qeth_l3_send_ipa_arp_cmd() is merely a wrapper around
qeth_send_control_data() now. So push the length adjustment into
QETH_SETASS_BASE_LEN, and remove the wrapper. While at it, also remove
some redundant 0-initializations.

qeth_send_setassparms() requires that callers prepare their command
parameters, so that they can be copied into the parameter area in one
go. Skip the indirection, and just let callers set up the command
themselves.
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Call qeth_prepare_ipa_cmd() during setup of a new IPA cmd buffer, so
that it is used for all commands. Thus ARP and SNMP requests don't have
to do their own initialization.

This will now also set the proper MPC protocol version for SNMP requests
on L2 devices.
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Re-implement the card-by-RDEV lookup by using device model concepts, and
remove the now redundant list of all qeth card instances in the system.
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 82bf5c08 ("s390/qeth: add support for IPv6 TSO"),
qeth_xmit() also knows how to build TSO packets and is practically
identical to qeth_l3_xmit().
Convert qeth_l3_xmit() into a thin wrapper that merely strips the
L2 header off a packet, and calls qeth_xmit() for the actual
TX processing.
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Filling the HW header from one single function will make it easier to
rip out all the duplicated transmit code in qeth_l3_xmit(). On top, this
saves one conditional branch in the TSO path.
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

By default, READ MAC on a Layer2 OSD device returns the adapter's
burnt-in MAC address. Given the default scenario of many virtual devices
on the same adapter, qeth can't make any use of this address and
therefore skips the READ MAC call for this device type.

But in some configurations, the READ MAC command for a Layer2 OSD device
actually returns a pre-provisioned, virtual MAC address. So enable the
READ MAC code to detect this situation, and let the L2 subdriver
call READ MAC for OSD devices.

This also removes the QETH_LAYER2_MAC_READ flag, which protects L2
devices against calling READ MAC multiple times. Instead protect the
whole call to qeth_l2_request_initial_mac().
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

if local is NULL pointer, and the following access of local's
dev will trigger panic, which is same as BUG_ON
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stefano Brivio says:

====================
ICMP error handling for UDP tunnels

This series introduces ICMP error handling for UDP tunnels and
encapsulations and related selftests. We need to handle ICMP errors to
support PMTU discovery and route redirection -- this support is entirely
missing right now:

- patch 1/11 adds a socket lookup for UDP tunnels that use, by design,
  the same destination port on both endpoints -- i.e. VXLAN and GENEVE
- patches 2/11 to 7/11 are specific to VxLAN and GENEVE
- patches 8/11 and 9/11 add infrastructure for lookup of encapsulations
  where sent packets cannot be matched via receiving socket lookup, i.e.
  FoU and GUE
- patches 10/11 and 11/11 are specific to FoU and GUE

v2: changes are listed in the single patches
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce eight tests, for FoU and GUE, with IPv4 and IPv6 payload,
on IPv4 and IPv6 transport, that check that PMTU exceptions are created
with the right value when exceeding the MTU on a link of the path.
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As the destination port in FoU and GUE receiving sockets doesn't
necessarily match the remote destination port, we can't associate errors
to the encapsulating tunnels with a socket lookup -- we need to blindly
try them instead. This means we don't even know if we are handling errors
for FoU or GUE without digging into the packets.

Hence, implement a single handler for both, one for IPv4 and one for IPv6,
that will check whether the packet that generated the ICMP error used a
direct IP encapsulation or if it had a GUE header, and send the error to
the matching protocol handler, if any.
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ICMP error handling is currently not possible for UDP tunnels not
employing a receiving socket with local destination port matching the
remote one, because we have no way to look them up.

Add an err_handler tunnel encapsulation operation that can be exported by
tunnels in order to pass the error to the protocol implementing the
encapsulation. We can't easily use a lookup function as we did for VXLAN
and GENEVE, as protocol error handlers, which would be in turn called by
implementations of this new operation, handle the errors themselves,
together with the tunnel lookup.

Without a socket, we can't be sure which encapsulation error handler is
the appropriate one: encapsulation handlers (the ones for FoU and GUE
introduced in the next patch, e.g.) will need to check the new error codes
returned by protocol handlers to figure out if errors match the given
encapsulation, and, in turn, report this error back, so that we can try
all of them in __udp{4,6}_lib_err_encap_no_sk() until we have a match.

v2:
- Name all arguments in err_handler prototypes (David Miller)
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We'll need this to handle ICMP errors for tunnels without a sending socket
(i.e. FoU and GUE). There, we might have to look up different types of IP
tunnels, registered as network protocols, before we get a match, so we
want this for the error handlers of IPPROTO_IPIP and IPPROTO_IPV6 in both
inet_protos and inet6_protos. These error codes will be used in the next
patch.

For consistency, return sensible error codes in protocol error handlers
whenever handlers can't handle errors because, even if valid, they don't
match a protocol or any of its states.

This has no effect on existing error handling paths.
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use a router between endpoints, implemented via namespaces, set a low MTU
between router and destination endpoint, exceed it and check PMTU value in
route exceptions.

v2:
- Introduce IPv4 tests right away, if iproute2 doesn't support the 'df'
  link option they will be skipped (David Ahern)
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

draft-ietf-nvo3-geneve-08 says:

   It is strongly RECOMMENDED that Path MTU Discovery ([RFC1191],
   [RFC1981]) be used by setting the DF bit in the IP header when Geneve
   packets are transmitted over IPv4 (this is the default with IPv6).

Now that ICMP error handling is working for GENEVE, we can comply with
this recommendation.

Make this configurable, though, to avoid breaking existing setups. By
default, DF won't be set. It can be set or inherited from inner IPv4
packets. If it's configured to be inherited and we are encapsulating IPv6,
it will be set.

This only applies to non-lwt tunnels: if an external control plane is
used, tunnel key will still control the DF flag.

v2:
- DF behaviour configuration only applies for non-lwt tunnels, apply DF
  setting only if (!geneve->collect_md) in geneve_xmit_skb()
  (Stephen Hemminger)
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Export an encap_err_lookup() operation to match an ICMP error against a
valid VNI.
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use a router between endpoints, implemented via namespaces, set a low MTU
between router and destination endpoint, exceed it and check PMTU value in
route exceptions.

v2:
- Change all occurrences of VxLAN to VXLAN (Jiri Benc)
- Introduce IPv4 tests right away, if iproute2 doesn't support the 'df'
  link option they will be skipped (David Ahern)
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow users to set the IPv4 DF bit in outgoing packets, or to inherit its
value from the IPv4 inner header. If the encapsulated protocol is IPv6 and
DF is configured to be inherited, always set it.

For IPv4, inheriting DF from the inner header was probably intended from
the very beginning judging by the comment to vxlan_xmit(), but it wasn't
actually implemented -- also because it would have done more harm than
good, without handling for ICMP Fragmentation Needed messages.

According to RFC 7348, "Path MTU discovery MAY be used". An expired RFC
draft, draft-saum-nvo3-pmtud-over-vxlan-05, whose purpose was to describe
PMTUD implementation, says that "is a MUST that Vxlan gateways [...]
SHOULD set the DF-bit [...]", whatever that means.

Given this background, the only sane option is probably to let the user
decide, and keep the current behaviour as default.

This only applies to non-lwt tunnels: if an external control plane is
used, tunnel key will still control the DF flag.

v2:
- DF behaviour configuration only applies for non-lwt tunnels, move DF
  setting to if (!info) block in vxlan_xmit_one() (Stephen Hemminger)
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Export an encap_err_lookup() operation to match an ICMP error against a
valid VNI.
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For both IPv4 and IPv6, if we can't match errors to a socket, try
tunnels before ignoring them. Look up a socket with the original source
and destination ports as found in the UDP packet inside the ICMP payload,
this will work for tunnels that force the same destination port for both
endpoints, i.e. VXLAN and GENEVE.

Actually, lwtunnels could break this assumption if they are configured by
an external control plane to have different destination ports on the
endpoints: in this case, we won't be able to trace ICMP messages back to
them.

For IPv6 redirect messages, call ip6_redirect() directly with the output
interface argument set to the interface we received the packet from (as
it's the very interface we should build the exception on), otherwise the
new nexthop will be rejected. There's no such need for IPv4.

Tunnels can now export an encap_err_lookup() operation that indicates a
match. Pass the packet to the lookup function, and if the tunnel driver
reports a matching association, continue with regular ICMP error handling.

v2:
- Added newline between network and transport header sets in
  __udp{4,6}_lib_err_encap() (David Miller)
- Removed redundant skb_reset_network_header(skb); in
  __udp4_lib_err_encap()
- Removed redundant reassignment of iph in __udp4_lib_err_encap()
  (Sabrina Dubroca)
- Edited comment to __udp{4,6}_lib_err_encap() to reflect the fact this
  won't work with lwtunnels configured to use asymmetric ports. By the way,
  it's VXLAN, not VxLAN (Jiri Benc)
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in dev_err error message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

avoid to compute the hash value if dev is not null, since
hash value is not used
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/broadcom/genet/bcmgenet.c: In function 'bcmgenet_power_down':
drivers/net/ethernet/broadcom/genet/bcmgenet.c:1136:6: warning:
 variable 'ret' set but not used [-Wunused-but-set-variable]

bcmgenet_power_down should return 'ret' instead of 0.

Fixes: ca8cf341 ("net: bcmgenet: propagate errors from bcmgenet_power_down")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net: sched: prepare for more Qdisc offloads

This series refactors the "switchdev" Qdisc offloads a little.  We have
a few Qdiscs which can be fully offloaded today to the forwarding plane
of switching devices.

First patch adds a helper for handing statistic dumps, the code seems
to be copy pasted between PRIO and RED.  Second patch removes unnecessary
parameter from RED offload function.  Third patch makes the MQ offload
use the dump helper which helps it behave much like PRIO and RED when
it comes to the TCQ_F_OFFLOADED flag.  Patch 4 adds a graft helper,
similar to the dump helper.

Patch 5 is unrelated to offloads, qdisc_graft() code seemed ripe for a
small refactor - no functional changes there.

Last two patches move the qdisc_put() call outside of the sch_tree_lock
section for RED and PRIO.  The child Qdiscs will get removed from the
hierarchy under the lock, but having the put (and potentially destroy)
called outside of the lock helps offload which may choose to sleep,
and it should generally lower the Qdisc change impact.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move destroying of the old child qdiscs outside of the sch_tree_lock()
section.  This should improve the software qdisc replace but is even
more important for offloads.  Calling offloads under a spin lock is
best avoided, and child's destroy would be called under sch_tree_lock().
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move destroying of the old child qdisc outside of the sch_tree_lock()
section.  This should improve the software qdisc replace but is even
more important for offloads.  Firstly calling offloads under a spin
lock is best avoided.  Secondly the destroy event of existing child
would have been sent to the offload device before the replace, causing
confusion.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code for grafting Qdiscs when there is a parent has two needless
indentation levels, and breaks the "keep the success path unindented"
guideline.  Refactor.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Qdisc graft operation of offload-capable qdiscs performs a few
extra steps which are identical among all the qdiscs.  Add
a helper to share this code.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

PRIO and RED mark the qdisc with TCQ_F_OFFLOADED upon successful offload,
make MQ do the same.  The consistency will help with consistent
graft callback behaviour.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Offload dump helper does not use opt parameter, remove it.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Qdisc dump operation of offload-capable qdiscs performs a few
extra steps which are identical among all the qdiscs.  Add
a helper to share this code.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
net: phy: improve and simplify phylib state machine

This patch series is based on two axioms:

- During autoneg a PHY always reports the link being down

- Info in clause 22/45 registers doesn't allow to differentiate between
  these two states:
  1. Link is physically down
  2. A link partner is connected and PHY is autonegotiating
  In both cases "link up" and "aneg finished" bits aren't set.
  One consequence is that having separate states PHY_NOLINK and PHY_AN
  isn't needed.

By using these two axioms the state machine can be significantly
simplified.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use phy_check_link_status in more places in the state machine.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After the recent changes in the state machine state PHY_AN isn't used
any longer and can be removed.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In few places in the state machine the state is set to PHY_RUNNING or
PHY_NOLINK after doing a phy_read_status(). So factor this out to
phy_check_link_status().

First use it in phy_start_aneg(): By setting the state to PHY_RUNNING
or PHY_NOLINK directly we can remove the code to handle the case that
we're using interrupts and aneg was finished already.

Definition of phy_link_up and phy_link_down needs to be moved because
they are called in the new function.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If aneg isn't finished yet then the PHY reports the link as down.
There's no benefit in setting the state to PHY_AN because the next
state machine run would set the status to PHY_NOLINK anyway (except
in the meantime aneg has been finished and link is up). Therefore
we can set the state to PHY_RUNNING or PHY_NOLINK directly.

In addition change the do_carrier parameter in phy_link_down() to true.
If carrier was marked as up before (what should never be the case because
PHY was in state PHY_HALTED before) then we should mark it as down now.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If aneg is enabled and the PHY reports the link as up then definitely
aneg finished successfully. Therefore this check is useless and
can be removed.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-11-07

This series contains updates to almost all of the Intel wired LAN
drivers.

Lance Roy replaces a spin lock with lockdep_assert_held() for igbvf
driver in move toward trying to remove spin_is_locked().

Colin Ian King fixes a potential null pointer dereference by adding a
check in ixgbe.  Also fixed the igc driver by properly assigning the
return error code of a function call, so that we can properly check it.

Shannon Nelson updates the ixgbe driver to not block IPsec offload when
in VEPA mode, in VEB mode, IPsec offload is still blocked because the
device drops packets into a black hole.

Jake adds support for software timestamping for packets sent over
ixgbevf.  Also modifies i40e, iavf, igb, igc, and ixgbe to delay calling
skb_tx_timestamp() to the latest point possible, which is just prior to
notifying the hardware of the new Tx packet.

Todd adds the new WoL filter flag so that we properly report that we do
not support this new feature.

YueHaibing from Huawei fixes the igc driver by cleaning up variables
that are not "really" used.

Dan Carpenter cleans up igc whitespace issues.

Miroslav Lichvar fixes e1000e for potential underflow issue in the
timecounter, so modify the driver to use timecounter_cyc2time() to allow
non-monotonic SYSTIM readings.

Sasha provides additional igc cleanups based on community feedback.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John Hurley says:

====================
nfp: add and use tunnel netdev helpers

A recent patch introduced the function netif_is_vxlan() to verify the
tunnel type of a given netdev as vxlan.

Add a similar function to detect geneve netdevs and make use of this
function in the NFP driver. Also make use of the vxlan helper where
applicable.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Offload of geneve decap rules is supported in NFP. Include geneve in the
check for supported types.
Signed-off-by: NJohn Hurley <john.hurley@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>