1. 13 9月, 2012 8 次提交
  2. 12 9月, 2012 3 次提交
  3. 11 9月, 2012 13 次提交
    • D
      drm/i915: fix up the IBX transcoder B check · 75c5da27
      Daniel Vetter 提交于
      This has been added in
      
      commit de9a35ab
      Author: Daniel Vetter <daniel.vetter@ffwll.ch>
      Date:   Tue Jun 5 11:03:40 2012 +0200
      
          drm/i915: assert that the IBX port transcoder select w/a is implemented
      
      Unfortunately I've failed to notice that these checks are not just
      called for the port that is about to be disabled, but for all (which
      makes sense for an assert ...), and the WARN missfired when disabling
      another pipe than the one with the dp port.
      
      Hence also check whether the port is actually disabled.
      
      Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54688Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      75c5da27
    • H
      crypto: authenc - Fix crash with zero-length assoc data · 9b2f4cb6
      Herbert Xu 提交于
      The authenc code doesn't deal with zero-length associated data
      correctly and ends up constructing a zero-length sg entry which
      causes a crash when it's fed into the crypto system.
      
      This patch fixes this by avoiding the code-path that triggers
      the SG construction if we have no associated data.
      
      This isn't the most optimal fix as it means that we'll end up
      using the fallback code-path even when we could still execute
      the digest function.  However, this isn't a big deal as nobody
      but the test path would supply zero-length associated data.
      Reported-by: NRomain Francoise <romain@orebokech.com>
      Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      Tested-by: NRomain Francoise <romain@orebokech.com>
      9b2f4cb6
    • J
      kbuild: add symbol prefix arg to kallsyms · 6895f97e
      James Hogan 提交于
      Commit 1f2bfbd0 ("kbuild: link of
      vmlinux moved to a script") introduced in v3.5-rc1 broke kallsyms on
      architectures which have symbol prefixes.
      
      The --symbol-prefix argument used to be added to the KALLSYMS command
      line from the architecture Makefile, however this isn't picked up by the
      new scripts/link-vmlinux.sh. This resulted in symbols like
      kallsyms_addresses being added which weren't correctly overriding the
      weak symbols such as _kallsyms_addresses. These could then trigger
      BUG_ONs in kallsyms code.
      
      This is fixed by removing the KALLSYMS addition from the architecture
      Makefile, and using CONFIG_SYMBOL_PREFIX in the link-vmlinux.sh script
      to determine whether to add the --symbol-prefix argument.
      Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
      Signed-off-by: NBob Liu <lliubbo@gmail.com>
      6895f97e
    • L
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 1a95620f
      Linus Torvalds 提交于
      Pull SCSI fixes from James Bottomley:
       "I had actually prepared this fix set before I left for KS + Plumbers,
        so it's been incubating much longer than it should have.  I'll be
        picking up my three week backlog this week, so more fixes will then be
        forthcoming
      
        This set consist of three minor and one fairly major (the device not
        ready causing offlining problem which is a serious regression
        introduced by the media change update) fixes.
      
        Signed-off-by: James Bottomley <JBottomley@Parallels.com>"
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        [SCSI] Fix 'Device not ready' issue on mpt2sas
        [SCSI] scsi_lib: fix scsi_io_completion's SG_IO error propagation
        [SCSI] megaraid_sas: Move poll_aen_lock initializer
        [SCSI] mpt2sas: Fix for Driver oops, when loading driver with max_queue_depth command line option to a very small value
      1a95620f
    • L
      Merge tag 'kvm-3.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm · ffc29649
      Linus Torvalds 提交于
      Pull KVM updates from Avi Kivity:
       "A trio of KVM fixes: incorrect lookup of guest cpuid, an uninitialized
        variable fix, and error path cleanup fix."
      
      * tag 'kvm-3.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
        KVM: fix error paths for failed gfn_to_page() calls
        KVM: x86: Check INVPCID feature bit in EBX of leaf 7
        KVM: PIC: fix use of uninitialised variable.
      ffc29649
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse · 44346cfe
      Linus Torvalds 提交于
      Pull FUSE fixes from Miklos Szeredi:
       "This contains bugfixes for FUSE and CUSE and a compile warning fix."
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
        fuse: fix retrieve length
        fuse: mark variables uninitialized
        cuse: kill connection on initialization error
        cuse: fix fuse_conn_kill()
      44346cfe
    • L
      Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6 · e9bd8f16
      Linus Torvalds 提交于
      Pull CIFS fixes from Steve French.
      
      * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
        CIFS: Fix endianness conversion
        CIFS: Fix error handling in cifs_push_mandatory_locks
      e9bd8f16
    • L
      Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs · 1b0a9069
      Linus Torvalds 提交于
      Pull UDF and ext3 fixes from Jan Kara:
       "One UDF data corruption fix and one ext3 fix where we didn't write
        everything to disk on fsync in one corner case."
      
      * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
        udf: Fix data corruption for files in ICB
        ext3: Fix fdatasync() for files with only i_size changes
      1b0a9069
    • D
      drm/i915: set the right gen3 flip_done mode also at resume · 974a3b0f
      Daniel Vetter 提交于
      Currently we've only frobbed this bit at irq_init time, but did
      not restore it at resume time. Move it to the gen3 clock gating
      function to fix this.
      
      Notice while reading through code.
      
      Cc: stable@vger.kernel.org (for 3.5 only)
      Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
      Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      974a3b0f
    • L
      Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging · 6562271a
      Linus Torvalds 提交于
      Pull i2c subsystem fixes from Jean Delvare.
      
      * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
        i2c-core: Fix for lockdep validator
        i2c-designware: Fix build error if CONFIG_I2C_DESIGNWARE_PLATFORM=y && CONFIG_I2C_DESIGNWARE_PCI=y
        i2c-i801: Add Device IDs for Intel Lynx Point-LP PCH
      6562271a
    • L
      workqueue: fix possible idle worker depletion across CPU hotplug · ee378aa4
      Lai Jiangshan 提交于
      To simplify both normal and CPU hotplug paths, worker management is
      prevented while CPU hoplug is in progress.  This is achieved by CPU
      hotplug holding the same exclusion mechanism used by workers to ensure
      there's only one manager per pool.
      
      If someone else seems to be performing the manager role, workers
      proceed to execute work items.  CPU hotplug using the same mechanism
      can lead to idle worker depletion because all workers could proceed to
      execute work items while CPU hotplug is in progress and CPU hotplug
      itself wouldn't actually perform the worker management duty - it
      doesn't guarantee that there's an idle worker left when it releases
      management.
      
      This idle worker depletion, under extreme circumstances, can break
      forward-progress guarantee and thus lead to deadlock.
      
      This patch fixes the bug by using separate mechanisms for manager
      exclusion among workers and hotplug exclusion.  For manager exclusion,
      POOL_MANAGING_WORKERS which was restored by the previous patch is
      used.  pool->manager_mutex is now only used for exclusion between the
      elected manager and CPU hotplug.  The elected manager won't proceed
      without holding pool->manager_mutex.
      
      This ensures that the worker which won the manager position can't skip
      managing while CPU hotplug is in progress.  It will block on
      manager_mutex and perform management after CPU hotplug is complete.
      
      Note that hotplug may happen while waiting for manager_mutex.  A
      manager isn't either on idle or busy list and thus the hoplug code
      can't unbind/rebind it.  Make the manager handle its own un/rebinding.
      
      tj: Updated comment and description.
      Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
      Signed-off-by: NTejun Heo <tj@kernel.org>
      ee378aa4
    • L
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · 5d67f2e8
      Linus Torvalds 提交于
      Pull drm fixes from Dave Airlie:
       "Just noticed I hadn't send these out, nothing majorly urgent, I know
        AMD guys have some regression fixes coming soon.
      
        This contains:
         2 nouveau fixes so it loads on the retina MBP systems properly,
         2 vmwgfx fixes to load the driver earlier, and allow distros config it
         1 error->debug fix in ast
        and Keith was playing with 32-on-64 and decided we may as well stick
        the compat ioctl in all the drivers.  It fixes udl for him."
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
        drm/vmwgfx: add MODULE_DEVICE_TABLE so vmwgfx loads at boot
        drm/vmwgfx: allow a kconfig option to choose if fbcon is enabled
        drm: use drm_compat_ioctl for 32-bit apps
        drm/ast: drop debug level on error printk
        drm/nv50-/gpio: initialise to vbios defaults during init
        drm/nvd0/disp: hopefully fix selection of 6/8bpc mode on DP outputs
      5d67f2e8
    • L
      workqueue: restore POOL_MANAGING_WORKERS · 552a37e9
      Lai Jiangshan 提交于
      This patch restores POOL_MANAGING_WORKERS which was replaced by
      pool->manager_mutex by 60373152 "workqueue: use mutex for global_cwq
      manager exclusion".
      
      There's a subtle idle worker depletion bug across CPU hotplug events
      and we need to distinguish an actual manager and CPU hotplug
      preventing management.  POOL_MANAGING_WORKERS will be used for the
      former and manager_mutex the later.
      
      This patch just lays POOL_MANAGING_WORKERS on top of the existing
      manager_mutex and doesn't introduce any synchronization changes.  The
      next patch will update it.
      
      Note that this patch fixes a non-critical anomaly where
      too_many_workers() may return %true spuriously while CPU hotplug is in
      progress.  While the issue could schedule idle timer spuriously, it
      didn't trigger any actual misbehavior.
      
      tj: Rewrote patch description.
      Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
      Signed-off-by: NTejun Heo <tj@kernel.org>
      552a37e9
  4. 10 9月, 2012 4 次提交
    • X
      KVM: fix error paths for failed gfn_to_page() calls · 4484141a
      Xiao Guangrong 提交于
      This bug was triggered:
      [ 4220.198458] BUG: unable to handle kernel paging request at fffffffffffffffe
      [ 4220.203907] IP: [<ffffffff81104d85>] put_page+0xf/0x34
      ......
      [ 4220.237326] Call Trace:
      [ 4220.237361]  [<ffffffffa03830d0>] kvm_arch_destroy_vm+0xf9/0x101 [kvm]
      [ 4220.237382]  [<ffffffffa036fe53>] kvm_put_kvm+0xcc/0x127 [kvm]
      [ 4220.237401]  [<ffffffffa03702bc>] kvm_vcpu_release+0x18/0x1c [kvm]
      [ 4220.237407]  [<ffffffff81145425>] __fput+0x111/0x1ed
      [ 4220.237411]  [<ffffffff8114550f>] ____fput+0xe/0x10
      [ 4220.237418]  [<ffffffff81063511>] task_work_run+0x5d/0x88
      [ 4220.237424]  [<ffffffff8104c3f7>] do_exit+0x2bf/0x7ca
      
      The test case:
      
      	printf(fmt, ##args);		\
      	exit(-1);} while (0)
      
      static int create_vm(void)
      {
      	int sys_fd, vm_fd;
      
      	sys_fd = open("/dev/kvm", O_RDWR);
      	if (sys_fd < 0)
      		die("open /dev/kvm fail.\n");
      
      	vm_fd = ioctl(sys_fd, KVM_CREATE_VM, 0);
      	if (vm_fd < 0)
      		die("KVM_CREATE_VM fail.\n");
      
      	return vm_fd;
      }
      
      static int create_vcpu(int vm_fd)
      {
      	int vcpu_fd;
      
      	vcpu_fd = ioctl(vm_fd, KVM_CREATE_VCPU, 0);
      	if (vcpu_fd < 0)
      		die("KVM_CREATE_VCPU ioctl.\n");
      	printf("Create vcpu.\n");
      	return vcpu_fd;
      }
      
      static void *vcpu_thread(void *arg)
      {
      	int vm_fd = (int)(long)arg;
      
      	create_vcpu(vm_fd);
      	return NULL;
      }
      
      int main(int argc, char *argv[])
      {
      	pthread_t thread;
      	int vm_fd;
      
      	(void)argc;
      	(void)argv;
      
      	vm_fd = create_vm();
      	pthread_create(&thread, NULL, vcpu_thread, (void *)(long)vm_fd);
      	printf("Exit.\n");
      	return 0;
      }
      
      It caused by release kvm->arch.ept_identity_map_addr which is the
      error page.
      
      The parent thread can send KILL signal to the vcpu thread when it was
      exiting which stops faulting pages and potentially allocating memory.
      So gfn_to_pfn/gfn_to_page may fail at this time
      
      Fixed by checking the page before it is used
      Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
      Signed-off-by: NAvi Kivity <avi@redhat.com>
      4484141a
    • J
      i2c-core: Fix for lockdep validator · 390946b1
      Jean Delvare 提交于
      If kernel is compiled with CONFIG_PROVE_LOCKING the
      validator raises an error when a multiplexer is removed
      via sysfs and sub-clients are connected to it. This is a
      false positive.
      Documentation/lockdep-design.txt recommends to handle this
      via calls to mutex_lock_nested().
      
      Based on an earlier fix from Michael Lawnick.
      
      Note that the extra code resolves to nothing unless
      CONFIG_DEBUG_LOCK_ALLOC=y.
      Signed-off-by: NJean Delvare <khali@linux-fr.org>
      Cc: Michael Lawnick <ml.lawnick@gmx.de>
      390946b1
    • A
      i2c-designware: Fix build error if CONFIG_I2C_DESIGNWARE_PLATFORM=y && CONFIG_I2C_DESIGNWARE_PCI=y · e68bb91b
      Axel Lin 提交于
      This patch adds config I2C_DESIGNWARE_CORE in Kconfig, and let
      I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_PCI select I2C_DESIGNWARE_CORE.
      
      Because both I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_PCI can be built as
      built-in or module, we also need to export the functions in i2c-designware-core.
      
      This fixes below build error when CONFIG_I2C_DESIGNWARE_PLATFORM=y &&
      CONFIG_I2C_DESIGNWARE_PCI=y:
      
        LD      drivers/i2c/busses/built-in.o
      drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_clear_int':
      i2c-designware-core.c:(.text+0xa10): multiple definition of `i2c_dw_clear_int'
      drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x928): first defined here
      drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_init':
      i2c-designware-core.c:(.text+0x178): multiple definition of `i2c_dw_init'
      drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x90): first defined here
      drivers/i2c/busses/i2c-designware-pci.o: In function `dw_readl':
      i2c-designware-core.c:(.text+0xe8): multiple definition of `dw_readl'
      drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x0): first defined here
      drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_isr':
      i2c-designware-core.c:(.text+0x724): multiple definition of `i2c_dw_isr'
      drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x63c): first defined here
      drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_xfer':
      i2c-designware-core.c:(.text+0x4b0): multiple definition of `i2c_dw_xfer'
      drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x3c8): first defined here
      drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_is_enabled':
      i2c-designware-core.c:(.text+0x9d4): multiple definition of `i2c_dw_is_enabled'
      drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8ec): first defined here
      drivers/i2c/busses/i2c-designware-pci.o: In function `dw_writel':
      i2c-designware-core.c:(.text+0x124): multiple definition of `dw_writel'
      drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x3c): first defined here
      drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_xfer_msg':
      i2c-designware-core.c:(.text+0x2e8): multiple definition of `i2c_dw_xfer_msg'
      drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x200): first defined here
      drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_enable':
      i2c-designware-core.c:(.text+0x9c8): multiple definition of `i2c_dw_enable'
      drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8e0): first defined here
      drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_read_comp_param':
      i2c-designware-core.c:(.text+0xa24): multiple definition of `i2c_dw_read_comp_param'
      drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x93c): first defined here
      drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_disable':
      i2c-designware-core.c:(.text+0x9dc): multiple definition of `i2c_dw_disable'
      drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8f4): first defined here
      drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_func':
      i2c-designware-core.c:(.text+0x710): multiple definition of `i2c_dw_func'
      drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x628): first defined here
      drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_disable_int':
      i2c-designware-core.c:(.text+0xa18): multiple definition of `i2c_dw_disable_int'
      drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x930): first defined here
      make[3]: *** [drivers/i2c/busses/built-in.o] Error 1
      make[2]: *** [drivers/i2c/busses] Error 2
      make[1]: *** [drivers/i2c] Error 2
      make: *** [drivers] Error 2
      Signed-off-by: NAxel Lin <axel.lin@gmail.com>
      Signed-off-by: NJean Delvare <khali@linux-fr.org>
      Tested-by: NJiri Slaby <jslaby@suse.cz>
      Cc: stable@vger.kernel.org [3.2+]
      e68bb91b
    • J
      i2c-i801: Add Device IDs for Intel Lynx Point-LP PCH · 4a8f1ddd
      James Ralston 提交于
      Add the SMBus Device IDs for the Intel Lynx Point-LP PCH.
      Signed-off-by: NJames Ralston <james.d.ralston@intel.com>
      Signed-off-by: NJean Delvare <khali@linux-fr.org>
      4a8f1ddd
  5. 09 9月, 2012 5 次提交
  6. 08 9月, 2012 1 次提交
  7. 07 9月, 2012 6 次提交