This patch fixes alignment issues in code for functions. This is
seen when ran checkpatch.pl -f option on files under net/hsr.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes unnecessary paranthesis from the code. This is
seen when ran checkpatch.pl -f option on files under net/hsr.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes multiple blank lines in the code. This is seen
when ran checkpatch.pl -f option for files under net/hsr
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes lines exceeding 80 characters. This is seen
when ran checkpatch.pl with -f option for files under
net/hsr.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This test is split in two, the first part checks if a report creates a
corresponding mdb entry and if traffic is properly forwarded to it, and
the second part checks if the mdb entry is deleted after a leave and
if traffic is *not* forwarded to it. Since the mcast querier is enabled
we should see standard mcast snooping bridge behaviour.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently mskid is unsigned and hence comparisons with negative
error return values are always false. Fix this by making mskid an
int.

Fixes: f058e468 ("net: hns: fix ICMP6 neighbor solicitation messages discard problem")
Addresses-Coverity: ("Operands don't affect result")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mario Limonciello says:

====================
r8152: Support runtime changes of vendor mac passthu policy

On some platforms ACPI method `\\_SB.AMAC` is dynamic and changes to it can
influence changing the behavior of MAC pass through and what MAC address is used.

When running USB reset, re-read the MAC address to use to support tools that
change the policy.

This is quite similar to using `SIOCSIFHWADDR` except that the actual MAC to use
comes from ASL rather than from userspace.

Changes from v1:
 * Remove an extra unneeded `ether_addr_copy` call
 * Use `dev_set_mac_address` to ensure all notifiers are called
 * Shuffle functions to allow code re-use.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On some platforms it is possible to dynamically change the policy
of what MAC address is selected from the ASL at runtime.

These tools will reset the USB device and expect the change to be
made immediately.
Signed-off-by: NMario Limonciello <mario.limonciello@dell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This already happens later on in `rtl8152_set_mac_address`
Signed-off-by: NMario Limonciello <mario.limonciello@dell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The non-null check on tskb is always false because it is in an else
path of a check on tskb and hence tskb is null in this code block.
This is check is therefore redundant and can be removed as well
as the label coalesc.

if (tsbk) {
        ...
} else {
        ...
        if (unlikely(!skb)) {
                if (tskb)       /* can never be true, redundant code */
                        goto coalesc;
                return;
        }
}

Addresses-Coverity: ("Logically dead code")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jerome Brunet says:

====================
net: phy: add Amlogic g12a support

This patchset adds the necessary bits to support network on the Amlogic
g12a SoC family.

Only the internal PHY and related MDIO mux needed to be addressed.
The GMAC remains compatible with axg SoC family

This series has been tested on the u200 (S905D2) with both the internal
and external (Realtek) PHYs.

Change since v2 [1]:
* Change 'clk part' Reviewed-by as suggested
* Remove default callback from phy drivers
* Use exact match PHY macros
* Default MDIO g12a as module if ARCH_MESON is enabled
* Don't print error on probe defer in the g12a mdio mux

Change since v1 [0]:
* drop '_' from function name unrelated to locking
* fix peripheral clock disable on error
* fix variable declaration reverse Xmas trees
* fix Kconfig dependency on CCF
  (Actually needed for 'struct clk_hw', Thx Andrew !)
* Minor fix in the DT exemple as reported by Rob

[0] https://lkml.kernel.org/r/20190314140135.19184-1-jbrunet@baylibre.com
[1] https://lkml.kernel.org/r/20190329141512.29867-1-jbrunet@baylibre.com
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The purpose of this change is to align the gxl and g12a driver
declaration.

Like on the g12a variant, remove genphy_aneg_done() from the driver
declaration as the net phy framework will default to it anyway.

Also, the gxl phy id should be an exact match as well, so let's change
this and use the macro provided.
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The g12a SoC family uses the type of internal PHY that was used on the
gxl family. The quirks of gxl family, like the LPA register corruption,
appear to have been resolved on this new SoC generation.
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the mdio mux and internal phy glue of the g12a SoC family

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # clk parts
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add documentation for the device tree bindings of the MDIO mux of Amlogic
g12a SoC family
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This header is not in use - remove it.
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In contrast to switching rx irq coalescing off what fixed an issue,
switching tx irq coalescing off is merely a latency optimization,
therefore net-next. As part of this change:

- Remove INTT_0 .. INTT_3 constants, they aren't used.

- Remove comment in rtl_hw_start_8169(), we now have a detailed
  description by the code in rtl_set_coalesce().

- Due to switching irq coalescing off per default we don't need the
  initialization in rtl_hw_start_8168(). If ethtool is used to switch
  on coalescing then rtl_set_coalesce() will configure this register.

For the sake of completeness: This patch just changes the default.
Users still have the option to configure irq coalescing via ethtool.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Minor comment merge conflict in mlx5.

Staging driver has a fixup due to the skb->xmit_more changes
in 'net-next', but was removed in 'net'.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull mm/compaction fixes from Mel Gorman:
 "The merge window for 5.1 introduced a number of compaction-related
  patches. with intermittent reports of corruption and functional
  issues. The bugs are due to sloopy checking of zone boundaries and a
  corner case where invalid indexes are used to access the free lists.

  Reports are not common but at least two users and 0-day have tripped
  over them. There is a chance that one of the syzbot reports are
  related but it has not been confirmed properly.

  The normal submission path is with Andrew but there have been some
  delays and I consider them urgent enough that they should be picked up
  before RC4 to avoid duplicate reports.

  All of these have been successfully tested on older RC windows. This
  will make this branch look like a rebase but in fact, they've simply
  been lifted again from Andrew's tree and placed on a fresh branch.
  I've no reason to believe that this has invalidated the testing given
  the lack of change in compaction and the nature of the fixes"

* tag 'mm-compaction-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux:
  mm/compaction.c: abort search if isolation fails
  mm/compaction.c: correct zone boundary handling when resetting pageblock skip hints

The n_r3964 line discipline driver was written in a different time, when
SMP machines were rare, and users were trusted to do the right thing.
Since then, the world has moved on but not this code, it has stayed
rooted in the past with its lovely hand-crafted list structures and
loads of "interesting" race conditions all over the place.

After attempting to clean up most of the issues, I just gave up and am
now marking the driver as BROKEN so that hopefully someone who has this
hardware will show up out of the woodwork (I know you are out there!)
and will help with debugging a raft of changes that I had laying around
for the code, but was too afraid to commit as odds are they would break
things.

Many thanks to Jann and Linus for pointing out the initial problems in
this codebase, as well as many reviews of my attempts to fix the issues.
It was a case of whack-a-mole, and as you can see, the mole won.
Reported-by: NJann Horn <jannh@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull drm fixes from Dave Airlie:
 "Pretty quiet week, just some amdgpu and i915 fixes.

  i915:
   - deadlock fix
   - gvt fixes

  amdgpu:
   - PCIE dpm feature fix
   - Powerplay fixes"

* tag 'drm-fixes-2019-04-05' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/gvt: Fix kerneldoc typo for intel_vgpu_emulate_hotplug
  drm/i915/gvt: Correct the calculation of plane size
  drm/amdgpu: remove unnecessary rlc reset function on gfx9
  drm/i915: Always backoff after a drm_modeset_lock() deadlock
  drm/i915/gvt: do not let pin count of shadow mm go negative
  drm/i915/gvt: do not deliver a workload if its creation fails
  drm/amd/display: VBIOS can't be light up HDMI when restart system
  drm/amd/powerplay: fix possible hang with 3+ 4K monitors
  drm/amd/powerplay: correct data type to avoid overflow
  drm/amd/powerplay: add ECC feature bit
  drm/amd/amdgpu: fix PCIe dpm feature issue (v3)

Pull networking fixes from David Miller:

 1) Several hash table refcount fixes in batman-adv, from Sven
    Eckelmann.

 2) Use after free in bpf_evict_inode(), from Daniel Borkmann.

 3) Fix mdio bus registration in ixgbe, from Ivan Vecera.

 4) Unbounded loop in __skb_try_recv_datagram(), from Paolo Abeni.

 5) ila rhashtable corruption fix from Herbert Xu.

 6) Don't allow upper-devices to be added to vrf devices, from Sabrina
    Dubroca.

 7) Add qmi_wwan device ID for Olicard 600, from Bjørn Mork.

 8) Don't leave skb->next poisoned in __netif_receive_skb_list_ptype,
    from Alexander Lobakin.

 9) Missing IDR checks in mlx5 driver, from Aditya Pakki.

10) Fix false connection termination in ktls, from Jakub Kicinski.

11) Work around some ASPM issues with r8169 by disabling rx interrupt
    coalescing on certain chips. From Heiner Kallweit.

12) Properly use per-cpu qstat values on NOLOCK qdiscs, from Paolo
    Abeni.

13) Fully initialize sockaddr_in structures in SCTP, from Xin Long.

14) Various BPF flow dissector fixes from Stanislav Fomichev.

15) Divide by zero in act_sample, from Davide Caratti.

16) Fix bridging multicast regression introduced by rhashtable
    conversion, from Nikolay Aleksandrov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
  ibmvnic: Fix completion structure initialization
  ipv6: sit: reset ip header pointer in ipip6_rcv
  net: bridge: always clear mcast matching struct on reports and leaves
  libcxgb: fix incorrect ppmax calculation
  vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x
  sch_cake: Make sure we can write the IP header before changing DSCP bits
  sch_cake: Use tc_skb_protocol() helper for getting packet protocol
  tcp: Ensure DCTCP reacts to losses
  net/sched: act_sample: fix divide by zero in the traffic path
  net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stop
  net: hns: Fix sparse: some warnings in HNS drivers
  net: hns: Fix WARNING when remove HNS driver with SMMU enabled
  net: hns: fix ICMP6 neighbor solicitation messages discard problem
  net: hns: Fix probabilistic memory overwrite when HNS driver initialized
  net: hns: Use NAPI_POLL_WEIGHT for hns driver
  net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()
  flow_dissector: rst'ify documentation
  ipv6: Fix dangling pointer when ipv6 fragment
  net-gro: Fix GRO flush when receiving a GSO packet.
  flow_dissector: document BPF flow dissector environment
  ...

Fix device initialization completion handling for vNIC adapters.
Initialize the completion structure on probe and reinitialize when needed.
This also fixes a race condition during kdump where the driver can attempt
to access the completion struct before it is initialized:

Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc0000000081acbe0
Oops: Kernel access of bad area, sig: 11 [#1]
LE SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: ibmvnic(+) ibmveth sunrpc overlay squashfs loop
CPU: 19 PID: 301 Comm: systemd-udevd Not tainted 4.18.0-64.el8.ppc64le #1
NIP:  c0000000081acbe0 LR: c0000000081ad964 CTR: c0000000081ad900
REGS: c000000027f3f990 TRAP: 0300   Not tainted  (4.18.0-64.el8.ppc64le)
MSR:  800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228288  XER: 00000006
CFAR: c000000008008934 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1
GPR00: c0000000081ad964 c000000027f3fc10 c0000000095b5800 c0000000221b4e58
GPR04: 0000000000000003 0000000000000001 000049a086918581 00000000000000d4
GPR08: 0000000000000007 0000000000000000 ffffffffffffffe8 d0000000014dde28
GPR12: c0000000081ad900 c000000009a00c00 0000000000000001 0000000000000100
GPR16: 0000000000000038 0000000000000007 c0000000095e2230 0000000000000006
GPR20: 0000000000400140 0000000000000001 c00000000910c880 0000000000000000
GPR24: 0000000000000000 0000000000000006 0000000000000000 0000000000000003
GPR28: 0000000000000001 0000000000000001 c0000000221b4e60 c0000000221b4e58
NIP [c0000000081acbe0] __wake_up_locked+0x50/0x100
LR [c0000000081ad964] complete+0x64/0xa0
Call Trace:
[c000000027f3fc10] [c000000027f3fc60] 0xc000000027f3fc60 (unreliable)
[c000000027f3fc60] [c0000000081ad964] complete+0x64/0xa0
[c000000027f3fca0] [d0000000014dad58] ibmvnic_handle_crq+0xce0/0x1160 [ibmvnic]
[c000000027f3fd50] [d0000000014db270] ibmvnic_tasklet+0x98/0x130 [ibmvnic]
[c000000027f3fda0] [c00000000813f334] tasklet_action_common.isra.3+0xc4/0x1a0
[c000000027f3fe00] [c000000008cd13f4] __do_softirq+0x164/0x400
[c000000027f3fef0] [c00000000813ed64] irq_exit+0x184/0x1c0
[c000000027f3ff20] [c0000000080188e8] __do_irq+0xb8/0x210
[c000000027f3ff90] [c00000000802d0a4] call_do_irq+0x14/0x24
[c000000026a5b010] [c000000008018adc] do_IRQ+0x9c/0x130
[c000000026a5b060] [c000000008008ce4] hardware_interrupt_common+0x114/0x120
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipip6 tunnels run iptunnel_pull_header on received skbs. This can
determine the following use-after-free accessing iph pointer since
the packet will be 'uncloned' running pskb_expand_head if it is a
cloned gso skb (e.g if the packet has been sent though a veth device)

[  706.369655] BUG: KASAN: use-after-free in ipip6_rcv+0x1678/0x16e0 [sit]
[  706.449056] Read of size 1 at addr ffffe01b6bd855f5 by task ksoftirqd/1/=
[  706.669494] Hardware name: HPE ProLiant m400 Server/ProLiant m400 Server, BIOS U02 08/19/2016
[  706.771839] Call trace:
[  706.801159]  dump_backtrace+0x0/0x2f8
[  706.845079]  show_stack+0x24/0x30
[  706.884833]  dump_stack+0xe0/0x11c
[  706.925629]  print_address_description+0x68/0x260
[  706.982070]  kasan_report+0x178/0x340
[  707.025995]  __asan_report_load1_noabort+0x30/0x40
[  707.083481]  ipip6_rcv+0x1678/0x16e0 [sit]
[  707.132623]  tunnel64_rcv+0xd4/0x200 [tunnel4]
[  707.185940]  ip_local_deliver_finish+0x3b8/0x988
[  707.241338]  ip_local_deliver+0x144/0x470
[  707.289436]  ip_rcv_finish+0x43c/0x14b0
[  707.335447]  ip_rcv+0x628/0x1138
[  707.374151]  __netif_receive_skb_core+0x1670/0x2600
[  707.432680]  __netif_receive_skb+0x28/0x190
[  707.482859]  process_backlog+0x1d0/0x610
[  707.529913]  net_rx_action+0x37c/0xf68
[  707.574882]  __do_softirq+0x288/0x1018
[  707.619852]  run_ksoftirqd+0x70/0xa8
[  707.662734]  smpboot_thread_fn+0x3a4/0x9e8
[  707.711875]  kthread+0x2c8/0x350
[  707.750583]  ret_from_fork+0x10/0x18

[  707.811302] Allocated by task 16982:
[  707.854182]  kasan_kmalloc.part.1+0x40/0x108
[  707.905405]  kasan_kmalloc+0xb4/0xc8
[  707.948291]  kasan_slab_alloc+0x14/0x20
[  707.994309]  __kmalloc_node_track_caller+0x158/0x5e0
[  708.053902]  __kmalloc_reserve.isra.8+0x54/0xe0
[  708.108280]  __alloc_skb+0xd8/0x400
[  708.150139]  sk_stream_alloc_skb+0xa4/0x638
[  708.200346]  tcp_sendmsg_locked+0x818/0x2b90
[  708.251581]  tcp_sendmsg+0x40/0x60
[  708.292376]  inet_sendmsg+0xf0/0x520
[  708.335259]  sock_sendmsg+0xac/0xf8
[  708.377096]  sock_write_iter+0x1c0/0x2c0
[  708.424154]  new_sync_write+0x358/0x4a8
[  708.470162]  __vfs_write+0xc4/0xf8
[  708.510950]  vfs_write+0x12c/0x3d0
[  708.551739]  ksys_write+0xcc/0x178
[  708.592533]  __arm64_sys_write+0x70/0xa0
[  708.639593]  el0_svc_handler+0x13c/0x298
[  708.686646]  el0_svc+0x8/0xc

[  708.739019] Freed by task 17:
[  708.774597]  __kasan_slab_free+0x114/0x228
[  708.823736]  kasan_slab_free+0x10/0x18
[  708.868703]  kfree+0x100/0x3d8
[  708.905320]  skb_free_head+0x7c/0x98
[  708.948204]  skb_release_data+0x320/0x490
[  708.996301]  pskb_expand_head+0x60c/0x970
[  709.044399]  __iptunnel_pull_header+0x3b8/0x5d0
[  709.098770]  ipip6_rcv+0x41c/0x16e0 [sit]
[  709.146873]  tunnel64_rcv+0xd4/0x200 [tunnel4]
[  709.200195]  ip_local_deliver_finish+0x3b8/0x988
[  709.255596]  ip_local_deliver+0x144/0x470
[  709.303692]  ip_rcv_finish+0x43c/0x14b0
[  709.349705]  ip_rcv+0x628/0x1138
[  709.388413]  __netif_receive_skb_core+0x1670/0x2600
[  709.446943]  __netif_receive_skb+0x28/0x190
[  709.497120]  process_backlog+0x1d0/0x610
[  709.544169]  net_rx_action+0x37c/0xf68
[  709.589131]  __do_softirq+0x288/0x1018

[  709.651938] The buggy address belongs to the object at ffffe01b6bd85580
                which belongs to the cache kmalloc-1024 of size 1024
[  709.804356] The buggy address is located 117 bytes inside of
                1024-byte region [ffffe01b6bd85580, ffffe01b6bd85980)
[  709.946340] The buggy address belongs to the page:
[  710.003824] page:ffff7ff806daf600 count:1 mapcount:0 mapping:ffffe01c4001f600 index:0x0
[  710.099914] flags: 0xfffff8000000100(slab)
[  710.149059] raw: 0fffff8000000100 dead000000000100 dead000000000200 ffffe01c4001f600
[  710.242011] raw: 0000000000000000 0000000000380038 00000001ffffffff 0000000000000000
[  710.334966] page dumped because: kasan: bad access detected

Fix it resetting iph pointer after iptunnel_pull_header

Fixes: a09a4c8d ("tunnels: Remove encapsulation offloads on decap")
Tested-by: NJianlin Shi <jishi@redhat.com>
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tuong Lien says:

====================
tipc: improve TIPC unicast link throughput

The series introduces an algorithm to improve TIPC throughput especially
in terms of packet loss, also tries to reduce packet duplication due to
overactive NACK sending mechanism.

The link failover situation is also covered by the patches.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 0ae955e2656d ("tipc: improve TIPC throughput by Gap ACK
blocks"), we enhance the link transmq by releasing as many packets as
possible with the multi-ACKs from peer node. This also means the queue
is now non-linear and the peer link deferdq becomes vital.

Whereas, in the case of link failover, all messages in the link transmq
need to be transmitted as tunnel messages in such a way that message
sequentiality and cardinality per sender is preserved. This requires us
to maintain the link deferdq somehow, so that when the tunnel messages
arrive, the inner user messages along with the ones in the deferdq will
be delivered to upper layer correctly.

The commit accomplishes this by defining a new queue in the TIPC link
structure to hold the old link deferdq when link failover happens and
process it upon receipt of tunnel messages.

Also, in the case of link syncing, the link deferdq will not be purged
to avoid unnecessary retransmissions that in the worst case will fail
because the packets might have been freed on the sending side.
Acked-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NTuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For unicast transmission, the current NACK sending althorithm is over-
active that forces the sending side to retransmit a packet that is not
really lost but just arrived at the receiving side with some delay, or
even retransmit same packets that have already been retransmitted
before. As a result, many duplicates are observed also under normal
condition, ie. without packet loss.

One example case is: node1 transmits 1 2 3 4 10 5 6 7 8 9, when node2
receives packet #10, it puts into the deferdq. When the packet #5 comes
it sends NACK with gap [6 - 9]. However, shortly after that, when
packet #6 arrives, it pulls out packet #10 from the deferfq, but it is
still out of order, so it makes another NACK with gap [7 - 9] and so on
... Finally, node1 has to retransmit the packets 5 6 7 8 9 a number of
times, but in fact all the packets are not lost at all, so duplicates!

This commit reduces duplicates by changing the condition to send NACK,
also restricting the retransmissions on individual packets via a timer
of about 1ms. However, it also needs to say that too tricky condition
for NACKs or too long timeout value for retransmissions will result in
performance reducing! The criterias in this commit are found to be
effective for both the requirements to reduce duplicates but not affect
performance.

The tipc_link_rcv() is also improved to only dequeue skb from the link
deferdq if it is expected (ie. its seqno <= rcv_nxt).
Acked-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NTuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During unicast link transmission, it's observed very often that because
of one or a few lost/dis-ordered packets, the sending side will fastly
reach the send window limit and must wait for the packets to be arrived
at the receiving side or in the worst case, a retransmission must be
done first. The sending side cannot release a lot of subsequent packets
in its transmq even though all of them might have already been received
by the receiving side.
That is, one or two packets dis-ordered/lost and dozens of packets have
to wait, this obviously reduces the overall throughput!

This commit introduces an algorithm to overcome this by using "Gap ACK
blocks". Basically, a Gap ACK block will consist of <ack, gap> numbers
that describes the link deferdq where packets have been got by the
receiving side but with gaps, for example:

      link deferdq: [1 2 3 4      10 11      13 14 15       20]
--> Gap ACK blocks:       <4, 5>,   <11, 1>,      <15, 4>, <20, 0>

The Gap ACK blocks will be sent to the sending side along with the
traditional ACK or NACK message. Immediately when receiving the message
the sending side will now not only release from its transmq the packets
ack-ed by the ACK but also by the Gap ACK blocks! So, more packets can
be enqueued and transmitted.
In addition, the sending side can now do "multi-retransmissions"
according to the Gaps reported in the Gap ACK blocks.

The new algorithm as verified helps greatly improve the TIPC throughput
especially under packet loss condition.

So far, a maximum of 32 blocks is quite enough without any "Too few Gap
ACK blocks" reports with a 5.0% packet loss rate, however this number
can be increased in the furture if needed.

Also, the patch is backward compatible.
Acked-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NTuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'riscv-for-linus-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V fixes from Palmer Dabbelt:
 "I dropped the ball a bit here: these patches should all probably have
  been part of rc2, but I wanted to get around to properly testing them
  in the various configurations (qemu32, qeum64, unleashed) first.

  Unfortunately I've been traveling and didn't have time to actually do
  that, but since these fix concrete bugs and pass my old set of tests I
  don't want to delay the fixes any longer.

  There are four independent fixes here:

   - A fix for the rv32 port that corrects the 64-bit user accesor's
     fixup label address.

   - A fix for a regression introduced during the merge window that
     broke medlow configurations at run time. This patch also includes a
     fix that disables ftrace for the same set of functions, which was
     found by inspection at the same time.

   - A modification of the memory map to avoid overlapping the FIXMAP
     and VMALLOC regions on systems with small memory maps.

   - A fix to the module handling code to use the correct syntax for
     probing Kconfig entries.

  These have passed my standard test flow, but I didn't have time to
  expand that testing like I said I would"

* tag 'riscv-for-linus-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: Use IS_ENABLED(CONFIG_CMODEL_MEDLOW)
  RISC-V: Fix FIXMAP_TOP to avoid overlap with VMALLOC area
  RISC-V: Always compile mm/init.c with cmodel=medany and notrace
  riscv: fix accessing 8-byte variable from RV32

Heiner Kallweit says:

====================
net: phy: use generic PHY ability readers if callback get_features isn't set

Meanwhile we have generic functions for reading the abilities of
Clause 22 / 45 PHY's. This allows to use them as fallback in case
callback get_features isn't set. Benefit is the reduction of
boilerplate code in PHY drivers.

v2:
- adjust a comment in patch 1 to match the code
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that phylib uses genphy_read_abilities() as fallback, we don't have
to set callback get_features any longer.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Meanwhile we have generic functions for reading the abilities of
Clause 22 / 45 PHY's. This allows to use them as fallback in case
callback get_features isn't set. Benefit is the reduction of
boilerplate code in PHY drivers.

v2:
- adjust the comment in phy_driver_register to match the code
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the mcast conversion to rhashtable this function has been unused, so
remove it.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to be careful and always zero the whole br_ip struct when it is
used for matching since the rhashtable change. This patch fixes all the
places which didn't properly clear it which in turn might've caused
mismatches.

Thanks for the great bug report with reproducing steps and bisection.

Steps to reproduce (from the bug report):
ip link add br0 type bridge mcast_querier 1
ip link set br0 up

ip link add v2 type veth peer name v3
ip link set v2 master br0
ip link set v2 up
ip link set v3 up
ip addr add 3.0.0.2/24 dev v3

ip netns add test
ip link add v1 type veth peer name v1 netns test
ip link set v1 master br0
ip link set v1 up
ip -n test link set v1 up
ip -n test addr add 3.0.0.1/24 dev v1

# Multicast receiver
ip netns exec test socat
UDP4-RECVFROM:5588,ip-add-membership=224.224.224.224:3.0.0.1,fork -

# Multicast sender
echo hello | nc -u -s 3.0.0.2 224.224.224.224 5588

Reported-by: liam.mcbirnie@boeing.com
Fixes: 19e3a9c9 ("net: bridge: convert multicast to generic rhashtable")
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull power management fixes from Rafael Wysocki:
 "These fix up the intel_pstate driver after recent changes to prevent
  it from printing pointless messages and update the turbostat utility
  (mostly fixes and new hardware support).

  Specifics:

   - Make intel_pstate only load on Intel processors and prevent it from
     printing pointless failure messages (Borislav Petkov).

   - Update the turbostat utility:
      * Assorted fixes (Ben Hutchings, Len Brown, Prarit Bhargava).
      * Support for AMD Fam 17h (Zen) RAPL and package power (Calvin
        Walton).
      * Support for Intel Icelake and for systems with more than one die
        per package (Len Brown).
      * Cleanups (Len Brown)"

* tag 'pm-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq/intel_pstate: Load only on Intel hardware
  tools/power turbostat: update version number
  tools/power turbostat: Warn on bad ACPI LPIT data
  tools/power turbostat: Add checks for failure of fgets() and fscanf()
  tools/power turbostat: Also read package power on AMD F17h (Zen)
  tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL
  tools/power turbostat: Do not display an error on systems without a cpufreq driver
  tools/power turbostat: Add Die column
  tools/power turbostat: Add Icelake support
  tools/power turbostat: Cleanup CNL-specific code
  tools/power turbostat: Cleanup CC3-skip code
  tools/power turbostat: Restore ability to execute in topology-order

Pull ACPI fix from Rafael Wysocki:
 "Prevent stale GPE events from triggering spurious system wakeups from
  suspend-to-idle (Furquan Shaikh)"

* tag 'acpi-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Clear status of GPEs before enabling them

This reverts commit 6578229d.
netif_receive_skb_list() doesn't support GRO, therefore we may have
scenarios with decreased performance. See discussion here [0].

[0] https://marc.info/?t=155403847400001&r=1&w=2Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'drm-intel-fixes-2019-04-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

Only one fix for DSC (backoff after drm_modeset_lock deadlock)
and GVT's fixes including vGPU display plane size calculation,
shadow mm pin count, error recovery path for workload create
and one kerneldoc fix.
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404161116.GA14522@intel.com

Linux currently disable ECN for incoming connections when the SYN
requests ECN and the IP header has ECT(0)/ECT(1) set, as some
networks were reportedly mangling the ToS byte, hence could later
trigger false congestion notifications.

RFC8311 §4.3 relaxes RFC3168's requirements such that ECT can be set
one TCP control packets (including SYNs). The main benefit of this
is the decreased probability of losing a SYN in a congested
ECN-capable network (i.e., it avoids the initial 1s timeout).
Additionally, this allows the development of newer TCP extensions,
such as AccECN.

This patch relaxes the previous check, by enabling ECN on incoming
connections using SYN+ECT if at least one bit of the reserved flags
of the TCP header is set. Such bit would indicate that the sender of
the SYN is using a newer TCP feature than what the host implements,
such as AccECN, and is thus implementing RFC8311. This enables
end-hosts not supporting such extensions to still negociate ECN, and
to have some of the benefits of using ECN on control packets.
Signed-off-by: NOlivier Tilmans <olivier.tilmans@nokia-bell-labs.com>
Suggested-by: NBob Briscoe <research@bobbriscoe.net>
Cc: Koen De Schepper <koen.de_schepper@nokia-bell-labs.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>