More features for 4.19:
- Map processes to vmids for debugging GPUVM faults
- Raven gfxoff fixes
- Initial gfxoff support for vega12
- Use defines for interrupt sources rather than magic numbers
- DC aux fixes
- Finish DC logging TODO
- Add more DC debugfs interfaces for conformance testing
- Add CRC support for DCN
- Scheduler rework in preparation for load balancing
- Unify common smu9 code
- Clean up UVD instancing support
- ttm cleanups
- Misc fixes and cleanups
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719194001.3488-1-alexander.deucher@amd.com

On GEM side:

- GuC related fixes (Chris, Michal)
- GTT read-only pages support (Jon, Chris)
- More selftests fixes (Chris)
- More GPU reset improvements (Chris)
- Flush caches after GGTT writes (Chris)
- Handle recursive shrinker for vma->last_active allocation (Chris)
- Other execlists fixes (Chris)

On Display side:

- GLK HDMI fix (Clint)
- Rework and cleanup around HPD pin (Ville)
- Preparation work for Display Stream Compression support coming on ICL (Anusha)
- Nuke LVDS lid notification (Ville)
- Assume eDP is always connected (Ville)
- Kill intel panel detection (Ville)
Signed-off-by: NDave Airlie <airlied@redhat.com>

# gpg: Signature made Fri 20 Jul 2018 01:51:45 AM AEST
# gpg:                using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg:                 aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C  E2A3 FA62 5F64 0EEB 13CA

# Conflicts:
#	drivers/gpu/drm/i915/intel_lrc.c
Link: https://patchwork.freedesktop.org/patch/msgid/20180719171257.GA12199@intel.com

drm-misc-next for 4.19:

Core Changes:
- add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil)
- more doc updates (Daniel Vetter)
- fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder)
- dma-buf: correctly place BUG_ON (Michel Dänzer)

Driver Changes:
- more vkms support(Rodrigo Siqueira)
- many fixes and small improments to all drivers
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180718200826.GA20165@juma

misc fixes and cleanups for next.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv55CfRonQ0bo2XiitkCiWTjKwhsP=+ZFhoa-BaJ72Ryew@mail.gmail.com

The whole handle, filp and entity handling is superfluous here.

We should have reviewed that more thoughtfully. It looks like somebody
just made the code instance aware without knowing the background.

v2: fix one more missed case in amdgpu_uvd_suspend
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NChunming  Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not sure what that was every used for, but now it is completely unused.
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NChunming  Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allowing CONFIG_DRM_AMD_DC_DCN1_0 to be disabled on X86 was an
opportunity for display with Raven Ridge accidentally not working.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The 'result' is not initialized correctly. It causes the API
return an error code even on success.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Use the newly added irq source defines rather than magic numbers
for smu7 thermal interrupts.
Rewiewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NRex Zhu <rezhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

With neither LVDS or eDP no longer using intel_panel_detect() we can
kill it, and the accompanying modparam.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-3-ville.syrjala@linux.intel.comReviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

We never registered any kind of lid notifier for eDP, so looking at the
lid status is pretty much bonkers. Let's just consider eDP always
connected instead.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-2-ville.syrjala@linux.intel.comReviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

We broke the LVDS notifier resume thing in (presumably) commit
e2c8b870 ("drm/i915: Use atomic helpers for suspend, v2.") as
we no longer duplicate the current state in the LVDS notifier and
thus we never resume it properly either.

Instead of trying to fix it again let's just kill off the lid
notifier entirely. None of the machines tested thus far have
apparently needed it. Originally the lid notifier was added to
work around cases where the VBIOS was clobbering some of the
hardware state behind the driver's back, mostly on Thinkpads.
We now have a few report of Thinkpads working just fine without
the notifier. So maybe it was misdiagnosed originally, or
something else has changed (ACPI video stuff perhaps?).

If we do end up finding a machine where the VBIOS is still causing
problems I would suggest that we first try setting various bits in
the VBIOS scratch registers. There are several to choose from that
may instruct the VBIOS to steer clear.

With the notifier gone we'll also stop looking at the panel status
in ->detect().

v2: Nuke enum modeset_restore (Rodrigo)

Cc: stable@vger.kernel.org
Cc: Wolfgang Draxinger <wdraxinger.maillist@draxit.de>
Cc: Vito Caputo <vcaputo@pengaru.com>
Cc: kitsunyan <kitsunyan@airmail.cc>
Cc: Joonas Saarinen <jza@saunalahti.fi>
Tested-by: Vito Caputo <vcaputo@pengaru.com> # Thinkapd X61s
Tested-by: kitsunyan <kitsunyan@airmail.cc> # ThinkPad X200
Tested-by: Joonas Saarinen <jza@saunalahti.fi> # Fujitsu Siemens U9210
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105902
References: https://lists.freedesktop.org/archives/intel-gfx/2018-June/169315.html
References: https://bugs.freedesktop.org/show_bug.cgi?id=21230
Fixes: e2c8b870 ("drm/i915: Use atomic helpers for suspend, v2.")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-1-ville.syrjala@linux.intel.comReviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

There's a race between idling the engine and finishing off the last
tasklet (as we may kick the tasklets after declaring an individual
engine idle). However, since we do not need to access the device until
we try to submit to the ELSP register (processing the CSB just requires
normal CPU access to the HWSP, and when idle we should not need to
submit!) we can defer the assertion unto that point. The assertion is
still useful as it does verify that we do hold the longterm GT wakeref
taken from request allocation until request completion.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107274
Fixes: 9512f985 ("drm/i915/execlists: Direct submission of new requests (avoid tasklet/ksoftirqd)")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719075029.28643-1-chris@chris-wilson.co.uk

If we call into the shrinker for direct relcaim inside kmalloc, it will
retire the requests. If we retire the vma->last_active while processing a
new i915_vma_move_to_active() we can upset the delicate bookkeeping
required for the cache. After the possible invocation of the shrinker, we
need to double check the vma->last_active is still valid.

Fixes: 8b293eb5 ("drm/i915: Track the last-active inside the i915_vma")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105600#c39Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719072206.16015-1-chris@chris-wilson.co.uk

We make a decision at module load whether to use the GuC backend or not,
but lose that setup across set-wedge. Currently, the guc doesn't
override the engine->set_default_submission hook letting execlists sneak
back in temporarily on unwedging leading to an unbalanced park/unpark.

v2: Remove comment about switching back temporarily to execlists on
guc_submission_disable(). We currently only call disable on shutdown,
and plan to also call disable before suspend and reset, in which case we
will either restore guc submission or mark the driver as wedged, making
the reset back to execlists pointless.
v3: Move reset.prepare across

Fixes: 63572937 ("drm/i915/execlists: Flush pending preemption events during reset")
Testcase: igt/drv_module_reload/basic-reload-inject
Testcase: igt/gem_eio
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717202932.1423-1-chris@chris-wilson.co.uk

Workaround for issues seen on systems with large amounts of RAM, caused
by display not supporting the same physical address limits as the other
parts of the GPU.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

RC model has these parameters that correspond with each of
15 ranges of RC buffer threshold value in the RC model.
The three elements are range_min_qp, range_max_qp and
range_bpg_offset.

Add the Rate Control range values for eDP/MIPI and DP case.
The actual values are calculated usung a helper function.
This patch adds the shifts to registers where the value will
be written during atomic commit.

v2:
- Use _MMIO_PIPE() instead of _MMIO(_PICK()) (Manasi)
- Combine shifts (Manasi)

Cc: Jose Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-4-git-send-email-anusha.srivatsa@intel.com

Add register defines and  shifts that control the RC buffer threshold
between encoder and decoder for eDP/MIPI and DP cases.

The actual values are calculated usung a helper function.
This patch adds the shifts to registers where the value will
be written during atomic commit.

v2:
- Use _MMIO_PIPE() instead of _MMIO_(_PICK()) (Manasi)
- Combine shifts (Manasi)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-3-git-send-email-anusha.srivatsa@intel.com

Display Stream Compression(DSC) has a set of Picture
Parameter Set(PPS) components that the encoder must
communicate to the decoder.

This patch adds register definitions to
the PPS parameters for eDP/MIPI case and Display Port.

v2:
- Use _MMIO_PIPE instead of _MMIO(_PICK()). (Manasi)
- Use DSC constants as arguments. (Manasi)

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-2-git-send-email-anusha.srivatsa@intel.com

The Picture Parameter Set metadata for DSC has to be sent
to the panel through secondary data packets. Add the error
correction registers, data registers and control registers
for the same.

The control registers for  transcoders A and B are already
defined and will be reused for Icelake purpose. This patch adds
Control register for EDP and transcoder C apart from adding the
PPS data and error registers.

v2: reuse MMIO_TRANS2 for _PPS_DATA and _PPS_ECC.
The  _MMIO_TRANS2(pipe, reg) macro definition takes care of the eDp case

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-1-git-send-email-anusha.srivatsa@intel.com

In the quest to remove all stack VLA usage from the kernel[1], this
uses the maximum sane buffer size and removes copy/paste code.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comReviewed-by: NRex Zhu <rezhu@amd.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

BO ptr already be initialized at definition, we needn't use the complicated
reference.

v2: fix typo at subject line
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove internal/unused kernel module parameters
Signed-off-by: NSonny Jiang <sonny.jiang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Pushing a job can change the ring assignment of an entity.

v2: squash in:
"drm/amdgpu: fix job priority handling" (Christian)
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allow to call amdgpu_ring_priority_get() after pushing the ring to the
scheduler.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add some UTCL registers' golden settings.
Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com>
Tested-by: NKevin Wang <Kevin1.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It was originally introduced following the VESA spec in order to validate PSR.

However we found so many issues around sink_crc that instead of helping PSR
development it only brought another layer of trouble to the table.

So, sink_crc has been a black whole for us in question of time, effort and hope.

First of the problems is that HW statement is clear: "Do not attempt to use
aux communication with PSR enabled". So the main reason behind sink_crc is
already compromised.

For a while we had hope on the aux-mutex could workaround this problem on SKL+
platforms, but that mutex was not reliable, not tested,
and we shouldn't use according to HW engineers.

Also, nor source, nor sink designed and implemented the sink_crc to be used like
we are trying to use here.

Well, the sink side of things is also apparently not prepared for this
case. Each panel that we tried seemed to have a different behavior with same
code and same source.

So, for all the time we lost on trying to ducktape all these different issues
I believe it is now time to move PSR to a more reliable validation.
Maybe not a perfect one as we dreamed for this sink_crc, but at least more
reliable.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705192528.30515-1-rodrigo.vivi@intel.com

Higlights here goes to many PSR fixes and improvements; to the Ice lake work with
power well support and begin of DSI support addition. Also there were many improvements
on execlists and interrupts for minimal latency on command submission; and many fixes
on selftests, mostly caught by our CI.

General driver:
- Clean-up on aux irq (Lucas)
- Mark expected switch fall-through for dealing with static analysis tools (Gustavo)

Gem:
- Different fixes for GuC (Chris, Anusha, Michal)
- Avoid self-relocation BIAS if no relocation (Chris)
- Improve debugging cases in on EINVAL return and vma allocation (Chris)
- Fixes and improvements on context destroying and freeing (Chris)
- Wait for engines to idle before retiring (Chris)
- Many improvements on execlists and interrupts for minimal latency on command submission (Chris)
- Many fixes in selftests, specially on cases highlighted on CI (Chris)
- Other fixes and improvements around GGTT (Chris)
- Prevent background reaping of active objects (Chris)

Display:
- Parallel modeset cleanup to fix driver reset (Chris)
- Get AUX power domain for DP main link (Imre)
- Clean-up on PSR unused func pointers (Rodrigo)
- Many PSR/PSR2 fixes and improvements (DK, Jose, Tarun)
- Add a PSR1 live status (Vathsala)
- Replace old drm_*_{un/reference} with put,get functions (Thomas)
- FBC fixes (Maarten)
- Abstract and document the usage of picking macros (Jani)
- Remove unnecessary check for unsupported modifiers for NV12. (DK)
- Interrupt fixes for display (Ville)
- Clean up on sdvo code (Ville)
- Clean up on current DSI code (Jani)
- Remove support for legacy debugfs crc interface (Maarten)
- Simplify get_encoder_power_domains (Imre)

Icelake:
- MG PLL fixes (Imre)
- Add hw workaround for alpha blending (Vandita)
- Add power well support (Imre)
- Add Interrupt Support (Anusha)
- Start to add support for DSI on Ice Lake (Madhav)
Signed-off-by: NDave Airlie <airlied@redhat.com>

# gpg: Signature made Tue 10 Jul 2018 08:41:37 AM AEST
# gpg:                using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg:                 aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C  E2A3 FA62 5F64 0EEB 13CA
Link: https://patchwork.freedesktop.org/patch/msgid/20180710234349.GA16562@intel.com

Merge branch 'mediatek-drm-next-4.19' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next

This include MT2712 SoC support and removing struct mtk_drm_fb.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531204482.14433.6.camel@mtksdaap41

drm-misc-next for 4.19:

Cross-subsystem Changes:
- many dt-bindings Doc changes

Core Changes:
- Encoder clean ups (Ville Syrjälä)
- Connector Writeback improvements(Boris Brezillon)
- Fake vblank support (Boris Brezillon)
- API for in-kernel clients (Noralf Trønnes)
- improvements to the path of finding panels(Boris Brezillon)

Driver Changes:
- initial support for the virtual display driver - vkms(Haneen Mohammed and Rodrigo Siqueira)
- panel: add Rocktech RK070ER9427 LCD support (Jagan Teki)
- panel: add support for the EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6(Jan Tuerk)
- panel: add DLC DLC0700YZG-1 (Philipp Zabel)
- panel: add support for BOE HV070WSA-100 (Andrzej Hajda)
- panel: add newhaven, nhd-4.3-480272ef-atxl LCD (Tomi Valkeinen)
- panel: add support for Innolux G070Y2-L01 (Christoph Fritz)
- panel: add support for DataImage SCF0700C48GGU18 (Michal Vokáč)
- panel: add support for Sharp LQ035Q7DB03 (Vladimir Zapolskiy)
- panel: p079zca: Refactor panel driver to support multiple panels (Lin Huang)
- sun4i: Add R40 display engine compatible(Jernej Skrabec)
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712011137.GA26620@juma

drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.
Signed-off-by: NAyan Kumar halder <ayan.halder@arm.com>
Reviewed-by: NVille Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-5-git-send-email-ayan.halder@arm.com

drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.
Signed-off-by: NAyan Kumar halder <ayan.halder@arm.com>
Reviewed-by: NVille Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-3-git-send-email-ayan.halder@arm.com

drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.
Signed-off-by: NAyan Kumar halder <ayan.halder@arm.com>
Reviewed-by: NVille Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-2-git-send-email-ayan.halder@arm.com

A lot of drivers duplicate the function to check if a format is yuv or not.
If we add a field (to denote whether the format is yuv or not) in the
drm_format_info table, all the drivers can use this field and it will
prevent duplication of similar logic.
Signed-off-by: NAyan Kumar halder <ayan.halder@arm.com>
Reviewed-by: NVille Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-1-git-send-email-ayan.halder@arm.com

If the driver is wedged, we skip idling the GPU. However, we may still
have a few requests still not retired following the wedging (since they
will be waiting for a background worker trying to acquire struct_mutex).
As we hold the struct_mutex, always do a quick request retirement in
order to flush the wedged path.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107257Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717084121.28185-1-chris@chris-wilson.co.uk

Remove superflous NULL check, fix coding style a bit, shorten error
messages.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Acked-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We can get that from the ring.

v2: squash in "drm/amdgpu: always initialize job->base.sched" (Alex)
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Acked-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add suffix ULL to constant 1000 in order to give the compiler complete
information about the proper arithmetic to use.

Notice that such constant is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:

mode->clock * 1000

Addresses-Coverity-ID: 1466139 ("Unintentional integer overflow")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180704142255.GA8614@embeddedor.com

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717083657.16262-1-tzimmermann@suse.de