if other threads have holden the reset lock, recovery will
fail to try_lock. Therefore we introduce atomic hive->in_reset
and adev->in_gpu_reset, to avoid reentering GPU recovery.

v2:
drop "? true : false" in the definition of amdgpu_in_reset
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NDennis Li <Dennis.Li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove DRM_SCHED_PRIORITY_LOW, as it was used
in only one place.

Rename and separate by a line
DRM_SCHED_PRIORITY_MAX to DRM_SCHED_PRIORITY_COUNT
as it represents a (total) count of said
priorities and it is used as such in loops
throughout the code. (0-based indexing is the
the count number.)

Remove redundant word HIGH in priority names,
and rename *KERNEL* to *HIGH*, as it really
means that, high.

v2: Add back KERNEL and remove SW and HW,
    in lieu of a single HIGH between NORMAL and KERNEL.
Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The whole approach wasn't thought through till the end.

We already had a reset lock like this in the past and it caused the same problems like this one.

Completely revert the patch for now and add individual trylock protection to the hardware access functions as necessary.

This reverts commit df9c8d1a.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's related to the memory manager so move it there.

v2: inline the structure
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's related to the memory manager so move it there.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's more related to memory management than memory
controller.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We never use them.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This will allow us to split the allocation for systems
where we have to keep the stolen memory around to avoid
S3 issues.  This way we don't waste as much memory and
still avoid any screen artifacts during the bios to
driver transition.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rather than leaving this as a gmc v9 specific hack.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since that is where we store the other data related to
the stolen vga memory.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Should be functionally the same since nothing else is
allocated at that point, but let's be exact.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when GPU hang, driver has multi-paths to enter amdgpu_device_gpu_recover,
the atomic adev->in_gpu_reset and hive->in_reset are used to avoid
re-entering GPU recovery.

During GPU reset and resume, it is unsafe that other threads access GPU,
which maybe cause GPU reset failed. Therefore the new rw_semaphore
adev->reset_sem is introduced, which protect GPU from being accessed by
external threads during recovery.

v2:
1. add rwlock for some ioctls, debugfs and file-close function.
2. change to use dqm->is_resetting and dqm_lock for protection in kfd
driver.
3. remove try_lock and change adev->in_gpu_reset as atomic, to avoid
re-enter GPU recovery for the same GPU hang.

v3:
1. change back to use adev->reset_sem to protect kfd callback
functions, because dqm_lock couldn't protect all codes, for example:
free_mqd must be called outside of dqm_lock;

[ 1230.176199] Hardware name: Supermicro SYS-7049GP-TRT/X11DPG-QT, BIOS 3.1 05/23/2019
[ 1230.177221] Call Trace:
[ 1230.178249]  dump_stack+0x98/0xd5
[ 1230.179443]  amdgpu_virt_kiq_reg_write_reg_wait+0x181/0x190 [amdgpu]
[ 1230.180673]  gmc_v9_0_flush_gpu_tlb+0xcc/0x310 [amdgpu]
[ 1230.181882]  amdgpu_gart_unbind+0xa9/0xe0 [amdgpu]
[ 1230.183098]  amdgpu_ttm_backend_unbind+0x46/0x180 [amdgpu]
[ 1230.184239]  ? ttm_bo_put+0x171/0x5f0 [ttm]
[ 1230.185394]  ttm_tt_unbind+0x21/0x40 [ttm]
[ 1230.186558]  ttm_tt_destroy.part.12+0x12/0x60 [ttm]
[ 1230.187707]  ttm_tt_destroy+0x13/0x20 [ttm]
[ 1230.188832]  ttm_bo_cleanup_memtype_use+0x36/0x80 [ttm]
[ 1230.189979]  ttm_bo_put+0x1be/0x5f0 [ttm]
[ 1230.191230]  amdgpu_bo_unref+0x1e/0x30 [amdgpu]
[ 1230.192522]  amdgpu_amdkfd_free_gtt_mem+0xaf/0x140 [amdgpu]
[ 1230.193833]  free_mqd+0x25/0x40 [amdgpu]
[ 1230.195143]  destroy_queue_cpsch+0x1a7/0x270 [amdgpu]
[ 1230.196475]  pqm_destroy_queue+0x105/0x260 [amdgpu]
[ 1230.197819]  kfd_ioctl_destroy_queue+0x37/0x70 [amdgpu]
[ 1230.199154]  kfd_ioctl+0x277/0x500 [amdgpu]
[ 1230.200458]  ? kfd_ioctl_get_clock_counters+0x60/0x60 [amdgpu]
[ 1230.201656]  ? tomoyo_file_ioctl+0x19/0x20
[ 1230.202831]  ksys_ioctl+0x98/0xb0
[ 1230.204004]  __x64_sys_ioctl+0x1a/0x20
[ 1230.205174]  do_syscall_64+0x5f/0x250
[ 1230.206339]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

2. remove try_lock and introduce atomic hive->in_reset, to avoid
re-enter GPU recovery.

v4:
1. remove an unnecessary whitespace change in kfd_chardev.c
2. remove comment codes in amdgpu_device.c
3. add more detailed comment in commit message
4. define a wrap function amdgpu_in_reset

v5:
1. Fix some style issues.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Suggested-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: NChristian König <christian.koenig@amd.com>
Suggested-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: NLijo Lazar <Lijo.Lazar@amd.com>
Suggested-by: NLuben Tukov <luben.tuikov@amd.com>
Signed-off-by: NDennis Li <Dennis.Li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The legacy way to initialize discovery_tmr_size
is using DISCOVERY_TMR_SIZE, while after we reduce
DISCOVERY_TMR_SIZE from 64KB to 4KB, variable
discovery_tmr_size is also reduced to 4KB, this is not
correct, it still should be 64KB, discovery_tmr_size
will be used to calculate ip_discovery reserved mem's
start address and size.

Using DISCOVERY_TMR_OFFSET to init discovery_tmr_size instead.
Signed-off-by: NWenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This includes older APUs like renoir.
Acked-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Used sparse(make C=1) to find these loose ends.

v2:
removed unwanted extra line
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

C2P memory reserved should not in tmr memory range.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

a.Check whether mem train support when try to reserve related memory.
b.Remove ASIC check and atom firmware table version check as the check
of firmware capability is enough to achieve that purpose.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Query reserved tmr size through atom firmwareinfo for Sienna_Cichlid and onwards
for all the use cases (IP discovery/G6 memory
training/profiling/diagnostic data.etc), otherwise, fallback to legacy
approach to check and reserve tmr block for ip discovery data and G6
memory training data respectively
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For Sienna_Cichlid, query fw_reserved_fb_size from vbios directly.
For navi1x, fall back to default 64K TMR size.
For pre-navi, no need to reserve tmr region in top LFB.

v2: fix TMR define (Alex)
v3: partially revert size change
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

GPU address should belong to driver not in memory management.
This patch moves ttm bo.offset and gpu_offset calculation to amdgpu driver.
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372930/

This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.

The change is generated using coccinelle with the following rule:

// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .

@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)
Signed-off-by: NMichel Lespinasse <walken@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: NLaurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Presumably the intent here was that hmm_range_fault() could put the data
into some HW specific format and thus avoid some work. However, nothing
actually does that, and it isn't clear how anything actually could do that
as hmm_range_fault() provides CPU addresses which must be DMA mapped.

Perhaps there is some special HW that does not need DMA mapping, but we
don't have any examples of this, and the theoretical performance win of
avoiding an extra scan over the pfns array doesn't seem worth the
complexity. Plus pfns needs to be scanned anyhow to sort out any
DEVICE_PRIVATE pages.

This version replaces the uint64_t with an usigned long containing a pfn
and fixed flags. On input flags is filled with the HMM_PFN_REQ_* values,
on successful output it is filled with HMM_PFN_* values, describing the
state of the pages.

amdgpu is simple to convert, it doesn't use snapshot and doesn't use
per-page flags.

nouveau uses only 16 hmm_pte entries at most (ie fits in a few cache
lines), and it sweeps over its pfns array a couple of times anyhow. It
also has a nasty call chain before it reaches the dma map and hardware
suggesting performance isn't important:

   nouveau_svm_fault():
     args.i.m.method = NVIF_VMM_V0_PFNMAP
     nouveau_range_fault()
      nvif_object_ioctl()
       client->driver->ioctl()
	  struct nvif_driver nvif_driver_nvkm:
	    .ioctl = nvkm_client_ioctl
	   nvkm_ioctl()
	    nvkm_ioctl_path()
	      nvkm_ioctl_v0[type].func(..)
	      nvkm_ioctl_mthd()
	       nvkm_object_mthd()
		  struct nvkm_object_func nvkm_uvmm:
		    .mthd = nvkm_uvmm_mthd
		   nvkm_uvmm_mthd()
		    nvkm_uvmm_mthd_pfnmap()
		     nvkm_vmm_pfn_map()
		      nvkm_vmm_ptes_get_map()
		       func == gp100_vmm_pgt_pfn
			struct nvkm_vmm_desc_func gp100_vmm_desc_spt:
			  .pfn = gp100_vmm_pgt_pfn
			 nvkm_vmm_iter()
			  REF_PTES == func == gp100_vmm_pgt_pfn()
			    dma_map_page()

Link: https://lore.kernel.org/r/5-v2-b4e84f444c7d+24f57-hmm_no_flags_jgg@mellanox.comAcked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Tested-by: NRalph Campbell <rcampbell@nvidia.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This is just an alias for HMM_PFN_ERROR, nothing cares that the error was
because of a special page vs any other error case.

Link: https://lore.kernel.org/r/4-v2-b4e84f444c7d+24f57-hmm_no_flags_jgg@mellanox.comAcked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Since amdgpu does not use the snapshot mode of hmm_range_fault() a
successful return already proves that all entries in the pfns are
HMM_PFN_VALID, there is no need to check the return result of
hmm_device_entry_to_page().

Link: https://lore.kernel.org/r/3-v2-b4e84f444c7d+24f57-hmm_no_flags_jgg@mellanox.comAcked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

hmm_vma_walk->last is supposed to be updated after every write to the
pfns, so that it can be returned by hmm_range_fault(). However, this is
not done consistently. Fortunately nothing checks the return code of
hmm_range_fault() for anything other than error.

More importantly last must be set before returning -EBUSY as it is used to
prevent reading an output pfn as an input flags when the loop restarts.

For clarity and simplicity make hmm_range_fault() return 0 or -ERRNO. Only
set last when returning -EBUSY.

Link: https://lore.kernel.org/r/2-v2-b4e84f444c7d+24f57-hmm_no_flags_jgg@mellanox.comAcked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Tested-by: NRalph Campbell <rcampbell@nvidia.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

IP discovery is only supported in Navi series and onwards.
There is no need to reserve a portion of vram as discovery
tmr region for pre-Navi adapters.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is to prepare for initializing discovery tmr size per
ASIC type
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the coding style, move and rename the definitions to
better match what they are supposed to be doing.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When the node is larger than 4GB we overrun the size calculation.

Fix this by correctly limiting the size to the window as well.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This should allow us to also support VRAM->GTT moves.

v2: fix missing vram_base_adjustment
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Tested-by: NPierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Cleanup amdgpu_ttm_copy_mem_to_mem by using fewer variables
for the same value.

Rename amdgpu_map_buffer to amdgpu_ttm_map_buffer, move it
to avoid the forward decleration, cleanup by moving the map
decission into the function and add some documentation.

No functional change.

v2: add some more cleanup suggested by Felix
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Tested-by: NPierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Swapping out encrypted BOs doesn't work because they can't change
their physical location without going through a bounce copy.

As a workaround disable evicting encrypted BOs to the system
domain for now.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NPierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This way we should be at least able to move buffers from VRAM to GTT.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NPierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is necessary for TMZ handling during buffer moves and scanout.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NPierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch expands amdgpu_copy_buffer interface with tmz parameter.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch expands sdma copy_buffer interface with tmz parameter.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We have three ib pools, they are normal, VM, direct pools.

Any jobs which schedule IBs without dependence on gpu scheduler should
use DIRECT pool.

Any jobs schedule direct VM update IBs should use VM pool.

Any other jobs use NORMAL pool.

v2: squash in coding style fix
Signed-off-by: Nxinhui pan <xinhui.pan@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Now that flags are handled on a fine-grained per-page basis this global
flag is redundant and has a confusing overlap with the pfn_flags_mask and
default_flags.

Normalize the HMM_FAULT_SNAPSHOT behavior into one place. Callers needing
the SNAPSHOT behavior should set a pfn_flags_mask and default_flags that
always results in a cleared HMM_PFN_VALID. Then no pages will be faulted,
and HMM_FAULT_SNAPSHOT is not a special flow that overrides the masking
mechanism.

As this is the last flag, also remove the flags argument. If future flags
are needed they can be part of the struct hmm_range function arguments.

Link: https://lore.kernel.org/r/20200327200021.29372-5-jgg@ziepe.caReviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove the HMM_PFN_DEVICE_PRIVATE flag, no driver has ever set this flag
on input, and the only place that uses it on output can be trivially
changed to use is_device_private_page().

This removes the ability to request that device_private pages are faulted
back into system memory.

Link: https://lore.kernel.org/r/20200316193216.920734-4-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

1) SRIOV guest KMD doesn't care training buffer
2) if we resered training buffer that will overlap with IP discovery
reservation because training buffer is at vram_size - 0x8000 and
IP discovery is at ()vram_size - 0x10000 => vram_size -1)

v2: squash in warning fix from Nirmoy
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NEmily Deng <Emily.Deng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>