- 29 3月, 2009 1 次提交
-
-
由 Flavio Leitner 提交于
Add support for the Broadcom HT1100 LD chipset (SMBus function.) Signed-off-by: NFlavio Leitner <fbl@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 08 2月, 2008 1 次提交
-
-
由 Jean Delvare 提交于
It's about time to reflect the move of the lm-sensors project to lm-sensors.org. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 31 8月, 2007 1 次提交
-
-
由 Shane Huang 提交于
We find that SB700 and SB800 use the same SMBus device ID as SB600, which is 0x4385, instead of the already submitted 0x4395. Besides removing the wrong SB700 device ID, add SB800 support to kernel, by renaming the PCI_DEVICE_ID_ATI_IXP600_SMBUS into PCI_DEVICE_ID_ATI_SBX00_SMBUS. Signed-off-by: NShane Huang <shane.huang@amd.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 7月, 2007 1 次提交
-
-
由 Henry Su 提交于
Add the SMBus device ID for ATI SB700. Signed-off-by: NHenry Su <Henry.su@amd.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 14 2月, 2007 1 次提交
-
-
由 Jean Delvare 提交于
Add support for the ATI SB600 SMBus controller. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 23 6月, 2006 4 次提交
-
-
由 Jean Delvare 提交于
Properly document on which systems the i2c-piix4 SMBus driver will refuse to load. Hopefully this will make it clearer for users, which were often wondering why their destop or server systems were detected as laptops. Closes bug #6429. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Fix i2c-piix4 documentation typo. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rudolf Marek 提交于
This patch removes the fix_hstcfg option from the driver and related SMBus Interrupt Select register magic because now we know what are valid values for this register. This patch updates the documentation and adds new IRQ mode check so we are sure not to miss any new "unusual" value. The PCI quirk for users of fix_hstcfg was not developed because the chipset lacks of subsystem ID registers and DMI is stated "To be filled". Impact to existing systems is minimal because the problem showed up on motherboards like 10 years back. On the other hand users of newer Serverworks and HT1000 systems won't be misleaded by the message suggesting to try the fix_hstcfg any more. Signed-off-by: NRudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rudolf Marek 提交于
This patch adds the ATI IXP southbridges support to i2c-piix4, as it turned out those chips are compatible with it. Signed-off-by: NRudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 24 3月, 2006 1 次提交
-
-
由 Martin Devera 提交于
Add Broadcom HT-1000 south bridge's PCI ID to i2c-piix driver. Note that at least on Supermicro H8SSL it uses non-standard SMBHSTCFG = 3 and standard values like 0 or 9 causes hangup. Signed-off-by: NMartin Devera <devik@cdi.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-