transition and
drops tasklist_lock.  If this task is not the natural child and it is
traced, we change its state back to EXIT_ZOMBIE for ->real_parent.

The last transition is racy, this is even documented in 50b8d257
"ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE
race".  wait_consider_task() tries to detect this transition and clear
->notask_error but we can't rely on ptrace_reparented(), debugger can
exit and do ptrace_unlink() before its sub-thread sets EXIT_ZOMBIE.

And there is another problem which were missed before: this transition
can also race with reparent_leader() which doesn't reset >exit_signal if
EXIT_DEAD, assuming that this task must be reaped by someone else.  So
the tracee can be re-parented with ->exit_signal != SIGCHLD, and if
/sbin/init doesn't use __WALL it becomes unreapable.  This was fixed by
the previous commit, but it was the temporary hack.

1. Add the new exit_state, EXIT_TRACE. It means that the task is the
   traced zombie, debugger is going to detach and notify its natural
   parent.

   This new state is actually EXIT_ZOMBIE | EXIT_DEAD. This way we
   can avoid the changes in proc/kgdb code, get_task_state() still
   reports "X (dead)" in this case.

   Note: with or without this change userspace can see Z -> X -> Z
   transition. Not really bad, but probably makes sense to fix.

2. Change wait_task_zombie() to use EXIT_TRACE instead of EXIT_DEAD
   if we need to notify the ->real_parent.

3. Revert the previous hack in reparent_leader(), now that EXIT_DEAD
   is always the final state we can safely ignore such a task.

4. Change wait_consider_task() to check EXIT_TRACE separately and kill
   the racy and no longer needed ptrace_reparented() case.

   If ptrace == T an EXIT_TRACE thread should be simply ignored, the
   owner of this state is going to ptrace_unlink() this task. We can
   pretend that it was already removed from ->ptraced list.

   Otherwise we should skip this thread too but clear ->notask_error,
   we must be the natural parent and debugger is going to untrace and
   notify us. IOW, this doesn't differ from "EXIT_ZOMBIE && p->ptrace"
   even if the task was already untraced.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reported-by: NJan Kratochvil <jan.kratochvil@redhat.com>
Reported-by: NMichal Schmidt <mschmidt@redhat.com>
Tested-by: NMichal Schmidt <mschmidt@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Lennart Poettering <lpoetter@redhat.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Starting from commit c4ad8f98 ("execve: use 'struct filename *' for
executable name passing") bprm->filename can not go away after
flush_old_exec(), so we do not need to save the binary name in
bprm->tcomm[] added by 96e02d15 ("exec: fix use-after-free bug in
setup_new_exec()").

And there was never need for filename_to_taskname-like code, we can
simply do set_task_comm(kbasename(filename).

This patch has to change set_task_comm() and trace_task_rename() to
accept "const char *", but I think this change is also good.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

LAST_CPUPID_MASK is calculated using LAST_CPUPID_WIDTH.  However
LAST_CPUPID_WIDTH itself can be 0.  (when LAST_CPUPID_NOT_IN_PAGE_FLAGS is
set).  In such a case LAST_CPUPID_MASK turns out to be 0.

But with recent commit 1ae71d03: (mm: numa: bugfix for
LAST_CPUPID_NOT_IN_PAGE_FLAGS) if LAST_CPUPID_MASK is 0,
page_cpupid_xchg_last() and page_cpupid_reset_last() causes
page->_last_cpupid to be set to 0.

This causes performance regression. Its almost as if numa_balancing is
off.

Fix LAST_CPUPID_MASK by using LAST_CPUPID_SHIFT instead of
LAST_CPUPID_WIDTH.

Some performance numbers and perf stats with and without the fix.

(3.14-rc6)
----------
numa01

 Performance counter stats for '/usr/bin/time -f %e %S %U %c %w -o start_bench.out -a ./numa01':

         12,27,462 cs                                                           [100.00%]
          2,41,957 migrations                                                   [100.00%]
       1,68,01,713 faults                                                       [100.00%]
    7,99,35,29,041 cache-misses
            98,808 migrate:mm_migrate_pages                                     [100.00%]

    1407.690148814 seconds time elapsed

numa02

 Performance counter stats for '/usr/bin/time -f %e %S %U %c %w -o start_bench.out -a ./numa02':

            63,065 cs                                                           [100.00%]
            14,364 migrations                                                   [100.00%]
          2,08,118 faults                                                       [100.00%]
      25,32,59,404 cache-misses
                12 migrate:mm_migrate_pages                                     [100.00%]

      63.840827219 seconds time elapsed

(3.14-rc6 with fix)
-------------------
numa01

 Performance counter stats for '/usr/bin/time -f %e %S %U %c %w -o start_bench.out -a ./numa01':

          9,68,911 cs                                                           [100.00%]
          1,01,414 migrations                                                   [100.00%]
         88,38,697 faults                                                       [100.00%]
    4,42,92,51,042 cache-misses
          4,25,060 migrate:mm_migrate_pages                                     [100.00%]

     685.965331189 seconds time elapsed

numa02

 Performance counter stats for '/usr/bin/time -f %e %S %U %c %w -o start_bench.out -a ./numa02':

            17,543 cs                                                           [100.00%]
             2,962 migrations                                                   [100.00%]
          1,17,843 faults                                                       [100.00%]
      11,80,61,644 cache-misses
            12,358 migrate:mm_migrate_pages                                     [100.00%]

      20.380132343 seconds time elapsed
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit f9acc8c7 ("readahead: sanify file_ra_state names") left
ra_submit with a single function call.

Move ra_submit to internal.h and inline it to save some stack.  Thanks
to Andrew Morton for commenting different versions.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's only one caller of set_page_dirty_balance() and that will call it
with page_mkwrite == 0.

The page_mkwrite argument was unused since commit b827e496 "mm: close
page_mkwrite races".
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mem_cgroup_newpage_charge is used only for charging anonymous memory so
it is better to rename it to mem_cgroup_charge_anon.

mem_cgroup_cache_charge is used for file backed memory so rename it to
mem_cgroup_charge_file.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of returning NULL from try_get_mem_cgroup_from_mm() when the mm
owner is exiting, just return root_mem_cgroup.  This makes sense for all
callsites and gets rid of some of them having to fallback manually.

[fengguang.wu@intel.com: fix warnings]
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I tried to use 'dump_page(page, __func__)' for debugging, but it triggers
warning:

  warning: passing argument 2 of `dump_page' discards `const' qualifier from pointer target type [enabled by default]

Let's convert 'reason' to 'const char *' in dump_page() and friends: we
shouldn't modify it anyway.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The res_counter_{charge,uncharge}_locked() variants are not used in the
kernel outside of the resource counter code itself, so remove the
interface.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Tim Hockin <thockin@google.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>