Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 10 10月, 2013 2 次提交
  3. 09 10月, 2013 22 次提交
  5. 04 10月, 2013 14 次提交
    • D
      drm/i915: Use adjusted_mode in the fastboot hack to disable pfit · d7bf63f2
      由 Damien Lespiau 提交于 
      When booting with i915.fastboot=1, we always take tha code path and end
up undoing what we're trying to do with adjusted_mode.

Hopefully, as the fastboot hardware readout code is using adjusted_mode
as well, it should be equivalent.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      d7bf63f2
    • D
      drm/i915: Add a more detailed comment about the set_base() fastboot hack · bb2043de
      由 Damien Lespiau 提交于 
      Instead of it just being on the mailing list, let's put Jesse's
explanation next to the code in question.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      bb2043de
    • C
      drm/i915/vlv: Turn off power gate for BIOS-less system. · 02f4c9e0
      由 Chon Ming Lee 提交于 
      During system boot up, by default, the power gate for render, media and
display well still power gated.  Normally, BIOS will turn off the power
gate.  In the BIOS-less system, the driver need to turn off the power
gate very early during driver load.

v2: Move this to intel_uncore_sanitize to allow it to get call during
resume path. (Daniel)
v3: Remove redundant write 0 to DPIO_CTL, and use DPIO_RESET instead of
just 0x1 (Ville)
    Add turn of power gate for display 2d/render well/media well.
v4: Remove toggle cmnreset in intel_uncore_sanitize.  Cmnreset should
toggle after CRI clock source has been selected.  Jesse DPIO reset patch
which toggle the cmnreset in intel_modeset_init_hw() should handle it.
(Ville)
Signed-off-by: NChon Ming Lee <chon.ming.lee@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      02f4c9e0
    • J
      drm/i915/vlv: reset DPIO on load and resume v2 · 40e9cf64
      由 Jesse Barnes 提交于 
      DPIO needs to have common reset de-asserted on soft resets like boot and
S3.  In some cases, the BIOS will have done this for us, but it should
be safe to do at runtime as well, as long as we do it when the pipes are
otherwise off.

v2: update bit name to match docs better (Ville)
    reset after CRI clock select (Ville)

References: https://bugs.freedesktop.org/show_bug.cgi?id=69166Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      40e9cf64
    • R
      drm/i915: Simplify PSR debugfs · a031d709
      由 Rodrigo Vivi 提交于 
      for igt test case.

v2: remove trailing spaces and fix conflicts
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet:
- make it comipile
- s/IS_HASWELL/HAS_PSR/]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      a031d709
    • C
      drm/i915: Tweak RPS thresholds to more aggressively downclock · dd75fdc8
      由 Chris Wilson 提交于 
      After applying wait-boost we often find ourselves stuck at higher clocks
than required. The current threshold value requires the GPU to be
continuously and completely idle for 313ms before it is dropped by one
bin. Conversely, we require the GPU to be busy for an average of 90% over
a 84ms period before we upclock. So the current thresholds almost never
downclock the GPU, and respond very slowly to sudden demands for more
power. It is easy to observe that we currently lock into the wrong bin
and both underperform in benchmarks and consume more power than optimal
(just by repeating the task and measuring the different results).

An alternative approach, as discussed in the bspec, is to use a
continuous threshold for upclocking, and an average value for downclocking.
This is good for quickly detecting and reacting to state changes within a
frame, however it fails with the common throttling method of waiting
upon the outstanding frame - at least it is difficult to choose a
threshold that works well at 15,000fps and at 60fps. So continue to use
average busy/idle loads to determine frequency change.

v2: Use 3 power zones to keep frequencies low in steady-state mostly
idle (e.g. scrolling, interactive 2D drawing), and frequencies high
for demanding games. In between those end-states, we use a
fast-reclocking algorithm to converge more quickly on the desired bin.

v3: Bug fixes - make sure we reset adj after switching power zones.

v4: Tune - drop the continuous busy thresholds as it prevents us from
choosing the right frequency for glxgears style swap benchmarks. Instead
the goal is to be able to find the right clocks irrespective of the
wait-boost.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Stéphane Marchesin <stephane.marchesin@gmail.com>
Cc: Owen Taylor <otaylor@redhat.com>
Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com>
Cc: "Zhuang, Lena" <lena.zhuang@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      dd75fdc8
    • C
      drm/i915: Boost RPS frequency for CPU stalls · b29c19b6
      由 Chris Wilson 提交于 
      If we encounter a situation where the CPU blocks waiting for results
from the GPU, give the GPU a kick to boost its the frequency.

This should work to reduce user interface stalls and to quickly promote
mesa to high frequencies - but the cost is that our requested frequency
stalls high (as we do not idle for long enough before rc6 to start
reducing frequencies, nor are we aggressive at down clocking an
underused GPU). However, this should be mitigated by rc6 itself powering
off the GPU when idle, and that energy use is dependent upon the workload
of the GPU in addition to its frequency (e.g. the math or sampler
functions only consume power when used). Still, this is likely to
adversely affect light workloads.

In particular, this nearly eliminates the highly noticeable wake-up lag
in animations from idle. For example, expose or workspace transitions.
(However, given the situation where we fail to downclock, our requested
frequency is almost always the maximum, except for Baytrail where we
manually downclock upon idling. This often masks the latency of
upclocking after being idle, so animations are typically smooth - at the
cost of increased power consumption.)

Stéphane raised the concern that this will punish good applications and
reward bad applications - but due to the nature of how mesa performs its
client throttling, I believe all mesa applications will be roughly
equally affected. To address this concern, and to prevent applications
like compositors from permanently boosting the RPS state, we ratelimit the
frequency of the wait-boosts each client recieves.

Unfortunately, this techinique is ineffective with Ironlake - which also
has dynamic render power states and suffers just as dramatically. For
Ironlake, the thermal/power headroom is shared with the CPU through
Intelligent Power Sharing and the intel-ips module. This leaves us with
no GPU boost frequencies available when coming out of idle, and due to
hardware limitations we cannot change the arbitration between the CPU and
GPU quickly enough to be effective.

v2: Limit each client to receiving a single boost for each active period.
    Tested by QA to only marginally increase power, and to demonstrably
    increase throughput in games. No latency measurements yet.

v3: Cater for front-buffer rendering with manual throttling.

v4: Tidy up.

v5: Sadly the compositor needs frequent boosts as it may never idle, but
due to its picking mechanism (using ReadPixels) may require frequent
waits. Those waits, along with the waits for the vrefresh swap, conspire
to keep the GPU at low frequencies despite the interactive latency. To
overcome this we ditch the one-boost-per-active-period and just ratelimit
the number of wait-boosts each client can receive.
Reported-and-tested-by: NPaul Neumann <paul104x@yahoo.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Stéphane Marchesin <stephane.marchesin@gmail.com>
Cc: Owen Taylor <otaylor@redhat.com>
Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com>
Cc: "Zhuang, Lena" <lena.zhuang@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: No extern for function prototypes in headers.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      b29c19b6
    • C
      drm/i915: Fix __wait_seqno to use true infinite timeouts · 094f9a54
      由 Chris Wilson 提交于 
      When we switched to always using a timeout in conjunction with
wait_seqno, we lost the ability to detect missed interrupts. Since, we
have had issues with interrupts on a number of generations, and they are
required to be delivered in a timely fashion for a smooth UX, it is
important that we do log errors found in the wild and prevent the
display stalling for upwards of 1s every time the seqno interrupt is
missed.

Rather than continue to fix up the timeouts to work around the interface
impedence in wait_event_*(), open code the combination of
wait_event[_interruptible][_timeout], and use the exposed timer to
poll for seqno should we detect a lost interrupt.

v2: In order to satisfy the debug requirement of logging missed
interrupts with the real world requirments of making machines work even
if interrupts are hosed, we revert to polling after detecting a missed
interrupt.

v3: Throw in a debugfs interface to simulate broken hw not reporting
interrupts.

v4: s/EGAIN/EAGAIN/ (Imre)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NImre Deak <imre.deak@intel.com>
[danvet: Don't use the struct typedef in new code.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      094f9a54
    • C
      drm/i915: Add some missing steps to i915_driver_load error path · cbb47d17
      由 Chris Wilson 提交于 
      We missed adding a few cleanup steps for recent additions.

Reviewer:  Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      cbb47d17
    • B
      drm/i915: Clean up the ring scaling calculations · f6aca45c
      由 Ben Widawsky 提交于 
      This patch attempts to clean up the ring/IA scaling programming in the
following ways.
1. Fix the comment about the DDR frequency. The math is 266MHz, not
133MHz. Formula was right, docs are wrong.

2. Mask the DCLK register since I don't know how it is defined on future
platforms.

3. use mult_frac instead of magic math.

This helps for future platform enabling.

v2: Actually use the right patch. The v1 was a mix of things, none of
which was right. Note that due to rounding, we actually get different
values (slightly higher) for the effective ring frequency.

v3: Use 1.25 instead of 1.33 as the original code did. (Jesse)

CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      f6aca45c
    • V
      drm/i915: Don't populate pipe_src_{w,h} multiple times · e41a56be
      由 Ville Syrjälä 提交于 
      If we ever end up doing the retry loop due to bandwidth constraints, we
would rewrite pipe_src_{w,n} based on adjusted_mode timings. But by that
time the encoder may have already replaced the adjusted_mode with a
fixed panel mode, which would then corrupt pipe_src_{w,h}.

v2: Use requested_mode and slap on a big comment from Daniel
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      e41a56be
    • P
      drm/i915: implement the Haswell mode set sequence workaround · e4916946
      由 Paulo Zanoni 提交于 
      This workaround is described in the mode set sequence documentation.
When enabling planes for the second pipe, we need to wait for 2
vblanks on the first pipe. This should solve "a flash of screen
corruption if planes are enabled on second/third pipe during the time
that big FIFO mode is exiting". Watermarks are fun :)

v2: Save indentation levels
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      e4916946
    • V
      drm/i915: Disable/enable planes as the first/last thing during modeset on HSW · dda9a66a
      由 Ville Syrjälä 提交于 
      Refactor the plane enabling/disabling into helper functions and move
the calls to happen as the first thing during .crtc_disable, and the
last thing during .crtc_enable.

Those are the two clear points where we are sure that the pipe is
actually running regardless of the encoder type or hardware
generation.

v2: Made by Paulo:
  Remove the code touching everything but the Haswell functions. We
  need this change on Haswell right now since it fixes a FIFO underrun
  that we get on pipe A while we enable pipe B (see the workaround
  notes on the Haswell mode set sequence documentation). We can bring
  back the code to gens 2-7 later, once they're tested.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      dda9a66a
    • J
      i915/vlv: untangle integrated clock source handling v4 · f6071166
      由 Jesse Barnes 提交于 
      The global integrated clock source bit resides in DPLL B on VLV, but we
were treating it as a per-pipe resource.  It needs to be set whenever
any PLL is active, so pull setting the bit out of vlv_update_pll and
into vlv_enable_pll.  Also add a vlv_disable_pll to prevent disabling it
when pipe B shuts down.

I'm guessing on the references here, I expect this to bite any config
where multiple displays are active or displays are moved from pipe to
pipe.

v2: re-add bits in vlv_update_pll to keep from confusing the state checker
v3: use enum pipe checks (Daniel)
    set CRI clock source early (Ville)
    consistently set CRI clock source everywhere (Ville)
v4: drop unnecessary setting of bit in vlv enable pll (Ville)

References: https://bugs.freedesktop.org/show_bug.cgi?id=67245
References: https://bugs.freedesktop.org/show_bug.cgi?id=69693Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[danvet: s/1/PIPE_B/]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      f6071166
  7. 01 10月, 2013 2 次提交