Disable IMR region if it is enabled in the TLVs,
but disabled at runtime by the FW.
Signed-off-by: NMukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.2a696656a161.I99705472a8838121ffaca72977015dc2069549b9@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

There are no shipping firmware versions with this, and there
will also not be in the future, so remove the support.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.8b3c8b4adf41.Ib3ddb6b250ea2dd72b4ecc88bdd5cffb86af1dcc@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

The module param "enable_ini" is currently used to be enable/disable ini.
Add the option to configure the FW debug preset via this module param,
by change it type from boolean to an integer.
Signed-off-by: NAyala Barazani <ayala.barazani@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.4929e4b14956.I1bdffa4c37d4ee349aa0001978b716b96e38b090@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Add a flags bitfield in REDUCED_TX_POWER_CMD, and
send it as is to FW.
Signed-off-by: NAyala Barazani <ayala.barazani@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.55c2f014f5ee.Iceb632f620de959800f979e212f0dc20240f9d38@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Start supporting API version 71 for AX devices.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.d0898482506f.I2de2f9140c23f39a837f68199bbaf15a20f26abb@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

To work properly in 6G band, declare HE 6G capabilities. Without this fix,
it can only TX/RX with OFDM rates.
Signed-off-by: NPing-Ke Shih <pkshih@realtek.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307012741.6371-1-pkshih@realtek.com

Bit 2 and 3 are reserved on 5/6 GHz and bit 1 is reserved on 2.4 GHz,
so the driver should only set the non-reserved bits according
to band.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NPing-Ke Shih <pkshih@realtek.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220301004331.6621-1-pkshih@realtek.com

We found management frames get stuck when wifi chip
enters low ps mode. So we add one notify wake function
to trigger wifi chip into normal mode before forwarding
management frames.
Signed-off-by: NChin-Yen Lee <timlee@realtek.com>
Signed-off-by: NPing-Ke Shih <pkshih@realtek.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220225030851.13327-3-pkshih@realtek.com

Declare this function allows us to use customized scanning policy, so
each scan takes less time. This is a similar implementation to hw_scan
in rtw88, except that we offload more items to firmware and extend the
maximum IE length. For backward compatibility, we fallback to sw_scan
when firmware does not support this feature.
Signed-off-by: NPo Hao Huang <phhuang@realtek.com>
Signed-off-by: NPing-Ke Shih <pkshih@realtek.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220225030851.13327-2-pkshih@realtek.com

Calculate the offset of center and primary frequencies to get hardware
indices of center channel and primary channel, and then use them to
configure hardware to a specific channel.
Signed-off-by: NPing-Ke Shih <pkshih@realtek.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220222032103.29392-1-pkshih@realtek.com

ath.git patches for v5.18. Major changes:

ath11k

* debugfs interface to configure firmware debug log level

* debugfs interface to test Target Wake Time (TWT)

* provide 802.11ax High Efficiency (HE) data via radiotap

ath9k

* use hw_random API instead of directly dumping into random.c

wcn36xx

* fix wcn3660 to work on 5 GHz band

mt76 patches for 5.18

- bugfixes
- mt7915 thermal management improvements
- SAR support for more mt76 drivers
- mt7986 wmac support on mt7915

When operating on a mix of DFS and non-DFS channels, the driver only checks
the CAC status of the control channel. This causes beacons/tx to fail if the
control channel is on a non-DFS channel.
Fix this by calling cfg80211_reg_can_beacon to determine the DFS status of
all affected channels
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Fix following coccicheck warning:
./drivers/net/wireless/mediatek/mt76/mt7915/mac.c:768:29-31:
WARNING !A || A && B is equivalent to !A || B
Signed-off-by: NWan Jiabing <wanjiabing@vivo.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Similar to mt7915 driver, do not aggregate injected frames in
HW A-MSDU block.
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

By default, mt7915e does not enable thermal management until the default
thermal zone does not reach a trip point.  If the rest of the system
have better cooling than the wireless hardware, then it is possible that
the wireless chip can overheat while the rest of the system is fine.
Signed-off-by: NNicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

The firmware-controlled actual throttle state was previously available
by reading the cooling_device, but this confused the thermal subsystem.
Add a hwmon attribute to get it instead.
Signed-off-by: NNicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

mt7915e registers a cooling_device with wrong semantics:

1. cooling_device expect that higher states values should cool more, but
   mt7915e did the opposite...  with the exception of state == 0, which
   should "disable thermal management", but does not seem to have any
   effect since the previous state is kept.

The result is that when the thermal zone heats up a bit and bumps the
cooling_device state from 0 to 1 to cool a bit, the performance is
destroyed, and when going back from 1 to 0, the performance stays bad.

2. Reading the cooling_device state does not always return the last
   written state, but can return the actual hardware throttle state,
   which is different.

This is a problem because the mt7915 firmware actually implement the
equivalent of a thermal zone with trip points.  Setting the cooling
device state actually changes the throttles at each trip point, so the
following could occur if the first issue is fixed:

- thermal subsystem set state to 100% power (state=0)
- mt7915e driver set trip throttles to [100%, 50%, 25%, 12%]
- hardware heats up and decides to switch to 50% power
- thermal subsystem see that power is 50% (state=50), decide to increase
  it to 60% (state=40) because the rest of the system is cool.
- mt7915e driver set trip throttle to [60%, 30%, 15%, 7%]
- hardware thus switches to 30% power
[race to the bottom continues...]

This patch corrects the semantics of the cooling_device to the one that
the thermal subsystem expect it.
Signed-off-by: NNicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Instead of just taking the maximum per-chain signal strength values,
add an approximation for the sum of the combined signal.
This should more accurately reflect the real signal strength, especially
if the per-chain signal strength values are close to each other
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Use min_t() in order to make code cleaner.
Reported-by: NZeal Robot <zealci@zte.com.cn>
Signed-off-by: NChangcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

The muru enable/disable are only set after the first station connection.
Without this patch, the firmware couldn't enable muru
if the first connected station is non-HE type.

Fixes: 16bff457 ("mt76: mt7915: rework mt7915_mcu_sta_muru_tlv()")
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NMeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Add missing band idx check for DBDC cases.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Smatch reports the following:
drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865
mt7615_mac_adjust_sensitivity() warn: assigning (-110) to unsigned
variable 'def_th'
drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865
mt7615_mac_adjust_sensitivity() warn: assigning (-98) to unsigned
variable 'def_th'
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Newer chips such as MT7915 require up to 16-bits for this field.

Fixes: 49126ac1 ("mt76: connac: move mt76_connac_mcu_bss_basic_tlv in connac module")
Signed-off-by: NChad Monroe <chad.monroe@smartrg.com>
Acked-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Fix the following sparse warning in mt7915_mac_tx_free routine:
warning: incorrect type in assignment (different base types)
   expected unsigned int [usertype] *cur_info
   got restricted __le32 *
   warning: cast to restricted __le32

Fixes: c17780e7 ("mt76: mt7915: add txfree event v3")
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Fix the following sparse warnings:
warning: incorrect type in initializer (different base types)
   expected restricted __le16 [usertype] msg_type
   got int
warning: incorrect type in assignment (different base types)
   expected restricted __le32 [usertype] timestamp
   got unsigned int

Fixes: 988845c9 ("mt76: mt7915: add support for passing chip/firmware debug data to user space")
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

The following error is see from the compiler:

  mt7615/debugfs.c: In function ‘mt7615_ext_mac_addr_read’:
  mt7615/debugfs.c:465:1: warning: the frame size of 1072 bytes is
    larger than 1024 bytes [-Wframe-larger-than=]

The issue is due to allocating a buffer as string storage.

Fix by converting to a dynamical allocation of the buffer.
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NDeren Wu <deren.wu@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Initialize smps mode to prevent firmware rate adaptation issue.
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NPeter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

The wfsys of MT7986 has only single adie chip for non-dbdc devices,
and it binds to band1 by default. Hence this patch adds band_idx to
explicitly configure phy accordingly.
Co-developed-by: NSujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: NSujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: NShayne Chen <shayne.chen@mediatek.com>
Signed-off-by: NShayne Chen <shayne.chen@mediatek.com>
Signed-off-by: NBo Jiao <Bo.Jiao@mediatek.com>
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NBo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

This adds MT7986 SoC integrated multi-band 4x4 WiFi 6/6E.
Co-developed-by: NPeter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: NPeter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NSujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: NBo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Reading through the commit history, it looks like
there is no special need why we must skip the first 4 bytes
in this trace call:

trace_ath10k_htt_rx_desc(ar, (void*)rx_desc + sizeof(u32),
			 hw->rx_desc_ops->rx_desc_size - sizeof(u32));

found in the function ath10k_htt_rx_amsdu_pop in the file htt_rx.c

i think the original author
(who is also the one who added rx_desc tracing capabilities
in a0883cf7) just wanted to trace the rx_desc contents,
ignoring the fw_rx_desc_base info field
(which is the part being skipped over).
But the trace_ath10k_htt_rx_desc later added
don't care about skipping it, so it may be good
to uniform this call to the others in the file.
But this would change the output of the trace and
thus it may be a problem for tools that rely on it.
Therefore I propose until further discussion
to just keep it as it is and just fix the pointer arithmetic bug.

Add missing void* cast to rx descriptor pointer in order to
properly skip the initial 4 bytes of the rx descriptor
when passing it to trace_ath10k_htt_rx_desc trace function.

This fixes the pointer arithmetic error detected
by Dan Carpenter's static analysis tool.

Fixes: 6bae9de6 ("ath10k: abstract htt_rx_desc structure")

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1
Signed-off-by: NFrancesco Magliocca <franciman12@gmail.com>
Link: https://lore.kernel.org/ath10k/20220201130900.GD22458@kili/Signed-off-by: NKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220221122638.7971-1-franciman12@gmail.com

There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/78Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: NKees Cook <keescook@chromium.org>
Acked-by: NChristian Lamparter <chunkeey@gmail.com>
Signed-off-by: NKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220216194955.GA904126@embeddedor

Target copies spectral report and CFR report through dbring to
host for further processing. This mechanism involves ring and
buffer management in the Host, FW, and uCode, where improper
tail pointer update issues are seen.

This dbring debug support help to debug such issues by tracking
head and tail pointer movement along with the timestamp at which
each buffer is received and replenished.

Provide a debugfs interface to enalbe/disable dbring debug
support and dump the dbring debug entries.

Also introduced a new hardware param to add dbring debugfs support
for few hardwares which are using dbings.

Usage:

echo <dbr_id> <val> > /sys/kernel/debug/ath11k/ipq8074_2/
mac0/enable_dbr_debug

dbr_id: 0 for spectral and 1 for CFR
val: 0 - disable, 1 - enable.

Tested-on: IPQ8074 WLAN.HK.2.4.0.1-01467-QCAHKSWPL_SILICONZ-1
Signed-off-by: NVenkateswara Naralasetty <quic_vnaralas@quicinc.com>
Signed-off-by: NKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1645366059-11798-1-git-send-email-quic_vnaralas@quicinc.com

Translate HE status to radiotap format. This uses HE radiotap
definitions from include/net/ieee80211_radiotap.h.
Co-developed-by: NMiles Hu <milehu@codeaurora.org>
Signed-off-by: NMiles Hu <milehu@codeaurora.org>
Signed-off-by: NAnilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: NPradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: NKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220217012112.31211-4-pradeepc@codeaurora.org

Add new bitmasks and macro definitions required for parsing HE
status tlvs. Decode HE status tlvs, which will used in dumping
ppdu stats as well as updating radiotap headers.
Co-developed-by: NMiles Hu <milehu@codeaurora.org>
Signed-off-by: NMiles Hu <milehu@codeaurora.org>
Signed-off-by: NPradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: NKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220217012112.31211-3-pradeepc@codeaurora.org

This allows us to pass HE rates down into the stack.
Co-developed-by: NMiles Hu <milehu@codeaurora.org>
Signed-off-by: NMiles Hu <milehu@codeaurora.org>
Signed-off-by: NJohn Crispin <john@phrozen.org>
Signed-off-by: NPradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: NKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220217012112.31211-2-pradeepc@codeaurora.org

Add an entry for MT7986 SoC.
Signed-off-by: NPeter Chiu <chui-hao.chiu@mediatek.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

For non-mmio devices, should set fc values to proper txwi config

Fixes: 48fab5bb ("mt76: mt7921: introduce mt7921s support")
Tested-by: NSean Wang <sean.wang@mediatek.com>
Co-developed-by: NLeon Yen <Leon.Yen@mediatek.com>
Signed-off-by: NLeon Yen <Leon.Yen@mediatek.com>
Signed-off-by: NDeren Wu <deren.wu@mediatek.com>
Acked-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Free the skb of fw monitor packets.
Signed-off-by: NShayne Chen <shayne.chen@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Fix channel state update error issue due to wrong
register access for mt7916.
Signed-off-by: NSujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: NBo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>